sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity

./workspace/TS100 -> ./source/

Browse Source
This commit is contained in:
Ben V. Brown
2021-01-17 09:43:55 +11:00
parent ad37c752cc
commit 184b2c909f
325 changed files with 41 additions and 441 deletions
Download Patch File Download Diff File Expand all files Collapse all files

28
source/Core/Inc/FreeRTOSHooks.h Normal file
View File

@@ -0,0 +1,28 @@
/*
* FreeRTOSHooks.h
*
* Created on: 29 May 2020
* Author: Ralim
*/
#ifndef INC_FREERTOSHOOKS_H_
#define INC_FREERTOSHOOKS_H_
#include "FreeRTOS.h"
#include "cmsis_os.h"
#include "unit.h"
#ifdef __cplusplus
extern "C" {
#endif
// RToS
void vApplicationGetIdleTaskMemory(StaticTask_t **ppxIdleTaskTCBBuffer,
StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize);
void vApplicationIdleHook(void);
#ifdef __cplusplus
}
#endif
#endif /* INC_FREERTOSHOOKS_H_ */

21
source/Core/Inc/QC3.h Normal file
View File

@@ -0,0 +1,21 @@
/*
* QC3.h
*
* Created on: 29 May 2020
* Author: Ralim
*/
#ifndef INC_QC3_H_
#define INC_QC3_H_
#include "stdint.h"
#ifdef __cplusplus
extern "C" {
#endif
void seekQC(int16_t Vx10, uint16_t divisor);
void startQC(uint16_t divisor); // Tries to negotiate QC for highest voltage, must be run after
bool hasQCNegotiated();// Returns true if a QC negotiation worked (we are using QC)
#ifdef __cplusplus
}
#endif
#endif /* INC_QC3_H_ */

75
source/Core/Inc/Settings.h Normal file
View File

@@ -0,0 +1,75 @@
/*
* Settings.h
*
* Created on: 29 Sep 2016
* Author: Ralim
*
* Houses the system settings and allows saving / restoring from flash
*/
#ifndef SETTINGS_H_
#define SETTINGS_H_
#include <stdint.h>
#include "unit.h"
#define SETTINGSVERSION (0x24)
/*Change this if you change the struct below to prevent people getting \
out of sync*/
/*
* This struct must be a multiple of 2 bytes as it is saved / restored from
* flash in uint16_t chunks
*/
typedef struct {
uint8_t version; // Used to track if a reset is needed on firmware upgrade
uint16_t SolderingTemp; // current set point for the iron
uint16_t SleepTemp; // temp to drop to in sleep
uint8_t SleepTime; // minutes timeout to sleep
uint8_t minDCVoltageCells; // The voltage we cut out at for under voltage when powered by DC jack
uint8_t QCIdealVoltage; // Desired QC3.0 voltage (9,12,20V)
uint8_t OrientationMode :2; // Selects between Auto,Right and left handed layouts
uint8_t sensitivity :4; // Sensitivity of accelerometer (5 bits)
uint8_t autoStartMode :2; // Should the unit automatically jump straight
// into soldering mode when power is applied
uint8_t ShutdownTime; // Time until unit shuts down if left alone
uint8_t coolingTempBlink :1; // Should the temperature blink on the cool
// down screen until its <50C
uint8_t detailedIDLE :1; // Detailed idle screen
uint8_t detailedSoldering :1; // Detailed soldering screens
#ifdef ENABLED_FAHRENHEIT_SUPPORT
uint8_t temperatureInF :1; // Should the temp be in F or C (true is F)
#endif
uint8_t descriptionScrollSpeed :1; // Description scroll speed
uint8_t lockingMode :2; // Store the locking mode
uint8_t KeepAwakePulse; // Keep Awake pulse power in 0.1 watts (10 = 1Watt)
uint16_t voltageDiv; // Voltage divisor factor
uint16_t BoostTemp; // Boost mode set point for the iron
uint16_t CalibrationOffset; // This stores the temperature offset for this tip
// in the iron.
uint8_t powerLimit; // Maximum power iron allowed to output
uint8_t ReverseButtonTempChangeEnabled; // Change the plus and minus button assigment
uint16_t TempChangeLongStep; // Change the plus and minus button assigment
uint16_t TempChangeShortStep; // Change the plus and minus button assigment
uint8_t hallEffectSensitivity; //Operating mode of the hall effect sensor
uint8_t accelMissingWarningCounter; // Counter of how many times we have warned we cannot detect the accelerometer
uint8_t pdMissingWarningCounter; // Counter of how many times we have warned we cannot detect the pd interface
uint32_t padding; // This is here for in case we are not an even divisor so
// that nothing gets cut off
//MUST BE LAST
} systemSettingsType;
extern volatile systemSettingsType systemSettings;
void saveSettings();
bool restoreSettings();
uint8_t lookupVoltageLevel();
uint16_t lookupHallEffectThreshold();
void resetSettings();
#endif /* SETTINGS_H_ */

