A bit of clean-up & update configuration.h files (#1717)

* BSP/configuration.h: update & clean-up macro defines

* BSP/MHP30/configuration.h: add lost-during-update macro

source/Core/BSP/MHP30/configuration.h

@@ -1,11 +1,10 @@
 #ifndef CONFIGURATION_H_
 #define CONFIGURATION_H_
 #include "Settings.h"
-#include "configuration.h"
 #include <stdint.h>
 /**
  * Configuration.h
- * Define here your default pre settings for TS80 or TS100
+ * Define here your default pre settings for MHP30
  *
  */
 
@@ -86,13 +85,9 @@
 #define ADC_MAX_READING (4096 * 8) // Maximum reading of the adc
 #define ADC_VDD_MV      3300       // ADC max reading millivolts
 
-#ifdef MODEL_TS100
-#define POWER_PULSE_DEFAULT 0
-#else
-#define POWER_PULSE_DEFAULT 5
-#endif
 #define POWER_PULSE_WAIT_DEFAULT     4 // Default rate of the power pulse: 4*2500 = 10000 ms = 10 s
 #define POWER_PULSE_DURATION_DEFAULT 1 // Default duration of the power pulse: 1*250 = 250 ms
+#define POWER_PULSE_DEFAULT          5
 
 /**
  * OLED Orientation Sensitivity on Automatic mode!
@@ -169,12 +164,13 @@
 #define HARDWARE_MAX_WATTAGE_X10 650
 #define TIP_THERMAL_MASS         65 // TODO, needs refinement
 #define TIP_RESISTANCE           60 // x10 ohms, ~6 typical
-#endif
+#endif /* MHP30 */
 
 #ifdef ACCEL_EXITS_ON_MOVEMENT
 #define NO_SLEEP_MODE
 #endif
-#endif
 
 #define FLASH_LOGOADDR (0x08000000 + (62 * 1024))
 #define SETTINGS_START_PAGE (0x08000000 + (127 * 1024))
+
+#endif /* CONFIGURATION_H_ */

source/Core/BSP/Miniware/configuration.h

@@ -4,7 +4,7 @@
 #include <stdint.h>
 /**
  * Configuration.h
- * Define here your default pre settings for TS80(P) or TS100
+ * Define here your default pre settings for TS80(P) or TS10(0/1)
  *
  */
 

source/Core/BSP/Pinecil/configuration.h

@@ -86,7 +86,7 @@
 #define POWER_PULSE_DEFAULT 0
 #else
 #define POWER_PULSE_DEFAULT 5
-#endif
+#endif /* Pinecil */
 #define POWER_PULSE_WAIT_DEFAULT     4 // Default rate of the power pulse: 4*2500 = 10000 ms = 10 s
 #define POWER_PULSE_DURATION_DEFAULT 1 // Default duration of the power pulse: 1*250 = 250 ms
 
@@ -164,10 +164,11 @@
 #define TIP_THERMAL_MASS         65 // X10 watts to raise 1 deg C in 1 second
 #define TIP_RESISTANCE           75 // x10 ohms, 7.5 typical for Pinecil tips
 #define CANT_DIRECT_READ_SETTINGS
-#endif
+#endif /* Pinecil */
-#endif
 
 #define FLASH_LOGOADDR      (0x08000000 + (126 * 1024))
 #define SETTINGS_START_PAGE (0x08000000 + (127 * 1024))
 
 #define HAS_POWER_DEBUG_MENU
+
+#endif /* CONFIGURATION_H_ */

source/Core/BSP/Pinecilv2/configuration.h

@@ -4,7 +4,7 @@
 #include <stdint.h>
 /**
  * Configuration.h
- * Define here your default pre settings for Pinecil
+ * Define here your default pre settings for Pinecilv2
  *
  */
 
@@ -87,7 +87,7 @@
 #define POWER_PULSE_DEFAULT 0
 #else
 #define POWER_PULSE_DEFAULT 5
-#endif
+#endif /* Pinecil */
 #define POWER_PULSE_WAIT_DEFAULT     4 // Default rate of the power pulse: 4*2500 = 10000 ms = 10 s
 #define POWER_PULSE_DURATION_DEFAULT 1 // Default duration of the power pulse: 1*250 = 250 ms
 
@@ -165,9 +165,10 @@
 #define BLE_ENABLED
 #define NEEDS_VBUS_PROBE 0
 #define CANT_DIRECT_READ_SETTINGS
-#endif
+#endif /* Pinecilv2 */
-#endif
 
 #define FLASH_LOGOADDR (0x23000000 + (1022 * 1024))
 #define FLASH_PAGE_SIZE (1024)
 #define SETTINGS_START_PAGE (1023 * FLASH_PAGE_SIZE) // Hal auto offsets base addr
+
+#endif /* CONFIGURATION_H_ */

source/Core/BSP/Sequre_S60/configuration.h

@@ -4,7 +4,7 @@
 #include <stdint.h>
 /**
  * Configuration.h
- * Define here your default pre settings for TS80(P) or S60
+ * Define here your default pre settings for S60
  *
  */
 
@@ -163,9 +163,9 @@
 #define OLED_I2CBB2
 
 #define MODEL_HAS_DCDC // We dont have DC/DC but have reallly fast PWM that gets us roughly the same place
-#endif
+#endif /* S60 */
-
-#endif
 
 #define FLASH_LOGOADDR      (0x08000000 + (62 * 1024))
 #define SETTINGS_START_PAGE (0x08000000 + (63 * 1024))
+
+#endif /* CONFIGURATION_H_ */