diff --git a/Translations/translation_BE.json b/Translations/translation_BE.json index 74a2bae0..5521fe5c 100644 --- a/Translations/translation_BE.json +++ b/Translations/translation_BE.json @@ -8,7 +8,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Пераканайцеся, што пры наступнай загрузцы наканечнік і ручка маюць пакаёвую тэмпературу!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Вы ўпэннены, што жадаеце зкінуць налады да першапачатковых значэнняў?", "UVLOWarningString": "НАПРУГА--", "UndervoltageString": "Нізкая напруга", @@ -20,6 +21,10 @@ "DeviceFailedValidationWarning": "Ваша прылада, хутчэй за ўсё, падробка!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Скід OK", "SettingsResetMessage": [ "Налады", @@ -293,7 +298,7 @@ "Каліброўка тэмпературы", "пры наступнай загрузцы" ], - "desc": "Каліброўка датчыка тэмпературы джала пры наступнай загрузцы (не патрабуецца, калі розніца менш за 5°C" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_BG.json b/Translations/translation_BG.json index d0fffa64..6138c48a 100644 --- a/Translations/translation_BG.json +++ b/Translations/translation_BG.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Сигурни ли сте, че искате да върнете фабричните настройки?", "UVLOWarningString": "Ниско DC Напрежение", "UndervoltageString": "Ниско Напрежение", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Нулиране", "SettingsResetMessage": [ "Настройките бяха", @@ -292,7 +297,7 @@ "Calibrate CJC", "at next boot" ], - "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5 C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_CS.json b/Translations/translation_CS.json index 5a8c5894..cfc18f4b 100644 --- a/Translations/translation_CS.json +++ b/Translations/translation_CS.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Opravdu chcete resetovat zařízení do továrního nastavení?", "UVLOWarningString": "Nízké DC", "UndervoltageString": "Nízké napětí", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Reset OK", "SettingsResetMessage": [ "Nějaká nastavení", @@ -292,7 +297,7 @@ "Calibrate CJC", "at next boot" ], - "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_DA.json b/Translations/translation_DA.json index f71ab4c2..637f2f62 100644 --- a/Translations/translation_DA.json +++ b/Translations/translation_DA.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Sørg for at loddespidsen er ved stuetemperatur, inden næste start!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Er du sikker du vil resette indstillingerne til standard?", "UVLOWarningString": "Lav Volt", "UndervoltageString": "Undervolt", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Din enhed er højst sandsyneligt en Kopivare!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Reset OK", "SettingsResetMessage": [ "Visse indstillinger", @@ -292,7 +297,7 @@ "kalibrere CJK", "under næste opstart" ], - "desc": "Kalibrer spids Cold Junction Kompensation ved næste opstart (ikke påkrævet, hvis Delta T er < 5°C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_DE.json b/Translations/translation_DE.json index 270f94f1..dbda2b9e 100644 --- a/Translations/translation_DE.json +++ b/Translations/translation_DE.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Bitte sicherstellen, dass Lötspitze & Gerät beim nächsten Start Raumtemperatur haben!", + "SettingsCalibrationWarning": "Vor dem Neustart bitte sicherstellen, dass Lötspitze & Gerät Raumtemperatur haben!", + "CJCCalibrating": "kalibriere", "SettingsResetWarning": "Sicher, dass alle Werte zurückgesetzt werden sollen?", "UVLOWarningString": "V niedr.", "UndervoltageString": "Unterspannung", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Höchstwahrscheinlich ist das Gerät eine Fälschung!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Erfolgreich", + "kalibriert!" + ], "ResetOKMessage": "Reset OK", "SettingsResetMessage": [ "Einstellungen", @@ -292,7 +297,7 @@ "Temperatur", "kalibrieren?" ], - "desc": "Kalibrierung der Kaltstellenkompensation beim nächsten Start (nicht nötig wenn Delta T < 5°C)" + "desc": "Beim nächsten Start wird die Kaltstellenkompensation kalibriert (nicht nötig wenn Delta T < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_EL.json b/Translations/translation_EL.json index 41049f46..bde3d875 100644 --- a/Translations/translation_EL.json +++ b/Translations/translation_EL.