From 29819cf50f3e66adb4ad38422c9a36aa7c9e6004 Mon Sep 17 00:00:00 2001 From: Federico Di Lorenzo <68966053+federicodilo@users.noreply.github.com> Date: Tue, 6 Dec 2022 20:21:34 +0100 Subject: [PATCH 01/35] Revision on IT translation --- Translations/translation_IT.json | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Translations/translation_IT.json b/Translations/translation_IT.json index 9127e800..362ded6e 100644 --- a/Translations/translation_IT.json +++ b/Translations/translation_IT.json @@ -3,7 +3,7 @@ "languageLocalName": "Italiano", "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Prima di riavvire assicurarsi che la punta e l'impugnatura siano a temperatura ambiente!", + "SettingsCalibrationWarning": "Prima di riavvire assicurati che la punta e l'impugnatura siano a temperatura ambiente!", "CJCCalibrating": "Calibrazione in corso", "SettingsResetWarning": "Ripristinare le impostazioni iniziali?", "UVLOWarningString": "DC BASSA", @@ -18,7 +18,7 @@ "messagesWarn": { "CJCCalibrationDone": [ "Calibrazione", - "completata" + "completata!" ], "ResetOKMessage": "Reset OK", "SettingsResetMessage": [ @@ -293,7 +293,7 @@ "Calibra T", "all'avvio" ], - "desc": "La calibrazione della termocoppia verrà effettuata al prossimo riavvio (non necessario se il Delta T<5 °C)" + "desc": "Calibra le rilevazioni di temperatura al prossimo riavvio (non necessario se il Delta T<5 °C)" }, "VoltageCalibration": { "text2": [ @@ -338,4 +338,4 @@ "desc": "" } } -} \ No newline at end of file +} From e8cac79923ae025a3e419960a71191a5274cd69d Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Thu, 8 Dec 2022 00:47:31 +0100 Subject: [PATCH 02/35] removed some redundant lines --- source/Core/Drivers/Font.h | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-) diff --git a/source/Core/Drivers/Font.h b/source/Core/Drivers/Font.h index d098f6f8..6ec3b0ca 100644 --- a/source/Core/Drivers/Font.h +++ b/source/Core/Drivers/Font.h @@ -93,23 +93,7 @@ const uint8_t WarningBlock24[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x30, 0x0C, 0x02, 0xF1, 0xF1, 0xF1, 0x02, 0x0C, 0x30, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xB0, 0x8C, 0x83, 0x80, 0x80, 0x80, 0x80, 0xB3, 0xB3, 0xB3, 0x80, 0x80, 0x80, 0x80, 0x83, 0x8C, 0xB0, 0xC0, 0x00, 0x00}; -#if defined(MODEL_TS100) + defined(MODEL_Pinecil) > 0 -const uint8_t buttonA[] = { - // width = 42 - // height = 16 - 0x00, 0x00, 0x00, 0x00, 0xe0, 0x18, 0x04, 0x02, 0x02, 0x01, 0x81, 0x49, 0x31, 0x01, 0xc1, 0x25, 0x19, 0x01, 0xc1, 0x25, 0x19, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, - 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x02, 0x04, 0x18, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x18, 0x20, 0x40, 0x40, 0x80, 0x89, 0x8a, 0x88, 0x94, - 0x8c, 0x94, 0xae, 0x80, 0xbe, 0x8e, 0xa6, 0x8e, 0xa6, 0x8e, 0xa6, 0x8e, 0xa6, 0x8a, 0xa6, 0x8a, 0xa6, 0x8a, 0xa6, 0x8a, 0x46, 0x4a, 0x22, 0x18, 0x07, 0x00, 0x00, 0x00}; - -const uint8_t disconnectedTip[] = { - // width = 42 - // height = 16 - 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0xc0, 0x00, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xcc, 0x9c, 0x38, 0x70, 0xe0, 0xc0, 0x80, 0x20, 0x70, 0x38, 0x1c, 0xcc, 0x40, - 0x80, 0x00, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xc0, 0x60, 0xe0, 0x00, 0x01, 0x01, 0x01, 0x02, 0x01, 0x02, 0x05, 0x00, 0x07, 0x01, 0x04, 0x01, 0x04, 0x01, - 0x04, 0x31, 0x38, 0x1c, 0x0e, 0x04, 0x01, 0x03, 0x07, 0x0e, 0x1c, 0x39, 0x30, 0x01, 0x03, 0x00, 0x02, 0x01, 0x02, 0x01, 0x02, 0x01, 0x02, 0x01, 0x04, 0x09, 0x0f, 0x00}; -#endif - -#if defined(MODEL_Pinecilv2) >= 1 +#if defined(MODEL_TS100) + defined(MODEL_Pinecil) + defined(MODEL_Pinecilv2) > 0 const uint8_t buttonA[] = { // width = 42 // height = 16 From 9966274a3dd1286ff690f7dbba15ef7904d310be Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Sat, 10 Dec 2022 11:34:37 +0100 Subject: [PATCH 03/35] show correct message after factory reset_I --- source/Core/Src/settingsGUI.cpp | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/Core/Src/settingsGUI.cpp b/source/Core/Src/settingsGUI.cpp index 74d93481..a5b79656 100644 --- a/source/Core/Src/settingsGUI.cpp +++ b/source/Core/Src/settingsGUI.cpp @@ -719,7 +719,7 @@ static void displayPowerPulseDuration(void) { OLED::printNumber(getSettingValue( static bool setResetSettings(void) { if (userConfirmation(translatedString(Tr->SettingsResetWarning))) { resetSettings(); - warnUser(translatedString(Tr->SettingsResetMessage), 10 * TICKS_SECOND); + warnUser(translatedString(Tr->ResetOKMessage), 10 * TICKS_SECOND); } return false; } From b26cfa3946288d9e8a454fdc8ba4c6d9df001f38 Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Sat, 10 Dec 2022 11:42:48 +0100 Subject: [PATCH 04/35] show correct message after factory reset_II --- Translations/translation_EN.json | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/Translations/translation_EN.json b/Translations/translation_EN.json index bd38d1b4..fec140a4 100644 --- a/Translations/translation_EN.json +++ b/Translations/translation_EN.json @@ -20,10 +20,13 @@ "Calibration", "done!" ], - "ResetOKMessage": "Reset OK", + "ResetOKMessage": [ + "Default setting", + "restored!" + ], "SettingsResetMessage": [ "Certain settings", - "were changed!" + "changed!" ], "NoAccelerometerMessage": [ "No accelerometer", @@ -338,4 +341,4 @@ "desc": "Toggle active language" } } -} \ No newline at end of file +} From ec3e89fc755cb0eed050d9216356bb740416fbd8 Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Sat, 10 Dec 2022 11:49:37 +0100 Subject: [PATCH 05/35] show correct message after factory reset_III --- source/Core/Inc/Translation.h | 1 + 1 file changed, 1 insertion(+) diff --git a/source/Core/Inc/Translation.h b/source/Core/Inc/Translation.h index 3235237c..8b448d55 100644 --- a/source/Core/Inc/Translation.h +++ b/source/Core/Inc/Translation.h @@ -75,6 +75,7 @@ enum class SettingsItemIndex : uint8_t { struct TranslationIndexTable { uint16_t SettingsCalibrationWarning; uint16_t CJCCalibrating; + uint16_t ResetOKMessage; uint16_t SettingsResetWarning; uint16_t UVLOWarningString; uint16_t UndervoltageString; From 0a9b70dc03124ab5b38aad99c5e639217bf1fa09 Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Sat, 10 Dec 2022 11:59:27 +0100 Subject: [PATCH 06/35] show correct message after factory reset_IV --- Translations/translations_def.js | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/Translations/translations_def.js b/Translations/translations_def.js index e465c2a8..b9d8cb43 100644 --- a/Translations/translations_def.js +++ b/Translations/translations_def.js @@ -8,9 +8,13 @@ var def = /// "id": "CJCCalibrating", "description": "Message indicating CJC is being calibrated." }, + { + "id": "ResetOKMessage", + "description": "Confirmation message shown after a successful settings-reset." + }, { "id": "SettingsResetWarning", - "description": "Confirmation message shown before confirming a settings reset." + "description": "Messasge shown after a firmware update if certain settings have been changed." }, { "id": "UVLOWarningString", From e2b1b149af2a83d111c5b28e024c00d8ce383237 Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Sat, 10 Dec 2022 12:16:23 +0100 Subject: [PATCH 07/35] show correct message after factory reset_V --- Translations/translations_def.js | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/Translations/translations_def.js b/Translations/translations_def.js index b9d8cb43..c9f89af1 100644 --- a/Translations/translations_def.js +++ b/Translations/translations_def.js @@ -8,13 +8,9 @@ var def = /// "id": "CJCCalibrating", "description": "Message indicating CJC is being calibrated." }, - { - "id": "ResetOKMessage", - "description": "Confirmation message shown after a successful settings-reset." - }, { "id": "SettingsResetWarning", - "description": "Messasge shown after a firmware update if certain settings have been changed." + "description": "Warning shown before confirming a settings reset." }, { "id": "UVLOWarningString", @@ -62,9 +58,13 @@ var def = /// "id": "CJCCalibrationDone", "description": "Confirmation message indicating CJC calibration is complete." }, + { + "id": "ResetOKMessage", + "description": "Confirmation message shown after a successful settings-reset." + }, { "id": "SettingsResetMessage", - "description": "Shown when the settings are reset to factory defaults either by the user or by incompatible firmware changes." + "description": "Shown after a firmware update when certain settings have been reset to factory defaults due to incompatible firmware changes." }, { "id": "NoAccelerometerMessage", From 372dac4cf56ec86934725f6918d8b337adae9e16 Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Sat, 10 Dec 2022 12:25:53 +0100 Subject: [PATCH 08/35] show correct message after factory reset_VI --- source/Core/Inc/Translation.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/Core/Inc/Translation.h b/source/Core/Inc/Translation.h index 8b448d55..c658f63b 100644 --- a/source/Core/Inc/Translation.h +++ b/source/Core/Inc/Translation.h @@ -75,7 +75,6 @@ enum class SettingsItemIndex : uint8_t { struct TranslationIndexTable { uint16_t SettingsCalibrationWarning; uint16_t CJCCalibrating; - uint16_t ResetOKMessage; uint16_t SettingsResetWarning; uint16_t UVLOWarningString; uint16_t UndervoltageString; @@ -88,6 +87,7 @@ struct TranslationIndexTable { uint16_t DeviceFailedValidationWarning; uint16_t CJCCalibrationDone; + uint16_t ResetOKMessage; uint16_t SettingsResetMessage; uint16_t NoAccelerometerMessage; uint16_t NoPowerDeliveryMessage; From ff088965d621a0e639fa2a7ba9da2ce8e60d74ac Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Sat, 10 Dec 2022 22:45:32 +0100 Subject: [PATCH 09/35] after reset go to home screen --- source/Core/Src/settingsGUI.cpp | 1 + 1 file changed, 1 insertion(+) diff --git a/source/Core/Src/settingsGUI.cpp b/source/Core/Src/settingsGUI.cpp index a5b79656..303a82b5 100644 --- a/source/Core/Src/settingsGUI.cpp +++ b/source/Core/Src/settingsGUI.cpp @@ -720,6 +720,7 @@ static bool setResetSettings(void) { if (userConfirmation(translatedString(Tr->SettingsResetWarning))) { resetSettings(); warnUser(translatedString(Tr->ResetOKMessage), 10 * TICKS_SECOND); + return; } return false; } From 110af42e3e79c81827822eec3e38a7eae8e435a7 Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Sat, 10 Dec 2022 22:47:49 +0100 Subject: [PATCH 10/35] after reset go to home screen_II --- source/Core/Src/settingsGUI.cpp | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/Core/Src/settingsGUI.cpp b/source/Core/Src/settingsGUI.cpp index 303a82b5..5cfba671 100644 --- a/source/Core/Src/settingsGUI.cpp +++ b/source/Core/Src/settingsGUI.cpp @@ -720,7 +720,7 @@ static bool setResetSettings(void) { if (userConfirmation(translatedString(Tr->SettingsResetWarning))) { resetSettings(); warnUser(translatedString(Tr->ResetOKMessage), 10 * TICKS_SECOND); - return; + return 1; } return false; } From 863f091ffd0321cffb5537d348f17ad84b61c5aa Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Sat, 10 Dec 2022 22:54:08 +0100 Subject: [PATCH 11/35] after reset go to home screen_III --- source/Core/Src/settingsGUI.cpp | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/Core/Src/settingsGUI.cpp b/source/Core/Src/settingsGUI.cpp index 5cfba671..b41af0de 100644 --- a/source/Core/Src/settingsGUI.cpp +++ b/source/Core/Src/settingsGUI.cpp @@ -720,7 +720,7 @@ static bool setResetSettings(void) { if (userConfirmation(translatedString(Tr->SettingsResetWarning))) { resetSettings(); warnUser(translatedString(Tr->ResetOKMessage), 10 * TICKS_SECOND); - return 1; + return false; } return false; } From c08b06bb168bef328ce6051437e818e3529d71a7 Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Sat, 10 Dec 2022 23:07:09 +0100 Subject: [PATCH 12/35] after reset go to home screen_IV --- source/Core/Src/settingsGUI.cpp | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/Core/Src/settingsGUI.cpp b/source/Core/Src/settingsGUI.cpp index b41af0de..fb15748e 100644 --- a/source/Core/Src/settingsGUI.cpp +++ b/source/Core/Src/settingsGUI.cpp @@ -720,7 +720,7 @@ static bool setResetSettings(void) { if (userConfirmation(translatedString(Tr->SettingsResetWarning))) { resetSettings(); warnUser(translatedString(Tr->ResetOKMessage), 10 * TICKS_SECOND); - return false; + return 0; } return false; } From b934cacdfad7bc4acbbe78b9f7a5faff82046ef0 Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Sat, 10 Dec 2022 23:17:24 +0100 Subject: [PATCH 13/35] after reset go to home screen_V --- source/Core/Src/settingsGUI.cpp | 1 + 1 file changed, 1 insertion(+) diff --git a/source/Core/Src/settingsGUI.cpp b/source/Core/Src/settingsGUI.cpp index fb15748e..88d8b52c 100644 --- a/source/Core/Src/settingsGUI.cpp +++ b/source/Core/Src/settingsGUI.cpp @@ -720,6 +720,7 @@ static bool setResetSettings(void) { if (userConfirmation(translatedString(Tr->SettingsResetWarning))) { resetSettings(); warnUser(translatedString(Tr->ResetOKMessage), 10 * TICKS_SECOND); + break; return 0; } return false; From 74339a997c958f6ee7c155dcb207cb264e4c76ef Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Sat, 10 Dec 2022 23:24:10 +0100 Subject: [PATCH 14/35] after reset go to home screen_VI --- source/Core/Src/settingsGUI.cpp | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/source/Core/Src/settingsGUI.cpp b/source/Core/Src/settingsGUI.cpp index 88d8b52c..dbd08cb8 100644 --- a/source/Core/Src/settingsGUI.cpp +++ b/source/Core/Src/settingsGUI.cpp @@ -720,10 +720,8 @@ static bool setResetSettings(void) { if (userConfirmation(translatedString(Tr->SettingsResetWarning))) { resetSettings(); warnUser(translatedString(Tr->ResetOKMessage), 10 * TICKS_SECOND); - break; - return 0; } - return false; + return 0; } static void displayResetSettings(void) {} From 8a6b00fa58836af30a7e1a66579a26e2cf7faa36 Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Sat, 10 Dec 2022 23:30:26 +0100 Subject: [PATCH 15/35] reverting (go to home screen did not work) --- source/Core/Src/settingsGUI.cpp | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/Core/Src/settingsGUI.cpp b/source/Core/Src/settingsGUI.cpp index dbd08cb8..a5b79656 100644 --- a/source/Core/Src/settingsGUI.cpp +++ b/source/Core/Src/settingsGUI.cpp @@ -721,7 +721,7 @@ static bool setResetSettings(void) { resetSettings(); warnUser(translatedString(Tr->ResetOKMessage), 10 * TICKS_SECOND); } - return 0; + return false; } static void displayResetSettings(void) {} From 2a7cacd7feb56ac3685069dc056facb15b8c2115 Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Sat, 10 Dec 2022 23:37:27 +0100 Subject: [PATCH 16/35] typo fix --- Translations/translation_EN.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Translations/translation_EN.json b/Translations/translation_EN.json index fec140a4..ff0982e2 100644 --- a/Translations/translation_EN.json +++ b/Translations/translation_EN.json @@ -21,7 +21,7 @@ "done!" ], "ResetOKMessage": [ - "Default setting", + "Default settings", "restored!" ], "SettingsResetMessage": [ From b0b261f7854bbbe5f6ef7ed79e663fc99f8519d7 Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Sat, 10 Dec 2022 23:46:11 +0100 Subject: [PATCH 17/35] large reset confirmation_I --- Translations/translation_EN.json | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/Translations/translation_EN.json b/Translations/translation_EN.json index ff0982e2..14405cc7 100644 --- a/Translations/translation_EN.json +++ b/Translations/translation_EN.json @@ -20,10 +20,7 @@ "Calibration", "done!" ], - "ResetOKMessage": [ - "Default settings", - "restored!" - ], + "ResetOKMessage": "Reset OK", "SettingsResetMessage": [ "Certain settings", "changed!" From f6b4efbee70b8546c7f5bea0ae6f7fd83868568b Mon Sep 17 00:00:00 2001 From: jonnieZG Date: Tue, 13 Dec 2022 13:21:32 +0100 Subject: [PATCH 18/35] Update translation_HR.json Updated Croatian translations --- Translations/translation_HR.json | 683 ++++++++++++++++--------------- 1 file changed, 343 insertions(+), 340 deletions(-) diff --git a/Translations/translation_HR.json b/Translations/translation_HR.json index 413cc867..a0cd93fb 100644 --- a/Translations/translation_HR.json +++ b/Translations/translation_HR.json @@ -1,341 +1,344 @@ { - "languageCode": "HR", - "languageLocalName": "Hrvatski", - "tempUnitFahrenheit": false, - "messages": { - "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", - "CJCCalibrating": "calibrating", - "SettingsResetWarning": "Jeste li sigurni da želite sve postavke vratiti na tvorničke vrijednosti?", - "UVLOWarningString": "BATERIJA", - "UndervoltageString": "PRENIZAK NAPON", - "InputVoltageString": "Napajanje: ", - "SleepingSimpleString": "Zzz ", - "SleepingAdvancedString": "SPAVANJE...", - "SleepingTipAdvancedString": "Vrh: ", - "OffString": "Off", - "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" - }, - "messagesWarn": { - "CJCCalibrationDone": [ - "Calibration", - "done!" - ], - "ResetOKMessage": "Reset OK", - "SettingsResetMessage": [ - "Certain settings", - "were changed!" - ], - "NoAccelerometerMessage": [ - "No accelerometer", - "detected!" - ], - "NoPowerDeliveryMessage": [ - "No USB-PD IC", - "detected!" - ], - "LockingKeysString": "LOCKED", - "UnlockingKeysString": "UNLOCKED", - "WarningKeysLockedString": "!LOCKED!", - "WarningThermalRunaway": [ - "Thermal", - "Runaway" - ] - }, - "characters": { - "SettingRightChar": "D", - "SettingLeftChar": "L", - "SettingAutoChar": "A", - "SettingOffChar": "O", - "SettingSlowChar": "S", - "SettingMediumChar": "M", - "SettingFastChar": "B", - "SettingStartNoneChar": "I", - "SettingStartSolderingChar": "L", - "SettingStartSleepChar": "R", - "SettingStartSleepOffChar": "S", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", - "SettingLockDisableChar": "D", - "SettingLockBoostChar": "B", - "SettingLockFullChar": "F" - }, - "menuGroups": { - "PowerMenu": { - "text2": [ - "Power", - "settings" - ], - "desc": "" - }, - "SolderingMenu": { - "text2": [ - "Postavke", - "lemljenja" - ], - "desc": "" - }, - "PowerSavingMenu": { - "text2": [ - "Ušteda", - "energije" - ], - "desc": "" - }, - "UIMenu": { - "text2": [ - "Korisničko", - "sučelje" - ], - "desc": "" - }, - "AdvancedMenu": { - "text2": [ - "Napredne", - "opcije" - ], - "desc": "" - } - }, - "menuOptions": { - "DCInCutoff": { - "text2": [ - "Izvor", - "napajanja" - ], - "desc": "Izvor napajanja. Postavlja napon isključivanja. (DC 10V) (S 3.3V po ćeliji)" - }, - "MinVolCell": { - "text2": [ - "Minimum", - "voltage" - ], - "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)" - }, - "QCMaxVoltage": { - "text2": [ - "Snaga", - "napajanja" - ], - "desc": "Snaga modula za napajanje" - }, - "PDNegTimeout": { - "text2": [ - "PD", - "timeout" - ], - "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers" - }, - "BoostTemperature": { - "text2": [ - "Boost", - "temp" - ], - "desc": "Temperatura u pojačanom (Boost) načinu." - }, - "AutoStart": { - "text2": [ - "Auto", - "start" - ], - "desc": "Ako je aktivno, lemilica po uključivanju napajanja odmah počinje grijati. (I=isključeno | L=lemljenje | R=rezervni | S=rezervni sobna temperatura)" - }, - "TempChangeShortStep": { - "text2": [ - "Temp change", - "short" - ], - "desc": "Temperature-change-increment on short button press" - }, - "TempChangeLongStep": { - "text2": [ - "Temp change", - "long" - ], - "desc": "Temperature-change-increment on long button press" - }, - "LockingMode": { - "text2": [ - "Allow locking", - "buttons" - ], - "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)" - }, - "MotionSensitivity": { - "text2": [ - "Osjetljivost", - "pokreta" - ], - "desc": "Osjetljivost prepoznavanja pokreta. (0=Ugašeno | 1=Najmanje osjetljivo | ... | 9=Najosjetljivije)" - }, - "SleepTemperature": { - "text2": [ - "Temp", - "spavanja" - ], - "desc": "Temperatura na koju se spušta lemilica nakon određenog vremena mirovanja. (C | F)" - }, - "SleepTimeout": { - "text2": [ - "Vrijeme", - "spavanja" - ], - "desc": "Vrijeme mirovanja nakon kojega lemilica spušta temperaturu. (Minute | Sekunde)" - }, - "ShutdownTimeout": { - "text2": [ - "Vrijeme", - "gašenja" - ], - "desc": "Vrijeme mirovanja nakon kojega će se lemilica ugasiti. (Minute)" - }, - "HallEffSensitivity": { - "text2": [ - "Hall sensor", - "sensitivity" - ], - "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=Ugašeno | 1=Najmanje osjetljivo | ... | 9=Najosjetljivije)" - }, - "TemperatureUnit": { - "text2": [ - "Jedinica", - "temperature" - ], - "desc": "Jedinica temperature. (C=Celzij | F=Fahrenheit)" - }, - "DisplayRotation": { - "text2": [ - "Rotacija", - "ekrana" - ], - "desc": "Orijentacija ekrana. (D=Desnoruki | L=Ljevoruki | A=Automatski)" - }, - "CooldownBlink": { - "text2": [ - "Upozorenje", - "pri hlađenju" - ], - "desc": "Bljeskanje temperature prilikom hlađenja, ako je lemilica vruća." - }, - "ScrollingSpeed": { - "text2": [ - "Brzina", - "poruka" - ], - "desc": "Brzina kretanja dugačkih poruka. (B=brzo | S=sporo)" - }, - "ReverseButtonTempChange": { - "text2": [ - "Swap", - "+ - keys" - ], - "desc": "Reverse assignment of buttons for temperature adjustment" - }, - "AnimSpeed": { - "text2": [ - "Anim.", - "speed" - ], - "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | B=fast)" - }, - "AnimLoop": { - "text2": [ - "Anim.", - "loop" - ], - "desc": "Loop icon animations in main menu" - }, - "Brightness": { - "text2": [ - "Screen", - "brightness" - ], - "desc": "Adjust the OLED screen brightness" - }, - "ColourInversion": { - "text2": [ - "Invert", - "screen" - ], - "desc": "Invert the OLED screen colors" - }, - "LOGOTime": { - "text2": [ - "Boot logo", - "duration" - ], - "desc": "Set boot logo duration (s=seconds)" - }, - "AdvancedIdle": { - "text2": [ - "Detalji", - "pri čekanju" - ], - "desc": "Prikazivanje detaljnih informacija tijekom čekanja." - }, - "AdvancedSoldering": { - "text2": [ - "Detalji", - "pri lemljenju" - ], - "desc": "Prikazivanje detaljnih informacija tijekom lemljenja." - }, - "PowerLimit": { - "text2": [ - "Power", - "limit" - ], - "desc": "Maximum power the iron can use (W=watt)" - }, - "CalibrateCJC": { - "text2": [ - "Calibrate CJC", - "at next boot" - ], - "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" - }, - "VoltageCalibration": { - "text2": [ - "Kalibracija", - "napona napajanja" - ], - "desc": "Kalibracija ulaznog napona. Podešavanje gumbima, dugački pritisak za kraj." - }, - "PowerPulsePower": { - "text2": [ - "Power", - "pulse" - ], - "desc": "Intensity of power of keep-awake-pulse (W=watt)" - }, - "PowerPulseWait": { - "text2": [ - "Power pulse", - "delay" - ], - "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)" - }, - "PowerPulseDuration": { - "text2": [ - "Power pulse", - "duration" - ], - "desc": "Keep-awake-pulse duration (x 250ms)" - }, - "SettingsReset": { - "text2": [ - "Tvorničke", - "postavke" - ], - "desc": "Vraćanje svih postavki na tvorničke vrijednosti." - }, - "LanguageSwitch": { - "text2": [ - "Jezik:", - " HR Hrvatski" - ], - "desc": "" - } - } -} \ No newline at end of file + "languageCode": "HR", + "languageLocalName": "Hrvatski", + "tempUnitFahrenheit": false, + "messages": { + "SettingsCalibrationWarning": "Prije restarta provjerite da su vrh i ručka na sobnoj temperaturi!", + "CJCCalibrating": "kalibriram", + "SettingsResetWarning": "Jeste li sigurni da želite sve postavke vratiti na tvorničke vrijednosti?", + "UVLOWarningString": "BAT!!!", + "UndervoltageString": "PRENIZAK NAPON", + "InputVoltageString": "Napon V: ", + "SleepingSimpleString": "Zzz ", + "SleepingAdvancedString": "SPAVAM...", + "SleepingTipAdvancedString": "Vrh: ", + "OffString": "Off", + "DeviceFailedValidationWarning": "Vaš uređaj je najvjerojatnije krivotvoren!" + }, + "messagesWarn": { + "CJCCalibrationDone": [ + "Kalibracija", + "dovršena!" + ], + "ResetOKMessage": "Reset OK", + "SettingsResetMessage": [ + "Neke postavke", + "su izmijenjene!" + ], + "NoAccelerometerMessage": [ + "Akcelerometar", + "nije pronađen!" + ], + "NoPowerDeliveryMessage": [ + "USB-PD IC", + "nije pronađen!" + ], + "LockingKeysString": "ZAKLJUČ", + "UnlockingKeysString": "OTKLJUČ", + "WarningKeysLockedString": "ZAKLJUČ!", + "WarningThermalRunaway": [ + "Neispravan", + "grijač" + ] + }, + "characters": { + "SettingRightChar": "D", + "SettingLeftChar": "L", + "SettingAutoChar": "A", + "SettingOffChar": "U", + "SettingSlowChar": "S", + "SettingMediumChar": "M", + "SettingFastChar": "B", + "SettingStartNoneChar": "U", + "SettingStartSolderingChar": "L", + "SettingStartSleepChar": "T", + "SettingStartSleepOffChar": "H", + "SettingSensitivityOff": "U", + "SettingSensitivityLow": "N", + "SettingSensitivityMedium": "S", + "SettingSensitivityHigh": "V", + "SettingLockDisableChar": "O", + "SettingLockBoostChar": "B", + "SettingLockFullChar": "Z" + }, + "menuGroups": { + "PowerMenu": { + "text2": [ + "Postavke", + "napajanja" + ], + "desc": "Postavke napajanja (baterije, punjač, USB-PD itd.)" + }, + "SolderingMenu": { + "text2": [ + "Postavke", + "lemljenja" + ], + "desc": "Postavke lemljenja, pojačani način, kako se lemilica ponaša" + }, + "PowerSavingMenu": { + "text2": [ + "Ušteda", + "energije" + ], + "desc": "Spavanje, načini uštede energije gašenjem uređaja" + }, + "UIMenu": { + "text2": [ + "Korisničko", + "sučelje" + ], + "desc": "Interakcija s korisnikom (izgled, animacije, jedinice itd.)" + }, + "AdvancedMenu": { + "text2": [ + "Napredne", + "opcije" + ], + "desc": "Napredne i ostale opcije" + } + }, + "menuOptions": { + "DCInCutoff": { + "text2": [ + "Izvor", + "napajanja" + ], + "desc": "Izvor napajanja. Postavlja napon isključivanja. (DC 10V) (S 3.3V po ćeliji)" + }, + "MinVolCell": { + "text2": [ + "Najniži", + "napon" + ], + "desc": "Najniži dozvoljeni napon po ćeliji baterije (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)" + }, + "QCMaxVoltage": { + "text2": [ + "Snaga", + "napajanja" + ], + "desc": "Snaga modula za napajanje" + }, + "PDNegTimeout": { + "text2": [ + "USB-PD", + "timeout" + ], + "desc": "Timeout za USB-Power Delivery u koracima od 100ms za kompatibilnost s nekim QC punjačima" + }, + "BoostTemperature": { + "text2": [ + "Boost", + "temp" + ], + "desc": "Temperatura u pojačanom (Boost) načinu." + }, + "AutoStart": { + "text2": [ + "Auto", + "start" + ], + "desc": "Ako je aktivno, lemilica po uključivanju napajanja odmah počinje grijati. (U=ugašeno | L=lemljenje | T=spavanje toplo | H=spavanje hladno)" + }, + "TempChangeShortStep": { + "text2": [ + "Korak temp", + "kratki pritisak" + ], + "desc": "Korak temperature pri kratkom pritisku tipke" + }, + "TempChangeLongStep": { + "text2": [ + "Korak temp", + "dugi pritisak" + ], + "desc": "Korak temperature pri dugačkom pritisku tipke" + }, + "LockingMode": { + "text2": [ + "Zaključavanje", + "tipki" + ], + "desc": "Tokom lemljenja, držite obje tipke kako biste ih zaključali ili otključali (O=otključano | B=zaključan boost | Z=zaključano sve)" + }, + "MotionSensitivity": { + "text2": [ + "Osjetljivost", + "pokreta" + ], + "desc": "Osjetljivost prepoznavanja pokreta. (0=ugašeno | 1=najmanje osjetljivo | ... | 9=najosjetljivije)" + }, + "SleepTemperature": { + "text2": [ + "Temp", + "spavanja" + ], + "desc": "Temperatura na koju se spušta lemilica nakon određenog vremena mirovanja (C | F)" + }, + "SleepTimeout": { + "text2": [ + "Vrijeme", + "spavanja" + ], + "desc": "Vrijeme mirovanja nakon kojega lemilica spušta temperaturu. (Minute | Sekunde)" + }, + "ShutdownTimeout": { + "text2": [ + "Vrijeme", + "gašenja" + ], + "desc": "Vrijeme mirovanja nakon kojega će se lemilica ugasiti (Minute)" + }, + "HallEffSensitivity": { + "text2": [ + "Osjetljivost", + "Hall senzora" + ], + "desc": "Osjetljivost senzora magnetskog polja za detekciju spavanja (U=Ugašeno | N=Najmanja | S=Srednja | V=Visoka)" + }, + "TemperatureUnit": { + "text2": [ + "Jedinica", + "temperature" + ], + "desc": "Jedinica temperature (C=Celzij | F=Fahrenheit)" + }, + "DisplayRotation": { + "text2": [ + "Rotacija", + "ekrana" + ], + "desc": "Orijentacija ekrana (D=desnoruki | L=ljevoruki | A=automatski)" + }, + "CooldownBlink": { + "text2": [ + "Upozorenje", + "pri hlađenju" + ], + "desc": "Bljeskanje temperature prilikom hlađenja, ako je lemilica vruća" + }, + "ScrollingSpeed": { + "text2": [ + "Brzina", + "poruka" + ], + "desc": "Brzina kretanja dugačkih poruka (B=brzo | S=sporo)" + }, + "ReverseButtonTempChange": { + "text2": [ + "Zamjena", + "+ - tipki" + ], + "desc": "Zamjenjuje funkciju gornje i donje tipke za podešavanje temperature" + }, + "AnimSpeed": { + "text2": [ + "Brzina", + "animacije" + ], + "desc": "Brzina animacije ikona u menijima (U=ugašeno | S=sporo | M=srednje | B=brzo)" + }, + "AnimLoop": { + "text2": [ + "Ponavljanje", + "animacije" + ], + "desc": "Hoće li se animacije menija vrtiti u petlji - samo ako brzina animacije nije na \"Ugašeno\"" + }, + "Brightness": { + "text2": [ + "Svjetlina", + "ekrana" + ], + "desc": "Podešavanje svjetline OLED ekrana. Veća svjetlina može dugotrajno dovesti do pojave duhova na ekranu." + }, + "ColourInversion": { + "text2": [ + "Inverzija", + "ekrana" + ], + "desc": "Inverzan prikaz slike na ekranu" + }, + "LOGOTime": { + "text2": [ + "Trajanje", + "boot logotipa" + ], + "desc": "Trajanje prikaza boot logotipa (s=seconds)" + }, + "AdvancedIdle": { + "text2": [ + "Detalji", + "pri čekanju" + ], + "desc": "Prikazivanje detaljnih informacija tijekom čekanja" + }, + "AdvancedSoldering": { + "text2": [ + "Detalji", + "pri lemljenju" + ], + "desc": "Prikazivanje detaljnih informacija tijekom lemljenja" + }, + "PowerLimit": { + "text2": [ + "Ograničenje", + "snage" + ], + "desc": "Najveća snaga koju lemilica smije vući iz napajanja (W=watt)" + }, + "CalibrateCJC": { + "text2": [ + "Kalibracija kod", + "sljed. starta" + ], + "desc": "Kod sljedećeg starta izvršit će se kalibracija (nije potrebno ako je pogreška manja od 5°C)" + }, + "VoltageCalibration": { + "text2": [ + "Kalibracija", + "napajanja" + ], + "desc": "Kalibracija ulaznog napona napajanja (Podešavanje tipkama, dugački pritisak za kraj)" + }, + "PowerPulsePower": { + "text2": [ + "Snaga period.", + "pulsa napajanja" + ], + "desc": "Intenzitet periodičkog pulsa kojega lemilica povlači kako se USB napajanje ne bi ugasilo (W=watt)" + }, + "PowerPulseWait": { + "text2": [ + "Interval per.", + "pulsa nap." + ], + "desc": "Razmak periodičkih pulseva koje lemilica povlači kako se USB napajanje ne bi ugasilo (x 2.5s)" + }, + "PowerPulseDuration": { + "text2": [ + "Trajanje per.", + "pulsa nap." + ], + "desc": "Trajanje periodičkog pulsa kojega lemilica povlači kako se USB napajanje ne bi ugasilo (x 250ms)" + }, + "SettingsReset": { + "text2": [ + "Tvorničke", + "postavke" + ], + "desc": "Vraćanje svih postavki na tvorničke vrijednosti" + }, + "LanguageSwitch": { + "text2": [ + "Jezik:", + " HR Hrvatski" + ], + "desc": "Promjena jezika" + } + }, + "fonts": [ + "ascii_basic" + ] +} From 80d7423278213d5fd28ecc1ac49ff9d31f89a278 Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Wed, 14 Dec 2022 02:54:46 +0100 Subject: [PATCH 19/35] Add files via upload --- Translations/translation_BE.json | 20 ++++--------- Translations/translation_BG.json | 18 ++++-------- Translations/translation_CS.json | 18 ++++-------- Translations/translation_DA.json | 18 ++++-------- Translations/translation_DE.json | 18 ++++-------- Translations/translation_EL.json | 18 ++++-------- Translations/translation_EN.json | 16 +++-------- Translations/translation_ES.json | 18 ++++-------- Translations/translation_FI.json | 18 ++++-------- Translations/translation_FR.json | 18 ++++-------- Translations/translation_HR.json | 18 ++++-------- Translations/translation_HU.json | 18 ++++-------- Translations/translation_IT.json | 18 ++++-------- Translations/translation_JA_JP.json | 18 ++++-------- Translations/translation_LT.json | 18 ++++-------- Translations/translation_NB.json | 18 ++++-------- Translations/translation_NL.json | 18 ++++-------- Translations/translation_NL_BE.json | 18 ++++-------- Translations/translation_PL.json | 18 ++++-------- Translations/translation_PT.json | 18 ++++-------- Translations/translation_RO.json | 18 ++++-------- Translations/translation_RU.json | 18 ++++-------- Translations/translation_SK.json | 18 ++++-------- Translations/translation_SL.json | 18 ++++-------- Translations/translation_SR_CYRL.json | 18 ++++-------- Translations/translation_SR_LATN.json | 18 ++++-------- Translations/translation_SV.json | 18 ++++-------- Translations/translation_TR.json | 18 ++++-------- Translations/translation_UK.json | 18 ++++-------- Translations/translation_VI.json | 18 ++++-------- Translations/translation_YUE_HK.json | 18 ++++-------- Translations/translation_ZH_CN.json | 18 ++++-------- Translations/translation_ZH_TW.json | 18 ++++-------- Translations/translations_def.js | 41 --------------------------- 34 files changed, 165 insertions(+), 470 deletions(-) diff --git a/Translations/translation_BE.json b/Translations/translation_BE.json index 67b9ae2a..d11b7d45 100644 --- a/Translations/translation_BE.json +++ b/Translations/translation_BE.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Чаканне...", "SleepingTipAdvancedString": "Джала:", - "OffString": "Выкл.", "DeviceFailedValidationWarning": "Ваша прылада, хутчэй за ўсё, падробка!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "П", "SettingLeftChar": "Л", "SettingAutoChar": "А", - "SettingOffChar": "O", "SettingSlowChar": "М", "SettingMediumChar": "С", "SettingFastChar": "Х", - "SettingStartNoneChar": "В", "SettingStartSolderingChar": "П", "SettingStartSleepChar": "Ч", "SettingStartSleepOffChar": "К", - "SettingSensitivityOff": "А", - "SettingSensitivityLow": "Н", - "SettingSensitivityMedium": "С", - "SettingSensitivityHigh": "В", - "SettingLockDisableChar": "А", "SettingLockBoostChar": "Т", "SettingLockFullChar": "П" }, @@ -125,7 +117,7 @@ "PD", "прыпынак" ], - "desc": "Час чакання ўзгаднення PD з крокам 100 мс для сумяшчальнасці з некаторымі зараднымі зараднымі прыладамі QC (0: адключана)" + "desc": "Час чакання ўзгаднення PD з крокам 100 мс для сумяшчальнасці з некаторымі зараднымі зараднымі прыладамі QC" }, "BoostTemperature": { "text2": [ @@ -139,7 +131,7 @@ "Аўта", "старт" ], - "desc": "Рэжым, у якім запускаецца паяльнік пры падачы сілкавання (В=Выкл. | П=Пайка | Ч=Чаканне | К=Чаканне пры комн. тэмп.)" + "desc": "Рэжым, у якім запускаецца паяльнік пры падачы сілкавання (П=Пайка | Ч=Чаканне | К=Чаканне пры комн. тэмп.)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Дазволіць", "блок. кнопак" ], - "desc": "Пры рабоце падоўжаны націск дзьвух кнопак блакуе іх (А=Адключана | Т=Толькі турба | П=Поўная блакіроўка)" + "desc": "Пры рабоце падоўжаны націск дзьвух кнопак блакуе іх (Т=Толькі турба | П=Поўная блакіроўка)" }, "MotionSensitivity": { "text2": [ "Адчувальнасць", "акселерометра" ], - "desc": "Адчувальнасць акселерометра (0=Выкл. | 1=Мін. | ... | 9=Макс.)" + "desc": "Адчувальнасць акселерометра (1=Мін. | ... | 9=Макс.)" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Эфект Хола", "адчувальнасць" ], - "desc": "Узровень адчувальнасці датчыка хола ў рэжыме сну (0=Выкл. | 1=Мін. | ... | 9=Макс.)" + "desc": "Узровень адчувальнасці датчыка хола ў рэжыме сну (1=Мін. | ... | 9=Макс.)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Хуткасць", "анімацыі" ], - "desc": "Хуткасць анімацыі гузікаў у галоўным меню (Мілісекунды) (А=Адключана | Н=Нізкая | С=Сярэдняя | В=Высокая)" + "desc": "Хуткасць анімацыі гузікаў у галоўным меню (Мілісекунды) (Н=Нізкая | С=Сярэдняя | В=Высокая)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_BG.json b/Translations/translation_BG.json index e6715866..d6a946d5 100644 --- a/Translations/translation_BG.json +++ b/Translations/translation_BG.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Сън", "SleepingAdvancedString": "Хър Хър Хър...", "SleepingTipAdvancedString": "Връх:", - "OffString": "Изкл.", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "R", "SettingLeftChar": "L", "SettingAutoChar": "A", - "SettingOffChar": "O", "SettingSlowChar": "S", "SettingMediumChar": "M", "SettingFastChar": "F", - "SettingStartNoneChar": "И", "SettingStartSolderingChar": "Р", "SettingStartSleepChar": "С", "SettingStartSleepOffChar": "П", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", - "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -139,7 +131,7 @@ "Автоматичен", "работен режим" ], - "desc": "Режим на поялника при включване на захранването. (И=Изключен | Р=Работен | С=Сън | П=Сън температура помещение)" + "desc": "Режим на поялника при включване на захранването. (Р=Работен | С=Сън | П=Сън температура помещение)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Allow locking", "buttons" ], - "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)" + "desc": "While soldering, hold down both buttons to toggle locking them (B=boost mode only | F=full locking)" }, "MotionSensitivity": { "text2": [ "Усещане", "за движение" ], - "desc": "Усещане за движение (0=Изключено | 1=Слабо | ... | 9=Силно)" + "desc": "Усещане за движение (1=Слабо | ... | 9=Силно)" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Hall sensor", "sensitivity" ], - "desc": "Sensitivity to magnets (0=Изключено | 1=Слабо | ... | 9=Силно)" + "desc": "Sensitivity to magnets (1=Слабо | ... | 9=Силно)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Anim.", "speed" ], - "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)" + "desc": "Pace of icon animations in menu (S=slow | M=medium | F=fast)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_CS.json b/Translations/translation_CS.json index 6a7e6bf4..aef4cd4b 100644 --- a/Translations/translation_CS.json +++ b/Translations/translation_CS.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzz ", "SleepingAdvancedString": "Režim spánku...", "SleepingTipAdvancedString": "Hrot:", - "OffString": "Vyp", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "P", "SettingLeftChar": "L", "SettingAutoChar": "A", - "SettingOffChar": "D", "SettingSlowChar": "P", "SettingMediumChar": "S", "SettingFastChar": "R", - "SettingStartNoneChar": "V", "SettingStartSolderingChar": "P", "SettingStartSleepChar": "S", "SettingStartSleepOffChar": "M", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "M", - "SettingSensitivityMedium": "S", - "SettingSensitivityHigh": "V", - "SettingLockDisableChar": "Z", "SettingLockBoostChar": "B", "SettingLockFullChar": "U" }, @@ -139,7 +131,7 @@ "Chování", "při startu" ], - "desc": "V=vypnuto | P=pájecí teplota | S=spánková teplota | M=zahřát hrot po pohybu" + "desc": "P=pájecí teplota | S=spánková teplota | M=zahřát hrot po pohybu" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Povolit zamč.", "tlačítek" ], - "desc": "Při pájení podržte obě tlačítka pro jejich zamčení (Z=zakázáno | B=pouze v režimu boost | U=úplné zamčení)" + "desc": "Při pájení podržte obě tlačítka pro jejich zamčení (B=pouze v režimu boost | U=úplné zamčení)" }, "MotionSensitivity": { "text2": [ "Citlivost", "na pohyb" ], - "desc": "0=vyp | 1=nejméně citlivé | ... | 9=nejvíce citlivé" + "desc": "1=nejméně citlivé | ... | 9=nejvíce citlivé" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Citlivost", "Hall. čidla" ], - "desc": "Citlivost Hallova čidla pro detekci spánku (0=vypnuto | 1=nejméně citlivé | ... | 9=nejvíce citlivé)" + "desc": "Citlivost Hallova čidla pro detekci spánku (1=nejméně citlivé | ... | 9=nejvíce citlivé)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Anim.", "rychlost" ], - "desc": "Tempo animace ikon v menu (O=vypnuto | P=pomalu | S=středně | R=rychle)" + "desc": "Tempo animace ikon v menu (P=pomalu | S=středně | R=rychle)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_DA.json b/Translations/translation_DA.json index 37953a92..1628852d 100644 --- a/Translations/translation_DA.json +++ b/Translations/translation_DA.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Dvale...", "SleepingTipAdvancedString": "Tip:", - "OffString": "Off", "DeviceFailedValidationWarning": "Din enhed er højst sandsyneligt en Kopivare!