./workspace/TS100 -> ./source/
This commit is contained in:
Ben V. Brown
528
source/Core/BSP/Pine64/I2C_Wrapper.cpp
Normal file
528
source/Core/BSP/Pine64/I2C_Wrapper.cpp
Normal file
@@ -0,0 +1,528 @@
|
||||
/*
|
||||
* FRToSI2C.cpp
|
||||
*
|
||||
* Created on: 14Apr.,2018
|
||||
* Author: Ralim
|
||||
*/
|
||||
#include "BSP.h"
|
||||
#include "IRQ.h"
|
||||
#include "Setup.h"
|
||||
#include <I2C_Wrapper.hpp>
|
||||
SemaphoreHandle_t FRToSI2C::I2CSemaphore = nullptr;
|
||||
StaticSemaphore_t FRToSI2C::xSemaphoreBuffer;
|
||||
#define I2C_TIME_OUT (uint16_t)(12000)
|
||||
void FRToSI2C::CpltCallback() {
|
||||
// TODO
|
||||
}
|
||||
|
||||
bool FRToSI2C::I2C_RegisterWrite(uint8_t address, uint8_t reg, uint8_t data) {
|
||||
return Mem_Write(address, reg, &data, 1);
|
||||
}
|
||||
|
||||
uint8_t FRToSI2C::I2C_RegisterRead(uint8_t add, uint8_t reg) {
|
||||
uint8_t temp = 0;
|
||||
Mem_Read(add, reg, &temp, 1);
|
||||
return temp;
|
||||
}
|
||||
|
||||
bool FRToSI2C::Mem_Read(uint16_t DevAddress, uint16_t read_address, uint8_t *p_buffer, uint16_t number_of_byte) {
|
||||
if (!lock())
|
||||
return false;
|
||||
i2c_interrupt_disable(I2C0, I2C_INT_ERR);
|
||||
i2c_interrupt_disable(I2C0, I2C_INT_BUF);
|
||||
i2c_interrupt_disable(I2C0, I2C_INT_EV);
|
||||
dma_parameter_struct dma_init_struct;
|
||||
|
||||
uint8_t state = I2C_START;
|
||||
uint8_t in_rx_cycle = 0;
|
||||
uint16_t timeout = 0;
|
||||
uint8_t tries = 0;
|
||||
uint8_t i2c_timeout_flag = 0;
|
||||
while (!(i2c_timeout_flag)) {
|
||||
switch (state) {
|
||||
case I2C_START:
|
||||
tries++;
|
||||
if (tries > 64) {
|
||||
i2c_stop_on_bus(I2C0);
|
||||
/* i2c master sends STOP signal successfully */
|
||||
while ((I2C_CTL0(I2C0) & 0x0200) && (timeout < I2C_TIME_OUT )) {
|
||||
timeout++;
|
||||
}
|
||||
unlock();
|
||||
return false;
|
||||
}
|
||||
if (0 == in_rx_cycle) {
|
||||
/* disable I2C0 */
|
||||
i2c_disable(I2C0);
|
||||
/* enable I2C0 */
|
||||
i2c_enable(I2C0);
|
||||
|
||||
/* enable acknowledge */
|
||||
i2c_ack_config(I2C0, I2C_ACK_ENABLE);
|
||||
/* i2c master sends start signal only when the bus is idle */
|
||||
while (i2c_flag_get(I2C0, I2C_FLAG_I2CBSY) && (timeout < I2C_TIME_OUT )) {
|
||||
timeout++;
|
||||
}
|
||||
if (timeout < I2C_TIME_OUT) {
|
||||
/* send the start signal */
|
||||
i2c_start_on_bus(I2C0);
|
||||
timeout = 0;
|
||||
state = I2C_SEND_ADDRESS;
|
||||
} else {
|
||||
I2C_Unstick();
|
||||
timeout = 0;
|
||||
state = I2C_START;
|
||||
}
|
||||
} else {
|
||||
i2c_start_on_bus(I2C0);
|
||||
timeout = 0;
|
||||
state = I2C_SEND_ADDRESS;
|
||||
}
|
||||
break;
|
||||
case I2C_SEND_ADDRESS:
|
||||
/* i2c master sends START signal successfully */
|
||||
while ((!i2c_flag_get(I2C0, I2C_FLAG_SBSEND)) && (timeout < I2C_TIME_OUT )) {