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": true, "messages": { - "SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Σίγουρα θέλετε επαναφορά αρχικών ρυθμίσεων;", "UVLOWarningString": "Χαμηλ DC", "UndervoltageString": "Υπόταση", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Επαν. OK", "SettingsResetMessage": [ "Κάποιες ρυθμ.", @@ -295,7 +300,7 @@ "Calibrate CJC", "at next boot" ], - "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5 C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_EN.json b/Translations/translation_EN.json index 40794ce4..93e7a35e 100644 --- a/Translations/translation_EN.json +++ b/Translations/translation_EN.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": true, "messages": { - "SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Are you sure you want to restore default settings?", "UVLOWarningString": "DC LOW", "UndervoltageString": "Undervoltage", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Reset OK", "SettingsResetMessage": [ "Certain settings", @@ -292,7 +297,7 @@ "Calibrate CJC", "at next boot" ], - "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_ES.json b/Translations/translation_ES.json index aaebb5a1..d333b82f 100644 --- a/Translations/translation_ES.json +++ b/Translations/translation_ES.json @@ -7,8 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "¡Asegúrate que la punta esté a temperatura ambiente al inicio", - + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "¿Quieres restablecer los ajustes?", "UVLOWarningString": "CC BAJA", "UndervoltageString": "Voltaje bajo", @@ -20,6 +20,10 @@ "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Hecho.", "SettingsResetMessage": [ "Ajustes", @@ -293,10 +297,8 @@ "Calibrar CJC", "en el próximo inicio" - ], - "desc": "Calibrar compensación de punta fría en el próximo inicio (no necesario si Delta T es < 5°C)" - + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_FI.json b/Translations/translation_FI.json index e2d00bf5..48b6408e 100644 --- a/Translations/translation_FI.json +++ b/Translations/translation_FI.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Haluatko varmasti palauttaa oletusarvot?", "UVLOWarningString": "DC ALH.", "UndervoltageString": "Alijännite", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Palautus", "SettingsResetMessage": [ "Asetukset", @@ -292,7 +297,7 @@ "Calibrate CJC", "at next boot" ], - "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_FR.json b/Translations/translation_FR.json index 1e155590..aa63fba7 100644 --- a/Translations/translation_FR.json +++ b/Translations/translation_FR.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Voulez-vous vraiment réinitialiser les paramètres aux valeurs par défaut ?", "UVLOWarningString": "DC FAIBL", "UndervoltageString": "Sous-tension", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Votre appareil semble être une contrefaçon !" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Reset OK", "SettingsResetMessage": [ "Réglages", @@ -292,7 +297,7 @@ "Calibrate CJC", "at next boot" ], - "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_HR.json b/Translations/translation_HR.json index 1b80fe3c..4cedbd07 100644 --- a/Translations/translation_HR.json +++ b/Translations/translation_HR.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Jeste li sigurni da želite sve postavke vratiti na tvorničke vrijednosti?", "UVLOWarningString": "BATERIJA", "UndervoltageString": "PRENIZAK NAPON", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Reset OK", "SettingsResetMessage": [ "Certain settings", @@ -292,7 +297,7 @@ "Calibrate CJC", "at next boot" ], - "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_HU.json b/Translations/translation_HU.json index 926d9fd9..1bd8a4ad 100644 --- a/Translations/translation_HU.json +++ b/Translations/translation_HU.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Biztos visszaállítja a beállításokat alapértékekre?", "UVLOWarningString": "DC TÚL KEVÉS", "UndervoltageString": "Alulfeszültség", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Törlés OK", "SettingsResetMessage": [ "Beállítások", @@ -292,7 +297,7 @@ "Calibrate CJC", "at next boot" ], - "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_IT.json b/Translations/translation_IT.json index 2e7c9d82..3b312b76 100644 --- a/Translations/translation_IT.json +++ b/Translations/translation_IT.