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "H", "SettingLeftChar": "V", "SettingAutoChar": "A", - "SettingOffChar": "O", "SettingSlowChar": "S", "SettingMediumChar": "M", "SettingFastChar": "F", - "SettingStartNoneChar": "S", "SettingStartSolderingChar": "L", "SettingStartSleepChar": "D", "SettingStartSleepOffChar": "R", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", - "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -139,7 +131,7 @@ "Start-up", "Opførsel" ], - "desc": "Start automatisk med lodning når strøm sættes til. (S=Slukket | L=Lodning | D=Dvale tilstand | R=Dvale tilstand rumtemperatur)" + "desc": "Start automatisk med lodning når strøm sættes til. (L=Lodning | D=Dvale tilstand | R=Dvale tilstand rumtemperatur)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Tillad låsning", "af knapperne" ], - "desc": "Hold begge knapper nede under lodning for at låse dem (D=deaktiver | B=kun boost-tilstand | F=fuld låsning)" + "desc": "Hold begge knapper nede under lodning for at låse dem (B=kun boost-tilstand | F=fuld låsning)" }, "MotionSensitivity": { "text2": [ "Bevægelses", "følsomhed" ], - "desc": "Bevægelsesfølsomhed (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)" + "desc": "Bevægelsesfølsomhed (1=Mindst følsom | ... | 9=Mest følsom)" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Hall sensor", "følsomhed" ], - "desc": "følsomhed overfor magneten (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)" + "desc": "følsomhed overfor magneten (1=Mindst følsom | ... | 9=Mest følsom)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Anim.", "Hastighed" ], - "desc": "Hastigheden for ikonanimationer i menuen (O=fra | S=langsomt | M=medium | F=hurtigt)" + "desc": "Hastigheden for ikonanimationer i menuen (S=langsomt | M=medium | F=hurtigt)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_DE.json b/Translations/translation_DE.json index 2902ee61..b55307dd 100644 --- a/Translations/translation_DE.json +++ b/Translations/translation_DE.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Ruhemodus...", "SleepingTipAdvancedString": "Temp:", - "OffString": "Aus", "DeviceFailedValidationWarning": "Höchstwahrscheinlich ist das Gerät eine Fälschung!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "R", "SettingLeftChar": "L", "SettingAutoChar": "A", - "SettingOffChar": "A", "SettingSlowChar": "L", "SettingMediumChar": "M", "SettingFastChar": "S", - "SettingStartNoneChar": "A", "SettingStartSolderingChar": "L", "SettingStartSleepChar": "R", "SettingStartSleepOffChar": "K", - "SettingSensitivityOff": "A", - "SettingSensitivityLow": "N", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", - "SettingLockDisableChar": "A", "SettingLockBoostChar": "B", "SettingLockFullChar": "V" }, @@ -139,7 +131,7 @@ "Start im", "Lötmodus" ], - "desc": "Heizverhalten beim Einschalten der Spannungsversorgung (A=aus | L=Lötmodus | R=Ruhemodus | K=Ruhemodus mit kalter Spitze)" + "desc": "Heizverhalten beim Einschalten der Spannungsversorgung (L=Lötmodus | R=Ruhemodus | K=Ruhemodus mit kalter Spitze)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Tasten-", "sperre" ], - "desc": "Langes drücken beider Tasten im Lötmodus sperrt diese (A=aus | B=nur Boost | V=vollständig)" + "desc": "Langes drücken beider Tasten im Lötmodus sperrt diese (B=nur Boost | V=vollständig)" }, "MotionSensitivity": { "text2": [ "Bewegungs-", "empfindlichk." ], - "desc": "0=aus | 1=minimal | ... | 9=maximal" + "desc": "1=minimal | ... | 9=maximal" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Empfindlichkeit", "der Hall-Sonde" ], - "desc": "Empfindlichkeit der Hall-Sonde um den Ruhemodus auszulösen (0=aus | 1=minimal | ... | 9=maximal)" + "desc": "Empfindlichkeit der Hall-Sonde um den Ruhemodus auszulösen (1=minimal | ... | 9=maximal)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Anim.", "Geschw." ], - "desc": "Geschwindigkeit der Icon-Animationen im Menü (A=aus | L=langsam | M=mittel | S=schnell)" + "desc": "Geschwindigkeit der Icon-Animationen im Menü (L=langsam | M=mittel | S=schnell)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_EL.json b/Translations/translation_EL.json index 27971dab..6e5e41fe 100644 --- a/Translations/translation_EL.json +++ b/Translations/translation_EL.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Υπνος...", "SleepingTipAdvancedString": "Μύτη:", - "OffString": "Απ.", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -48,19 +47,12 @@ "SettingRightChar": "R", "SettingLeftChar": "L", "SettingAutoChar": "Α", - "SettingOffChar": "0", "SettingSlowChar": "Α", "SettingMediumChar": "Μ", "SettingFastChar": "Γ", - "SettingStartNoneChar": "0", "SettingStartSolderingChar": "Κ", "SettingStartSleepChar": "Ζ", "SettingStartSleepOffChar": "Υ", - "SettingSensitivityOff": "0", - "SettingSensitivityLow": "Χ", - "SettingSensitivityMedium": "Μ", - "SettingSensitivityHigh": "Υ", - "SettingLockDisableChar": "Α", "SettingLockBoostChar": "B", "SettingLockFullChar": "Π" }, @@ -142,7 +134,7 @@ "Ζέσταμα", "κατά την εν." ], - "desc": "0=off | Κ=θερμ. κόλλησης | Z=αναμονή σε θερμοκρασία ύπνου μέχρι την κίνηση | Υ=αναμονή χωρίς ζέσταμα μέχρι την κίνηση" + "desc": "Κ=θερμ. κόλλησης | Z=αναμονή σε θερμοκρασία ύπνου μέχρι την κίνηση | Υ=αναμονή χωρίς ζέσταμα μέχρι την κίνηση" }, "TempChangeShortStep": { "text2": [ @@ -163,14 +155,14 @@ "Κλείδωμα", "πλήκτρων" ], - "desc": "Κατά την κόλληση, κρατήστε και τα δύο πλήκτρα για κλείδωμα (A=απενεργοποίηση | B=μόνο λειτ. boost | Π=πλήρες κλείδωμα)" + "desc": "Κατά την κόλληση, κρατήστε και τα δύο πλήκτρα για κλείδωμα (B=μόνο λειτ. boost | Π=πλήρες κλείδωμα)" }, "MotionSensitivity": { "text2": [ "Ευαισθησία", "κίνησης" ], - "desc": "0=off | 1=λιγότερο ευαίσθητο | ... | 9=περισσότερο ευαίσθητο" + "desc": "1=λιγότερο ευαίσθητο | ... | 9=περισσότερο ευαίσθητο" }, "SleepTemperature": { "text2": [ @@ -198,7 +190,7 @@ "Ευαισθ. αισθ. ", "φαιν. Hall" ], - "desc": "Ευαισθησία του αισθητήρα φαινομένου Hall για εντοπισμό αδράνειας (0=off | 1=λιγότερο ευαίσθητο | ... | 9=περισσότερο ευαίσθητο)" + "desc": "Ευαισθησία του αισθητήρα φαινομένου Hall για εντοπισμό αδράνειας (1=λιγότερο ευαίσθητο | ... | 9=περισσότερο ευαίσθητο)" }, "TemperatureUnit": { "text2": [ @@ -240,7 +232,7 @@ "Ταχύτητα", "κιν. εικονιδ." ], - "desc": "Ρυθμός κίνησης εικονιδίων στο μενού (0=off | Α=αργός | Μ=μέτριος | Γ=γρήγορος)" + "desc": "Ρυθμός κίνησης εικονιδίων στο μενού (Α=αργός | Μ=μέτριος | Γ=γρήγορος)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_EN.json b/Translations/translation_EN.json index 14405cc7..03c5a093 100644 --- a/Translations/translation_EN.json +++ b/Translations/translation_EN.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Sleeping...", "SleepingTipAdvancedString": "Tip:", - "OffString": "Off", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "R", "SettingLeftChar": "L", "SettingAutoChar": "A", - "SettingOffChar": "O", "SettingSlowChar": "S", "SettingMediumChar": "M", "SettingFastChar": "F", - "SettingStartNoneChar": "O", "SettingStartSolderingChar": "S", "SettingStartSleepChar": "Z", "SettingStartSleepOffChar": "R", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", - "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -139,7 +131,7 @@ "Start-up", "behavior" ], - "desc": "O=off | S=heat to soldering temp | Z=standby at sleep temp until moved | R=standby without heating until moved" + "desc": "S=heat to soldering temp | Z=standby at sleep temp until moved | R=standby without heating until moved" }, "TempChangeShortStep": { "text2": [ @@ -167,7 +159,7 @@ "Motion", "sensitivity" ], - "desc": "0=off | 1=least sensitive | ... | 9=most sensitive" + "desc": "1=least sensitive | ... | 9=most sensitive" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Hall sensor", "sensitivity" ], - "desc": "Sensitivity to magnets (0=off | 1=least sensitive | ... | 9=most sensitive)" + "desc": "Sensitivity to magnets (1=least sensitive | ... | 9=most sensitive)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Anim.", "speed" ], - "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)" + "desc": "Pace of icon animations in menu (S=slow | M=medium | F=fast)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_ES.json b/Translations/translation_ES.json index 6b8539f2..d3997346 100644 --- a/Translations/translation_ES.json +++ b/Translations/translation_ES.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "En reposo...", "SleepingTipAdvancedString": "Punta:", - "OffString": " No", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "D", "SettingLeftChar": "I", "SettingAutoChar": "A", - "SettingOffChar": "O", "SettingSlowChar": "L", "SettingMediumChar": "M", "SettingFastChar": "R", - "SettingStartNoneChar": "N", "SettingStartSolderingChar": "S", "SettingStartSleepChar": "R", "SettingStartSleepOffChar": "F", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", - "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -139,7 +131,7 @@ "Calentar", "al enchufar" ], - "desc": "Se calienta él solo al arrancar (N=no | S=entrar en modo soldar | R=solo entrar en reposo | F=en reposo pero mantiene la punta fría)" + "desc": "Se calienta él solo al arrancar (S=entrar en modo soldar | R=solo entrar en reposo | F=en reposo pero mantiene la punta fría)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Permitir botones", "bloqueo" ], - "desc": "Al soldar, una pulsación larga en ambos botones los bloquea (D=desactivar | B=sólo potenciar | F=bloqueo total)." + "desc": "Al soldar, una pulsación larga en ambos botones los bloquea (B=sólo potenciar | F=bloqueo total)." }, "MotionSensitivity": { "text2": [ "Detección de", "movimiento" ], - "desc": "Tiempo de reacción al agarrar (0=no | 1=menos sensible | ... | 9=más sensible)" + "desc": "Tiempo de reacción al agarrar (1=menos sensible | ... | 9=más sensible)" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Hall Eff", "Sensibilidad" ], - "desc": "Sensibilidad del sensor de efecto Hall en la detección de reposo (0=no | 1=menos sensible | ... | 9=más sensible)" + "desc": "Sensibilidad del sensor de efecto Hall en la detección de reposo (1=menos sensible | ... | 9=más sensible)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Anim.", "velocidad" ], - "desc": "Velocidad de las animaciones de los iconos en el menú (O=off | L=low | M=medium | R=high)" + "desc": "Velocidad de las animaciones de los iconos en el menú (L=low | M=medium | R=high)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_FI.json b/Translations/translation_FI.json index 57ec7664..ffecaab8 100644 --- a/Translations/translation_FI.json +++ b/Translations/translation_FI.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Lepotila...", "SleepingTipAdvancedString": "Kärki:", - "OffString": "Off", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "O", "SettingLeftChar": "V", "SettingAutoChar": "A", - "SettingOffChar": "P", "SettingSlowChar": "A", "SettingMediumChar": "M", "SettingFastChar": "S", - "SettingStartNoneChar": "E", "SettingStartSolderingChar": "J", "SettingStartSleepChar": "L", "SettingStartSleepOffChar": "H", - "SettingSensitivityOff": "P", - "SettingSensitivityLow": "A", - "SettingSensitivityMedium": "K", - "SettingSensitivityHigh": "S", - "SettingLockDisableChar": "P", "SettingLockBoostChar": "V", "SettingLockFullChar": "K" }, @@ -139,7 +131,7 @@ "Autom.", "käynnistys" ], - "desc": "Käynnistää virrat kytkettäessä juotostilan automaattisesti. (E=Ei käytössä | J=juotostila | L=Lepotila | H=Lepotila huoneenlämpö)" + "desc": "Käynnistää virrat kytkettäessä juotostilan automaattisesti. (J=juotostila | L=Lepotila | H=Lepotila huoneenlämpö)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Salli nappien", "lukitus" ], - "desc": "Kolvatessa paina molempia näppäimiä lukitaksesi ne (P=pois | V=vain tehostus | K=kaikki)" + "desc": "Kolvatessa paina molempia näppäimiä lukitaksesi ne (V=vain tehostus | K=kaikki)" }, "MotionSensitivity": { "text2": [ "Liikkeen", "herkkyys" ], - "desc": "0=pois päältä | 1=vähäinen herkkyys | ... | 9=suurin herkkyys" + "desc": "1=vähäinen herkkyys | ... | 9=suurin herkkyys" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Hall-", "herk." ], - "desc": "Hall-efektianturin herkkyys lepotilan tunnistuksessa (0=pois päältä | 1=vähäinen herkkyys | ... | 9=suurin herkkyys)" + "desc": "Hall-efektianturin herkkyys lepotilan tunnistuksessa ( 1=vähäinen herkkyys | ... | 9=suurin herkkyys)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Animaation", "nopeus" ], - "desc": "Animaatioiden nopeus valikossa (P=pois | A=alhainen | K=keskiverto | S=suuri)" + "desc": "Animaatioiden nopeus valikossa (A=alhainen | K=keskiverto | S=suuri)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_FR.json b/Translations/translation_FR.json index 51841fef..e7f3781a 100644 --- a/Translations/translation_FR.json +++ b/Translations/translation_FR.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "En veille...", "SleepingTipAdvancedString": "Panne:", - "OffString": "Off", "DeviceFailedValidationWarning": "Votre appareil semble être une contrefaçon !" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "D", "SettingLeftChar": "G", "SettingAutoChar": "A", - "SettingOffChar": "D", "SettingSlowChar": "L", "SettingMediumChar": "M", "SettingFastChar": "R", - "SettingStartNoneChar": "D", "SettingStartSolderingChar": "A", "SettingStartSleepChar": "V", "SettingStartSleepOffChar": "O", - "SettingSensitivityOff": "D", - "SettingSensitivityLow": "B", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", - "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "V" }, @@ -139,7 +131,7 @@ "Chauffer au", "démarrage" ], - "desc": "D=désactivé | A=activé | V=mode veille | O=mode veille à température ambiante" + "desc": "A=activé | V=mode veille | O=mode veille à température ambiante" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Verrouiller", "les boutons" ], - "desc": "Pendant la soudure, appuyer sur les deux boutons pour les verrouiller (D=désactivé | B=boost seulement | V=verr. total)" + "desc": "Pendant la soudure, appuyer sur les deux boutons pour les verrouiller (B=boost seulement | V=verr. total)" }, "MotionSensitivity": { "text2": [ "Sensibilité", "au mouvement" ], - "desc": "0=désactivé | 1=peu sensible | ... | 9=très sensible" + "desc": "1=peu sensible | ... | 9=très sensible" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Sensibilité", "capteur effet hall" ], - "desc": "Sensibilité du capteur à effet Hall pour la mise en veille (0=désactivé | 1=peu sensible | ... | 9=très sensible)" + "desc": "Sensibilité du capteur à effet Hall pour la mise en veille (1=peu sensible | ... | 9=très sensible)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Vitesse", "anim. icônes" ], - "desc": "Vitesse des animations des icônes dans le menu (D=désactivé | L=lente | M=moyenne | R=rapide)" + "desc": "Vitesse des animations des icônes dans le menu (L=lente | M=moyenne | R=rapide)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_HR.json b/Translations/translation_HR.json index 413cc867..e8faf7f3 100644 --- a/Translations/translation_HR.json +++ b/Translations/translation_HR.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzz ", "SleepingAdvancedString": "SPAVANJE...", "SleepingTipAdvancedString": "Vrh: ", - "OffString": "Off", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "D", "SettingLeftChar": "L", "SettingAutoChar": "A", - "SettingOffChar": "O", "SettingSlowChar": "S", "SettingMediumChar": "M", "SettingFastChar": "B", - "SettingStartNoneChar": "I", "SettingStartSolderingChar": "L", "SettingStartSleepChar": "R", "SettingStartSleepOffChar": "S", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", - "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -139,7 +131,7 @@ "Auto", "start" ], - "desc": "Ako je aktivno, lemilica po uključivanju napajanja odmah počinje grijati. (I=isključeno | L=lemljenje | R=rezervni | S=rezervni sobna temperatura)" + "desc": "Ako je aktivno, lemilica po uključivanju napajanja odmah počinje grijati. (L=lemljenje | R=rezervni | S=rezervni sobna temperatura)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Allow locking", "buttons" ], - "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)" + "desc": "While soldering, hold down both buttons to toggle locking them (B=boost mode only | F=full locking)" }, "MotionSensitivity": { "text2": [ "Osjetljivost", "pokreta" ], - "desc": "Osjetljivost prepoznavanja pokreta. (0=Ugašeno | 1=Najmanje osjetljivo | ... | 9=Najosjetljivije)" + "desc": "Osjetljivost prepoznavanja pokreta. (1=Najmanje osjetljivo | ... | 9=Najosjetljivije)" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Hall sensor", "sensitivity" ], - "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=Ugašeno | 1=Najmanje osjetljivo | ... | 9=Najosjetljivije)" + "desc": "Sensitivity of the Hall effect sensor to detect sleep (1=Najmanje osjetljivo | ... | 9=Najosjetljivije)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Anim.", "speed" ], - "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | B=fast)" + "desc": "Pace of icon animations in menu (S=slow | M=medium | B=fast)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_HU.json b/Translations/translation_HU.json index b067537e..62537a7c 100644 --- a/Translations/translation_HU.json +++ b/Translations/translation_HU.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Alvás...", "SleepingTipAdvancedString": "Hegy:", - "OffString": "Ki", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "J", "SettingLeftChar": "B", "SettingAutoChar": "A", - "SettingOffChar": "0", "SettingSlowChar": "L", "SettingMediumChar": "K", "SettingFastChar": "Gy", - "SettingStartNoneChar": "K", "SettingStartSolderingChar": "F", "SettingStartSleepChar": "A", "SettingStartSleepOffChar": "Sz", - "SettingSensitivityOff": "0", - "SettingSensitivityLow": "A", - "SettingSensitivityMedium": "K", - "SettingSensitivityHigh": "M", - "SettingLockDisableChar": "K", "SettingLockBoostChar": "B", "SettingLockFullChar": "T" }, @@ -139,7 +131,7 @@ "Automatikus", "indítás" ], - "desc": "Bekapcsolás után automatikusan lépjen forrasztás módba (K=ki | F=forrasztás | A=alvó mód | Sz=szobahőmérséklet)" + "desc": "Bekapcsolás után automatikusan lépjen forrasztás módba (F=forrasztás | A=alvó mód | Sz=szobahőmérséklet)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Lezárás", "engedélyezés" ], - "desc": "Forrasztás közben mindkét gombot hosszan lenyomva lezárja a kezelést (K=ki | B=csak \"boost\" módban | T=teljes lezárás)" + "desc": "Forrasztás közben mindkét gombot hosszan lenyomva lezárja a kezelést (B=csak \"boost\" módban | T=teljes lezárás)" }, "MotionSensitivity": { "text2": [ "Mozgás", "érzékenység" ], - "desc": "Mozgás érzékenység beállítása (0=kikapcsolva | 1=legkevésbé érzékeny | ... | 9=legérzékenyebb)" + "desc": "Mozgás érzékenység beállítása (1=legkevésbé érzékeny | ... | 9=legérzékenyebb)" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Alvásérzékelő", "érzékenység" ], - "desc": "Alvásérzékelő gyorsulásmérő érzékenysége (0=kikapcsolva | 1=legkevésbé érzékeny | ... | 9=legérzékenyebb)" + "desc": "Alvásérzékelő gyorsulásmérő érzékenysége (1=legkevésbé érzékeny | ... | 9=legérzékenyebb)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Animáció", "sebessége" ], - "desc": "Menüikonok animációjának sebessége (0=ki | L=lassú | K=közepes | Gy=gyors)" + "desc": "Menüikonok animációjának sebessége (L=lassú | K=közepes | Gy=gyors)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_IT.json b/Translations/translation_IT.json index 362ded6e..071702e5 100644 --- a/Translations/translation_IT.json +++ b/Translations/translation_IT.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzz ", "SleepingAdvancedString": "Riposo", "SleepingTipAdvancedString": "Punta:", - "OffString": "OFF", "DeviceFailedValidationWarning": "È probabile che il dispositivo in uso sia contraffatto!