85
source/Core/Inc/Translation.h Normal file
View File

@@ -0,0 +1,85 @@
/*
* Translation.h
*
* Created on: 31Aug.,2017
* Author: Ben V. Brown
*/
#ifndef TRANSLATION_H_
#define TRANSLATION_H_
#include "unit.h"
#include "stdint.h"
extern const uint8_t USER_FONT_12[];
extern const uint8_t USER_FONT_6x8[];
extern const char *SettingsShortNames[29][2];
extern const char *SettingsDescriptions[29];
extern const char *SettingsMenuEntries[4];
extern const char *SettingsCalibrationDone;
extern const char *SettingsCalibrationWarning;
extern const char *SettingsResetWarning;
extern const char *UVLOWarningString;
extern const char *UndervoltageString;
extern const char *InputVoltageString;
extern const char *WarningTipTempString;
extern const char *BadTipString;
extern const char *SleepingSimpleString;
extern const char *SleepingAdvancedString;
extern const char *WarningSimpleString;
extern const char *WarningAdvancedString;
extern const char *SleepingTipAdvancedString;
extern const char *IdleTipString;
extern const char *IdleSetString;
extern const char *TipDisconnectedString;
extern const char *SolderingAdvancedPowerPrompt;
extern const char *OffString;
extern const char *ResetOKMessage;
extern const char *YourGainMessage;
extern const char *SettingsResetMessage;
extern const char *NoAccelerometerMessage;
extern const char *NoPowerDeliveryMessage;
extern const char *LockingKeysString;
extern const char *UnlockingKeysString;
extern const char *WarningKeysLockedString;
extern const char *SettingTrueChar;
extern const char *SettingFalseChar;
extern const char *SettingRightChar;
extern const char *SettingLeftChar;
extern const char *SettingAutoChar;
extern const char *SettingStartSolderingChar;
extern const char *SettingStartSleepChar;
extern const char *SettingStartSleepOffChar;
extern const char *SettingStartNoneChar;
extern const char *SettingSensitivityOff;
extern const char *SettingSensitivityLow;
extern const char *SettingSensitivityMedium;
extern const char *SettingSensitivityHigh;
extern const char *SettingLockDisableChar;
extern const char *SettingLockBoostChar;
extern const char *SettingLockFullChar;
extern const char *SettingFastChar;
extern const char *SettingSlowChar;
extern const char *TipModelStrings[];
extern const char *DebugMenu[];
extern const char *SymbolPlus;
extern const char *SymbolMinus;
extern const char *SymbolSpace;
extern const char *SymbolDot;
extern const char *SymbolDegC;
#ifdef ENABLED_FAHRENHEIT_SUPPORT
extern const char *SymbolDegF;
#endif
extern const char *SymbolMinutes;
extern const char *SymbolSeconds;
extern const char *SymbolWatts;
extern const char *SymbolVolts;
extern const char *SymbolDC;
extern const char *SymbolCellCount;
extern const char *SymbolVersionNumber;
extern const char *DebugMenu[];
#endif /* TRANSLATION_H_ */