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Assicurarsi che la punta e il manico si trovino a temperatura ambiente prima di continuare!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Ripristinare le impostazioni iniziali?", "UVLOWarningString": "DC BASSA", "UndervoltageString": "DC INSUFFICIENTE", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Il dispositivo in uso è molto probabilmente una contraffazione!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Reset OK", "SettingsResetMessage": [ "Impostazioni", @@ -292,7 +297,7 @@ "Calibra T", "all'avvio" ], - "desc": "Compensa l'errore delle rilevazioni della termocoppia al prossimo avvio (non necessario se l'errore su T è <5 °C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_JA_JP.json b/Translations/translation_JA_JP.json index d27299cc..819933c5 100755 --- a/Translations/translation_JA_JP.json +++ b/Translations/translation_JA_JP.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": true, "messages": { - "SettingsCalibrationWarning": "次に電源を入れるときは、コテ先と本体が室温と同じになっていることを確認してください", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "設定をリセットしますか？", "UVLOWarningString": "電圧が低すぎます", "UndervoltageString": "Undervoltage", @@ -19,6 +20,7 @@ "DeviceFailedValidationWarning": "このデバイスはおそらく偽造品です" }, "messagesWarn": { + "CJCCalibrationDone": "Calibration done!", "ResetOKMessage": "リセットOK", "SettingsResetMessage": "初期化されました", "NoAccelerometerMessage": "加速度計未検出", @@ -183,11 +185,8 @@ "desc": "最大電力を制限する " }, "CalibrateCJC": { - "text2": [ - "Calibrate CJC", - "at next boot" - ], - "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)" + "text2": "Calibrate CJC", + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5 C)" }, "VoltageCalibration": { "text2": "電圧校正", diff --git a/Translations/translation_LT.json b/Translations/translation_LT.json index 81a8a403..4680e5f0 100644 --- a/Translations/translation_LT.json +++ b/Translations/translation_LT.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Ar norite atstatyti nustatymus į numatytas reikšmes?", "UVLOWarningString": "MAŽ VOLT", "UndervoltageString": "Žema įtampa", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Atstatyta", "SettingsResetMessage": [ "Nust. atstatyti!", @@ -292,7 +297,7 @@ "Calibrate CJC", "at next boot" ], - "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_NB.json b/Translations/translation_NB.json index 7fc588e9..f98b25ed 100644 --- a/Translations/translation_NB.json +++ b/Translations/translation_NB.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Sørg for at loddespissen har romtemperatur før du fortsetter!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Er du sikker på at du vil tilbakestille til standardinnstillinger?", "UVLOWarningString": "Lavspenn", "UndervoltageString": "Underspenning", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Enheten din er sannsynligvis en forfalskning!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Tilbakestilling OK", "SettingsResetMessage": [ "Noen innstillinger", @@ -292,7 +297,7 @@ "TempKal?", "" ], - "desc": "Kalibrer spiss-temperatur." + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_NL.json b/Translations/translation_NL.json index 02f0c8ee..c31d874b 100644 --- a/Translations/translation_NL.json +++ b/Translations/translation_NL.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Weet je zeker dat je de fabrieksinstellingen terug wilt zetten?", "UVLOWarningString": "DC Laag", "UndervoltageString": "Onderspanning", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Jouw toestel is wellicht een namaak-versie!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Reset OK", "SettingsResetMessage": [ "Instellingen", @@ -292,7 +297,7 @@ "Calibrate CJC", "at next boot" ], - "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_NL_BE.json b/Translations/translation_NL_BE.json index 44f6349a..0e6a253a 100644 --- a/Translations/translation_NL_BE.json +++ b/Translations/translation_NL_BE.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Ben je zeker dat je alle standaardwaarden wil resetten?", "UVLOWarningString": "Voedingsspanning LAAG", "UndervoltageString": "Onderspanning", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Reset OK", "SettingsResetMessage": [ "Certain settings", @@ -292,7 +297,7 @@ "Calibrate CJC", "at next boot" ], - "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_PL.json b/Translations/translation_PL.json index 5dd59248..c12fb1b3 100644 --- a/Translations/translation_PL.json +++ b/Translations/translation_PL.