sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity

Fix Menu not handling some languages

Browse Source 
Should close #125
This commit is contained in:
Ben V. Brown
2017-12-12 11:31:22 +11:00
parent b0e20b9e2f
commit 17e7d92463
3 changed files with 127 additions and 126 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
workspace/TS100/inc/Translation.h
View File

@@ -23,12 +23,12 @@ extern const char SettingRightChar;
extern const char SettingLeftChar;
extern const char SettingAutoChar;
#define LANG_EN
//#define LANG_EN
//#define LANG_RU
//#define LANG_ES
//#define LANG_SE
//#define LANG_IT
//#define LANG_FR
#define LANG_FR
//#define LANG_DE
//#define LANG_CS_CZ

246
workspace/TS100/src/Translation.c
View File

@@ -7,28 +7,30 @@
#include "Translation.h"
#ifdef LANG_EN
const char* SettingsLongNames[16] = {
/*These are all the help text for all the settings.*/
/*No requirements on spacing or length*/
"Power source. Sets cutoff voltage. <DC 10V> <S 3.3V per cell>", //Power Source
"Sleep Temperature <C>", //Sleep Temp
"Sleep Timeout <Minutes/Seconds>", //Sleep Timeout
"Shutdown Timeout <Minutes>", //Shutdown Time
"Motion Sensitivity <0.Off 1.least sensitive 9.most sensitive>", //Motion Sensitivity
"Temperature Unit <C=Celsius F=Fahrenheit>", //Temp Unit
"Display detailed information in a smaller font on the idle screen.", //Detailed Information
"Display Orientation <A. Automatic L. Left Handed R. Right Handed>", //Orientation
"Enable front key enters boost mode 450C mode when soldering", //Boost enable
"Temperature when in \"boost\" mode", //Boost Temp
"Automatically starts the iron into soldering on power up. T=Soldering, S= Sleep mode,F=Off", //Auto start
"Blink the temperature on the cooling screen while the tip is still hot.", //Cooling Blink
"Calibrate tip offset.", //Calibrate Tip
"Reset all settings", //Reset Settings
"VIN Calibration. Buttons adjust, long press to exit", //VIN Cal
"Display detailed information while soldering", //ADV SLD
const char* SettingsLongNames[16] =
{
/*These are all the help text for all the settings.*/
/*No requirements on spacing or length*/
"Power source. Sets cutoff voltage. <DC 10V> <S 3.3V per cell>", //Power Source
"Sleep Temperature <C>", //Sleep Temp
"Sleep Timeout <Minutes/Seconds>", //Sleep Timeout
"Shutdown Timeout <Minutes>", //Shutdown Time
"Motion Sensitivity <0.Off 1.least sensitive 9.most sensitive>", //Motion Sensitivity
"Temperature Unit <C=Celsius F=Fahrenheit>", //Temp Unit
"Display detailed information in a smaller font on the idle screen.", //Detailed Information
"Display Orientation <A. Automatic L. Left Handed R. Right Handed>", //Orientation
"Enable front key enters boost mode 450C mode when soldering", //Boost enable
"Temperature when in \"boost\" mode", //Boost Temp
"Automatically starts the iron into soldering on power up. T=Soldering, S= Sleep mode,F=Off", //Auto start
"Blink the temperature on the cooling screen while the tip is still hot.", //Cooling Blink
"Calibrate tip offset.", //Calibrate Tip
"Reset all settings", //Reset Settings
"VIN Calibration. Buttons adjust, long press to exit", //VIN Cal
"Display detailed information while soldering", //ADV SLD
};
const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
const char* SettingsCalibrationWarning =
"Please ensure the tip is at room temperature before continuing!";
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
const char* SleepingSimpleString = "Zzzz"; // Must be <= 4 chars
const char* SleepingAdvancedString = "Sleeping..."; // <=17 chars