24
source/Core/Inc/expMovingAverage.h Normal file
View File

@@ -0,0 +1,24 @@
/*
* expMovingAverage.h
*
* Created on: 8 Oct 2019
* Author: ralim
*/
#ifndef INC_EXPMOVINGAVERAGE_H_
#define INC_EXPMOVINGAVERAGE_H_
// max size = 127
template<class T, uint8_t weighting>
struct expMovingAverage {
int32_t sum;
void update(T const val) {
sum = ((val * weighting) + (sum * (256 - weighting))) / 256;
}
T average() const {
return sum;
}
};
#endif /* INC_EXPMOVINGAVERAGE_H_ */

34
source/Core/Inc/gui.hpp Normal file
View File

@@ -0,0 +1,34 @@
/*
* gui.h
*
* Created on: 3Sep.,2017
* Author: Ben V. Brown
*/
#ifndef GUI_HPP_
#define GUI_HPP_
#include "Translation.h"
#include "Settings.h"
#include "BSP.h"
#define PRESS_ACCEL_STEP 30
#define PRESS_ACCEL_INTERVAL_MIN 100
#define PRESS_ACCEL_INTERVAL_MAX 300
//GUI holds the menu structure and all its methods for the menu itself
//Declarations for all the methods for the settings menu (at end of this file)
//Struct for holding the function pointers and descriptions
typedef struct {
const char *description;
// return true if increment reached the maximum value
bool (* const incrementHandler)(void);
void (* const draw)(void);
} menuitem;
void enterSettingsMenu();
void GUIDelay();
extern const menuitem rootSettingsMenu[];
#endif /* GUI_HPP_ */

41
source/Core/Inc/history.hpp Normal file
View File

@@ -0,0 +1,41 @@
/*
* history.hpp
*
* Created on: 28 Oct, 2018
* Authors: Ben V. Brown, David Hilton
*/
#ifndef HISTORY_HPP_
#define HISTORY_HPP_
#include <stdint.h>
// max size = 127
template<class T, uint8_t SIZE>
struct history {
static const uint8_t size = SIZE;
T buf[size];
int32_t sum;
uint8_t loc;
void update(T const val) {
// step backwards so i+1 is the previous value.
sum -= buf[loc];
sum += val;
buf[loc] = val;
loc = (loc + 1) % size;
}
T operator[](uint8_t i) const {
// 0 = newest, size-1 = oldest.
i = (i + loc) % size;
return buf[i];
}
T average() const {
return sum / size;
}
};
#endif /* HISTORY_HPP_ */

30
source/Core/Inc/main.hpp Normal file
View File

@@ -0,0 +1,30 @@
#ifndef __MAIN_H
#define __MAIN_H
#include "OLED.hpp"
#include "Setup.h"
extern uint8_t DetectedAccelerometerVersion;
extern uint32_t currentTempTargetDegC;
extern bool settingsWereReset;
extern bool usb_pd_available;
#ifdef __cplusplus
extern "C" {
#endif
void vApplicationStackOverflowHook(TaskHandle_t *pxTask,
signed portCHAR *pcTaskName);
#define NO_DETECTED_ACCELEROMETER 99
#define ACCELEROMETERS_SCANNING 100
//Threads
void startGUITask(void const *argument);
void startPIDTask(void const *argument);
void startMOVTask(void const *argument);
void startPOWTask(void const *argument);
extern TaskHandle_t pidTaskNotification;
extern uint8_t accelInit;
extern TickType_t lastMovementTime;
#ifdef __cplusplus
}
#endif
#endif /* __MAIN_H */

28
source/Core/Inc/power.hpp Normal file
View File

@@ -0,0 +1,28 @@
/*
* Power.hpp
*
* Created on: 28 Oct, 2018
* Authors: Ben V. Brown, David Hilton (David's Idea)
*/
#include "stdint.h"
#include <history.hpp>
#include "BSP.h"
#include "expMovingAverage.h"
#include "../../configuration.h"
#ifndef POWER_HPP_
#define POWER_HPP_
// thermal mass = 1690 milliJ/*C for my tip.
// -> Wattsx10*Seconds to raise Temp from room temp to +100*C, divided by 100*C.
// we divide mass by 20 to let the I term dominate near the set point.
// This is necessary because of the temp noise and thermal lag in the system.
// Once we have feed-forward temp estimation we should be able to better tune this.
const uint8_t wattHistoryFilter = 24; // I term look back weighting
extern expMovingAverage<uint32_t, wattHistoryFilter> x10WattHistory;
int32_t tempToX10Watts(int32_t rawTemp);
void setTipX10Watts(int32_t mw);
uint8_t X10WattsToPWM(int32_t milliWatts, uint8_t sample = 0);
#endif /* POWER_HPP_ */