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Upewnij się, że końcówka i uchwyt mają temperaturę pokojową podczas następnego rozruchu!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Czy na pewno chcesz przywrócić ustawienia fabryczne?", "UVLOWarningString": "NIS. NAP", "UndervoltageString": "Zbyt niskie nap.", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Twoje urządzenie jest najprawdopodobniej podróbką!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Reset OK", "SettingsResetMessage": [ "Ust. zresetowane", @@ -292,7 +297,7 @@ "Kalibracja temperatury", "przy następnym uruchomieniu" ], - "desc": "Kalibracja czujnika temperatury końcówki przy następnym rozruchu (nie jest wymagana, jeśli różnica jest mniejsza niż 5°C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_PT.json b/Translations/translation_PT.json index 29f806a4..f7f6a3eb 100644 --- a/Translations/translation_PT.json +++ b/Translations/translation_PT.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Definições de fábrica?", "UVLOWarningString": "DC BAIXO", "UndervoltageString": "Subtensão", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Reset OK", "SettingsResetMessage": [ "Certain settings", @@ -292,7 +297,7 @@ "Calibrate CJC", "at next boot" ], - "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_RO.json b/Translations/translation_RO.json index cf55879d..9f18440d 100644 --- a/Translations/translation_RO.json +++ b/Translations/translation_RO.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": true, "messages": { - "SettingsCalibrationWarning": "Vă rugăm să vă asigurati că vârful si mânerul sunt la temperatura camerei la următoarea pornire!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Sigur doriti să restaurati la setările implicite?", "UVLOWarningString": "DC LOW", "UndervoltageString": "Sub tensiune", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Reset OK", "SettingsResetMessage": [ "Setările au fost", @@ -292,7 +297,7 @@ "Calibrare CJC", "la următoarea pornire" ], - "desc": "Calibrati vârful Cold Junction Compensation la următoarea pornire (nu este necesar dacă Delta T este < 5°C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_RU.json b/Translations/translation_RU.json index 318b309d..8bdd5adf 100644 --- a/Translations/translation_RU.json +++ b/Translations/translation_RU.json @@ -8,7 +8,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Пожалуйста, убедитесь, что жало и корпус имеют комнатную температуру при следующей загрузке!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Вы уверены, что хотите сбросить настройки к значениям по умолчанию?", "UVLOWarningString": "НАПРЯЖ--", "UndervoltageString": "Низ. напряжение", @@ -20,6 +21,10 @@ "DeviceFailedValidationWarning": "Скорее всего, это устройство подделка!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Сброс OK", "SettingsResetMessage": [ "Настройки", @@ -293,7 +298,7 @@ "Калибровка", "температуры" ], - "desc": "Калибровка датчика температуры жала при следующей загрузке (не требуется, если разница менее 5°C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_SK.json b/Translations/translation_SK.json index 894be258..be685f1f 100644 --- a/Translations/translation_SK.json +++ b/Translations/translation_SK.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Naozaj chcete obnoviť továrenské nastavenia?", "UVLOWarningString": "Nízke U!", "UndervoltageString": "Nízke napätie", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Vaše zariadenie je pravdepodobne falzifikát!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Reset OK", "SettingsResetMessage": [ "Nastavenia", @@ -292,7 +297,7 @@ "Calibrate CJC", "at next boot" ], - "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_SL.json b/Translations/translation_SL.json index cd398186..7198133f 100644 --- a/Translations/translation_SL.json +++ b/Translations/translation_SL.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Res želite ponastaviti na privzete nastavitve?", "UVLOWarningString": "NIZKA U", "UndervoltageString": "Nizka napetost", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Reset OK", "SettingsResetMessage": [ "Nastavitve OK!", @@ -292,7 +297,7 @@ "Calibrate CJC", "at next boot" ], - "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_SR_CYRL.json b/Translations/translation_SR_CYRL.json index ee2b472b..3ea39458 100644 --- a/Translations/translation_SR_CYRL.json +++ b/Translations/translation_SR_CYRL.