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "D", "SettingLeftChar": "S", "SettingAutoChar": "A", - "SettingOffChar": "O", "SettingSlowChar": "L", "SettingMediumChar": "M", "SettingFastChar": "V", - "SettingStartNoneChar": "D", "SettingStartSolderingChar": "S", "SettingStartSleepChar": "R", "SettingStartSleepOffChar": "A", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "B", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "A", - "SettingLockDisableChar": "D", "SettingLockBoostChar": "T", "SettingLockFullChar": "C" }, @@ -139,7 +131,7 @@ "Avvio", "automatico" ], - "desc": "Attiva automaticamente il saldatore quando viene alimentato [D: disattiva; S: saldatura; R: riposo; A: temperatura ambiente]" + "desc": "Attiva automaticamente il saldatore quando viene alimentato [S: saldatura; R: riposo; A: temperatura ambiente]" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Blocco", "tasti" ], - "desc": "Blocca i tasti durante la modalità Saldatura; tieni premuto entrambi per bloccare o sbloccare [D: disattiva; T: consenti Turbo; C: blocco completo]" + "desc": "Blocca i tasti durante la modalità Saldatura; tieni premuto entrambi per bloccare o sbloccare [T: consenti Turbo; C: blocco completo]" }, "MotionSensitivity": { "text2": [ "Sensibilità", "al movimento" ], - "desc": "Imposta la sensibilità al movimento per uscire dalla modalità Riposo [0: nessuna; 1: minima; 9: massima]" + "desc": "Imposta la sensibilità al movimento per uscire dalla modalità Riposo [1: minima; 9: massima]" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Sensore", "Hall" ], - "desc": "Regola la sensibilità del sensore ad effetto Hall per entrare in modalità Riposo [0: nessuna; 1: minima; 9: massima]" + "desc": "Regola la sensibilità del sensore ad effetto Hall per entrare in modalità Riposo [1: minima; 9: massima]" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Velocità", "animazioni" ], - "desc": "Imposta la velocità di riproduzione delle animazioni del menù principale [O: OFF; L: lenta; M: media; V: veloce]" + "desc": "Imposta la velocità di riproduzione delle animazioni del menù principale [L: lenta; M: media; V: veloce]" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_JA_JP.json b/Translations/translation_JA_JP.json index d436af80..9b4346fd 100755 --- a/Translations/translation_JA_JP.json +++ b/Translations/translation_JA_JP.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Sleeping...", "SleepingTipAdvancedString": "Tip:", - "OffString": "オフ", "DeviceFailedValidationWarning": "このデバイスはおそらく偽造品です" }, "messagesWarn": { @@ -30,19 +29,12 @@ "SettingRightChar": "右", "SettingLeftChar": "左", "SettingAutoChar": "自", - "SettingOffChar": "×", "SettingSlowChar": "遅", "SettingMediumChar": "中", "SettingFastChar": "速", - "SettingStartNoneChar": "×", "SettingStartSolderingChar": "熱", "SettingStartSleepChar": "待", "SettingStartSleepOffChar": "室", - "SettingSensitivityOff": "×", - "SettingSensitivityLow": "低", - "SettingSensitivityMedium": "中", - "SettingSensitivityHigh": "高", - "SettingLockDisableChar": "×", "SettingLockBoostChar": "ブ", "SettingLockFullChar": "全" }, @@ -94,7 +86,7 @@ }, "AutoStart": { "text2": "自動加熱", - "desc": "電源投入時に自動的に加熱する <×=オフ | 熱=半田付けモード | 待=スタンバイモード | 室=室温スタンバイモード>" + "desc": "電源投入時に自動的に加熱する <熱=半田付けモード | 待=スタンバイモード | 室=室温スタンバイモード>" }, "TempChangeShortStep": { "text2": "温度変化 短", @@ -106,11 +98,11 @@ }, "LockingMode": { "text2": "ボタンロック", - "desc": "半田付けモード時に両方のボタンを長押しし、ボタンロックする <×=オフ | ブ=ブーストのみ許可 | 全=すべてをロック>" + "desc": "半田付けモード時に両方のボタンを長押しし、ボタンロックする <ブ=ブーストのみ許可 | 全=すべてをロック>" }, "MotionSensitivity": { "text2": "動きの感度", - "desc": "0=オフ | 1=最低感度 | ... | 9=最高感度" + "desc": "1=最低感度 | ... | 9=最高感度" }, "SleepTemperature": { "text2": "待機温度", @@ -126,7 +118,7 @@ }, "HallEffSensitivity": { "text2": "磁界感度", - "desc": "スタンバイモードに入るのに使用される磁場センサーの感度 <0=オフ | 1=最低感度 | ... | 9=最高感度>" + "desc": "スタンバイモードに入るのに使用される磁場センサーの感度 <1=最低感度 | ... | 9=最高感度>" }, "TemperatureUnit": { "text2": "温度単位", @@ -150,7 +142,7 @@ }, "AnimSpeed": { "text2": "動画の速度", - "desc": "メニューアイコンのアニメーションの速さ <×=再生しない | 遅=低速 | 中=中速 | 速=高速>" + "desc": "メニューアイコンのアニメーションの速さ <遅=低速 | 中=中速 | 速=高速>" }, "AnimLoop": { "text2": "動画をループ", diff --git a/Translations/translation_LT.json b/Translations/translation_LT.json index 04ac9ed8..65cace55 100644 --- a/Translations/translation_LT.json +++ b/Translations/translation_LT.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Miegu...", "SleepingTipAdvancedString": "Antg:", - "OffString": "Išj", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "D", "SettingLeftChar": "K", "SettingAutoChar": "A", - "SettingOffChar": "I", "SettingSlowChar": "L", "SettingMediumChar": "V", "SettingFastChar": "G", - "SettingStartNoneChar": "N", "SettingStartSolderingChar": "T", "SettingStartSleepChar": "M", "SettingStartSleepOffChar": "K", - "SettingSensitivityOff": "I", - "SettingSensitivityLow": "Ž", - "SettingSensitivityMedium": "V", - "SettingSensitivityHigh": "A", - "SettingLockDisableChar": "I", "SettingLockBoostChar": "T", "SettingLockFullChar": "V" }, @@ -139,7 +131,7 @@ "Automatinis", "paleidimas" ], - "desc": "Ar pradėti kaitininti iš karto įjungus lituoklį (N=Ne | T=Taip | M=Miegas | K=Miegoti kambario temperatūroje)" + "desc": "Ar pradėti kaitininti iš karto įjungus lituoklį (T=Taip | M=Miegas | K=Miegoti kambario temperatūroje)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Mygtukų", "užraktas" ], - "desc": "Lituodami, ilgai paspauskite abu mygtukus, kad juos užrakintumėte (I=Išjungta | T=leidžiamas tik Turbo režimas | V=Visiškas užrakinimas)" + "desc": "Lituodami, ilgai paspauskite abu mygtukus, kad juos užrakintumėte (T=leidžiamas tik Turbo režimas | V=Visiškas užrakinimas)" }, "MotionSensitivity": { "text2": [ "Judesio", "jautrumas" ], - "desc": "Judesio jautrumas (0=Išjungta | 1=Mažiausias | ... | 9=Didžiausias)" + "desc": "Judesio jautrumas (1=Mažiausias | ... | 9=Didžiausias)" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Holo", "jutiklis" ], - "desc": "Holo jutiklio jautrumas nustatant miegą (0=Išjungta | 1=Mažiausias | ... | 9=Didžiausias)" + "desc": "Holo jutiklio jautrumas nustatant miegą (1=Mažiausias | ... | 9=Didžiausias)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Animacijų", "greitis" ], - "desc": "Paveiksliukų animacijų greitis meniu punktuose (I=Išjungtas | L=Lėtas | V=Vidutinis | G=Greitas)" + "desc": "Paveiksliukų animacijų greitis meniu punktuose (L=Lėtas | V=Vidutinis | G=Greitas)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_NB.json b/Translations/translation_NB.json index 43b3010e..ca1e1901 100644 --- a/Translations/translation_NB.json +++ b/Translations/translation_NB.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Dvale...", "SleepingTipAdvancedString": "Spiss:", - "OffString": "Av", "DeviceFailedValidationWarning": "Enheten din er sannsynligvis en forfalskning!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "H", "SettingLeftChar": "V", "SettingAutoChar": "A", - "SettingOffChar": "O", "SettingSlowChar": "S", "SettingMediumChar": "M", "SettingFastChar": "F", - "SettingStartNoneChar": "I", "SettingStartSolderingChar": "L", "SettingStartSleepChar": "D", "SettingStartSleepOffChar": "R", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", - "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -139,7 +131,7 @@ "AStart", "" ], - "desc": "Start automatisk med lodding når strøm kobles til. (I=Inaktiv | L=Lodding | D=Dvale | R=Dvale romtemperatur)" + "desc": "Start automatisk med lodding når strøm kobles til. (L=Lodding | D=Dvale | R=Dvale romtemperatur)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Tillat å låse", "knapper" ], - "desc": "Mens du lodder, hold nede begge knapper for å bytte mellom låsemodus (D=deaktiver | B=kun boost | F=full lås)" + "desc": "Mens du lodder, hold nede begge knapper for å bytte mellom låsemodus (B=kun boost | F=full lås)" }, "MotionSensitivity": { "text2": [ "BSensr", "" ], - "desc": "Bevegelsesfølsomhet (0=Inaktiv | 1=Minst følsom | ... | 9=Mest følsom)" + "desc": "Bevegelsesfølsomhet (1=Minst følsom | ... | 9=Mest følsom)" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Hall-sensor", "følsomhet" ], - "desc": "Sensitiviteten til Hall-effekt-sensoren for å detektere inaktivitet (0=Inaktiv | 1=Minst følsom | ... | 9=Mest følsom)" + "desc": "Sensitiviteten til Hall-effekt-sensoren for å detektere inaktivitet (1=Minst følsom | ... | 9=Mest følsom)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Anim.", "hastighet" ], - "desc": "Hastigheten til animasjonene i menyen (O=off | S=slow | M=medium | F=fast)" + "desc": "Hastigheten til animasjonene i menyen (S=slow | M=medium | F=fast)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_NL.json b/Translations/translation_NL.json index db38745d..bc340706 100644 --- a/Translations/translation_NL.json +++ b/Translations/translation_NL.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Slaapstand...", "SleepingTipAdvancedString": "Punt:", - "OffString": "Uit", "DeviceFailedValidationWarning": "Jouw toestel is wellicht een namaak-versie!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "R", "SettingLeftChar": "L", "SettingAutoChar": "A", - "SettingOffChar": "U", "SettingSlowChar": "L", "SettingMediumChar": "G", "SettingFastChar": "S", - "SettingStartNoneChar": "U", "SettingStartSolderingChar": "G", "SettingStartSleepChar": "S", "SettingStartSleepOffChar": "B", - "SettingSensitivityOff": "U", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "G", - "SettingSensitivityHigh": "H", - "SettingLockDisableChar": "U", "SettingLockBoostChar": "B", "SettingLockFullChar": "V" }, @@ -139,7 +131,7 @@ "Opstart", "gedrag" ], - "desc": "Gedrag bij opstarten (U=Uit | G=Gebruiks-temperatuur | S=Slaapstand-temperatuur tot beweging | B=Uit tot beweging)" + "desc": "Gedrag bij opstarten (G=Gebruiks-temperatuur | S=Slaapstand-temperatuur tot beweging | B=Uit tot beweging)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Knopblokkering", "inschakelen" ], - "desc": "Tijdens solderen lang op beide knoppen drukken blokkeert de knoppen (U=Uit | B=Alleen boost mode | V=Volledig blokkeren)" + "desc": "Tijdens solderen lang op beide knoppen drukken blokkeert de knoppen (B=Alleen boost mode | V=Volledig blokkeren)" }, "MotionSensitivity": { "text2": [ "Bewegings-", "gevoeligheid" ], - "desc": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)" + "desc": "Bewegingsgevoeligheid (1=minst gevoelig | ... | 9=meest gevoelig)" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Hall sensor", "gevoeligheid" ], - "desc": "Gevoeligheid van de Hall effect sensor om naar slaapmodus te gaan (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)" + "desc": "Gevoeligheid van de Hall effect sensor om naar slaapmodus te gaan (1=minst gevoelig | ... | 9=meest gevoelig)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Animatie", "snelheid" ], - "desc": "Tempo van de icoon animaties in het hoofdmenu (U=uit | L=langzaam | G=gemiddeld | S=snel)" + "desc": "Tempo van de icoon animaties in het hoofdmenu (L=langzaam | G=gemiddeld | S=snel)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_NL_BE.json b/Translations/translation_NL_BE.json index 8201db73..4853cea6 100644 --- a/Translations/translation_NL_BE.json +++ b/Translations/translation_NL_BE.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzz ", "SleepingAdvancedString": "Slaapstand...", "SleepingTipAdvancedString": "Punt:", - "OffString": "Uit", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "R", "SettingLeftChar": "L", "SettingAutoChar": "A", - "SettingOffChar": "O", "SettingSlowChar": "T", "SettingMediumChar": "M", "SettingFastChar": "S", - "SettingStartNoneChar": "F", "SettingStartSolderingChar": "T", "SettingStartSleepChar": "S", "SettingStartSleepOffChar": "K", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", - "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -139,7 +131,7 @@ "Auto", "start" ], - "desc": "Breng de soldeerbout op temperatuur bij het opstarten. (F=Uit | T=Soldeertemperatuur | S=Slaapstand-temperatuur | K=Slaapstand kamertemperatuur)" + "desc": "Breng de soldeerbout op temperatuur bij het opstarten. ( T=Soldeertemperatuur | S=Slaapstand-temperatuur | K=Slaapstand kamertemperatuur)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Allow locking", "buttons" ], - "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)" + "desc": "While soldering, hold down both buttons to toggle locking them (B=boost mode only | F=full locking)" }, "MotionSensitivity": { "text2": [ "Bewegings-", "gevoeligheid" ], - "desc": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)" + "desc": "Bewegingsgevoeligheid (1=minst gevoelig | ... | 9=meest gevoelig)" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Hall sensor", "sensitivity" ], - "desc": "Sensitivity to magnets (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)" + "desc": "Sensitivity to magnets (1=minst gevoelig | ... | 9=meest gevoelig)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Anim.", "speed" ], - "desc": "Pace of icon animations in menu (O=off | T=slow | M=medium | S=fast)" + "desc": "Pace of icon animations in menu (T=slow | M=medium | S=fast)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_PL.json b/Translations/translation_PL.json index 745abb19..26321dd2 100644 --- a/Translations/translation_PL.json +++ b/Translations/translation_PL.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzz!", "SleepingAdvancedString": "Tr. uśpienia", "SleepingTipAdvancedString": "Grot:", - "OffString": "Wył", "DeviceFailedValidationWarning": "Twoje urządzenie jest najprawdopodobniej podróbką!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "P", "SettingLeftChar": "L", "SettingAutoChar": "A", - "SettingOffChar": "O", "SettingSlowChar": "W", "SettingMediumChar": "M", "SettingFastChar": "S", - "SettingStartNoneChar": "B", "SettingStartSolderingChar": "T", "SettingStartSleepChar": "Z", "SettingStartSleepOffChar": "O", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "N", - "SettingSensitivityMedium": "Ś", - "SettingSensitivityHigh": "W", - "SettingLockDisableChar": "W", "SettingLockBoostChar": "B", "SettingLockFullChar": "P" }, @@ -139,7 +131,7 @@ "Aut. uruch.", "tr. lutowania" ], - "desc": "Automatyczne uruchamianie trybu lutowania po włączeniu zasilania. (B: wyłączone | T: lutowanie | Z: uśpienie | O: uśpienie w temp. pokojowej)" + "desc": "Automatyczne uruchamianie trybu lutowania po włączeniu zasilania. (T: lutowanie | Z: uśpienie | O: uśpienie w temp. pokojowej)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Blokada", "przycisków" ], - "desc": "W trybie lutowania, wciśnij oba przyciski aby je zablokować (O=Wyłączona | B=tylko Boost | P=pełna blokada)" + "desc": "W trybie lutowania, wciśnij oba przyciski aby je zablokować (B=tylko Boost | P=pełna blokada)" }, "MotionSensitivity": { "text2": [ "Czułość", "wykr. ruchu" ], - "desc": "Czułość wykrywania ruchu (0: Wyłączona | 1: Minimalna | ... | 9: Maksymalna)" + "desc": "Czułość wykrywania ruchu (1: Minimalna | ... | 9: Maksymalna)" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Czułość", "cz. Halla" ], - "desc": "Czułość czujnika Halla, używanego do przechodznia w tryb uśpienia (0: Wyłączona | 1: Minimalna | ... | 9: Maksymalna)" + "desc": "Czułość czujnika Halla, używanego do przechodznia w tryb uśpienia (1: Minimalna | ... | 9: Maksymalna)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Prędkosć", "animacji" ], - "desc": "Prędkość animacji ikon w menu (O: wył. | W: mała | M: średnia | S: duża)" + "desc": "Prędkość animacji ikon w menu (W: mała | M: średnia | S: duża)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_PT.json b/Translations/translation_PT.json index e4cee4be..d7d7c7ea 100644 --- a/Translations/translation_PT.json +++ b/Translations/translation_PT.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Repouso...", "SleepingTipAdvancedString": "Ponta:", - "OffString": "Off", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "D", "SettingLeftChar": "C", "SettingAutoChar": "A", - "SettingOffChar": "O", "SettingSlowChar": "S", "SettingMediumChar": "M", "SettingFastChar": "F", - "SettingStartNoneChar": "D", "SettingStartSolderingChar": "S", "SettingStartSleepChar": "H", "SettingStartSleepOffChar": "A", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", - "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -139,7 +131,7 @@ "Partida", "automática" ], - "desc": "Aquece a ponta automaticamente ao ligar (D=desligar | S=soldagem | H=hibernar | A=hibernar temp. ambiente)" + "desc": "Aquece a ponta automaticamente ao ligar (S=soldagem | H=hibernar | A=hibernar temp. ambiente)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Allow locking", "buttons" ], - "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)" + "desc": "While soldering, hold down both buttons to toggle locking them (B=boost mode only | F=full locking)" }, "MotionSensitivity": { "text2": [ "Sensibilidade", "movimento" ], - "desc": "Sensibilidade ao movimento (0=Desligado | 1=Menor | ... | 9=Maior)" + "desc": "Sensibilidade ao movimento (1=Menor | ... | 9=Maior)" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Hall sensor", "sensitivity" ], - "desc": "Sensitivity to magnets (0=Desligado | 1=Menor | ... | 9=Maior)" + "desc": "Sensitivity to magnets (1=Menor | ... | 9=Maior)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Anim.", "speed" ], - "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)" + "desc": "Pace of icon animations in menu (S=slow | M=medium | F=fast)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_RO.json b/Translations/translation_RO.json index 6deb9dda..4e295111 100644 --- a/Translations/translation_RO.json +++ b/Translations/translation_RO.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Adormit...", "SleepingTipAdvancedString": "Tip:", - "OffString": "Nu", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "D", "SettingLeftChar": "S", "SettingAutoChar": "A", - "SettingOffChar": "O", "SettingSlowChar": "Î", "SettingMediumChar": "M", "SettingFastChar": "R", - "SettingStartNoneChar": "O", "SettingStartSolderingChar": "S", "SettingStartSleepChar": "Z", "SettingStartSleepOffChar": "R", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", - "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -139,7 +131,7 @@ "Auto", "start" ], - "desc": "Start letcon în modul de lipire la pornire (O=oprit | S=lipire | Z=repaus | R=repaus la temperatura camerei)" + "desc": "Start letcon în modul de lipire la pornire (S=lipire | Z=repaus | R=repaus la temperatura camerei)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Blocare", "butoane" ], - "desc": "Când lipiti, apăsati lung ambele butoane, pentru a le bloca (D=dezactivare | B=numai \"modul boost\" | F=blocare completă)" + "desc": "Când lipiti, apăsati lung ambele butoane, pentru a le bloca (B=numai \"modul boost\" | F=blocare completă)" }, "MotionSensitivity": { "text2": [ "Sensibilitate", "la miscare" ], - "desc": "Sensibilitate senzor miscare (0=oprit | 1=putin sensibil | ... | 9=cel mai sensibil)" + "desc": "Sensibilitate senzor miscare (1=putin sensibil | ... | 9=cel mai sensibil)" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Sensibilitate", "senzor Hall" ], - "desc": "Sensibilitate senzor cu efect Hall pentru a detecta repausul (0=oprit | 1=putin sensibil | ... | 9=cel mai sensibil)" + "desc": "Sensibilitate senzor cu efect Hall pentru a detecta repausul (1=putin sensibil | ... | 9=cel mai sensibil)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Animatii", "viteză" ], - "desc": "Ritmul animatiilor pictogramei din meniu (O=oprit | Î=încet | M=mediu | R=rapid)" + "desc": "Ritmul animatiilor pictogramei din meniu (Î=încet | M=mediu | R=rapid)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_RU.json b/Translations/translation_RU.json index 3e56af03..e9095008 100644 --- a/Translations/translation_RU.json +++ b/Translations/translation_RU.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Ожидание...", "SleepingTipAdvancedString": "Жало:", - "OffString": "Вык", "DeviceFailedValidationWarning": "Скорее всего, это устройство подделка!