sv/IronOS
1
0
Fork 0
forked from me/IronOS
Code Pull Requests Activity

Pinecilv2 adc v2 (#1916)

Browse Source 
* Updated NTC lookup

* remove float compute from adc (as we dont use it)

* Updated adc settings

* Updated ADC Init

* Custom max temp lookup

* Mask Timer around changing timer rate

* Use timer channels in sane order

* Update IRQ.cpp

* Remove ADC dummy wait on start/stop

* Dont use ADC IRQ

* Disable sampling delay

* Update Setup.cpp

* PinecilV2 disable ROM driver utils

Always use our source

* Force settings upgrade on PinecilV2

Fix forced settings upgrade on Pinecilv2

* Prevent ADC rollover

* Update Setup.cpp

* ADC cleanup

* Rollover prevention

* Measure tip temperature 2nd

* Rebase Buffalo SDK to 1.4.5 (#1923)

* Update bl702_adc.c

* Update board.c

* .

* Update bl702_adc.c

* Import updated hal_drv

* Remove accidental dupe of stack in linker

* First pass update BLE stack

* Update ReleaseNotes

* Update push.yml

* Drop BT Audio which we dont use

* .

* Reformat

* Update conn.c

* Update hog.c
This commit is contained in:
Ben V. Brown
2024-06-08 14:33:06 +10:00
committed by GitHub
parent 442dbd982e
commit 14b92cde08
121 changed files with 1989 additions and 11372 deletions
Download Patch File Download Diff File Expand all files Collapse all files

11
source/Core/BSP/Pinecilv2/configuration.h
View File

@@ -83,7 +83,7 @@
#define POWER_PULSE_WAIT_MAX 9 // 9*2.5s = 22.5 seconds
#define POWER_PULSE_DURATION_MAX 9 // 9*250ms = 2.25 seconds
#ifdef MODEL_Pinecil
#ifdef MODEL_Pinecilv2
#define POWER_PULSE_DEFAULT 0
#else
#define POWER_PULSE_DEFAULT 5
@@ -114,7 +114,7 @@
#define ANIMATION_LOOP 1 // 0: off 1: on
#define ANIMATION_SPEED settingOffSpeed_t::MEDIUM
#define OP_AMP_Rf_Pinecil 680 * 1000 // 700 Kilo-ohms -> From schematic, R1
#define OP_AMP_Rf_Pinecil 680 * 1000 // 680 Kilo-ohms -> From schematic, R1
#define OP_AMP_Rin_Pinecil 2370 // 2.37 Kilo-ohms -> From schematic, R2
#define OP_AMP_GAIN_STAGE_PINECIL (1 + (OP_AMP_Rf_Pinecil / OP_AMP_Rin_Pinecil))
@@ -124,10 +124,10 @@
#endif
#ifdef MODEL_Pinecilv2
#define ADC_VDD_MV 3300 // ADC max reading millivolts
#define ADC_MAX_READING (62000 >> 1) // Maximum reading of the adc
#define ADC_VDD_MV 3200 // ADC max reading millivolts
#define ADC_MAX_READING ((1 << 16) >> 1) // Maximum reading of the adc
#define SOLDERING_TEMP 320 // Default soldering temp is 320.0 °C
#define VOLTAGE_DIV 600 // 600 - Default divider from schematic
#define VOLTAGE_DIV 630 // 600 - Default divider from schematic
#define CALIBRATION_OFFSET 900 // 900 - Default adc offset in uV
#define MIN_CALIBRATION_OFFSET 100 // Min value for calibration
#define PID_POWER_LIMIT 120 // Sets the max pwm power limit
@@ -157,6 +157,7 @@
#define DEVICE_HAS_VALIDATION_SUPPORT
#define TEMP_NTC
#define ACCEL_BMA
#define CUSTOM_MAX_TEMP_C 1 // Uses custom max temp lookup
#define ACCEL_SC7
#define HALL_SENSOR
#define HALL_SI7210