|
||||
timeout++;
|
||||
}
|
||||
if (timeout < I2C_TIME_OUT) {
|
||||
if (RESET == in_rx_cycle) {
|
||||
i2c_master_addressing(I2C0, DevAddress, I2C_TRANSMITTER);
|
||||
state = I2C_CLEAR_ADDRESS_FLAG;
|
||||
} else {
|
||||
i2c_master_addressing(I2C0, DevAddress, I2C_RECEIVER);
|
||||
state = I2C_CLEAR_ADDRESS_FLAG;
|
||||
}
|
||||
timeout = 0;
|
||||
} else {
|
||||
timeout = 0;
|
||||
state = I2C_START;
|
||||
in_rx_cycle = 0;
|
||||
}
|
||||
break;
|
||||
case I2C_CLEAR_ADDRESS_FLAG:
|
||||
/* address flag set means i2c slave sends ACK */
|
||||
while ((!i2c_flag_get(I2C0, I2C_FLAG_ADDSEND)) && (timeout < I2C_TIME_OUT )) {
|
||||
timeout++;
|
||||
if (i2c_flag_get(I2C0, I2C_FLAG_AERR)) {
|
||||
i2c_flag_clear(I2C0, I2C_FLAG_AERR);
|
||||
i2c_stop_on_bus(I2C0);
|
||||
/* i2c master sends STOP signal successfully */
|
||||
while ((I2C_CTL0(I2C0) & 0x0200) && (timeout < I2C_TIME_OUT )) {
|
||||
timeout++;
|
||||
}
|
||||
// Address NACK'd
|
||||
unlock();
|
||||
return false;
|
||||
}
|
||||
}
|
||||
if (timeout < I2C_TIME_OUT) {
|
||||
i2c_flag_clear(I2C0, I2C_FLAG_ADDSEND);
|
||||
timeout = 0;
|
||||
state = I2C_TRANSMIT_DATA;
|
||||
} else {
|
||||
i2c_stop_on_bus(I2C0);
|
||||
/* i2c master sends STOP signal successfully */
|
||||
while ((I2C_CTL0(I2C0) & 0x0200) && (timeout < I2C_TIME_OUT )) {
|
||||
timeout++;
|
||||
}
|
||||
// Address NACK'd
|
||||
unlock();
|
||||
return false;
|
||||
}
|
||||
break;
|
||||
case I2C_TRANSMIT_DATA:
|
||||
if (0 == in_rx_cycle) {
|
||||
/* wait until the transmit data buffer is empty */
|
||||
while ((!i2c_flag_get(I2C0, I2C_FLAG_TBE)) && (timeout < I2C_TIME_OUT )) {
|
||||
timeout++;
|
||||
}
|
||||
if (timeout < I2C_TIME_OUT) {
|
||||
// Write out the 8 byte address
|
||||
i2c_data_transmit(I2C0, read_address);
|
||||
timeout = 0;
|
||||
} else {
|
||||
timeout = 0;
|
||||
state = I2C_START;
|
||||
in_rx_cycle = 0;
|
||||
}
|
||||
/* wait until BTC bit is set */
|
||||
while ((!i2c_flag_get(I2C0, I2C_FLAG_BTC)) && (timeout < I2C_TIME_OUT )) {
|
||||
timeout++;
|
||||
}
|
||||
if (timeout < I2C_TIME_OUT) {
|
||||
timeout = 0;
|
||||
state = I2C_START;
|
||||
in_rx_cycle = 1;
|
||||
} else {
|
||||
timeout = 0;
|
||||
state = I2C_START;
|
||||
in_rx_cycle = 0;
|
||||
}
|
||||
} else {
|
||||
/* one byte master reception procedure (polling) */
|
||||
if (number_of_byte < 2) {
|
||||
/* disable acknowledge */
|
||||
i2c_ack_config(I2C0, I2C_ACK_DISABLE);
|
||||
/* clear ADDSEND register by reading I2C_STAT0 then I2C_STAT1 register
|
||||
* (I2C_STAT0 has already been read) */
|
||||
i2c_flag_get(I2C0, I2C_FLAG_ADDSEND);
|
||||
/* send a stop condition to I2C bus*/
|
||||
i2c_stop_on_bus(I2C0);
|
||||
/* wait for the byte to be received */
|
||||
while (!i2c_flag_get(I2C0, I2C_FLAG_RBNE))