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Да ли заиста желите да вратите поставке на фабричке вредности?", "UVLOWarningString": "НИЗ.НАП.", "UndervoltageString": "ПРЕНИЗАК НАПОН", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Reset OK", "SettingsResetMessage": [ "Certain settings", @@ -292,7 +297,7 @@ "Calibrate CJC", "at next boot" ], - "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5 C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_SR_LATN.json b/Translations/translation_SR_LATN.json index 59437fe8..4be7ee9d 100644 --- a/Translations/translation_SR_LATN.json +++ b/Translations/translation_SR_LATN.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Da li zaista želite da vratite postavke na fabričke vrednosti?", "UVLOWarningString": "NIZ.NAP.", "UndervoltageString": "PRENIZAK NAPON", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Reset OK", "SettingsResetMessage": [ "Certain settings", @@ -292,7 +297,7 @@ "Calibrate CJC", "at next boot" ], - "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_SV.json b/Translations/translation_SV.json index 20ca5bb0..e868d9a4 100644 --- a/Translations/translation_SV.json +++ b/Translations/translation_SV.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Är du säker på att du vill återställa inställningarna?", "UVLOWarningString": "DC LÅG", "UndervoltageString": "Underspänning", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Reset OK", "SettingsResetMessage": [ "Inställningar", @@ -292,7 +297,7 @@ "Calibrate CJC", "at next boot" ], - "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_TR.json b/Translations/translation_TR.json index f0b34bee..9c41a0e6 100644 --- a/Translations/translation_TR.json +++ b/Translations/translation_TR.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Ayarları varsayılan değerlere sıfırlamak istediğinizden emin misiniz?", "UVLOWarningString": "Güç Az", "UndervoltageString": "Düşük Voltaj", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Sıfırlama Tamam", "SettingsResetMessage": [ "Ayarlar", @@ -292,7 +297,7 @@ "Calibrate CJC", "at next boot" ], - "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_UK.json b/Translations/translation_UK.json index e3a5b159..fefe5f41 100644 --- a/Translations/translation_UK.json +++ b/Translations/translation_UK.json @@ -8,7 +8,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Під час наступного завантаження переконайтеся, що жало і ручка мають кімнатну температуру!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Ви дійсно хочете скинути налаштування до значень за замовчуванням? (A=Так, В=Ні)", "UVLOWarningString": "АККУМ--", "UndervoltageString": "Низька напруга", @@ -20,6 +21,10 @@ "DeviceFailedValidationWarning": "Ваш пристрій, швидше за все, підробка!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Скид. OK", "SettingsResetMessage": [ "Налаштування", @@ -293,7 +298,7 @@ "Калібрувати КХС", "при наступному завантаженні" ], - "desc": "Калібрувати Компенсацію Холодного Спаю жала при наступному завантаженні(непотрібне при різниці температур < 5°C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_VI.json b/Translations/translation_VI.json index 52a04b4f..4b49a1af 100644 --- a/Translations/translation_VI.json +++ b/Translations/translation_VI.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "Ban chac chan muon khôi phuc tat ca cài đat ve mac đinh?", "UVLOWarningString": "DC thap", "UndervoltageString": "Đien áp thap", @@ -19,6 +20,10 @@ "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { + "CJCCalibrationDone": [ + "Calibration", + "done!" + ], "ResetOKMessage": "Reset OK", "SettingsResetMessage": [ "Mot so cài đat", @@ -292,7 +297,7 @@ "Calibrate CJC", "at next boot" ], - "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_YUE_HK.json b/Translations/translation_YUE_HK.json index 86643600..337fb037 100644 --- a/Translations/translation_YUE_HK.json +++ b/Translations/translation_YUE_HK.