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "П", "SettingLeftChar": "Л", "SettingAutoChar": "А", - "SettingOffChar": "О", "SettingSlowChar": "М", "SettingMediumChar": "С", "SettingFastChar": "Б", - "SettingStartNoneChar": "В", "SettingStartSolderingChar": "П", "SettingStartSleepChar": "О", "SettingStartSleepOffChar": "К", - "SettingSensitivityOff": "О", - "SettingSensitivityLow": "Н", - "SettingSensitivityMedium": "С", - "SettingSensitivityHigh": "В", - "SettingLockDisableChar": "О", "SettingLockBoostChar": "Т", "SettingLockFullChar": "П" }, @@ -139,7 +131,7 @@ "Авто", "старт" ], - "desc": "Режим, в котором запускается паяльник при подаче питания (В=Выкл. | П=Пайка | О=Ожидание | К=Ожидание при комн. темп.)" + "desc": "Режим, в котором запускается паяльник при подаче питания (П=Пайка | О=Ожидание | К=Ожидание при комн. темп.)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Разрешить", "блок. кнопок" ], - "desc": "При работе длинное нажатие обеих кнопок блокирует их (О=Отключено | Т=Только турбо | П=Полная блокировка)" + "desc": "При работе длинное нажатие обеих кнопок блокирует их (Т=Только турбо | П=Полная блокировка)" }, "MotionSensitivity": { "text2": [ "Чувствительн.", "акселерометра" ], - "desc": "Чувствительность акселерометра (0=Выкл. | 1=Мин. | ... | 9=Макс.)" + "desc": "Чувствительность акселерометра (1=Мин. | ... | 9=Макс.)" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Датчик", "Холла" ], - "desc": "Чувствительность датчика Холла к переходу в спящий режим (0=Выкл. | 1=Мин. | ... | 9=Макс.)" + "desc": "Чувствительность датчика Холла к переходу в спящий режим (1=Мин. | ... | 9=Макс.)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Скорость", "анимации" ], - "desc": "Скорость анимации иконок в главном меню (Милисекунды) (О=Отключено | Н=Низкий | С=Средний | В=Высокий)" + "desc": "Скорость анимации иконок в главном меню (Милисекунды) (Н=Низкий | С=Средний | В=Высокий)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_SK.json b/Translations/translation_SK.json index ad6bfd7d..8e0048b7 100644 --- a/Translations/translation_SK.json +++ b/Translations/translation_SK.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Chrr", "SleepingAdvancedString": "Pokojový režim.", "SleepingTipAdvancedString": "Hrot:", - "OffString": "Vyp", "DeviceFailedValidationWarning": "Vaše zariadenie je pravdepodobne falzifikát!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "P", "SettingLeftChar": "L", "SettingAutoChar": "A", - "SettingOffChar": "Z", "SettingSlowChar": "P", "SettingMediumChar": "S", "SettingFastChar": "R", - "SettingStartNoneChar": "V", "SettingStartSolderingChar": "Z", "SettingStartSleepChar": "S", "SettingStartSleepOffChar": "I", - "SettingSensitivityOff": "Z", - "SettingSensitivityLow": "N", - "SettingSensitivityMedium": "S", - "SettingSensitivityHigh": "V", - "SettingLockDisableChar": "Z", "SettingLockBoostChar": "B", "SettingLockFullChar": "P" }, @@ -139,7 +131,7 @@ "Automatické", "spustenie" ], - "desc": "Pri štarte spustiť režim spájkovania (V=Vyp | Z=Spájkovanie | S=Spanok | I=Spanok izbová teplota)" + "desc": "Pri štarte spustiť režim spájkovania (Z=Spájkovanie | S=Spanok | I=Spanok izbová teplota)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Povoliť zámok", "tlačidiel" ], - "desc": "Zamknutie tlačidiel - dlhé stlačenie oboch naraz počas spájkovania (Z=Zakázať | B=Okrem boost | P=Plné zamknutie)" + "desc": "Zamknutie tlačidiel - dlhé stlačenie oboch naraz počas spájkovania (B=Okrem boost | P=Plné zamknutie)" }, "MotionSensitivity": { "text2": [ "Citlivosť", "pohybu" ], - "desc": "Citlivosť detekcie pohybu (0=Vyp | 1=Min | ... | 9=Max)" + "desc": "Citlivosť detekcie pohybu (1=Min | ... | 9=Max)" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Citliv.", "Hall" ], - "desc": "Citlivosť Hallovho senzora pre detekciu spánku (0=Vyp | 1=Min | ... | 9=Max)" + "desc": "Citlivosť Hallovho senzora pre detekciu spánku (1=Min | ... | 9=Max)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Rýchlosť", "animácií" ], - "desc": "Rýchlosť animácií ikoniek v menu (O=off | P=pomaly | S=stredne | R=rýchlo)" + "desc": "Rýchlosť animácií ikoniek v menu (P=pomaly | S=stredne | R=rýchlo)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_SL.json b/Translations/translation_SL.json index 3f259a56..0da2158f 100644 --- a/Translations/translation_SL.json +++ b/Translations/translation_SL.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Spim...", "SleepingTipAdvancedString": "Konica", - "OffString": "Off", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "D", "SettingLeftChar": "L", "SettingAutoChar": "S", - "SettingOffChar": "U", "SettingSlowChar": "P", "SettingMediumChar": "M", "SettingFastChar": "H", - "SettingStartNoneChar": "U", "SettingStartSolderingChar": "S", "SettingStartSleepChar": "Z", "SettingStartSleepOffChar": "V", - "SettingSensitivityOff": "U", - "SettingSensitivityLow": "N", - "SettingSensitivityMedium": "S", - "SettingSensitivityHigh": "V", - "SettingLockDisableChar": "O", "SettingLockBoostChar": "L", "SettingLockFullChar": "P" }, @@ -139,7 +131,7 @@ "Samodejni", "zagon" ], - "desc": "Samodejno gretje konice ob vklopu (U=ugasnjeno | S=spajkanje | Z=spanje | V=spanje na sobni temperaturi)" + "desc": "Samodejno gretje konice ob vklopu (S=spajkanje | Z=spanje | V=spanje na sobni temperaturi)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Omogoči", "zaklep gumbov" ], - "desc": "Za zaklep med spajkanjem drži oba gumba (O=onemogoči | L=le pospešeno | P=polno)" + "desc": "Za zaklep med spajkanjem drži oba gumba (L=le pospešeno | P=polno)" }, "MotionSensitivity": { "text2": [ "Občutljivost", "premikanja" ], - "desc": "0=izklopljeno | 1=najmanjša | ... | 9=največja" + "desc": "1=najmanjša | ... | 9=največja" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Občut.", "Hall son" ], - "desc": "Občutljivost Hallove sonde za zaznavanje spanja (0=izklopljeno | 1=najmanjša | ... | 9=največja)" + "desc": "Občutljivost Hallove sonde za zaznavanje spanja (1=najmanjša | ... | 9=največja)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Anim.", "speed" ], - "desc": "Pace of icon animations in menu (O=off | P=slow | M=medium | H=fast)" + "desc": "Pace of icon animations in menu (P=slow | M=medium | H=fast)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_SR_CYRL.json b/Translations/translation_SR_CYRL.json index c268f8c2..d6914fdb 100644 --- a/Translations/translation_SR_CYRL.json +++ b/Translations/translation_SR_CYRL.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Сан", "SleepingAdvancedString": "Спавање...", "SleepingTipAdvancedString": "Врх:", - "OffString": "Иск", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "Д", "SettingLeftChar": "Л", "SettingAutoChar": "А", - "SettingOffChar": "O", "SettingSlowChar": "С", "SettingMediumChar": "M", "SettingFastChar": "Б", - "SettingStartNoneChar": "И", "SettingStartSolderingChar": "Л", "SettingStartSleepChar": "С", "SettingStartSleepOffChar": "X", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", - "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -139,7 +131,7 @@ "Врући", "старт" ], - "desc": "Лемилица одмах по покретању прелази у режим лемљења и греје се. (И=искључити | Л=лемљење | С=спавати | X=спавати собна температура)" + "desc": "Лемилица одмах по покретању прелази у режим лемљења и греје се. (Л=лемљење | С=спавати | X=спавати собна температура)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Allow locking", "buttons" ], - "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)" + "desc": "While soldering, hold down both buttons to toggle locking them (B=boost mode only | F=full locking)" }, "MotionSensitivity": { "text2": [ "Осетљивост", "на покрет" ], - "desc": "Осетљивост сензора покрета. (0=искључено | 1=најмање осетљиво | ... | 9=најосетљивије)" + "desc": "Осетљивост сензора покрета. (1=најмање осетљиво | ... | 9=најосетљивије)" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Hall sensor", "sensitivity" ], - "desc": "Sensitivity to magnets (0=искључено | 1=најмање осетљиво | ... | 9=најосетљивије)" + "desc": "Sensitivity to magnets (1=најмање осетљиво | ... | 9=најосетљивије)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Anim.", "speed" ], - "desc": "Pace of icon animations in menu (O=off | С=slow | M=medium | Б=fast)" + "desc": "Pace of icon animations in menu (С=slow | M=medium | Б=fast)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_SR_LATN.json b/Translations/translation_SR_LATN.json index 6416e085..8fa787af 100644 --- a/Translations/translation_SR_LATN.json +++ b/Translations/translation_SR_LATN.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzz", "SleepingAdvancedString": "Spavanje...", "SleepingTipAdvancedString": "Vrh:", - "OffString": "Isk", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "D", "SettingLeftChar": "L", "SettingAutoChar": "A", - "SettingOffChar": "O", "SettingSlowChar": "S", "SettingMediumChar": "M", "SettingFastChar": "B", - "SettingStartNoneChar": "I", "SettingStartSolderingChar": "L", "SettingStartSleepChar": "S", "SettingStartSleepOffChar": "X", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", - "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -139,7 +131,7 @@ "Vrući", "start" ], - "desc": "Lemilica odmah po pokretanju prelazi u režim lemljenja i greje se. (I=isključiti | L=lemljenje | S=spavati | X=spavati sobna temperatura)" + "desc": "Lemilica odmah po pokretanju prelazi u režim lemljenja i greje se. (L=lemljenje | S=spavati | X=spavati sobna temperatura)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Allow locking", "buttons" ], - "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)" + "desc": "While soldering, hold down both buttons to toggle locking them (B=boost mode only | F=full locking)" }, "MotionSensitivity": { "text2": [ "Osetljivost", "na pokret" ], - "desc": "Osetljivost senzora pokreta. (0=isključeno | 1=najmanje osetljivo | ... | 9=najosetljivije)" + "desc": "Osetljivost senzora pokreta. (1=najmanje osetljivo | ... | 9=najosetljivije)" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Hall sensor", "sensitivity" ], - "desc": "Sensitivity to magnets (0=isključeno | 1=najmanje osetljivo | ... | 9=najosetljivije)" + "desc": "Sensitivity to magnets (1=najmanje osetljivo | ... | 9=najosetljivije)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Anim.", "speed" ], - "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | B=fast)" + "desc": "Pace of icon animations in menu (S=slow | M=medium | B=fast)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_SV.json b/Translations/translation_SV.json index 6680841a..be20c422 100644 --- a/Translations/translation_SV.json +++ b/Translations/translation_SV.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Viloläge...", "SleepingTipAdvancedString": "Spets:", - "OffString": "Av", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "H", "SettingLeftChar": "V", "SettingAutoChar": "A", - "SettingOffChar": "A", "SettingSlowChar": "L", "SettingMediumChar": "M", "SettingFastChar": "S", - "SettingStartNoneChar": "A", "SettingStartSolderingChar": "L", "SettingStartSleepChar": "V", "SettingStartSleepOffChar": "R", - "SettingSensitivityOff": "A", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", - "SettingLockDisableChar": "A", "SettingLockBoostChar": "T", "SettingLockFullChar": "F" }, @@ -139,7 +131,7 @@ "Auto", "start" ], - "desc": "Startar automatiskt lödpennan vid uppstart. (A=Av | L=Lödning | V=Viloläge | R=Viloläge Rumstemperatur)" + "desc": "Startar automatiskt lödpennan vid uppstart. (L=Lödning | V=Viloläge | R=Viloläge Rumstemperatur)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Tillåt lås", "via knappar" ], - "desc": "Vid lödning, håll nere bägge knappar för att slå på lås (A=Av | T=Bara turbo | F=Fullt lås)" + "desc": "Vid lödning, håll nere bägge knappar för att slå på lås (T=Bara turbo | F=Fullt lås)" }, "MotionSensitivity": { "text2": [ "Rörelse-", "känslighet" ], - "desc": "Rörelsekänslighet (0=Av | 1=minst känslig | ... | 9=mest känslig)" + "desc": "Rörelsekänslighet (1=minst känslig | ... | 9=mest känslig)" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Sensor-", "känslght" ], - "desc": "Känslighet för halleffekt-sensorn för viloläges-detektering (0=Av | 1=minst känslig | ... | 9=mest känslig)" + "desc": "Känslighet för halleffekt-sensorn för viloläges-detektering (1=minst känslig | ... | 9=mest känslig)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Anim.-", "hastighet" ], - "desc": "Animationshastighet för ikoner i menyer (A=av | L=långsam | M=medel | S=snabb)" + "desc": "Animationshastighet för ikoner i menyer (L=långsam | M=medel | S=snabb)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_TR.json b/Translations/translation_TR.json index 0a63c7dd..d084792a 100644 --- a/Translations/translation_TR.json +++ b/Translations/translation_TR.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Bekleme Modu ...", "SleepingTipAdvancedString": "Uç:", - "OffString": "Kapalı", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "R", "SettingLeftChar": "L", "SettingAutoChar": "O", - "SettingOffChar": "K", "SettingSlowChar": "Y", "SettingMediumChar": "O", "SettingFastChar": "H", - "SettingStartNoneChar": "K", "SettingStartSolderingChar": "L", "SettingStartSleepChar": "U", "SettingStartSleepOffChar": "S", - "SettingSensitivityOff": "K", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "O", - "SettingSensitivityHigh": "H", - "SettingLockDisableChar": "K", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -139,7 +131,7 @@ "OTOBAŞ", "" ], - "desc": "Güç verildiğinde otomatik olarak lehimleme modunda başlat. (K=Kapalı | L=Lehimleme Modu | U=Uyku Modu | S=Uyku Modu Oda Sıcaklığı)" + "desc": "Güç verildiğinde otomatik olarak lehimleme modunda başlat. (L=Lehimleme Modu | U=Uyku Modu | S=Uyku Modu Oda Sıcaklığı)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Allow locking", "buttons" ], - "desc": "While soldering, hold down both buttons to toggle locking them (K=Kapalı | B=boost mode only | F=full locking)" + "desc": "While soldering, hold down both buttons to toggle locking them (B=boost mode only | F=full locking)" }, "MotionSensitivity": { "text2": [ "HARHAS", "" ], - "desc": "Hareket Hassasiyeti (0=Kapalı | 1=En az duyarlı | ... | 9=En duyarlı)" + "desc": "Hareket Hassasiyeti (1=En az duyarlı | ... | 9=En duyarlı)" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Hall sensor", "sensitivity" ], - "desc": "Sensitivity to magnets (0=Kapalı | 1=En az duyarlı | ... | 9=En duyarlı)" + "desc": "Sensitivity to magnets (1=En az duyarlı | ... | 9=En duyarlı)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Anim.", "speed" ], - "desc": "Pace of icon animations in menu (K=Kapalı | Y=Yavaş | O=Orta | H=Hızlı)" + "desc": "Pace of icon animations in menu (Y=Yavaş | O=Orta | H=Hızlı)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_UK.json b/Translations/translation_UK.json index fc9f297f..98513b2e 100644 --- a/Translations/translation_UK.json +++ b/Translations/translation_UK.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "ZzZzz", "SleepingAdvancedString": "Очікування...", "SleepingTipAdvancedString": "Жало:", - "OffString": "Вимк", "DeviceFailedValidationWarning": "Вірогідно ваш пристрій підробний!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "П", "SettingLeftChar": "Л", "SettingAutoChar": "A", - "SettingOffChar": "B", "SettingSlowChar": "Н", "SettingMediumChar": "M", "SettingFastChar": "М", - "SettingStartNoneChar": "В", "SettingStartSolderingChar": "П", "SettingStartSleepChar": "О", "SettingStartSleepOffChar": "К", - "SettingSensitivityOff": "В", - "SettingSensitivityLow": "Н", - "SettingSensitivityMedium": "С", - "SettingSensitivityHigh": "М", - "SettingLockDisableChar": "В", "SettingLockBoostChar": "Т", "SettingLockFullChar": "П" }, @@ -139,7 +131,7 @@ "Гарячий", "старт" ], - "desc": "Режим в якому запускається паяльник при ввімкненні (В=Вимк. | П=Пайка | О=Очікування | К=Очікування при кімн. темп.)" + "desc": "Режим в якому запускається паяльник при ввімкненні (П=Пайка | О=Очікування | К=Очікування при кімн. темп.)" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Дозволити", "блок. кнопок" ], - "desc": "Під час пайки тривале натискання обох кнопок заблокує їх (В=Вимк | Т=Тільки турбо | П=Повне)" + "desc": "Під час пайки тривале натискання обох кнопок заблокує їх (Т=Тільки турбо | П=Повне)" }, "MotionSensitivity": { "text2": [ "Чутливість", "сенсору руху" ], - "desc": "Акселерометр (0=Вимк. | 1=мін. чутливості | ... | 9=макс. чутливості)" + "desc": "Акселерометр (1=мін. чутливості | ... | 9=макс. чутливості)" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Чутливість", "Ефекту Холла" ], - "desc": "Чутливість датчика ефекту Холла при виявленні сну (0=Вимк. | 1=мін. чутливості | ... | 9=макс. чутливості)" + "desc": "Чутливість датчика ефекту Холла при виявленні сну (1=мін. чутливості | ... | 9=макс. чутливості)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Швидкість", "анімації" ], - "desc": "Швидкість анімації іконок у головному меню (Мілісекунди) (В=Вимк | Н=Низькa | С=Середня | М=Макс)" + "desc": "Швидкість анімації іконок у головному меню (Мілісекунди) (Н=Низькa | С=Середня | М=Макс)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_VI.json b/Translations/translation_VI.json index 67bf683f..18f1f830 100644 --- a/Translations/translation_VI.json +++ b/Translations/translation_VI.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Đang ngu...", "SleepingTipAdvancedString": "Meo:", - "OffString": "Tat", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -45,19 +44,12 @@ "SettingRightChar": "R", "SettingLeftChar": "L", "SettingAutoChar": "A", - "SettingOffChar": "O", "SettingSlowChar": "S", "SettingMediumChar": "M", "SettingFastChar": "F", - "SettingStartNoneChar": "O", "SettingStartSolderingChar": "S", "SettingStartSleepChar": "Z", "SettingStartSleepOffChar": "R", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", - "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -139,7 +131,7 @@ "Nhiet đo", "đang tăng" ], - "desc": "- O=tat | S=nhiet đo hàn | Z=cho o nhiet đo ngu đen khi cu đong | R=cho mà không gia nhiet đen khi cu đong" + "desc": "S=nhiet đo hàn | Z=cho o nhiet đo ngu đen khi cu đong | R=cho mà không gia nhiet đen khi cu đong" }, "TempChangeShortStep": { "text2": [ @@ -160,14 +152,14 @@ "Cho phép khóa", "các nút" ], - "desc": "Trong khi hàn, giu ca 2 nút đe khóa(D=tat | B=chi che đo tăng cuong | F=khóa hoàn toàn)" + "desc": "Trong khi hàn, giu ca 2 nút đe khóa (B=chi che đo tăng cuong | F=khóa hoàn toàn)" }, "MotionSensitivity": { "text2": [ "Cam bien", "cu đong" ], - "desc": "- 0=tat | 1=đo nhay thap nhat| ... | 9=đo nhay cao nhat" + "desc": "1=đo nhay thap nhat| ... | 9=đo nhay cao nhat" }, "SleepTemperature": { "text2": [ @@ -195,7 +187,7 @@ "Hall", "đo nhay" ], - "desc": "Đo nhay cam bien Hall đe phát hien che đo ngu (0=tat | 1=ít nhay nhat |...| 9=nhay nhat)" + "desc": "Đo nhay cam bien Hall đe phát hien che đo ngu (1=ít nhay nhat |...| 9=nhay nhat)" }, "TemperatureUnit": { "text2": [ @@ -237,7 +229,7 @@ "Toc đo", "hoat anh" ], - "desc": "-Toc đo cua hoat anh menu (O=tat | S=cham | M=trung bình | F=nhanh)" + "desc": "-Toc đo cua hoat anh menu (S=cham | M=trung bình | F=nhanh)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_YUE_HK.json b/Translations/translation_YUE_HK.json index 8a343953..d5ff5172 100644 --- a/Translations/translation_YUE_HK.json +++ b/Translations/translation_YUE_HK.