|
||||
;
|
||||
/* read the byte received from the EEPROM */
|
||||
*p_buffer = i2c_data_receive(I2C0);
|
||||
/* decrement the read bytes counter */
|
||||
number_of_byte--;
|
||||
timeout = 0;
|
||||
} else { /* more than one byte master reception procedure (DMA) */
|
||||
dma_deinit(DMA0, DMA_CH6);
|
||||
dma_init_struct.direction = DMA_PERIPHERAL_TO_MEMORY;
|
||||
dma_init_struct.memory_addr = (uint32_t) p_buffer;
|
||||
dma_init_struct.memory_inc = DMA_MEMORY_INCREASE_ENABLE;
|
||||
dma_init_struct.memory_width = DMA_MEMORY_WIDTH_8BIT;
|
||||
dma_init_struct.number = number_of_byte;
|
||||
dma_init_struct.periph_addr = (uint32_t) &I2C_DATA(I2C0);
|
||||
dma_init_struct.periph_inc = DMA_PERIPH_INCREASE_DISABLE;
|
||||
dma_init_struct.periph_width = DMA_PERIPHERAL_WIDTH_8BIT;
|
||||
dma_init_struct.priority = DMA_PRIORITY_ULTRA_HIGH;
|
||||
dma_init(DMA0, DMA_CH6, &dma_init_struct);
|
||||
|
||||
i2c_dma_last_transfer_config(I2C0, I2C_DMALST_ON);
|
||||
/* enable I2C0 DMA */
|
||||
i2c_dma_enable(I2C0, I2C_DMA_ON);
|
||||
/* enable DMA0 channel5 */
|
||||
dma_channel_enable(DMA0, DMA_CH6);
|
||||
/* wait until BTC bit is set */
|
||||
while (!dma_flag_get(DMA0, DMA_CH6, DMA_FLAG_FTF)) {
|
||||
|
||||
}
|
||||
/* send a stop condition to I2C bus*/
|
||||
i2c_stop_on_bus(I2C0);
|
||||
}
|
||||
timeout = 0;
|
||||
state = I2C_STOP;
|
||||
}
|
||||
break;
|
||||
case I2C_STOP:
|
||||
/* i2c master sends STOP signal successfully */
|
||||
while ((I2C_CTL0(I2C0) & 0x0200) && (timeout < I2C_TIME_OUT )) {
|
||||
timeout++;
|
||||
}
|
||||
if (timeout < I2C_TIME_OUT) {
|
||||
timeout = 0;
|
||||
state = I2C_END;
|
||||
i2c_timeout_flag = I2C_OK;
|
||||
} else {
|
||||
timeout = 0;
|
||||
state = I2C_START;
|
||||
in_rx_cycle = 0;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
state = I2C_START;
|
||||
in_rx_cycle = 0;
|
||||
i2c_timeout_flag = I2C_OK;
|
||||
timeout = 0;
|
||||
break;
|
||||
}
|
||||
}
|
||||
unlock();
|
||||
return true;
|
||||
}
|
||||
|
||||
bool FRToSI2C::Mem_Write(uint16_t DevAddress, uint16_t MemAddress, uint8_t *p_buffer, uint16_t number_of_byte) {
|
||||
if (!lock())
|
||||
return false;
|
||||
|
||||
i2c_interrupt_disable(I2C0, I2C_INT_ERR);
|
||||
i2c_interrupt_disable(I2C0, I2C_INT_EV);
|
||||
i2c_interrupt_disable(I2C0, I2C_INT_BUF);
|
||||
dma_parameter_struct dma_init_struct;
|
||||
|
||||
uint8_t state = I2C_START;
|
||||
uint16_t timeout = 0;
|
||||
bool done = false;
|
||||
bool timedout = false;
|
||||
while (!(done || timedout)) {
|
||||
switch (state) {
|
||||
case I2C_START:
|
||||
/* i2c master sends start signal only when the bus is idle */
|
||||
while (i2c_flag_get(I2C0, I2C_FLAG_I2CBSY) && (timeout < I2C_TIME_OUT )) {
|
||||
timeout++;
|
||||
}
|
||||
if (timeout < I2C_TIME_OUT) {