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": true, "messages": { - "SettingsCalibrationWarning": "喺下次開機嗰陣時，請確定焫雞咀同機身都係處於室温！", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "你係咪確定要將全部設定重設到預設值？", "UVLOWarningString": "電壓過低", "UndervoltageString": "Undervoltage", @@ -19,6 +20,7 @@ "DeviceFailedValidationWarning": "依支焫雞好有可能係冒牌貨！" }, "messagesWarn": { + "CJCCalibrationDone": "Calibration done!", "ResetOKMessage": "已重設！", "SettingsResetMessage": "設定已被重設！", "NoAccelerometerMessage": "未能偵測加速度計", @@ -181,7 +183,7 @@ }, "CalibrateCJC": { "text2": "校正CJC", - "desc": "喺下次開機時校正焫雞咀熱電偶温度感應嘅冷接點補償（温度差低過攝氏5度嘅話唔使校正）" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5 C)" }, "VoltageCalibration": { "text2": "輸入電壓校正？", diff --git a/Translations/translation_ZH_CN.json b/Translations/translation_ZH_CN.json index 8fa01cf8..6700d4c2 100644 --- a/Translations/translation_ZH_CN.json +++ b/Translations/translation_ZH_CN.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": true, "messages": { - "SettingsCalibrationWarning": "于下次开机时，请确定烙铁头和机身均处于室温！", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "你是否确定要将全部设定重置为默认值？", "UVLOWarningString": "电压过低", "UndervoltageString": "Undervoltage", @@ -19,6 +20,7 @@ "DeviceFailedValidationWarning": "这支电烙铁很有可能是冒牌货！" }, "messagesWarn": { + "CJCCalibrationDone": "Calibration done!", "ResetOKMessage": "已重置！", "SettingsResetMessage": "设定已被重置！", "NoAccelerometerMessage": "未检测到加速度计", @@ -181,7 +183,7 @@ }, "CalibrateCJC": { "text2": "校正CJC", - "desc": "于下次开机时校正烙铁头热电偶温度感应的冷接点补偿（温度差低于摄氏5度的话则无需校正）" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5 C)" }, "VoltageCalibration": { "text2": "输入电压校正？", diff --git a/Translations/translation_ZH_TW.json b/Translations/translation_ZH_TW.json index 3627a5e3..4fb0906f 100644 --- a/Translations/translation_ZH_TW.json +++ b/Translations/translation_ZH_TW.json @@ -7,7 +7,8 @@ ], "tempUnitFahrenheit": true, "messages": { - "SettingsCalibrationWarning": "於下次開機時，請確定烙鐵頭和機身均處於室溫！", + "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", + "CJCCalibrating": "calibrating", "SettingsResetWarning": "你是否確定要將全部設定重設到預設值？", "UVLOWarningString": "電壓過低", "UndervoltageString": "Undervoltage", @@ -19,6 +20,7 @@ "DeviceFailedValidationWarning": "這支電烙鐵很有可能是冒牌貨！" }, "messagesWarn": { + "CJCCalibrationDone": "Calibration done!", "ResetOKMessage": "已重設！", "SettingsResetMessage": "設定已被重設！", "NoAccelerometerMessage": "未能偵測加速度計", @@ -181,7 +183,7 @@ }, "CalibrateCJC": { "text2": "校正CJC", - "desc": "於下次開機時校正烙鐵頭熱電偶溫度感應的冷接點補償（溫度差低於攝氏5度的話則無需校正）" + "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5 C)" }, "VoltageCalibration": { "text2": "輸入電壓校正？", diff --git a/Translations/translations_def.js b/Translations/translations_def.js index 16f35951..e465c2a8 100644 --- a/Translations/translations_def.js +++ b/Translations/translations_def.js @@ -4,6 +4,10 @@ var def = /// "id": "SettingsCalibrationWarning", "description": "Confirmation message shown before performing an offset calibration. Should warn the user to make sure tip and handle are at the same temperature." }, + { + "id": "CJCCalibrating", + "description": "Message indicating CJC is being calibrated." + }, { "id": "SettingsResetWarning", "description": "Confirmation message shown before confirming a settings reset." @@ -51,6 +55,10 @@ var def = /// } ], "messagesWarn": [{ + "id": "CJCCalibrationDone", + "description": "Confirmation message indicating CJC calibration is complete." + }, + { "id": "SettingsResetMessage", "description": "Shown when the settings are reset to factory defaults either by the user or by incompatible firmware changes." }, diff --git a/source/Core/Inc/Translation.h b/source/Core/Inc/Translation.h index 329a2218..3235237c 100644 --- a/source/Core/Inc/Translation.h +++ b/source/Core/Inc/Translation.h @@ -74,6 +74,7 @@ enum class SettingsItemIndex : uint8_t { struct TranslationIndexTable { uint16_t SettingsCalibrationWarning; + uint16_t CJCCalibrating; uint16_t SettingsResetWarning; uint16_t UVLOWarningString; uint16_t UndervoltageString; @@ -85,6 +86,7 @@ struct TranslationIndexTable { uint16_t OffString; uint16_t DeviceFailedValidationWarning; + uint16_t CJCCalibrationDone; uint16_t SettingsResetMessage; uint16_t NoAccelerometerMessage; uint16_t NoPowerDeliveryMessage; diff --git a/source/Core/Threads/GUIThread.cpp b/source/Core/Threads/GUIThread.cpp index 4164e113..01690394 100644 --- a/source/Core/Threads/GUIThread.cpp +++ b/source/Core/Threads/GUIThread.cpp @@ -85,3 +85,4 @@ void startGUITask(void const *argument) { drawHomeScreen(buttonLockout); } +setoffset \ No newline at end of file