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Sleeping...", "SleepingTipAdvancedString": "Tip:", - "OffString": "關", "DeviceFailedValidationWarning": "依支焫雞好有可能係冒牌貨！" }, "messagesWarn": { @@ -30,19 +29,12 @@ "SettingRightChar": "右", "SettingLeftChar": "左", "SettingAutoChar": "自", - "SettingOffChar": "關", "SettingSlowChar": "慢", "SettingMediumChar": "中", "SettingFastChar": "快", - "SettingStartNoneChar": "無", "SettingStartSolderingChar": "焊", "SettingStartSleepChar": "待", "SettingStartSleepOffChar": "室", - "SettingSensitivityOff": "關", - "SettingSensitivityLow": "低", - "SettingSensitivityMedium": "中", - "SettingSensitivityHigh": "高", - "SettingLockDisableChar": "無", "SettingLockBoostChar": "增", "SettingLockFullChar": "全" }, @@ -91,7 +83,7 @@ }, "AutoStart": { "text2": "自動啓用", - "desc": "開機時自動啓用 <無=停用 | 焊=焊接模式 | 待=待機模式 | 室=室温待機>" + "desc": "開機時自動啓用 <焊=焊接模式 | 待=待機模式 | 室=室温待機>" }, "TempChangeShortStep": { "text2": "温度調整 短", @@ -103,11 +95,11 @@ }, "LockingMode": { "text2": "撳掣鎖定", - "desc": "喺焊接模式時，同時長撳兩粒掣啓用撳掣鎖定 <無=停用 | 增=淨係容許增熱模式 | 全=鎖定全部>" + "desc": "喺焊接模式時，同時長撳兩粒掣啓用撳掣鎖定 < 增=淨係容許增熱模式 | 全=鎖定全部>" }, "MotionSensitivity": { "text2": "動作敏感度", - "desc": "0=停用 | 1=最低敏感度 | ... | 9=最高敏感度" + "desc": "1=最低敏感度 | ... | 9=最高敏感度" }, "SleepTemperature": { "text2": "待機温度", @@ -123,7 +115,7 @@ }, "HallEffSensitivity": { "text2": "磁場敏感度", - "desc": "磁場感應器用嚟啓動待機模式嘅敏感度 <0=停用 | 1=最低敏感度 | ... | 9=最高敏感度>" + "desc": "磁場感應器用嚟啓動待機模式嘅敏感度 <1=最低敏感度 | ... | 9=最高敏感度>" }, "TemperatureUnit": { "text2": "温度單位", @@ -147,7 +139,7 @@ }, "AnimSpeed": { "text2": "動畫速度", - "desc": "功能表圖示動畫嘅速度 <關=不顯示動畫 | 慢=慢速 | 中=中速 | 快=快速>" + "desc": "功能表圖示動畫嘅速度 <慢=慢速 | 中=中速 | 快=快速>" }, "AnimLoop": { "text2": "動畫循環", diff --git a/Translations/translation_ZH_CN.json b/Translations/translation_ZH_CN.json index a005fa84..209cc84a 100644 --- a/Translations/translation_ZH_CN.json +++ b/Translations/translation_ZH_CN.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Zzzz...", "SleepingTipAdvancedString": "--->", - "OffString": "关", "DeviceFailedValidationWarning": "这支电烙铁很有可能是冒牌货！" }, "messagesWarn": { @@ -30,19 +29,12 @@ "SettingRightChar": "右", "SettingLeftChar": "左", "SettingAutoChar": "自", - "SettingOffChar": "关", "SettingSlowChar": "慢", "SettingMediumChar": "中", "SettingFastChar": "快", - "SettingStartNoneChar": "无", "SettingStartSolderingChar": "焊", "SettingStartSleepChar": "待", "SettingStartSleepOffChar": "室", - "SettingSensitivityOff": "关", - "SettingSensitivityLow": "低", - "SettingSensitivityMedium": "中", - "SettingSensitivityHigh": "高", - "SettingLockDisableChar": "无", "SettingLockBoostChar": "增", "SettingLockFullChar": "全" }, @@ -91,7 +83,7 @@ }, "AutoStart": { "text2": "自动启动", - "desc": "开机时自动启动 <无=禁用 | 焊=焊接模式 | 待=待机模式 | 室=室温待机>" + "desc": "开机时自动启动 <焊=焊接模式 | 待=待机模式 | 室=室温待机>" }, "TempChangeShortStep": { "text2": "短按温度调整", @@ -103,11 +95,11 @@ }, "LockingMode": { "text2": "按键锁定", - "desc": "焊接模式时，同时长按两个按键启用按键锁定 <无=禁用 | 增=只容许增热模式 | 全=完全锁定>" + "desc": "焊接模式时，同时长按两个按键启用按键锁定 <增=只容许增热模式 | 全=完全锁定>" }, "MotionSensitivity": { "text2": "动作灵敏度", - "desc": "0=禁用 | 1=最低灵敏度 | ... | 9=最高灵敏度" + "desc": "1=最低灵敏度 | ... | 9=最高灵敏度" }, "SleepTemperature": { "text2": "待机温度", @@ -123,7 +115,7 @@ }, "HallEffSensitivity": { "text2": "磁场灵敏度", - "desc": "霍尔效应传感器用作启动待机模式的灵敏度 <0=禁用 | 1=最低灵敏度 | ... | 9=最高灵敏度>" + "desc": "霍尔效应传感器用作启动待机模式的灵敏度 <1=最低灵敏度 | ... | 9=最高灵敏度>" }, "TemperatureUnit": { "text2": "温度单位", @@ -147,7 +139,7 @@ }, "AnimSpeed": { "text2": "动画速度", - "desc": "主菜单中功能图标动画的播放速度 <关=不显示动画 | 慢=慢速 | 中=中速 | 快=快速>" + "desc": "主菜单中功能图标动画的播放速度 <慢=慢速 | 中=中速 | 快=快速>" }, "AnimLoop": { "text2": "动画循环", diff --git a/Translations/translation_ZH_TW.json b/Translations/translation_ZH_TW.json index 1f2ab233..6ed6fd67 100644 --- a/Translations/translation_ZH_TW.json +++ b/Translations/translation_ZH_TW.json @@ -12,7 +12,6 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Sleeping...", "SleepingTipAdvancedString": "Tip:", - "OffString": "關", "DeviceFailedValidationWarning": "這支電烙鐵很有可能是冒牌貨！" }, "messagesWarn": { @@ -30,19 +29,12 @@ "SettingRightChar": "右", "SettingLeftChar": "左", "SettingAutoChar": "自", - "SettingOffChar": "關", "SettingSlowChar": "慢", "SettingMediumChar": "中", "SettingFastChar": "快", - "SettingStartNoneChar": "無", "SettingStartSolderingChar": "焊", "SettingStartSleepChar": "待", "SettingStartSleepOffChar": "室", - "SettingSensitivityOff": "關", - "SettingSensitivityLow": "低", - "SettingSensitivityMedium": "中", - "SettingSensitivityHigh": "高", - "SettingLockDisableChar": "無", "SettingLockBoostChar": "增", "SettingLockFullChar": "全" }, @@ -91,7 +83,7 @@ }, "AutoStart": { "text2": "自動啟用", - "desc": "開機時自動啟用 <無=停用 | 焊=焊接模式 | 待=待機模式 | 室=室溫待機>" + "desc": "開機時自動啟用 <焊=焊接模式 | 待=待機模式 | 室=室溫待機>" }, "TempChangeShortStep": { "text2": "溫度調整 短", @@ -103,11 +95,11 @@ }, "LockingMode": { "text2": "按鍵鎖定", - "desc": "於焊接模式時，同時長按兩個按鍵啟用按鍵鎖定 <無=停用 | 增=只容許增熱模式 | 全=鎖定全部>" + "desc": "於焊接模式時，同時長按兩個按鍵啟用按鍵鎖定 <增=只容許增熱模式 | 全=鎖定全部>" }, "MotionSensitivity": { "text2": "動作敏感度", - "desc": "0=停用 | 1=最低敏感度 | ... | 9=最高敏感度" + "desc": "1=最低敏感度 | ... | 9=最高敏感度" }, "SleepTemperature": { "text2": "待機溫度", @@ -123,7 +115,7 @@ }, "HallEffSensitivity": { "text2": "磁場敏感度", - "desc": "磁場感應器用作啟動待機模式的敏感度 <0=停用 | 1=最低敏感度 | ... | 9=最高敏感度>" + "desc": "磁場感應器用作啟動待機模式的敏感度 <1=最低敏感度 | ... | 9=最高敏感度>" }, "TemperatureUnit": { "text2": "溫標", @@ -147,7 +139,7 @@ }, "AnimSpeed": { "text2": "動畫速度", - "desc": "功能表圖示動畫的速度 <關=不顯示動畫 | 慢=慢速 | 中=中速 | 快=快速>" + "desc": "功能表圖示動畫的速度 <慢=慢速 | 中=中速 | 快=快速>" }, "AnimLoop": { "text2": "動畫循環", diff --git a/Translations/translations_def.js b/Translations/translations_def.js index c9f89af1..a7625320 100644 --- a/Translations/translations_def.js +++ b/Translations/translations_def.js @@ -43,11 +43,6 @@ var def = /// "maxLen": 6, "description": "The prefix text shown before tip temperature when the unit is sleeping with advanced view on." }, - { - "id": "OffString", - "maxLen": 3, - "description": "Shown when a setting is turned off." - }, { "id": "DeviceFailedValidationWarning", "default": "Device may be\ncounterfeit", @@ -121,11 +116,6 @@ var def = /// "len": 1, "description": "Shown when a setting is set to a medium value i.e. animation speed" }, - { - "id": "SettingOffChar", - "len": 1, - "description": "Shown when a setting is turned off" - }, { "id": "SettingStartSolderingChar", "len": 1, @@ -141,37 +131,6 @@ var def = /// "len": 1, "description": "Shown when the auto start state is set to go to an off state, but on movement wake into soldering mode." }, - { - "id": "SettingStartNoneChar", - "len": 1, - "description": "Shown when autostart state is to do nothing and go to a normal boot" - }, - { - "id": "SettingSensitivityOff", - "len": 1, - "description": "Shown when a sensitivity (hall effect sensor) is disabled. Turning off the sensor." - }, - { - "id": "SettingSensitivityLow", - "len": 1, - "description": "Shown when a sensitivity (hall effect) is not very sensitive" - }, - { - "id": "SettingSensitivityMedium", - "len": 1, - "description": "Shown when a sensitivity (hall effect) is average sensitive" - }, - { - "id": "SettingSensitivityHigh", - "len": 1, - "description": "Shown when a sensitivity (hall effect) is highly sensitive" - }, - { - "id": "SettingLockDisableChar", - "len": 1, - "default": "D", - "description": "Shown when locking mode is turned off." - }, { "id": "SettingLockBoostChar", "len": 1, From f4bcfed7bdae74a3bfa9aeb75c6e66523720249f Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Wed, 14 Dec 2022 11:35:49 +0100 Subject: [PATCH 20/35] Add files via upload --- Translations/translation_BE.json | 20 +++++++++---- Translations/translation_BG.json | 18 ++++++++---- Translations/translation_CS.json | 18 ++++++++---- Translations/translation_DA.json | 18 ++++++++---- Translations/translation_DE.json | 18 ++++++++---- Translations/translation_EL.json | 18 ++++++++---- Translations/translation_EN.json | 16 ++++++++--- Translations/translation_ES.json | 18 ++++++++---- Translations/translation_FI.json | 18 ++++++++---- Translations/translation_FR.json | 18 ++++++++---- Translations/translation_HR.json | 18 ++++++++---- Translations/translation_HU.json | 18 ++++++++---- Translations/translation_IT.json | 18 ++++++++---- Translations/translation_JA_JP.json | 18 ++++++++---- Translations/translation_LT.json | 18 ++++++++---- Translations/translation_NB.json | 18 ++++++++---- Translations/translation_NL.json | 18 ++++++++---- Translations/translation_NL_BE.json | 18 ++++++++---- Translations/translation_PL.json | 18 ++++++++---- Translations/translation_PT.json | 18 ++++++++---- Translations/translation_RO.json | 18 ++++++++---- Translations/translation_RU.json | 18 ++++++++---- Translations/translation_SK.json | 18 ++++++++---- Translations/translation_SL.json | 18 ++++++++---- Translations/translation_SR_CYRL.json | 18 ++++++++---- Translations/translation_SR_LATN.json | 18 ++++++++---- Translations/translation_SV.json | 18 ++++++++---- Translations/translation_TR.json | 18 ++++++++---- Translations/translation_UK.json | 18 ++++++++---- Translations/translation_VI.json | 18 ++++++++---- Translations/translation_YUE_HK.json | 18 ++++++++---- Translations/translation_ZH_CN.json | 18 ++++++++---- Translations/translation_ZH_TW.json | 18 ++++++++---- Translations/translations_def.js | 41 +++++++++++++++++++++++++++ 34 files changed, 470 insertions(+), 165 deletions(-) diff --git a/Translations/translation_BE.json b/Translations/translation_BE.json index d11b7d45..67b9ae2a 100644 --- a/Translations/translation_BE.json +++ b/Translations/translation_BE.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Чаканне...", "SleepingTipAdvancedString": "Джала:", + "OffString": "Выкл.", "DeviceFailedValidationWarning": "Ваша прылада, хутчэй за ўсё, падробка!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "П", "SettingLeftChar": "Л", "SettingAutoChar": "А", + "SettingOffChar": "O", "SettingSlowChar": "М", "SettingMediumChar": "С", "SettingFastChar": "Х", + "SettingStartNoneChar": "В", "SettingStartSolderingChar": "П", "SettingStartSleepChar": "Ч", "SettingStartSleepOffChar": "К", + "SettingSensitivityOff": "А", + "SettingSensitivityLow": "Н", + "SettingSensitivityMedium": "С", + "SettingSensitivityHigh": "В", + "SettingLockDisableChar": "А", "SettingLockBoostChar": "Т", "SettingLockFullChar": "П" }, @@ -117,7 +125,7 @@ "PD", "прыпынак" ], - "desc": "Час чакання ўзгаднення PD з крокам 100 мс для сумяшчальнасці з некаторымі зараднымі зараднымі прыладамі QC" + "desc": "Час чакання ўзгаднення PD з крокам 100 мс для сумяшчальнасці з некаторымі зараднымі зараднымі прыладамі QC (0: адключана)" }, "BoostTemperature": { "text2": [ @@ -131,7 +139,7 @@ "Аўта", "старт" ], - "desc": "Рэжым, у якім запускаецца паяльнік пры падачы сілкавання (П=Пайка | Ч=Чаканне | К=Чаканне пры комн. тэмп.)" + "desc": "Рэжым, у якім запускаецца паяльнік пры падачы сілкавання (В=Выкл. | П=Пайка | Ч=Чаканне | К=Чаканне пры комн. тэмп.)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Дазволіць", "блок. кнопак" ], - "desc": "Пры рабоце падоўжаны націск дзьвух кнопак блакуе іх (Т=Толькі турба | П=Поўная блакіроўка)" + "desc": "Пры рабоце падоўжаны націск дзьвух кнопак блакуе іх (А=Адключана | Т=Толькі турба | П=Поўная блакіроўка)" }, "MotionSensitivity": { "text2": [ "Адчувальнасць", "акселерометра" ], - "desc": "Адчувальнасць акселерометра (1=Мін. | ... | 9=Макс.)" + "desc": "Адчувальнасць акселерометра (0=Выкл. | 1=Мін. | ... | 9=Макс.)" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Эфект Хола", "адчувальнасць" ], - "desc": "Узровень адчувальнасці датчыка хола ў рэжыме сну (1=Мін. | ... | 9=Макс.)" + "desc": "Узровень адчувальнасці датчыка хола ў рэжыме сну (0=Выкл. | 1=Мін. | ... | 9=Макс.)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Хуткасць", "анімацыі" ], - "desc": "Хуткасць анімацыі гузікаў у галоўным меню (Мілісекунды) (Н=Нізкая | С=Сярэдняя | В=Высокая)" + "desc": "Хуткасць анімацыі гузікаў у галоўным меню (Мілісекунды) (А=Адключана | Н=Нізкая | С=Сярэдняя | В=Высокая)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_BG.json b/Translations/translation_BG.json index d6a946d5..e6715866 100644 --- a/Translations/translation_BG.json +++ b/Translations/translation_BG.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Сън", "SleepingAdvancedString": "Хър Хър Хър...", "SleepingTipAdvancedString": "Връх:", + "OffString": "Изкл.", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "R", "SettingLeftChar": "L", "SettingAutoChar": "A", + "SettingOffChar": "O", "SettingSlowChar": "S", "SettingMediumChar": "M", "SettingFastChar": "F", + "SettingStartNoneChar": "И", "SettingStartSolderingChar": "Р", "SettingStartSleepChar": "С", "SettingStartSleepOffChar": "П", + "SettingSensitivityOff": "O", + "SettingSensitivityLow": "L", + "SettingSensitivityMedium": "M", + "SettingSensitivityHigh": "H", + "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -131,7 +139,7 @@ "Автоматичен", "работен режим" ], - "desc": "Режим на поялника при включване на захранването. (Р=Работен | С=Сън | П=Сън температура помещение)" + "desc": "Режим на поялника при включване на захранването. (И=Изключен | Р=Работен | С=Сън | П=Сън температура помещение)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Allow locking", "buttons" ], - "desc": "While soldering, hold down both buttons to toggle locking them (B=boost mode only | F=full locking)" + "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)" }, "MotionSensitivity": { "text2": [ "Усещане", "за движение" ], - "desc": "Усещане за движение (1=Слабо | ... | 9=Силно)" + "desc": "Усещане за движение (0=Изключено | 1=Слабо | ... | 9=Силно)" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Hall sensor", "sensitivity" ], - "desc": "Sensitivity to magnets (1=Слабо | ... | 9=Силно)" + "desc": "Sensitivity to magnets (0=Изключено | 1=Слабо | ... | 9=Силно)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Anim.", "speed" ], - "desc": "Pace of icon animations in menu (S=slow | M=medium | F=fast)" + "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_CS.json b/Translations/translation_CS.json index aef4cd4b..6a7e6bf4 100644 --- a/Translations/translation_CS.json +++ b/Translations/translation_CS.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzz ", "SleepingAdvancedString": "Režim spánku...", "SleepingTipAdvancedString": "Hrot:", + "OffString": "Vyp", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "P", "SettingLeftChar": "L", "SettingAutoChar": "A", + "SettingOffChar": "D", "SettingSlowChar": "P", "SettingMediumChar": "S", "SettingFastChar": "R", + "SettingStartNoneChar": "V", "SettingStartSolderingChar": "P", "SettingStartSleepChar": "S", "SettingStartSleepOffChar": "M", + "SettingSensitivityOff": "O", + "SettingSensitivityLow": "M", + "SettingSensitivityMedium": "S", + "SettingSensitivityHigh": "V", + "SettingLockDisableChar": "Z", "SettingLockBoostChar": "B", "SettingLockFullChar": "U" }, @@ -131,7 +139,7 @@ "Chování", "při startu" ], - "desc": "P=pájecí teplota | S=spánková teplota | M=zahřát hrot po pohybu" + "desc": "V=vypnuto | P=pájecí teplota | S=spánková teplota | M=zahřát hrot po pohybu" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Povolit zamč.", "tlačítek" ], - "desc": "Při pájení podržte obě tlačítka pro jejich zamčení (B=pouze v režimu boost | U=úplné zamčení)" + "desc": "Při pájení podržte obě tlačítka pro jejich zamčení (Z=zakázáno | B=pouze v režimu boost | U=úplné zamčení)" }, "MotionSensitivity": { "text2": [ "Citlivost", "na pohyb" ], - "desc": "1=nejméně citlivé | ... | 9=nejvíce citlivé" + "desc": "0=vyp | 1=nejméně citlivé | ... | 9=nejvíce citlivé" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Citlivost", "Hall. čidla" ], - "desc": "Citlivost Hallova čidla pro detekci spánku (1=nejméně citlivé | ... | 9=nejvíce citlivé)" + "desc": "Citlivost Hallova čidla pro detekci spánku (0=vypnuto | 1=nejméně citlivé | ... | 9=nejvíce citlivé)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Anim.", "rychlost" ], - "desc": "Tempo animace ikon v menu (P=pomalu | S=středně | R=rychle)" + "desc": "Tempo animace ikon v menu (O=vypnuto | P=pomalu | S=středně | R=rychle)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_DA.json b/Translations/translation_DA.json index 1628852d..37953a92 100644 --- a/Translations/translation_DA.json +++ b/Translations/translation_DA.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Dvale...", "SleepingTipAdvancedString": "Tip:", + "OffString": "Off", "DeviceFailedValidationWarning": "Din enhed er højst sandsyneligt en Kopivare!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "H", "SettingLeftChar": "V", "SettingAutoChar": "A", + "SettingOffChar": "O", "SettingSlowChar": "S", "SettingMediumChar": "M", "SettingFastChar": "F", + "SettingStartNoneChar": "S", "SettingStartSolderingChar": "L", "SettingStartSleepChar": "D", "SettingStartSleepOffChar": "R", + "SettingSensitivityOff": "O", + "SettingSensitivityLow": "L", + "SettingSensitivityMedium": "M", + "SettingSensitivityHigh": "H", + "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -131,7 +139,7 @@ "Start-up", "Opførsel" ], - "desc": "Start automatisk med lodning når strøm sættes til. (L=Lodning | D=Dvale tilstand | R=Dvale tilstand rumtemperatur)" + "desc": "Start automatisk med lodning når strøm sættes til. (S=Slukket | L=Lodning | D=Dvale tilstand | R=Dvale tilstand rumtemperatur)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Tillad låsning", "af knapperne" ], - "desc": "Hold begge knapper nede under lodning for at låse dem (B=kun boost-tilstand | F=fuld låsning)" + "desc": "Hold begge knapper nede under lodning for at låse dem (D=deaktiver | B=kun boost-tilstand | F=fuld låsning)" }, "MotionSensitivity": { "text2": [ "Bevægelses", "følsomhed" ], - "desc": "Bevægelsesfølsomhed (1=Mindst følsom | ... | 9=Mest følsom)" + "desc": "Bevægelsesfølsomhed (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Hall sensor", "følsomhed" ], - "desc": "følsomhed overfor magneten (1=Mindst følsom | ... | 9=Mest følsom)" + "desc": "følsomhed overfor magneten (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Anim.", "Hastighed" ], - "desc": "Hastigheden for ikonanimationer i menuen (S=langsomt | M=medium | F=hurtigt)" + "desc": "Hastigheden for ikonanimationer i menuen (O=fra | S=langsomt | M=medium | F=hurtigt)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_DE.json b/Translations/translation_DE.json index b55307dd..2902ee61 100644 --- a/Translations/translation_DE.json +++ b/Translations/translation_DE.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Ruhemodus...", "SleepingTipAdvancedString": "Temp:", + "OffString": "Aus", "DeviceFailedValidationWarning": "Höchstwahrscheinlich ist das Gerät eine Fälschung!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "R", "SettingLeftChar": "L", "SettingAutoChar": "A", + "SettingOffChar": "A", "SettingSlowChar": "L", "SettingMediumChar": "M", "SettingFastChar": "S", + "SettingStartNoneChar": "A", "SettingStartSolderingChar": "L", "SettingStartSleepChar": "R", "SettingStartSleepOffChar": "K", + "SettingSensitivityOff": "A", + "SettingSensitivityLow": "N", + "SettingSensitivityMedium": "M", + "SettingSensitivityHigh": "H", + "SettingLockDisableChar": "A", "SettingLockBoostChar": "B", "SettingLockFullChar": "V" }, @@ -131,7 +139,7 @@ "Start im", "Lötmodus" ], - "desc": "Heizverhalten beim Einschalten der Spannungsversorgung (L=Lötmodus | R=Ruhemodus | K=Ruhemodus mit kalter Spitze)" + "desc": "Heizverhalten beim Einschalten der Spannungsversorgung (A=aus | L=Lötmodus | R=Ruhemodus | K=Ruhemodus mit kalter Spitze)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Tasten-", "sperre" ], - "desc": "Langes drücken beider Tasten im Lötmodus sperrt diese (B=nur Boost | V=vollständig)" + "desc": "Langes drücken beider Tasten im Lötmodus sperrt diese (A=aus | B=nur Boost | V=vollständig)" }, "MotionSensitivity": { "text2": [ "Bewegungs-", "empfindlichk." ], - "desc": "1=minimal | ... | 9=maximal" + "desc": "0=aus | 1=minimal | ... | 9=maximal" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Empfindlichkeit", "der Hall-Sonde" ], - "desc": "Empfindlichkeit der Hall-Sonde um den Ruhemodus auszulösen (1=minimal | ... | 9=maximal)" + "desc": "Empfindlichkeit der Hall-Sonde um den Ruhemodus auszulösen (0=aus | 1=minimal | ... | 9=maximal)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Anim.", "Geschw." ], - "desc": "Geschwindigkeit der Icon-Animationen im Menü (L=langsam | M=mittel | S=schnell)" + "desc": "Geschwindigkeit der Icon-Animationen im Menü (A=aus | L=langsam | M=mittel | S=schnell)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_EL.json b/Translations/translation_EL.json index 6e5e41fe..27971dab 100644 --- a/Translations/translation_EL.json +++ b/Translations/translation_EL.