|
||||
i2c_start_on_bus(I2C0);
|
||||
timeout = 0;
|
||||
state = I2C_SEND_ADDRESS;
|
||||
} else {
|
||||
I2C_Unstick();
|
||||
timeout = 0;
|
||||
state = I2C_START;
|
||||
}
|
||||
break;
|
||||
case I2C_SEND_ADDRESS:
|
||||
/* i2c master sends START signal successfully */
|
||||
while ((!i2c_flag_get(I2C0, I2C_FLAG_SBSEND)) && (timeout < I2C_TIME_OUT )) {
|
||||
timeout++;
|
||||
}
|
||||
if (timeout < I2C_TIME_OUT) {
|
||||
i2c_master_addressing(I2C0, DevAddress, I2C_TRANSMITTER);
|
||||
timeout = 0;
|
||||
state = I2C_CLEAR_ADDRESS_FLAG;
|
||||
} else {
|
||||
timedout = true;
|
||||
done = true;
|
||||
timeout = 0;
|
||||
state = I2C_START;
|
||||
}
|
||||
break;
|
||||
case I2C_CLEAR_ADDRESS_FLAG:
|
||||
/* address flag set means i2c slave sends ACK */
|
||||
while ((!i2c_flag_get(I2C0, I2C_FLAG_ADDSEND)) && (timeout < I2C_TIME_OUT )) {
|
||||
timeout++;
|
||||
if (i2c_flag_get(I2C0, I2C_FLAG_AERR)) {
|
||||
i2c_flag_clear(I2C0, I2C_FLAG_AERR);
|
||||
i2c_stop_on_bus(I2C0);
|
||||
/* i2c master sends STOP signal successfully */
|
||||
while ((I2C_CTL0(I2C0) & 0x0200) && (timeout < I2C_TIME_OUT )) {
|
||||
timeout++;
|
||||
}
|
||||
// Address NACK'd
|
||||
unlock();
|
||||
return false;
|
||||
}
|
||||
}
|
||||
timeout = 0;
|
||||
if (timeout < I2C_TIME_OUT) {
|
||||
i2c_flag_clear(I2C0, I2C_FLAG_ADDSEND);
|
||||
state = I2C_TRANSMIT_DATA;
|
||||
} else {
|
||||
// Dont retry as this means a NAK
|
||||
i2c_stop_on_bus(I2C0);
|
||||
/* i2c master sends STOP signal successfully */
|
||||
while ((I2C_CTL0(I2C0) & 0x0200) && (timeout < I2C_TIME_OUT )) {
|
||||
timeout++;
|
||||
}
|
||||
unlock();
|
||||
return false;
|
||||
}
|
||||
break;
|
||||
case I2C_TRANSMIT_DATA:
|
||||
/* wait until the transmit data buffer is empty */
|
||||
while ((!i2c_flag_get(I2C0, I2C_FLAG_TBE)) && (timeout < I2C_TIME_OUT )) {
|
||||
timeout++;
|
||||
}
|
||||
if (timeout < I2C_TIME_OUT) {
|
||||
/* send the EEPROM's internal address to write to : only one byte
|
||||
* address */
|
||||
i2c_data_transmit(I2C0, MemAddress);
|
||||
timeout = 0;
|
||||
} else {
|
||||
timedout = true;
|
||||
timeout = 0;
|
||||
state = I2C_START;
|
||||
}
|
||||
/* wait until BTC bit is set */
|
||||
while (!i2c_flag_get(I2C0, I2C_FLAG_BTC))
|
||||
;
|
||||
dma_deinit(DMA0, DMA_CH5);
|
||||
dma_init_struct.direction = DMA_MEMORY_TO_PERIPHERAL;
|
||||
dma_init_struct.memory_addr = (uint32_t) p_buffer;
|
||||
dma_init_struct.memory_inc = DMA_MEMORY_INCREASE_ENABLE;
|
||||
dma_init_struct.memory_width = DMA_MEMORY_WIDTH_8BIT;
|
||||
dma_init_struct.number = number_of_byte;
|
||||
dma_init_struct.periph_addr = (uint32_t) &I2C_DATA(I2C0);
|
||||
dma_init_struct.periph_inc = DMA_PERIPH_INCREASE_DISABLE;
|
||||
dma_init_struct.periph_width = DMA_PERIPHERAL_WIDTH_8BIT;