364
source/Core/Inc/stm32f1xx_hal_conf.h Normal file
View File

@@ -0,0 +1,364 @@
/**
******************************************************************************
* @file stm32f1xx_hal_conf.h
* @brief HAL configuration file.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_HAL_CONF_H
#define __STM32F1xx_HAL_CONF_H
#ifdef __cplusplus
extern "C" {
#endif
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* ########################## Module Selection ############################## */
/**
* @brief This is the list of modules to be used in the HAL driver
*/
#define HAL_MODULE_ENABLED
#define HAL_ADC_MODULE_ENABLED
/*#define HAL_CRYP_MODULE_ENABLED */
/*#define HAL_CAN_MODULE_ENABLED */
/*#define HAL_CEC_MODULE_ENABLED */
/*#define HAL_CORTEX_MODULE_ENABLED */
/*#define HAL_CRC_MODULE_ENABLED */
/*#define HAL_DAC_MODULE_ENABLED */
#define HAL_DMA_MODULE_ENABLED
/*#define HAL_ETH_MODULE_ENABLED */
/*#define HAL_FLASH_MODULE_ENABLED */
#define HAL_GPIO_MODULE_ENABLED
#define HAL_I2C_MODULE_ENABLED
/*#define HAL_I2S_MODULE_ENABLED */
/*#define HAL_IRDA_MODULE_ENABLED */
#define HAL_IWDG_MODULE_ENABLED
/*#define HAL_NOR_MODULE_ENABLED */
/*#define HAL_NAND_MODULE_ENABLED */
/*#define HAL_PCCARD_MODULE_ENABLED */
/*#define HAL_PCD_MODULE_ENABLED */
/*#define HAL_HCD_MODULE_ENABLED */
/*#define HAL_PWR_MODULE_ENABLED */
/*#define HAL_RCC_MODULE_ENABLED */
/*#define HAL_RTC_MODULE_ENABLED */
/*#define HAL_SD_MODULE_ENABLED */
/*#define HAL_MMC_MODULE_ENABLED */
/*#define HAL_SDRAM_MODULE_ENABLED */
/*#define HAL_SMARTCARD_MODULE_ENABLED */
/*#define HAL_SPI_MODULE_ENABLED */
/*#define HAL_SRAM_MODULE_ENABLED */
#define HAL_TIM_MODULE_ENABLED
/*#define HAL_UART_MODULE_ENABLED */
/*#define HAL_USART_MODULE_ENABLED */
/*#define HAL_WWDG_MODULE_ENABLED */
#define HAL_CORTEX_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_FLASH_MODULE_ENABLED
#define HAL_GPIO_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
/* ########################## Oscillator Values adaptation ####################*/
/**
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
*/
#if !defined (HSE_VALUE)
#define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#if !defined (HSE_STARTUP_TIMEOUT)
#define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */
/**
* @brief Internal High Speed oscillator (HSI) value.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
*/
#if !defined (HSI_VALUE)
#define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
/**
* @brief Internal Low Speed oscillator (LSI) value.
*/
#if !defined (LSI_VALUE)
#define LSI_VALUE 40000U /*!< LSI Typical Value in Hz */
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
in voltage and temperature. */
/**
* @brief External Low Speed oscillator (LSE) value.
* This value is used by the UART, RTC HAL module to compute the system frequency
*/
#if !defined (LSE_VALUE)
#define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/
#endif /* LSE_VALUE */
#if !defined (LSE_STARTUP_TIMEOUT)
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */
/* Tip: To avoid modifying this file each time you need to use different HSE,
=== you can define the HSE value in your toolchain compiler preprocessor. */
/* ########################### System Configuration ######################### */
