./workspace/TS100 -> ./source/

2021-01-17 09:43:55 +11:00
parent ad37c752cc
commit 184b2c909f
325 changed files with 41 additions and 441 deletions
--- a/source/Core/Drivers/MMA8652FC.cpp
+++ b/source/Core/Drivers/MMA8652FC.cpp
@@ -0,0 +1,63 @@
+/*
+ * MMA8652FC.cpp
+ *
+ *  Created on: 31Aug.,2017
+ *      Author: Ben V. Brown
+ */
+
+#include <array>
+
+#include "MMA8652FC.hpp"
+#include "cmsis_os.h"
+
+
+static const FRToSI2C::I2C_REG i2c_registers[] = { { CTRL_REG2, 0, 0 },    //Normal mode
+		{ CTRL_REG2, 0x40, 2 },      // Reset all registers to POR values
+		{ FF_MT_CFG_REG, 0x78, 0 }, // Enable motion detection for X, Y, Z axis, latch disabled
+		{ PL_CFG_REG, 0x40, 0 },     //Enable the orientation detection
+		{ PL_COUNT_REG, 200, 0 },    //200 count debounce
+		{ PL_BF_ZCOMP_REG, 0b01000111, 0 }, //Set the threshold to 42 degrees
+		{ P_L_THS_REG, 0b10011100, 0 },    //Up the trip angles
+		{ CTRL_REG4, 0x01 | (1 << 4), 0 }, // Enable dataready interrupt & orientation interrupt
+		{ CTRL_REG5, 0x01, 0 }, // Route data ready interrupts to INT1 ->PB5 ->EXTI5, leaving orientation routed to INT2
+		{ CTRL_REG2, 0x12, 0 },   //Set maximum resolution oversampling
+		{ XYZ_DATA_CFG_REG, (1 << 4), 0 }, //select high pass filtered data
+		{ HP_FILTER_CUTOFF_REG, 0x03, 0 }, //select high pass filtered data
+		{ CTRL_REG1, 0x19, 0 } // ODR=12 Hz, Active mode
+};
+
+bool MMA8652FC::initalize() {
+	return FRToSI2C::writeRegistersBulk(MMA8652FC_I2C_ADDRESS, i2c_registers, sizeof(i2c_registers) / sizeof(i2c_registers[0]));
+
+}
+
+Orientation MMA8652FC::getOrientation() {
+	//First read the PL_STATUS register
+	uint8_t plStatus = FRToSI2C::I2C_RegisterRead(MMA8652FC_I2C_ADDRESS,
+	PL_STATUS_REG);
+	if ((plStatus & 0b10000000) == 0b10000000) {
+		plStatus >>= 1;    //We don't need the up/down bit
+		plStatus &= 0x03;    //mask to the two lower bits
+
+		//0 == left handed
+		//1 == right handed
+
+		return static_cast<Orientation>(plStatus);
+	}
+
+	return ORIENTATION_FLAT;
+}
+
+void MMA8652FC::getAxisReadings(int16_t &x, int16_t &y, int16_t &z) {
+	std::array<int16_t, 3> sensorData;
+
+	FRToSI2C::Mem_Read(MMA8652FC_I2C_ADDRESS, OUT_X_MSB_REG, reinterpret_cast<uint8_t*>(sensorData.begin()), sensorData.size() * sizeof(int16_t));
+
+	x = static_cast<int16_t>(__builtin_bswap16(*reinterpret_cast<uint16_t*>(&sensorData[0])));
+	y = static_cast<int16_t>(__builtin_bswap16(*reinterpret_cast<uint16_t*>(&sensorData[1])));
+	z = static_cast<int16_t>(__builtin_bswap16(*reinterpret_cast<uint16_t*>(&sensorData[2])));
+}
+
+bool MMA8652FC::detect() {
+	return FRToSI2C::probe(MMA8652FC_I2C_ADDRESS);
+}