|
||||
dma_init_struct.priority = DMA_PRIORITY_ULTRA_HIGH;
|
||||
dma_init(DMA0, DMA_CH5, &dma_init_struct);
|
||||
/* enable I2C0 DMA */
|
||||
i2c_dma_enable(I2C0, I2C_DMA_ON);
|
||||
/* enable DMA0 channel5 */
|
||||
dma_channel_enable(DMA0, DMA_CH5);
|
||||
/* wait until BTC bit is set */
|
||||
while (!dma_flag_get(DMA0, DMA_CH5, DMA_FLAG_FTF)) {
|
||||
|
||||
}
|
||||
/* wait until BTC bit is set */
|
||||
while (!i2c_flag_get(I2C0, I2C_FLAG_BTC)) {
|
||||
}
|
||||
state = I2C_STOP;
|
||||
break;
|
||||
case I2C_STOP:
|
||||
/* send a stop condition to I2C bus */
|
||||
i2c_stop_on_bus(I2C0);
|
||||
/* i2c master sends STOP signal successfully */
|
||||
while ((I2C_CTL0(I2C0) & 0x0200) && (timeout < I2C_TIME_OUT )) {
|
||||
timeout++;
|
||||
}
|
||||
if (timeout < I2C_TIME_OUT) {
|
||||
timeout = 0;
|
||||
state = I2C_END;
|
||||
done = true;
|
||||
} else {
|
||||
timedout = true;
|
||||
done = true;
|
||||
timeout = 0;
|
||||
state = I2C_START;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
state = I2C_START;
|
||||
timeout = 0;
|
||||
break;
|
||||
}
|
||||
}
|
||||
unlock();
|
||||
return timedout == false;
|
||||
}
|
||||
|
||||
bool FRToSI2C::Transmit(uint16_t DevAddress, uint8_t *pData, uint16_t Size) {
|
||||
return Mem_Write(DevAddress, pData[0], pData + 1, Size - 1);
|
||||
}
|
||||
|
||||
bool FRToSI2C::probe(uint16_t DevAddress) {
|
||||
uint8_t temp[1];
|
||||
return Mem_Read(DevAddress, 0x00, temp, sizeof(temp));
|
||||
}
|
||||
|
||||
void FRToSI2C::I2C_Unstick() {
|
||||
unstick_I2C();
|
||||
}
|
||||
|
||||
bool FRToSI2C::lock() {
|
||||
if (I2CSemaphore == nullptr) {
|
||||
return false;
|
||||
}
|
||||
if (xTaskGetSchedulerState() != taskSCHEDULER_RUNNING) {
|
||||
return true;
|
||||
}
|
||||
return xSemaphoreTake(I2CSemaphore, TICKS_SECOND) == pdTRUE;
|
||||
}
|
||||
|
||||
void FRToSI2C::unlock() {
|
||||
if (xTaskGetSchedulerState() != taskSCHEDULER_RUNNING) {
|
||||
return;
|
||||
}
|
||||
xSemaphoreGive(I2CSemaphore);
|
||||
}
|
||||
|
||||
bool FRToSI2C::writeRegistersBulk(const uint8_t address, const I2C_REG *registers, const uint8_t registersLength) {
|
||||
for (int index = 0; index < registersLength; index++) {
|
||||
if (!I2C_RegisterWrite(address, registers[index].reg, registers[index].val)) {
|
||||
return false;
|
||||
}
|
||||
if (registers[index].pause_ms) {
|
||||
delay_ms(registers[index].pause_ms);
|
||||
}
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
bool FRToSI2C::wakePart(uint16_t DevAddress) {
|
||||
// wakepart is a special case where only the device address is sent
|
||||
if (!lock())
|
||||
return false;
|
||||
|
||||
i2c_interrupt_disable(I2C0, I2C_INT_ERR);
|
||||
i2c_interrupt_disable(I2C0, I2C_INT_EV);
|
||||
i2c_interrupt_disable(I2C0, I2C_INT_BUF);
|