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Υπνος...", "SleepingTipAdvancedString": "Μύτη:", + "OffString": "Απ.", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -47,12 +48,19 @@ "SettingRightChar": "R", "SettingLeftChar": "L", "SettingAutoChar": "Α", + "SettingOffChar": "0", "SettingSlowChar": "Α", "SettingMediumChar": "Μ", "SettingFastChar": "Γ", + "SettingStartNoneChar": "0", "SettingStartSolderingChar": "Κ", "SettingStartSleepChar": "Ζ", "SettingStartSleepOffChar": "Υ", + "SettingSensitivityOff": "0", + "SettingSensitivityLow": "Χ", + "SettingSensitivityMedium": "Μ", + "SettingSensitivityHigh": "Υ", + "SettingLockDisableChar": "Α", "SettingLockBoostChar": "B", "SettingLockFullChar": "Π" }, @@ -134,7 +142,7 @@ "Ζέσταμα", "κατά την εν." ], - "desc": "Κ=θερμ. κόλλησης | Z=αναμονή σε θερμοκρασία ύπνου μέχρι την κίνηση | Υ=αναμονή χωρίς ζέσταμα μέχρι την κίνηση" + "desc": "0=off | Κ=θερμ. κόλλησης | Z=αναμονή σε θερμοκρασία ύπνου μέχρι την κίνηση | Υ=αναμονή χωρίς ζέσταμα μέχρι την κίνηση" }, "TempChangeShortStep": { "text2": [ @@ -155,14 +163,14 @@ "Κλείδωμα", "πλήκτρων" ], - "desc": "Κατά την κόλληση, κρατήστε και τα δύο πλήκτρα για κλείδωμα (B=μόνο λειτ. boost | Π=πλήρες κλείδωμα)" + "desc": "Κατά την κόλληση, κρατήστε και τα δύο πλήκτρα για κλείδωμα (A=απενεργοποίηση | B=μόνο λειτ. boost | Π=πλήρες κλείδωμα)" }, "MotionSensitivity": { "text2": [ "Ευαισθησία", "κίνησης" ], - "desc": "1=λιγότερο ευαίσθητο | ... | 9=περισσότερο ευαίσθητο" + "desc": "0=off | 1=λιγότερο ευαίσθητο | ... | 9=περισσότερο ευαίσθητο" }, "SleepTemperature": { "text2": [ @@ -190,7 +198,7 @@ "Ευαισθ. αισθ. ", "φαιν. Hall" ], - "desc": "Ευαισθησία του αισθητήρα φαινομένου Hall για εντοπισμό αδράνειας (1=λιγότερο ευαίσθητο | ... | 9=περισσότερο ευαίσθητο)" + "desc": "Ευαισθησία του αισθητήρα φαινομένου Hall για εντοπισμό αδράνειας (0=off | 1=λιγότερο ευαίσθητο | ... | 9=περισσότερο ευαίσθητο)" }, "TemperatureUnit": { "text2": [ @@ -232,7 +240,7 @@ "Ταχύτητα", "κιν. εικονιδ." ], - "desc": "Ρυθμός κίνησης εικονιδίων στο μενού (Α=αργός | Μ=μέτριος | Γ=γρήγορος)" + "desc": "Ρυθμός κίνησης εικονιδίων στο μενού (0=off | Α=αργός | Μ=μέτριος | Γ=γρήγορος)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_EN.json b/Translations/translation_EN.json index 03c5a093..14405cc7 100644 --- a/Translations/translation_EN.json +++ b/Translations/translation_EN.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Sleeping...", "SleepingTipAdvancedString": "Tip:", + "OffString": "Off", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "R", "SettingLeftChar": "L", "SettingAutoChar": "A", + "SettingOffChar": "O", "SettingSlowChar": "S", "SettingMediumChar": "M", "SettingFastChar": "F", + "SettingStartNoneChar": "O", "SettingStartSolderingChar": "S", "SettingStartSleepChar": "Z", "SettingStartSleepOffChar": "R", + "SettingSensitivityOff": "O", + "SettingSensitivityLow": "L", + "SettingSensitivityMedium": "M", + "SettingSensitivityHigh": "H", + "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -131,7 +139,7 @@ "Start-up", "behavior" ], - "desc": "S=heat to soldering temp | Z=standby at sleep temp until moved | R=standby without heating until moved" + "desc": "O=off | S=heat to soldering temp | Z=standby at sleep temp until moved | R=standby without heating until moved" }, "TempChangeShortStep": { "text2": [ @@ -159,7 +167,7 @@ "Motion", "sensitivity" ], - "desc": "1=least sensitive | ... | 9=most sensitive" + "desc": "0=off | 1=least sensitive | ... | 9=most sensitive" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Hall sensor", "sensitivity" ], - "desc": "Sensitivity to magnets (1=least sensitive | ... | 9=most sensitive)" + "desc": "Sensitivity to magnets (0=off | 1=least sensitive | ... | 9=most sensitive)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Anim.", "speed" ], - "desc": "Pace of icon animations in menu (S=slow | M=medium | F=fast)" + "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_ES.json b/Translations/translation_ES.json index d3997346..6b8539f2 100644 --- a/Translations/translation_ES.json +++ b/Translations/translation_ES.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "En reposo...", "SleepingTipAdvancedString": "Punta:", + "OffString": " No", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "D", "SettingLeftChar": "I", "SettingAutoChar": "A", + "SettingOffChar": "O", "SettingSlowChar": "L", "SettingMediumChar": "M", "SettingFastChar": "R", + "SettingStartNoneChar": "N", "SettingStartSolderingChar": "S", "SettingStartSleepChar": "R", "SettingStartSleepOffChar": "F", + "SettingSensitivityOff": "O", + "SettingSensitivityLow": "L", + "SettingSensitivityMedium": "M", + "SettingSensitivityHigh": "H", + "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -131,7 +139,7 @@ "Calentar", "al enchufar" ], - "desc": "Se calienta él solo al arrancar (S=entrar en modo soldar | R=solo entrar en reposo | F=en reposo pero mantiene la punta fría)" + "desc": "Se calienta él solo al arrancar (N=no | S=entrar en modo soldar | R=solo entrar en reposo | F=en reposo pero mantiene la punta fría)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Permitir botones", "bloqueo" ], - "desc": "Al soldar, una pulsación larga en ambos botones los bloquea (B=sólo potenciar | F=bloqueo total)." + "desc": "Al soldar, una pulsación larga en ambos botones los bloquea (D=desactivar | B=sólo potenciar | F=bloqueo total)." }, "MotionSensitivity": { "text2": [ "Detección de", "movimiento" ], - "desc": "Tiempo de reacción al agarrar (1=menos sensible | ... | 9=más sensible)" + "desc": "Tiempo de reacción al agarrar (0=no | 1=menos sensible | ... | 9=más sensible)" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Hall Eff", "Sensibilidad" ], - "desc": "Sensibilidad del sensor de efecto Hall en la detección de reposo (1=menos sensible | ... | 9=más sensible)" + "desc": "Sensibilidad del sensor de efecto Hall en la detección de reposo (0=no | 1=menos sensible | ... | 9=más sensible)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Anim.", "velocidad" ], - "desc": "Velocidad de las animaciones de los iconos en el menú (L=low | M=medium | R=high)" + "desc": "Velocidad de las animaciones de los iconos en el menú (O=off | L=low | M=medium | R=high)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_FI.json b/Translations/translation_FI.json index ffecaab8..57ec7664 100644 --- a/Translations/translation_FI.json +++ b/Translations/translation_FI.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Lepotila...", "SleepingTipAdvancedString": "Kärki:", + "OffString": "Off", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "O", "SettingLeftChar": "V", "SettingAutoChar": "A", + "SettingOffChar": "P", "SettingSlowChar": "A", "SettingMediumChar": "M", "SettingFastChar": "S", + "SettingStartNoneChar": "E", "SettingStartSolderingChar": "J", "SettingStartSleepChar": "L", "SettingStartSleepOffChar": "H", + "SettingSensitivityOff": "P", + "SettingSensitivityLow": "A", + "SettingSensitivityMedium": "K", + "SettingSensitivityHigh": "S", + "SettingLockDisableChar": "P", "SettingLockBoostChar": "V", "SettingLockFullChar": "K" }, @@ -131,7 +139,7 @@ "Autom.", "käynnistys" ], - "desc": "Käynnistää virrat kytkettäessä juotostilan automaattisesti. (J=juotostila | L=Lepotila | H=Lepotila huoneenlämpö)" + "desc": "Käynnistää virrat kytkettäessä juotostilan automaattisesti. (E=Ei käytössä | J=juotostila | L=Lepotila | H=Lepotila huoneenlämpö)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Salli nappien", "lukitus" ], - "desc": "Kolvatessa paina molempia näppäimiä lukitaksesi ne (V=vain tehostus | K=kaikki)" + "desc": "Kolvatessa paina molempia näppäimiä lukitaksesi ne (P=pois | V=vain tehostus | K=kaikki)" }, "MotionSensitivity": { "text2": [ "Liikkeen", "herkkyys" ], - "desc": "1=vähäinen herkkyys | ... | 9=suurin herkkyys" + "desc": "0=pois päältä | 1=vähäinen herkkyys | ... | 9=suurin herkkyys" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Hall-", "herk." ], - "desc": "Hall-efektianturin herkkyys lepotilan tunnistuksessa ( 1=vähäinen herkkyys | ... | 9=suurin herkkyys)" + "desc": "Hall-efektianturin herkkyys lepotilan tunnistuksessa (0=pois päältä | 1=vähäinen herkkyys | ... | 9=suurin herkkyys)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Animaation", "nopeus" ], - "desc": "Animaatioiden nopeus valikossa (A=alhainen | K=keskiverto | S=suuri)" + "desc": "Animaatioiden nopeus valikossa (P=pois | A=alhainen | K=keskiverto | S=suuri)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_FR.json b/Translations/translation_FR.json index e7f3781a..51841fef 100644 --- a/Translations/translation_FR.json +++ b/Translations/translation_FR.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "En veille...", "SleepingTipAdvancedString": "Panne:", + "OffString": "Off", "DeviceFailedValidationWarning": "Votre appareil semble être une contrefaçon !" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "D", "SettingLeftChar": "G", "SettingAutoChar": "A", + "SettingOffChar": "D", "SettingSlowChar": "L", "SettingMediumChar": "M", "SettingFastChar": "R", + "SettingStartNoneChar": "D", "SettingStartSolderingChar": "A", "SettingStartSleepChar": "V", "SettingStartSleepOffChar": "O", + "SettingSensitivityOff": "D", + "SettingSensitivityLow": "B", + "SettingSensitivityMedium": "M", + "SettingSensitivityHigh": "H", + "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "V" }, @@ -131,7 +139,7 @@ "Chauffer au", "démarrage" ], - "desc": "A=activé | V=mode veille | O=mode veille à température ambiante" + "desc": "D=désactivé | A=activé | V=mode veille | O=mode veille à température ambiante" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Verrouiller", "les boutons" ], - "desc": "Pendant la soudure, appuyer sur les deux boutons pour les verrouiller (B=boost seulement | V=verr. total)" + "desc": "Pendant la soudure, appuyer sur les deux boutons pour les verrouiller (D=désactivé | B=boost seulement | V=verr. total)" }, "MotionSensitivity": { "text2": [ "Sensibilité", "au mouvement" ], - "desc": "1=peu sensible | ... | 9=très sensible" + "desc": "0=désactivé | 1=peu sensible | ... | 9=très sensible" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Sensibilité", "capteur effet hall" ], - "desc": "Sensibilité du capteur à effet Hall pour la mise en veille (1=peu sensible | ... | 9=très sensible)" + "desc": "Sensibilité du capteur à effet Hall pour la mise en veille (0=désactivé | 1=peu sensible | ... | 9=très sensible)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Vitesse", "anim. icônes" ], - "desc": "Vitesse des animations des icônes dans le menu (L=lente | M=moyenne | R=rapide)" + "desc": "Vitesse des animations des icônes dans le menu (D=désactivé | L=lente | M=moyenne | R=rapide)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_HR.json b/Translations/translation_HR.json index e8faf7f3..413cc867 100644 --- a/Translations/translation_HR.json +++ b/Translations/translation_HR.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzz ", "SleepingAdvancedString": "SPAVANJE...", "SleepingTipAdvancedString": "Vrh: ", + "OffString": "Off", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "D", "SettingLeftChar": "L", "SettingAutoChar": "A", + "SettingOffChar": "O", "SettingSlowChar": "S", "SettingMediumChar": "M", "SettingFastChar": "B", + "SettingStartNoneChar": "I", "SettingStartSolderingChar": "L", "SettingStartSleepChar": "R", "SettingStartSleepOffChar": "S", + "SettingSensitivityOff": "O", + "SettingSensitivityLow": "L", + "SettingSensitivityMedium": "M", + "SettingSensitivityHigh": "H", + "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -131,7 +139,7 @@ "Auto", "start" ], - "desc": "Ako je aktivno, lemilica po uključivanju napajanja odmah počinje grijati. (L=lemljenje | R=rezervni | S=rezervni sobna temperatura)" + "desc": "Ako je aktivno, lemilica po uključivanju napajanja odmah počinje grijati. (I=isključeno | L=lemljenje | R=rezervni | S=rezervni sobna temperatura)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Allow locking", "buttons" ], - "desc": "While soldering, hold down both buttons to toggle locking them (B=boost mode only | F=full locking)" + "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)" }, "MotionSensitivity": { "text2": [ "Osjetljivost", "pokreta" ], - "desc": "Osjetljivost prepoznavanja pokreta. (1=Najmanje osjetljivo | ... | 9=Najosjetljivije)" + "desc": "Osjetljivost prepoznavanja pokreta. (0=Ugašeno | 1=Najmanje osjetljivo | ... | 9=Najosjetljivije)" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Hall sensor", "sensitivity" ], - "desc": "Sensitivity of the Hall effect sensor to detect sleep (1=Najmanje osjetljivo | ... | 9=Najosjetljivije)" + "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=Ugašeno | 1=Najmanje osjetljivo | ... | 9=Najosjetljivije)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Anim.", "speed" ], - "desc": "Pace of icon animations in menu (S=slow | M=medium | B=fast)" + "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | B=fast)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_HU.json b/Translations/translation_HU.json index 62537a7c..b067537e 100644 --- a/Translations/translation_HU.json +++ b/Translations/translation_HU.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Alvás...", "SleepingTipAdvancedString": "Hegy:", + "OffString": "Ki", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "J", "SettingLeftChar": "B", "SettingAutoChar": "A", + "SettingOffChar": "0", "SettingSlowChar": "L", "SettingMediumChar": "K", "SettingFastChar": "Gy", + "SettingStartNoneChar": "K", "SettingStartSolderingChar": "F", "SettingStartSleepChar": "A", "SettingStartSleepOffChar": "Sz", + "SettingSensitivityOff": "0", + "SettingSensitivityLow": "A", + "SettingSensitivityMedium": "K", + "SettingSensitivityHigh": "M", + "SettingLockDisableChar": "K", "SettingLockBoostChar": "B", "SettingLockFullChar": "T" }, @@ -131,7 +139,7 @@ "Automatikus", "indítás" ], - "desc": "Bekapcsolás után automatikusan lépjen forrasztás módba (F=forrasztás | A=alvó mód | Sz=szobahőmérséklet)" + "desc": "Bekapcsolás után automatikusan lépjen forrasztás módba (K=ki | F=forrasztás | A=alvó mód | Sz=szobahőmérséklet)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Lezárás", "engedélyezés" ], - "desc": "Forrasztás közben mindkét gombot hosszan lenyomva lezárja a kezelést (B=csak \"boost\" módban | T=teljes lezárás)" + "desc": "Forrasztás közben mindkét gombot hosszan lenyomva lezárja a kezelést (K=ki | B=csak \"boost\" módban | T=teljes lezárás)" }, "MotionSensitivity": { "text2": [ "Mozgás", "érzékenység" ], - "desc": "Mozgás érzékenység beállítása (1=legkevésbé érzékeny | ... | 9=legérzékenyebb)" + "desc": "Mozgás érzékenység beállítása (0=kikapcsolva | 1=legkevésbé érzékeny | ... | 9=legérzékenyebb)" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Alvásérzékelő", "érzékenység" ], - "desc": "Alvásérzékelő gyorsulásmérő érzékenysége (1=legkevésbé érzékeny | ... | 9=legérzékenyebb)" + "desc": "Alvásérzékelő gyorsulásmérő érzékenysége (0=kikapcsolva | 1=legkevésbé érzékeny | ... | 9=legérzékenyebb)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Animáció", "sebessége" ], - "desc": "Menüikonok animációjának sebessége (L=lassú | K=közepes | Gy=gyors)" + "desc": "Menüikonok animációjának sebessége (0=ki | L=lassú | K=közepes | Gy=gyors)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_IT.json b/Translations/translation_IT.json index 071702e5..362ded6e 100644 --- a/Translations/translation_IT.json +++ b/Translations/translation_IT.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzz ", "SleepingAdvancedString": "Riposo", "SleepingTipAdvancedString": "Punta:", + "OffString": "OFF", "DeviceFailedValidationWarning": "È probabile che il dispositivo in uso sia contraffatto!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "D", "SettingLeftChar": "S", "SettingAutoChar": "A", + "SettingOffChar": "O", "SettingSlowChar": "L", "SettingMediumChar": "M", "SettingFastChar": "V", + "SettingStartNoneChar": "D", "SettingStartSolderingChar": "S", "SettingStartSleepChar": "R", "SettingStartSleepOffChar": "A", + "SettingSensitivityOff": "O", + "SettingSensitivityLow": "B", + "SettingSensitivityMedium": "M", + "SettingSensitivityHigh": "A", + "SettingLockDisableChar": "D", "SettingLockBoostChar": "T", "SettingLockFullChar": "C" }, @@ -131,7 +139,7 @@ "Avvio", "automatico" ], - "desc": "Attiva automaticamente il saldatore quando viene alimentato [S: saldatura; R: riposo; A: temperatura ambiente]" + "desc": "Attiva automaticamente il saldatore quando viene alimentato [D: disattiva; S: saldatura; R: riposo; A: temperatura ambiente]" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Blocco", "tasti" ], - "desc": "Blocca i tasti durante la modalità Saldatura; tieni premuto entrambi per bloccare o sbloccare [T: consenti Turbo; C: blocco completo]" + "desc": "Blocca i tasti durante la modalità Saldatura; tieni premuto entrambi per bloccare o sbloccare [D: disattiva; T: consenti Turbo; C: blocco completo]" }, "MotionSensitivity": { "text2": [ "Sensibilità", "al movimento" ], - "desc": "Imposta la sensibilità al movimento per uscire dalla modalità Riposo [1: minima; 9: massima]" + "desc": "Imposta la sensibilità al movimento per uscire dalla modalità Riposo [0: nessuna; 1: minima; 9: massima]" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Sensore", "Hall" ], - "desc": "Regola la sensibilità del sensore ad effetto Hall per entrare in modalità Riposo [1: minima; 9: massima]" + "desc": "Regola la sensibilità del sensore ad effetto Hall per entrare in modalità Riposo [0: nessuna; 1: minima; 9: massima]" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Velocità", "animazioni" ], - "desc": "Imposta la velocità di riproduzione delle animazioni del menù principale [L: lenta; M: media; V: veloce]" + "desc": "Imposta la velocità di riproduzione delle animazioni del menù principale [O: OFF; L: lenta; M: media; V: veloce]" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_JA_JP.json b/Translations/translation_JA_JP.json index 9b4346fd..d436af80 100755 --- a/Translations/translation_JA_JP.json +++ b/Translations/translation_JA_JP.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Sleeping...", "SleepingTipAdvancedString": "Tip:", + "OffString": "オフ", "DeviceFailedValidationWarning": "このデバイスはおそらく偽造品です" }, "messagesWarn": { @@ -29,12 +30,19 @@ "SettingRightChar": "右", "SettingLeftChar": "左", "SettingAutoChar": "自", + "SettingOffChar": "×", "SettingSlowChar": "遅", "SettingMediumChar": "中", "SettingFastChar": "速", + "SettingStartNoneChar": "×", "SettingStartSolderingChar": "熱", "SettingStartSleepChar": "待", "SettingStartSleepOffChar": "室", + "SettingSensitivityOff": "×", + "SettingSensitivityLow": "低", + "SettingSensitivityMedium": "中", + "SettingSensitivityHigh": "高", + "SettingLockDisableChar": "×", "SettingLockBoostChar": "ブ", "SettingLockFullChar": "全" }, @@ -86,7 +94,7 @@ }, "AutoStart": { "text2": "自動加熱", - "desc": "電源投入時に自動的に加熱する <熱=半田付けモード | 待=スタンバイモード | 室=室温スタンバイモード>" + "desc": "電源投入時に自動的に加熱する <×=オフ | 熱=半田付けモード | 待=スタンバイモード | 室=室温スタンバイモード>" }, "TempChangeShortStep": { "text2": "温度変化 短", @@ -98,11 +106,11 @@ }, "LockingMode": { "text2": "ボタンロック", - "desc": "半田付けモード時に両方のボタンを長押しし、ボタンロックする <ブ=ブーストのみ許可 | 全=すべてをロック>" + "desc": "半田付けモード時に両方のボタンを長押しし、ボタンロックする <×=オフ | ブ=ブーストのみ許可 | 全=すべてをロック>" }, "MotionSensitivity": { "text2": "動きの感度", - "desc": "1=最低感度 | ... | 9=最高感度" + "desc": "0=オフ | 1=最低感度 | ... | 9=最高感度" }, "SleepTemperature": { "text2": "待機温度", @@ -118,7 +126,7 @@ }, "HallEffSensitivity": { "text2": "磁界感度", - "desc": "スタンバイモードに入るのに使用される磁場センサーの感度 <1=最低感度 | ... | 9=最高感度>" + "desc": "スタンバイモードに入るのに使用される磁場センサーの感度 <0=オフ | 1=最低感度 | ... | 9=最高感度>" }, "TemperatureUnit": { "text2": "温度単位", @@ -142,7 +150,7 @@ }, "AnimSpeed": { "text2": "動画の速度", - "desc": "メニューアイコンのアニメーションの速さ <遅=低速 | 中=中速 | 速=高速>" + "desc": "メニューアイコンのアニメーションの速さ <×=再生しない | 遅=低速 | 中=中速 | 速=高速>" }, "AnimLoop": { "text2": "動画をループ", diff --git a/Translations/translation_LT.json b/Translations/translation_LT.json index 65cace55..04ac9ed8 100644 --- a/Translations/translation_LT.json +++ b/Translations/translation_LT.