@@ -45,7 +47,7 @@ const char SettingAutoChar = 'A';
const char* SettingsLongNames[16] = {
/*These are all the help text for all the settings.*/
/*No requirements on spacing or length*/
"Источник питания. Установка напряжения отключения. <DC 10V> <S 3.3 V на батарею>", //Cell count
"Источник питания. Установка напряжения отключения. <DC 10V> <S 3.3 V на батарею>", //Cell count
"Температура Сна <С>",//Sleep Temp
"Переход в режим Сна <Минуты>",//Sleep timeout
"Переходит в режим ожидания <Минуты>",//Shutdown timeout
@@ -103,19 +105,19 @@ const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
const char* SleepingAdvancedString = "Sleeping...";// <=17 chars
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
const char* WarningAdvancedString = "WARNING! TIP HOT!";
const char* WarningAdvancedString = "WARNING! TIP HOT!";
const char SettingTrueChar = 'V'; // True in Spanish is "Verdadero"
const char SettingFalseChar = 'F';
const char SettingRightChar = 'D'; // Right is "Derecha"
const char SettingLeftChar = 'I'; // Left is "Izquierda"
const char SettingTrueChar = 'V';// True in Spanish is "Verdadero"
const char SettingFalseChar = 'F';
const char SettingRightChar = 'D';// Right is "Derecha"
const char SettingLeftChar = 'I';// Left is "Izquierda"
const char SettingAutoChar = 'A';
#endif
#ifdef LANG_SE
const char* SettingsLongNames[16] = {
/*These are all the help text for all the settings.*/
/*No requirements on spacing or length*/
"Источник питания. Установка напряжения отключения. <DC 10V> <S 3.3 V на батарею>", //Cell count
"Источник питания. Установка напряжения отключения. <DC 10V> <S 3.3 V на батарею>", //Cell count
"Температура Сна <С>",//Sleep Temp
"Переход в режим Сна <Минуты>",//Sleep timeout
"Переходит в режим ожидания <Минуты>",//Shutdown timeout
@@ -162,7 +164,7 @@ const char* SettingsLongNames[16] = {
"Temperatura in modalità \"boost\"",
"Attiva automaticamente il saldatore quando viene alimentato <A: saldatura; S: standby; D: disattiva>",
"Durante il raffreddamento mostra la temperatura sul display se la punta è ancora calda"
"Calibra l'offset della punta",//Calibrate Tip
"Calibra l'offset della punta", //Calibrate Tip
"Ripristina tutte le impostazioni",//Reset Settings
"Calibra la tensione in entrata; regola con i bottoni, tieni permuto per uscire",//VIN Cal
"Mostra informazioni dettagliate mentre stai saldando",//ADV SLD
@@ -191,7 +193,7 @@ const char* SettingsLongNames[16] = {
"Temps avant extinction. <Minutes>",
"Sensibilitee du capteur de mouvement. <0=Inactif 1=Peu sensible 9=Tres sensible>",
"Unitee de temperature.",
"Afficher des informations detaillees en petit lors de la veille", //Detailed Information
"Afficher des informations detaillees en petit lors de la veille", //Detailed Information
"Orientation de l\'affichage. <A=Automatique G=Gaucher D=Droitier>",
"Active le mode \"Boost\" 450C sur le bouton de devant pendant la soudure.",
"Temperature du mode \"Boost\". <C>",
@@ -239,7 +241,7 @@ const char* SettingsLongNames[16] = {
};
const char* SettingsCalibrationWarning = "Vor dem Fortfahren muss die Lötspitze vollständig abgekühlt sein!";
const char* UVLOWarningString = "LOW VOLT";//Fixed width 8 chars
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
const char* SleepingSimpleString = "Zzz ";// Must be <= 4 chars
const char* SleepingAdvancedString = "Ruhemodus...";// <=17 chars
const char* WarningSimpleString = "HEIß";//Must be <= 4 chars
@@ -261,7 +263,7 @@ const char* SettingsLongNames[16] = {
"Cas na vypnutie <minuty>",