||||
|
||||
uint8_t state = I2C_START;
|
||||
uint16_t timeout = 0;
|
||||
bool done = false;
|
||||
bool timedout = false;
|
||||
while (!(done || timedout)) {
|
||||
switch (state) {
|
||||
case I2C_START:
|
||||
/* i2c master sends start signal only when the bus is idle */
|
||||
while (i2c_flag_get(I2C0, I2C_FLAG_I2CBSY) && (timeout < I2C_TIME_OUT )) {
|
||||
timeout++;
|
||||
}
|
||||
if (timeout < I2C_TIME_OUT) {
|
||||
i2c_start_on_bus(I2C0);
|
||||
timeout = 0;
|
||||
state = I2C_SEND_ADDRESS;
|
||||
} else {
|
||||
I2C_Unstick();
|
||||
timeout = 0;
|
||||
state = I2C_START;
|
||||
}
|
||||
break;
|
||||
case I2C_SEND_ADDRESS:
|
||||
/* i2c master sends START signal successfully */
|
||||
while ((!i2c_flag_get(I2C0, I2C_FLAG_SBSEND)) && (timeout < I2C_TIME_OUT )) {
|
||||
timeout++;
|
||||
}
|
||||
if (timeout < I2C_TIME_OUT) {
|
||||
i2c_master_addressing(I2C0, DevAddress, I2C_TRANSMITTER);
|
||||
timeout = 0;
|
||||
state = I2C_CLEAR_ADDRESS_FLAG;
|
||||
} else {
|
||||
timedout = true;
|
||||
done = true;
|
||||
timeout = 0;
|
||||
state = I2C_START;
|
||||
}
|
||||
break;
|
||||
case I2C_CLEAR_ADDRESS_FLAG:
|
||||
/* address flag set means i2c slave sends ACK */
|
||||
while ((!i2c_flag_get(I2C0, I2C_FLAG_ADDSEND)) && (timeout < I2C_TIME_OUT )) {
|
||||
timeout++;
|
||||
if (i2c_flag_get(I2C0, I2C_FLAG_AERR)) {
|
||||
i2c_flag_clear(I2C0, I2C_FLAG_AERR);
|
||||
i2c_stop_on_bus(I2C0);
|
||||
/* i2c master sends STOP signal successfully */
|
||||
while ((I2C_CTL0(I2C0) & 0x0200) && (timeout < I2C_TIME_OUT )) {
|
||||
timeout++;
|
||||
}
|
||||
// Address NACK'd
|
||||
unlock();
|
||||
return false;
|
||||
}
|
||||
}
|
||||
if (timeout < I2C_TIME_OUT) {
|
||||
i2c_flag_clear(I2C0, I2C_FLAG_ADDSEND);
|
||||
timeout = 0;
|
||||
state = I2C_STOP;
|
||||
} else {
|
||||
// Dont retry as this means a NAK
|
||||
i2c_stop_on_bus(I2C0);
|
||||
/* i2c master sends STOP signal successfully */
|
||||
while ((I2C_CTL0(I2C0) & 0x0200) && (timeout < I2C_TIME_OUT )) {
|
||||
timeout++;
|
||||
}
|
||||
unlock();
|
||||
return false;
|
||||
}
|
||||
break;
|
||||
|
||||
case I2C_STOP:
|
||||
/* send a stop condition to I2C bus */
|
||||
i2c_stop_on_bus(I2C0);
|
||||
/* i2c master sends STOP signal successfully */
|
||||
while ((I2C_CTL0(I2C0) & 0x0200) && (timeout < I2C_TIME_OUT )) {
|
||||
timeout++;
|
||||
}
|
||||
if (timeout < I2C_TIME_OUT) {
|
||||
timeout = 0;
|
||||
state = I2C_END;
|
||||
done = true;
|
||||
} else {
|
||||
timedout = true;
|
||||
done = true;
|
||||
timeout = 0;
|
||||
state = I2C_START;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
state = I2C_START;
|
||||
timeout = 0;
|
||||
break;
|
||||
}
|
||||
}
|
||||
unlock();
|
||||
return timedout == false;
|
||||
}
|
||||
Reference in New Issue
Block a user