./workspace/TS100 -> ./source/

source/Core/BSP/BSP.h

@@ -0,0 +1,77 @@
+#include <stdint.h>
+#include <stdbool.h>
+#include "BSP_Flash.h"
+#include "BSP_Power.h"
+#include "BSP_QC.h"
+#include "Defines.h"
+#include "Model_Config.h"
+/*
+ * BSP.h -- Board Support
+ *
+ * This exposes functions that are expected to be implemented to add support for different hardware
+ */
+
+#ifndef BSP_BSP_H_
+#define BSP_BSP_H_
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// maximum htim2 PWM value
+extern const uint16_t powerPWM;
+// htim2.Init.Period, the full PWM cycle
+extern uint16_t totalPWM;
+
+// Called first thing in main() to init the hardware
+void preRToSInit();
+// Called once the RToS has started for any extra work
+void postRToSInit();
+
+// Called once from preRToSInit()
+void BSPInit(void);
+
+// Called to reset the hardware watchdog unit
+void resetWatchdog();
+// Accepts a output level of 0.. to use to control the tip output PWM
+void setTipPWM(uint8_t pulse);
+// Returns the Handle temp in C, X10
+uint16_t getHandleTemperature();
+// Returns the Tip temperature ADC reading in raw units
+uint16_t getTipRawTemp(uint8_t refresh);
+// Returns the main DC input voltage, using the adjustable divisor + sample flag
+uint16_t getInputVoltageX10(uint16_t divisor, uint8_t sample);
+// Switch to the most suitable PWM freq given the desired period;
+// returns true if the switch was performed and totalPWM changed
+bool tryBetterPWM(uint8_t pwm);
+
+// Readers for the two buttons
+// !! Returns 1 if held down, 0 if released
+uint8_t getButtonA();
+uint8_t getButtonB();
+
+// This is a work around that will be called if I2C starts to bug out
+// This should toggle the SCL line until SDA goes high to end the current transaction
+void unstick_I2C();
+
+// Reboot the IC when things go seriously wrong
+void reboot();
+
+// If the user has programmed in a bootup logo, draw it to the screen from flash
+// Returns 1 if the logo was printed so that the unit waits for the timeout or button
+uint8_t showBootLogoIfavailable();
+//delay wrapper for delay using the hardware timer (used before RTOS)
+void delay_ms(uint16_t count) ;
+//Used to allow knowledge of if usb_pd is being used
+uint8_t usb_pd_detect();
+bool getHallSensorFitted();
+// If the iron has a hall effect sensor in the handle, return an signed count of the reading
+// If the sensor is single polarity (or polarity insensitive) just return 0..32768
+int16_t getRawHallEffect();
+
+//Returns true if power is from dumb "DC" input rather than "smart" QC or PD
+bool getIsPoweredByDCIN();
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* BSP_BSP_H_ */