"Citlivost detekcie pohybu <0=Vyp, 1=Min ... 9=Max>",
"Jednotky merania teploty <C=stupne Celzia, F=stupne Fahrenheita>",
"Zobrazit detailne informacie v kludovom rezime <T=Zap, F=Vyp>", //Detailed Information
"Zobrazit detailne informacie v kludovom rezime <T=Zap, F=Vyp>", //Detailed Information
"Orientacia displeja <A=Auto, L=Lavak, R=Pravak>",
"Povolit tlacidlo pre prudky nahrev <T=Zap, F=Vyp>",
"Cielova teplota pre prudky nahrev (v nastavenych jednotkach)",
@@ -274,7 +276,7 @@ const char* SettingsLongNames[16] = {
};
const char* SettingsCalibrationWarning = "Najprv sa prosim uistite, ze hrot ma izbovu teplotu!";
const char* UVLOWarningString = "LOW VOLT";//Fixed width 8 chars
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
const char* SleepingSimpleString = "Chrr";// Must be <= 4 chars
const char* SleepingAdvancedString = "Kludovy rezim...";// <=17 chars
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
@@ -288,31 +290,31 @@ const char SettingAutoChar = 'A';
#endif
#ifdef LANG_TR
const char* SettingsLongNames[16] = {
/*These are all the help text for all the settings.*/
/*No requirements on spacing or length*/
"Güç Kaynağı. kesim geriliminı ayarlar. <DC 10V> <S 3.3V hücre başına>", //Power Source
"Uyku Sıcaklığı <C>", //Sleep Temp
"Uyku Zaman Aşımı <Dakika/Saniye>", //Sleep Timeout
"Kapatma Zaman Aşımı <Dakika>", //Shutdown Time
"Hareket Hassasiyeti <0.Kapalı 1.En az duyarlı 9.En duyarlı>", //Motion Sensitivity
"Sıcaklık Ünitesi <C=Celsius F=Fahrenheit>", //Temp Unit
"Boş ekranda ayrıntılı bilgileri daha küçük bir yazı tipi ile göster.", //Detailed Information
"Görüntü Yönlendirme <A. Otomatik L. Solak R. Sağlak>", //Orientation
"Lehimleme yaparken ön tuşa basmak Boost moduna sokar(450C)", //Boost enable
"\"boost\" Modu Derecesi", //Boost Temp
"Güç verildiğinde otomatik olarak lehimleme modunda başlat. T=Lehimleme Modu, S= Uyku Modu,F=Kapalı", //Auto start
"Soğutma ekranında uç hala sıcakken derece yanıp sönsün.", //Cooling Blink
"Ucu kalibre et.", //Calibrate Tip
"Bütün ayarları sıfırla", //Reset Settings
"VIN Kalibrasyonu. Düğmeler ayarlar, çıkmak için uzun bas.", //VIN Cal
"Lehimleme yaparken detaylı bilgi göster", //ADV SLD
};
/*These are all the help text for all the settings.*/
/*No requirements on spacing or length*/
"Güç Kaynağı. kesim geriliminı ayarlar. <DC 10V> <S 3.3V hücre başına>", //Power Source
"Uyku Sıcaklığı <C>",//Sleep Temp
"Uyku Zaman Aşımı <Dakika/Saniye>",//Sleep Timeout
"Kapatma Zaman Aşımı <Dakika>",//Shutdown Time
"Hareket Hassasiyeti <0.Kapalı 1.En az duyarlı 9.En duyarlı>",//Motion Sensitivity
"Sıcaklık Ünitesi <C=Celsius F=Fahrenheit>",//Temp Unit
"Boş ekranda ayrıntılı bilgileri daha küçük bir yazı tipi ile göster.",//Detailed Information
"Görüntü Yönlendirme <A. Otomatik L. Solak R. Sağlak>",//Orientation
"Lehimleme yaparken ön tuşa basmak Boost moduna sokar(450C)",//Boost enable
"\"boost\" Modu Derecesi",//Boost Temp
"Güç verildiğinde otomatik olarak lehimleme modunda başlat. T=Lehimleme Modu, S= Uyku Modu,F=Kapalı",//Auto start
"Soğutma ekranında uç hala sıcakken derece yanıp sönsün.",//Cooling Blink
"Ucu kalibre et.",//Calibrate Tip
"Bütün ayarları sıfırla",//Reset Settings
"VIN Kalibrasyonu. Düğmeler ayarlar, çıkmak için uzun bas.",//VIN Cal
"Lehimleme yaparken detaylı bilgi göster",//ADV SLD
};
const char* SettingsCalibrationWarning = "Lütfen devam etmeden önce ucun oda sıcaklığında olduğunu garantiye alın!";
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
const char* SleepingSimpleString = "Zzzz"; // Must be <= 4 chars