/**
* @brief This is the HAL system configuration section
*/
#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
#define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority (lowest by default) */
#define USE_RTOS 0
#define PREFETCH_ENABLE 1
/* ########################## Assert Selection ############################## */
/**
* @brief Uncomment the line below to expanse the "assert_param" macro in the
* HAL drivers code
*/
/* #define USE_FULL_ASSERT 1 */
/* ################## Ethernet peripheral configuration ##################### */
/* Section 1 : Ethernet peripheral configuration */
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
#define MAC_ADDR0 2
#define MAC_ADDR1 0
#define MAC_ADDR2 0
#define MAC_ADDR3 0
#define MAC_ADDR4 0
#define MAC_ADDR5 0
/* Definition of the Ethernet driver buffers size and count */
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
#define ETH_RXBUFNB ((uint32_t)8) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
#define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
/* Section 2: PHY configuration section */
/* DP83848_PHY_ADDRESS Address*/
#define DP83848_PHY_ADDRESS 0x01U
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
#define PHY_RESET_DELAY ((uint32_t)0x000000FF)
/* PHY Configuration delay */
#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF)
#define PHY_READ_TO ((uint32_t)0x0000FFFF)
#define PHY_WRITE_TO ((uint32_t)0x0000FFFF)
/* Section 3: Common PHY Registers */
#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */
#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
/* Section 4: Extended PHY Registers */
#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
/* Includes ------------------------------------------------------------------*/
/**
* @brief Include module's header file
*/
#ifdef HAL_RCC_MODULE_ENABLED
#include "stm32f1xx_hal_rcc.h"
#endif /* HAL_RCC_MODULE_ENABLED */
#ifdef HAL_GPIO_MODULE_ENABLED
#include "stm32f1xx_hal_gpio.h"
#endif /* HAL_GPIO_MODULE_ENABLED */
#ifdef HAL_DMA_MODULE_ENABLED
#include "stm32f1xx_hal_dma.h"
#endif /* HAL_DMA_MODULE_ENABLED */
#ifdef HAL_ETH_MODULE_ENABLED
#include "stm32f1xx_hal_eth.h"
#endif /* HAL_ETH_MODULE_ENABLED */
#ifdef HAL_CAN_MODULE_ENABLED
#include "stm32f1xx_hal_can.h"
#endif /* HAL_CAN_MODULE_ENABLED */
#ifdef HAL_CEC_MODULE_ENABLED
#include "stm32f1xx_hal_cec.h"
#endif /* HAL_CEC_MODULE_ENABLED */
#ifdef HAL_CORTEX_MODULE_ENABLED
#include "stm32f1xx_hal_cortex.h"
#endif /* HAL_CORTEX_MODULE_ENABLED */
#ifdef HAL_ADC_MODULE_ENABLED
#include "stm32f1xx_hal_adc.h"
#endif /* HAL_ADC_MODULE_ENABLED */
#ifdef HAL_CRC_MODULE_ENABLED
#include "stm32f1xx_hal_crc.h"
#endif /* HAL_CRC_MODULE_ENABLED */
#ifdef HAL_DAC_MODULE_ENABLED
#include "stm32f1xx_hal_dac.h"
#endif /* HAL_DAC_MODULE_ENABLED */
#ifdef HAL_FLASH_MODULE_ENABLED
#include "stm32f1xx_hal_flash.h"
#endif /* HAL_FLASH_MODULE_ENABLED */
#ifdef HAL_SRAM_MODULE_ENABLED
#include "stm32f1xx_hal_sram.h"
#endif /* HAL_SRAM_MODULE_ENABLED */
#ifdef HAL_NOR_MODULE_ENABLED
#include "stm32f1xx_hal_nor.h"
#endif /* HAL_NOR_MODULE_ENABLED */
#ifdef HAL_I2C_MODULE_ENABLED
#include "stm32f1xx_hal_i2c.h"
#endif /* HAL_I2C_MODULE_ENABLED */
#ifdef HAL_I2S_MODULE_ENABLED
#include "stm32f1xx_hal_i2s.h"
