Fillout settings functions

Settings menu works
Movement working & TMP calibrated
Tip reading sensibily
Accuracy seems ok
Trimmed down overshoot by biasing integral
Saving to flash working, detailed idle
Sleep mode
Description scrolls
Building for DFU working
Motion detection update
Use manual alg instead, using highpass filter, then sum current change vs rolling average
Re-shuffle the pwm code organisation

workspace/TS100/src/Translation.c

@@ -0,0 +1,39 @@
+/*
+ * Translation.c
+ *
+ *  Created on: 31Aug.,2017
+ *      Author: Ben V. Brown
+ */
+
+const char* SettingsLongNames[12] =
+		{
+		/*These are all the help text for all the settings.*/
+		/*All must start with 6 spaces so they come on screen nicely.*/
+		"Power source. Sets cutoff voltage. <DC 10V> <S 3.3V per cell>",
+		"Sleep Temperature <C>",
+		"Sleep Timeout <Minutes>",
+		"Shutdown Timeout <Minutes>",
+		"Motion Sensitivity <0.Off 1.least sensitive 9.most sensitive>",
+		"Display detailed information in a smaller font.",
+		"Display Orientation <A. Automatic L. Left Handed R. Right Handed>",
+		"Enable front key enters boost mode 450C mode when soldering",
+		"Temperature when in \"boost\" mode",
+		"Automatically starts the iron into soldering on power up. T=Soldering, S= Sleep mode,F=Off",
+		"Blink the temperature on the cooling screen while the tip is still hot.",
+		"Reset all settings",
+		};
+
+const char* SettingsShortNames[12] = {
+		"PWRSC ",
+		"STMP ",
+		"STME ",
+		"SHTME ",
+		"MSENSE ",
+		"ADVDSP ",
+		"DSPROT ",
+		"BOOST  ",
+		"BTMP ",
+		"ASTART ",
+		"CLBLNK ",
+		"RESET? "
+		};