const char* SleepingAdvancedString = "Uyuyor..."; // <=17 chars
const char* WarningSimpleString = "HOT!"; //Must be <= 4 chars
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
const char* SleepingAdvancedString = "Uyuyor...";// <=17 chars
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
const char* WarningAdvancedString = "UYARI! UÇ SICAK!";
const char SettingTrueChar = 'T';
@@ -323,31 +325,31 @@ const char SettingAutoChar = 'A';
#endif
#ifdef LANG_HR
const char* SettingsLongNames[16] = {
/*These are all the help text for all the settings.*/
/*No requirements on spacing or length*/
"Izvor napajanja. Postavlja napon iskljucivanja. <DC 10V> <S 3.3V po celiji>", //Power Source
"Temperatura spavanja. <C>", //Sleep Temp
"Vrijeme spavanja. <Minute/Sekunde>", //Sleep Timeout
"Vrijeme gasenja. <Minutes>", //Shutdown Time
"Osjetljivost prepoznavanja pokreta. <0=Ugaseno, 1=Najmanje osjetljivo, 9=Najosjetljivije>", //Motion Sensitivity
"Jedinica temperature. <C=Celzij, F=Fahrenheit>", //Temp Unit
"Prikazivanje detaljnih informacija manjim fontom tijekom cekanja.", //Detailed Information
"Orijentacija ekrana. <A=Automatski, L=Ljevoruki, D=Desnoruki>", //Orientation
"Prednji gumb prilikom lemljenja aktivira pojacani (Boost) nacin.", //Boost enable
"Temperatura u pojacanom (Boost) nacinu.", //Boost Temp
"Nacin u kojemu se lemilica pokrece po ukljucivanju napajanja. <+=Lemljenje, S=Spavanje, -=Ugaseno>", //Auto start
"Bljeskanje temperature prilikom hladjenja, ako je lemilica vruca.", //Cooling Blink
"Kalibriranje temperature vrha.", //Calibrate Tip
"Vracanje svih postavki.", //Reset Settings
"Kalibracija ulaznog napona. Podesavanje gumbima, dugacki pritisak za kraj.", //VIN Cal
"Prikazivanje detaljnih informacija tijekom lemljenja.", //ADV SLD
};
/*These are all the help text for all the settings.*/
/*No requirements on spacing or length*/
"Izvor napajanja. Postavlja napon iskljucivanja. <DC 10V> <S 3.3V po celiji>", //Power Source
"Temperatura spavanja. <C>",//Sleep Temp
"Vrijeme spavanja. <Minute/Sekunde>",//Sleep Timeout
"Vrijeme gasenja. <Minutes>",//Shutdown Time
"Osjetljivost prepoznavanja pokreta. <0=Ugaseno, 1=Najmanje osjetljivo, 9=Najosjetljivije>",//Motion Sensitivity
"Jedinica temperature. <C=Celzij, F=Fahrenheit>",//Temp Unit
"Prikazivanje detaljnih informacija manjim fontom tijekom cekanja.",//Detailed Information
"Orijentacija ekrana. <A=Automatski, L=Ljevoruki, D=Desnoruki>",//Orientation
"Prednji gumb prilikom lemljenja aktivira pojacani (Boost) nacin.",//Boost enable
"Temperatura u pojacanom (Boost) nacinu.",//Boost Temp
"Nacin u kojemu se lemilica pokrece po ukljucivanju napajanja. <+=Lemljenje, S=Spavanje, -=Ugaseno>",//Auto start
"Bljeskanje temperature prilikom hladjenja, ako je lemilica vruca.",//Cooling Blink
"Kalibriranje temperature vrha.",//Calibrate Tip
"Vracanje svih postavki.",//Reset Settings
"Kalibracija ulaznog napona. Podesavanje gumbima, dugacki pritisak za kraj.",//VIN Cal
"Prikazivanje detaljnih informacija tijekom lemljenja.",//ADV SLD
};
const char* SettingsCalibrationWarning = "Provjerite da je vrh ohladjen na sobnu temperaturu prije nego sto nastavite!";
const char* UVLOWarningString = "NAPON!!!"; //Fixed width 8 chars
const char* SleepingSimpleString = "Zzzz"; // Must be <= 4 chars
const char* SleepingAdvancedString = "Spavanje..."; // <=17 chars
const char* WarningSimpleString = "VRUC"; //Must be <= 4 chars
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
const char* SleepingAdvancedString = "Spavanje...";// <=17 chars