#endif /* HAL_I2S_MODULE_ENABLED */
#ifdef HAL_IWDG_MODULE_ENABLED
#include "stm32f1xx_hal_iwdg.h"
#endif /* HAL_IWDG_MODULE_ENABLED */
#ifdef HAL_PWR_MODULE_ENABLED
#include "stm32f1xx_hal_pwr.h"
#endif /* HAL_PWR_MODULE_ENABLED */
#ifdef HAL_RTC_MODULE_ENABLED
#include "stm32f1xx_hal_rtc.h"
#endif /* HAL_RTC_MODULE_ENABLED */
#ifdef HAL_PCCARD_MODULE_ENABLED
#include "stm32f1xx_hal_pccard.h"
#endif /* HAL_PCCARD_MODULE_ENABLED */
#ifdef HAL_SD_MODULE_ENABLED
#include "stm32f1xx_hal_sd.h"
#endif /* HAL_SD_MODULE_ENABLED */
#ifdef HAL_MMC_MODULE_ENABLED
#include "stm32f1xx_hal_mmc.h"
#endif /* HAL_MMC_MODULE_ENABLED */
#ifdef HAL_NAND_MODULE_ENABLED
#include "stm32f1xx_hal_nand.h"
#endif /* HAL_NAND_MODULE_ENABLED */
#ifdef HAL_SPI_MODULE_ENABLED
#include "stm32f1xx_hal_spi.h"
#endif /* HAL_SPI_MODULE_ENABLED */
#ifdef HAL_TIM_MODULE_ENABLED
#include "stm32f1xx_hal_tim.h"
#endif /* HAL_TIM_MODULE_ENABLED */
#ifdef HAL_UART_MODULE_ENABLED
#include "stm32f1xx_hal_uart.h"
#endif /* HAL_UART_MODULE_ENABLED */
#ifdef HAL_USART_MODULE_ENABLED
#include "stm32f1xx_hal_usart.h"
#endif /* HAL_USART_MODULE_ENABLED */
#ifdef HAL_IRDA_MODULE_ENABLED
#include "stm32f1xx_hal_irda.h"
#endif /* HAL_IRDA_MODULE_ENABLED */
#ifdef HAL_SMARTCARD_MODULE_ENABLED
#include "stm32f1xx_hal_smartcard.h"
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
#ifdef HAL_WWDG_MODULE_ENABLED
#include "stm32f1xx_hal_wwdg.h"
#endif /* HAL_WWDG_MODULE_ENABLED */
#ifdef HAL_PCD_MODULE_ENABLED
#include "stm32f1xx_hal_pcd.h"
#endif /* HAL_PCD_MODULE_ENABLED */
#ifdef HAL_HCD_MODULE_ENABLED
#include "stm32f1xx_hal_hcd.h"
#endif /* HAL_HCD_MODULE_ENABLED */
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
/**
* @brief The assert_param macro is used for function's parameters check.
* @param expr: If expr is false, it calls assert_failed function
* which reports the name of the source file and the source
* line number of the call that failed.
* If expr is true, it returns no value.
* @retval None
*/
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
void assert_failed(uint8_t* file, uint32_t line);
#else
#define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */
#ifdef __cplusplus
}
#endif
#endif /* __STM32F1xx_HAL_CONF_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

67
source/Core/Inc/stm32f1xx_it.h Normal file
View File

@@ -0,0 +1,67 @@
/**
******************************************************************************
* @file stm32f1xx_it.h
* @brief This file contains the headers of the interrupt handlers.
******************************************************************************
*
* COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_IT_H
#define __STM32F1xx_IT_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
void NMI_Handler(void);
void HardFault_Handler(void);
void MemManage_Handler(void);
void BusFault_Handler(void);
void UsageFault_Handler(void);
void DebugMon_Handler(void);
void SysTick_Handler(void);
void DMA1_Channel1_IRQHandler(void);
void DMA1_Channel6_IRQHandler(void);
void DMA1_Channel7_IRQHandler(void);
void ADC1_2_IRQHandler(void);
void TIM1_UP_IRQHandler(void);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F1xx_IT_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/