const char* WarningSimpleString = "VRUC";//Must be <= 4 chars
const char* WarningAdvancedString = "OPREZ! Vrsak je vruc!";
const char SettingTrueChar = '+';
@@ -359,32 +361,32 @@ const char SettingAutoChar = 'A';
#ifdef LANG_CS_CZ
const char* SettingsLongNames[16] = {
/*These are all the help text for all the settings.*/
/*No requirements on spacing or length*/
"Zdroj napajeni. Pri nizsim napeti se odpoji <DC=10V, xS=x*3.3V pro LiPo,LiIon...>", //Power Source
"Teplota v rezimu spanku", //Sleep Temp
"Cas do rezimu spanku <Minut/Sekund>", //Sleep Timeout
"Cas do automatickeho vypnuti <Minut>", //Shutdown Time
"Citlivost detekce pohybu <0=Vyp, 1=Min, ... 9=Max>", //Motion Sensitivity
"Jednotky mereni teploty <C=Celsius, F=Fahrenheit>", //Temp Unit
"Zobrazit podrobnosti na vychozi obrazovce <Z=Zap, V=Vyp>", //Detailed Information
"Otoceni displaye <A=Auto, L=Levak, P=Pravak>", //Orientation
"Povolit boost drzenim leveho tlacitka pri pajeni <Z=Zap, V=Vyp>", //Boost enable
"Teplota pri boostu", //Boost Temp
"Pri startu ihned nahrivat hrot <Z=Zap, V=Vyp, S=Rezim spanku>", //Auto start
"Blikani teploty pri chladnuti, dokud je hrot horky <Z=Zap, V=Vyp>", //Cooling Blink
"Kalibrovat mereni teploty", //Calibrate Tip
"Obnovit tovarni nastaveni", //Reset Settings
"Kalibrovat vstupni napeti. Tlacitky upravte, podrzenim potvrdte.", //VIN Cal
"Zobrazit podrobnosti pri pajeni <Z=Zap, V=Vyp>", //ADV SLD
};
/*These are all the help text for all the settings.*/
/*No requirements on spacing or length*/
"Zdroj napajeni. Pri nizsim napeti se odpoji <DC=10V, xS=x*3.3V pro LiPo,LiIon...>", //Power Source
"Teplota v rezimu spanku",//Sleep Temp
"Cas do rezimu spanku <Minut/Sekund>",//Sleep Timeout
"Cas do automatickeho vypnuti <Minut>",//Shutdown Time
"Citlivost detekce pohybu <0=Vyp, 1=Min, ... 9=Max>",//Motion Sensitivity
"Jednotky mereni teploty <C=Celsius, F=Fahrenheit>",//Temp Unit
"Zobrazit podrobnosti na vychozi obrazovce <Z=Zap, V=Vyp>",//Detailed Information
"Otoceni displaye <A=Auto, L=Levak, P=Pravak>",//Orientation
"Povolit boost drzenim leveho tlacitka pri pajeni <Z=Zap, V=Vyp>",//Boost enable
"Teplota pri boostu",//Boost Temp
"Pri startu ihned nahrivat hrot <Z=Zap, V=Vyp, S=Rezim spanku>",//Auto start
"Blikani teploty pri chladnuti, dokud je hrot horky <Z=Zap, V=Vyp>",//Cooling Blink
"Kalibrovat mereni teploty",//Calibrate Tip
"Obnovit tovarni nastaveni",//Reset Settings
"Kalibrovat vstupni napeti. Tlacitky upravte, podrzenim potvrdte.",//VIN Cal
"Zobrazit podrobnosti pri pajeni <Z=Zap, V=Vyp>",//ADV SLD
};
const char* SettingsCalibrationWarning = "Ujistete se, ze hrot ma pokojovou teplotu! "; //ending space needed
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
const char* SleepingSimpleString = "Zzz "; // Must be <= 4 chars
const char* SleepingAdvancedString = "Rezim spanku..."; // <=17 chars
const char* WarningSimpleString = "HOT!"; //Must be <= 4 chars
const char* WarningAdvancedString = "!! HORKY HROT !!"; // <= 16 chars
const char* UVLOWarningString = "LOW VOLT";//Fixed width 8 chars
const char* SleepingSimpleString = "Zzz ";// Must be <= 4 chars
const char* SleepingAdvancedString = "Rezim spanku...";// <=17 chars
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
const char* WarningAdvancedString = "!! HORKY HROT !!";// <= 16 chars
const char SettingTrueChar = 'Z';
const char SettingFalseChar = 'V';
@@ -394,31 +396,31 @@ const char SettingAutoChar = 'A';
#endif
#ifdef LANG_HUN
const char* SettingsLongNames[16] = {
/*These are all the help text for all the settings.*/
/*No requirements on spacing or length*/
"Áramforrás. Beállítja a lekapcsolási feszültséget. <DC 10V> <S 3.3V cellánként>", //Power Source
"Alvási hőmérséklet <C>", //Sleep Temp
"Elalvási időzítő <Perc/Másodperc>", //Sleep Timeout
"Kikapcsolási időzítő <Minutes>", //Shutdown Time
"Mozgás érzékenység beállítása. <0.Ki 1.kevésbé érzékeny 9.legérzékenyebb>", //Motion Sensitivity
"Hőmérsékleti egység <C=Celsius F=Fahrenheit>", //Temp Unit
"Részletes információ megjelenítése kisebb betűméretben a készenléti képernyőn.", //Detailed Information
"Megjelenítési tájolás <A. Automatikus L. Balkezes R. Jobbkezes>", //Orientation
"Elülső gombbal lépjen boost módba, 450C forrasztás közben", //Boost enable
"Hőmérséklet \"boost\" módban", //Boost Temp
"Bekapcsolás után automatikusan lépjen forrasztás módba. T=Forrasztás, S=Alvó mód,F=Ki", //Auto start
"Villogjon a hőmérséklet hűlés közben, amíg a hegy forró.", //Cooling Blink
"Hegy hőmérsékletének kalibrálása", //Calibrate Tip
"Beállítások alaphelyzetbe állítása", //Reset Settings
"A bemeneti feszültség kalibrálása. Röviden megnyomva állítsa be, hosszan nyomja meg a kilépéshez.", //VIN Cal
"Részletes információk megjelenítése forrasztás közben", //ADV SLD
};
/*These are all the help text for all the settings.*/
/*No requirements on spacing or length*/
"Áramforrás. Beállítja a lekapcsolási feszültséget. <DC 10V> <S 3.3V cellánként>", //Power Source
"Alvási hőmérséklet <C>",//Sleep Temp
"Elalvási időzítő <Perc/Másodperc>",//Sleep Timeout
"Kikapcsolási időzítő <Minutes>",//Shutdown Time
"Mozgás érzékenység beállítása. <0.Ki 1.kevésbé érzékeny 9.legérzékenyebb>",//Motion Sensitivity
"Hőmérsékleti egység <C=Celsius F=Fahrenheit>",//Temp Unit
"Részletes információ megjelenítése kisebb betűméretben a készenléti képernyőn.",//Detailed Information
"Megjelenítési tájolás <A. Automatikus L. Balkezes R. Jobbkezes>",//Orientation
"Elülső gombbal lépjen boost módba, 450C forrasztás közben",//Boost enable
"Hőmérséklet \"boost\" módban",//Boost Temp
"Bekapcsolás után automatikusan lépjen forrasztás módba. T=Forrasztás, S=Alvó mód,F=Ki",//Auto start
"Villogjon a hőmérséklet hűlés közben, amíg a hegy forró.",//Cooling Blink
"Hegy hőmérsékletének kalibrálása",//Calibrate Tip
"Beállítások alaphelyzetbe állítása",//Reset Settings
"A bemeneti feszültség kalibrálása. Röviden megnyomva állítsa be, hosszan nyomja meg a kilépéshez.",//VIN Cal
"Részletes információk megjelenítése forrasztás közben",//ADV SLD
};
const char* SettingsCalibrationWarning = "Folytatás előtt győződj meg róla, hogy a hegy szobahőmérsékletű!";
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
const char* SleepingSimpleString = "Zzzz"; // Must be <= 4 chars
const char* SleepingAdvancedString = "Alvás..."; // <=17 chars
const char* WarningSimpleString = "HOT!"; //Must be <= 4 chars
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
const char* SleepingAdvancedString = "Alvás...";// <=17 chars
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
const char* WarningAdvancedString = "FIGYELEM! FORRÓ HEGY!";
const char SettingTrueChar = 'T';

3
workspace/TS100/src/main.cpp
View File

@@ -314,8 +314,7 @@ static void gui_settingsMenu() {
settingsResetRequest = false;
bool earlyExit = false;
uint32_t descriptionStart = 0;
while ((settingsMenu[currentScreen].description != NULL)
&& earlyExit == false) {
while ((settingsMenu[currentScreen].incrementHandler.func != NULL) && earlyExit == false) {
lcd.setFont(0);
lcd.clearScreen();
lcd.setCursor(0, 0);