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Miegu...", "SleepingTipAdvancedString": "Antg:", + "OffString": "Išj", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "D", "SettingLeftChar": "K", "SettingAutoChar": "A", + "SettingOffChar": "I", "SettingSlowChar": "L", "SettingMediumChar": "V", "SettingFastChar": "G", + "SettingStartNoneChar": "N", "SettingStartSolderingChar": "T", "SettingStartSleepChar": "M", "SettingStartSleepOffChar": "K", + "SettingSensitivityOff": "I", + "SettingSensitivityLow": "Ž", + "SettingSensitivityMedium": "V", + "SettingSensitivityHigh": "A", + "SettingLockDisableChar": "I", "SettingLockBoostChar": "T", "SettingLockFullChar": "V" }, @@ -131,7 +139,7 @@ "Automatinis", "paleidimas" ], - "desc": "Ar pradėti kaitininti iš karto įjungus lituoklį (T=Taip | M=Miegas | K=Miegoti kambario temperatūroje)" + "desc": "Ar pradėti kaitininti iš karto įjungus lituoklį (N=Ne | T=Taip | M=Miegas | K=Miegoti kambario temperatūroje)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Mygtukų", "užraktas" ], - "desc": "Lituodami, ilgai paspauskite abu mygtukus, kad juos užrakintumėte (T=leidžiamas tik Turbo režimas | V=Visiškas užrakinimas)" + "desc": "Lituodami, ilgai paspauskite abu mygtukus, kad juos užrakintumėte (I=Išjungta | T=leidžiamas tik Turbo režimas | V=Visiškas užrakinimas)" }, "MotionSensitivity": { "text2": [ "Judesio", "jautrumas" ], - "desc": "Judesio jautrumas (1=Mažiausias | ... | 9=Didžiausias)" + "desc": "Judesio jautrumas (0=Išjungta | 1=Mažiausias | ... | 9=Didžiausias)" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Holo", "jutiklis" ], - "desc": "Holo jutiklio jautrumas nustatant miegą (1=Mažiausias | ... | 9=Didžiausias)" + "desc": "Holo jutiklio jautrumas nustatant miegą (0=Išjungta | 1=Mažiausias | ... | 9=Didžiausias)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Animacijų", "greitis" ], - "desc": "Paveiksliukų animacijų greitis meniu punktuose (L=Lėtas | V=Vidutinis | G=Greitas)" + "desc": "Paveiksliukų animacijų greitis meniu punktuose (I=Išjungtas | L=Lėtas | V=Vidutinis | G=Greitas)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_NB.json b/Translations/translation_NB.json index ca1e1901..43b3010e 100644 --- a/Translations/translation_NB.json +++ b/Translations/translation_NB.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Dvale...", "SleepingTipAdvancedString": "Spiss:", + "OffString": "Av", "DeviceFailedValidationWarning": "Enheten din er sannsynligvis en forfalskning!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "H", "SettingLeftChar": "V", "SettingAutoChar": "A", + "SettingOffChar": "O", "SettingSlowChar": "S", "SettingMediumChar": "M", "SettingFastChar": "F", + "SettingStartNoneChar": "I", "SettingStartSolderingChar": "L", "SettingStartSleepChar": "D", "SettingStartSleepOffChar": "R", + "SettingSensitivityOff": "O", + "SettingSensitivityLow": "L", + "SettingSensitivityMedium": "M", + "SettingSensitivityHigh": "H", + "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -131,7 +139,7 @@ "AStart", "" ], - "desc": "Start automatisk med lodding når strøm kobles til. (L=Lodding | D=Dvale | R=Dvale romtemperatur)" + "desc": "Start automatisk med lodding når strøm kobles til. (I=Inaktiv | L=Lodding | D=Dvale | R=Dvale romtemperatur)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Tillat å låse", "knapper" ], - "desc": "Mens du lodder, hold nede begge knapper for å bytte mellom låsemodus (B=kun boost | F=full lås)" + "desc": "Mens du lodder, hold nede begge knapper for å bytte mellom låsemodus (D=deaktiver | B=kun boost | F=full lås)" }, "MotionSensitivity": { "text2": [ "BSensr", "" ], - "desc": "Bevegelsesfølsomhet (1=Minst følsom | ... | 9=Mest følsom)" + "desc": "Bevegelsesfølsomhet (0=Inaktiv | 1=Minst følsom | ... | 9=Mest følsom)" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Hall-sensor", "følsomhet" ], - "desc": "Sensitiviteten til Hall-effekt-sensoren for å detektere inaktivitet (1=Minst følsom | ... | 9=Mest følsom)" + "desc": "Sensitiviteten til Hall-effekt-sensoren for å detektere inaktivitet (0=Inaktiv | 1=Minst følsom | ... | 9=Mest følsom)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Anim.", "hastighet" ], - "desc": "Hastigheten til animasjonene i menyen (S=slow | M=medium | F=fast)" + "desc": "Hastigheten til animasjonene i menyen (O=off | S=slow | M=medium | F=fast)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_NL.json b/Translations/translation_NL.json index bc340706..db38745d 100644 --- a/Translations/translation_NL.json +++ b/Translations/translation_NL.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Slaapstand...", "SleepingTipAdvancedString": "Punt:", + "OffString": "Uit", "DeviceFailedValidationWarning": "Jouw toestel is wellicht een namaak-versie!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "R", "SettingLeftChar": "L", "SettingAutoChar": "A", + "SettingOffChar": "U", "SettingSlowChar": "L", "SettingMediumChar": "G", "SettingFastChar": "S", + "SettingStartNoneChar": "U", "SettingStartSolderingChar": "G", "SettingStartSleepChar": "S", "SettingStartSleepOffChar": "B", + "SettingSensitivityOff": "U", + "SettingSensitivityLow": "L", + "SettingSensitivityMedium": "G", + "SettingSensitivityHigh": "H", + "SettingLockDisableChar": "U", "SettingLockBoostChar": "B", "SettingLockFullChar": "V" }, @@ -131,7 +139,7 @@ "Opstart", "gedrag" ], - "desc": "Gedrag bij opstarten (G=Gebruiks-temperatuur | S=Slaapstand-temperatuur tot beweging | B=Uit tot beweging)" + "desc": "Gedrag bij opstarten (U=Uit | G=Gebruiks-temperatuur | S=Slaapstand-temperatuur tot beweging | B=Uit tot beweging)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Knopblokkering", "inschakelen" ], - "desc": "Tijdens solderen lang op beide knoppen drukken blokkeert de knoppen (B=Alleen boost mode | V=Volledig blokkeren)" + "desc": "Tijdens solderen lang op beide knoppen drukken blokkeert de knoppen (U=Uit | B=Alleen boost mode | V=Volledig blokkeren)" }, "MotionSensitivity": { "text2": [ "Bewegings-", "gevoeligheid" ], - "desc": "Bewegingsgevoeligheid (1=minst gevoelig | ... | 9=meest gevoelig)" + "desc": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Hall sensor", "gevoeligheid" ], - "desc": "Gevoeligheid van de Hall effect sensor om naar slaapmodus te gaan (1=minst gevoelig | ... | 9=meest gevoelig)" + "desc": "Gevoeligheid van de Hall effect sensor om naar slaapmodus te gaan (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Animatie", "snelheid" ], - "desc": "Tempo van de icoon animaties in het hoofdmenu (L=langzaam | G=gemiddeld | S=snel)" + "desc": "Tempo van de icoon animaties in het hoofdmenu (U=uit | L=langzaam | G=gemiddeld | S=snel)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_NL_BE.json b/Translations/translation_NL_BE.json index 4853cea6..8201db73 100644 --- a/Translations/translation_NL_BE.json +++ b/Translations/translation_NL_BE.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzz ", "SleepingAdvancedString": "Slaapstand...", "SleepingTipAdvancedString": "Punt:", + "OffString": "Uit", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "R", "SettingLeftChar": "L", "SettingAutoChar": "A", + "SettingOffChar": "O", "SettingSlowChar": "T", "SettingMediumChar": "M", "SettingFastChar": "S", + "SettingStartNoneChar": "F", "SettingStartSolderingChar": "T", "SettingStartSleepChar": "S", "SettingStartSleepOffChar": "K", + "SettingSensitivityOff": "O", + "SettingSensitivityLow": "L", + "SettingSensitivityMedium": "M", + "SettingSensitivityHigh": "H", + "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -131,7 +139,7 @@ "Auto", "start" ], - "desc": "Breng de soldeerbout op temperatuur bij het opstarten. ( T=Soldeertemperatuur | S=Slaapstand-temperatuur | K=Slaapstand kamertemperatuur)" + "desc": "Breng de soldeerbout op temperatuur bij het opstarten. (F=Uit | T=Soldeertemperatuur | S=Slaapstand-temperatuur | K=Slaapstand kamertemperatuur)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Allow locking", "buttons" ], - "desc": "While soldering, hold down both buttons to toggle locking them (B=boost mode only | F=full locking)" + "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)" }, "MotionSensitivity": { "text2": [ "Bewegings-", "gevoeligheid" ], - "desc": "Bewegingsgevoeligheid (1=minst gevoelig | ... | 9=meest gevoelig)" + "desc": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Hall sensor", "sensitivity" ], - "desc": "Sensitivity to magnets (1=minst gevoelig | ... | 9=meest gevoelig)" + "desc": "Sensitivity to magnets (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Anim.", "speed" ], - "desc": "Pace of icon animations in menu (T=slow | M=medium | S=fast)" + "desc": "Pace of icon animations in menu (O=off | T=slow | M=medium | S=fast)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_PL.json b/Translations/translation_PL.json index 26321dd2..745abb19 100644 --- a/Translations/translation_PL.json +++ b/Translations/translation_PL.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzz!", "SleepingAdvancedString": "Tr. uśpienia", "SleepingTipAdvancedString": "Grot:", + "OffString": "Wył", "DeviceFailedValidationWarning": "Twoje urządzenie jest najprawdopodobniej podróbką!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "P", "SettingLeftChar": "L", "SettingAutoChar": "A", + "SettingOffChar": "O", "SettingSlowChar": "W", "SettingMediumChar": "M", "SettingFastChar": "S", + "SettingStartNoneChar": "B", "SettingStartSolderingChar": "T", "SettingStartSleepChar": "Z", "SettingStartSleepOffChar": "O", + "SettingSensitivityOff": "O", + "SettingSensitivityLow": "N", + "SettingSensitivityMedium": "Ś", + "SettingSensitivityHigh": "W", + "SettingLockDisableChar": "W", "SettingLockBoostChar": "B", "SettingLockFullChar": "P" }, @@ -131,7 +139,7 @@ "Aut. uruch.", "tr. lutowania" ], - "desc": "Automatyczne uruchamianie trybu lutowania po włączeniu zasilania. (T: lutowanie | Z: uśpienie | O: uśpienie w temp. pokojowej)" + "desc": "Automatyczne uruchamianie trybu lutowania po włączeniu zasilania. (B: wyłączone | T: lutowanie | Z: uśpienie | O: uśpienie w temp. pokojowej)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Blokada", "przycisków" ], - "desc": "W trybie lutowania, wciśnij oba przyciski aby je zablokować (B=tylko Boost | P=pełna blokada)" + "desc": "W trybie lutowania, wciśnij oba przyciski aby je zablokować (O=Wyłączona | B=tylko Boost | P=pełna blokada)" }, "MotionSensitivity": { "text2": [ "Czułość", "wykr. ruchu" ], - "desc": "Czułość wykrywania ruchu (1: Minimalna | ... | 9: Maksymalna)" + "desc": "Czułość wykrywania ruchu (0: Wyłączona | 1: Minimalna | ... | 9: Maksymalna)" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Czułość", "cz. Halla" ], - "desc": "Czułość czujnika Halla, używanego do przechodznia w tryb uśpienia (1: Minimalna | ... | 9: Maksymalna)" + "desc": "Czułość czujnika Halla, używanego do przechodznia w tryb uśpienia (0: Wyłączona | 1: Minimalna | ... | 9: Maksymalna)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Prędkosć", "animacji" ], - "desc": "Prędkość animacji ikon w menu (W: mała | M: średnia | S: duża)" + "desc": "Prędkość animacji ikon w menu (O: wył. | W: mała | M: średnia | S: duża)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_PT.json b/Translations/translation_PT.json index d7d7c7ea..e4cee4be 100644 --- a/Translations/translation_PT.json +++ b/Translations/translation_PT.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Repouso...", "SleepingTipAdvancedString": "Ponta:", + "OffString": "Off", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "D", "SettingLeftChar": "C", "SettingAutoChar": "A", + "SettingOffChar": "O", "SettingSlowChar": "S", "SettingMediumChar": "M", "SettingFastChar": "F", + "SettingStartNoneChar": "D", "SettingStartSolderingChar": "S", "SettingStartSleepChar": "H", "SettingStartSleepOffChar": "A", + "SettingSensitivityOff": "O", + "SettingSensitivityLow": "L", + "SettingSensitivityMedium": "M", + "SettingSensitivityHigh": "H", + "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -131,7 +139,7 @@ "Partida", "automática" ], - "desc": "Aquece a ponta automaticamente ao ligar (S=soldagem | H=hibernar | A=hibernar temp. ambiente)" + "desc": "Aquece a ponta automaticamente ao ligar (D=desligar | S=soldagem | H=hibernar | A=hibernar temp. ambiente)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Allow locking", "buttons" ], - "desc": "While soldering, hold down both buttons to toggle locking them (B=boost mode only | F=full locking)" + "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)" }, "MotionSensitivity": { "text2": [ "Sensibilidade", "movimento" ], - "desc": "Sensibilidade ao movimento (1=Menor | ... | 9=Maior)" + "desc": "Sensibilidade ao movimento (0=Desligado | 1=Menor | ... | 9=Maior)" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Hall sensor", "sensitivity" ], - "desc": "Sensitivity to magnets (1=Menor | ... | 9=Maior)" + "desc": "Sensitivity to magnets (0=Desligado | 1=Menor | ... | 9=Maior)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Anim.", "speed" ], - "desc": "Pace of icon animations in menu (S=slow | M=medium | F=fast)" + "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_RO.json b/Translations/translation_RO.json index 4e295111..6deb9dda 100644 --- a/Translations/translation_RO.json +++ b/Translations/translation_RO.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Adormit...", "SleepingTipAdvancedString": "Tip:", + "OffString": "Nu", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "D", "SettingLeftChar": "S", "SettingAutoChar": "A", + "SettingOffChar": "O", "SettingSlowChar": "Î", "SettingMediumChar": "M", "SettingFastChar": "R", + "SettingStartNoneChar": "O", "SettingStartSolderingChar": "S", "SettingStartSleepChar": "Z", "SettingStartSleepOffChar": "R", + "SettingSensitivityOff": "O", + "SettingSensitivityLow": "L", + "SettingSensitivityMedium": "M", + "SettingSensitivityHigh": "H", + "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -131,7 +139,7 @@ "Auto", "start" ], - "desc": "Start letcon în modul de lipire la pornire (S=lipire | Z=repaus | R=repaus la temperatura camerei)" + "desc": "Start letcon în modul de lipire la pornire (O=oprit | S=lipire | Z=repaus | R=repaus la temperatura camerei)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Blocare", "butoane" ], - "desc": "Când lipiti, apăsati lung ambele butoane, pentru a le bloca (B=numai \"modul boost\" | F=blocare completă)" + "desc": "Când lipiti, apăsati lung ambele butoane, pentru a le bloca (D=dezactivare | B=numai \"modul boost\" | F=blocare completă)" }, "MotionSensitivity": { "text2": [ "Sensibilitate", "la miscare" ], - "desc": "Sensibilitate senzor miscare (1=putin sensibil | ... | 9=cel mai sensibil)" + "desc": "Sensibilitate senzor miscare (0=oprit | 1=putin sensibil | ... | 9=cel mai sensibil)" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Sensibilitate", "senzor Hall" ], - "desc": "Sensibilitate senzor cu efect Hall pentru a detecta repausul (1=putin sensibil | ... | 9=cel mai sensibil)" + "desc": "Sensibilitate senzor cu efect Hall pentru a detecta repausul (0=oprit | 1=putin sensibil | ... | 9=cel mai sensibil)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Animatii", "viteză" ], - "desc": "Ritmul animatiilor pictogramei din meniu (Î=încet | M=mediu | R=rapid)" + "desc": "Ritmul animatiilor pictogramei din meniu (O=oprit | Î=încet | M=mediu | R=rapid)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_RU.json b/Translations/translation_RU.json index e9095008..3e56af03 100644 --- a/Translations/translation_RU.json +++ b/Translations/translation_RU.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Ожидание...", "SleepingTipAdvancedString": "Жало:", + "OffString": "Вык", "DeviceFailedValidationWarning": "Скорее всего, это устройство подделка!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "П", "SettingLeftChar": "Л", "SettingAutoChar": "А", + "SettingOffChar": "О", "SettingSlowChar": "М", "SettingMediumChar": "С", "SettingFastChar": "Б", + "SettingStartNoneChar": "В", "SettingStartSolderingChar": "П", "SettingStartSleepChar": "О", "SettingStartSleepOffChar": "К", + "SettingSensitivityOff": "О", + "SettingSensitivityLow": "Н", + "SettingSensitivityMedium": "С", + "SettingSensitivityHigh": "В", + "SettingLockDisableChar": "О", "SettingLockBoostChar": "Т", "SettingLockFullChar": "П" }, @@ -131,7 +139,7 @@ "Авто", "старт" ], - "desc": "Режим, в котором запускается паяльник при подаче питания (П=Пайка | О=Ожидание | К=Ожидание при комн. темп.)" + "desc": "Режим, в котором запускается паяльник при подаче питания (В=Выкл. | П=Пайка | О=Ожидание | К=Ожидание при комн. темп.)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Разрешить", "блок. кнопок" ], - "desc": "При работе длинное нажатие обеих кнопок блокирует их (Т=Только турбо | П=Полная блокировка)" + "desc": "При работе длинное нажатие обеих кнопок блокирует их (О=Отключено | Т=Только турбо | П=Полная блокировка)" }, "MotionSensitivity": { "text2": [ "Чувствительн.", "акселерометра" ], - "desc": "Чувствительность акселерометра (1=Мин. | ... | 9=Макс.)" + "desc": "Чувствительность акселерометра (0=Выкл. | 1=Мин. | ... | 9=Макс.)" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Датчик", "Холла" ], - "desc": "Чувствительность датчика Холла к переходу в спящий режим (1=Мин. | ... | 9=Макс.)" + "desc": "Чувствительность датчика Холла к переходу в спящий режим (0=Выкл. | 1=Мин. | ... | 9=Макс.)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Скорость", "анимации" ], - "desc": "Скорость анимации иконок в главном меню (Милисекунды) (Н=Низкий | С=Средний | В=Высокий)" + "desc": "Скорость анимации иконок в главном меню (Милисекунды) (О=Отключено | Н=Низкий | С=Средний | В=Высокий)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_SK.json b/Translations/translation_SK.json index 8e0048b7..ad6bfd7d 100644 --- a/Translations/translation_SK.json +++ b/Translations/translation_SK.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Chrr", "SleepingAdvancedString": "Pokojový režim.", "SleepingTipAdvancedString": "Hrot:", + "OffString": "Vyp", "DeviceFailedValidationWarning": "Vaše zariadenie je pravdepodobne falzifikát!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "P", "SettingLeftChar": "L", "SettingAutoChar": "A", + "SettingOffChar": "Z", "SettingSlowChar": "P", "SettingMediumChar": "S", "SettingFastChar": "R", + "SettingStartNoneChar": "V", "SettingStartSolderingChar": "Z", "SettingStartSleepChar": "S", "SettingStartSleepOffChar": "I", + "SettingSensitivityOff": "Z", + "SettingSensitivityLow": "N", + "SettingSensitivityMedium": "S", + "SettingSensitivityHigh": "V", + "SettingLockDisableChar": "Z", "SettingLockBoostChar": "B", "SettingLockFullChar": "P" }, @@ -131,7 +139,7 @@ "Automatické", "spustenie" ], - "desc": "Pri štarte spustiť režim spájkovania (Z=Spájkovanie | S=Spanok | I=Spanok izbová teplota)" + "desc": "Pri štarte spustiť režim spájkovania (V=Vyp | Z=Spájkovanie | S=Spanok | I=Spanok izbová teplota)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Povoliť zámok", "tlačidiel" ], - "desc": "Zamknutie tlačidiel - dlhé stlačenie oboch naraz počas spájkovania (B=Okrem boost | P=Plné zamknutie)" + "desc": "Zamknutie tlačidiel - dlhé stlačenie oboch naraz počas spájkovania (Z=Zakázať | B=Okrem boost | P=Plné zamknutie)" }, "MotionSensitivity": { "text2": [ "Citlivosť", "pohybu" ], - "desc": "Citlivosť detekcie pohybu (1=Min | ... | 9=Max)" + "desc": "Citlivosť detekcie pohybu (0=Vyp | 1=Min | ... | 9=Max)" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Citliv.", "Hall" ], - "desc": "Citlivosť Hallovho senzora pre detekciu spánku (1=Min | ... | 9=Max)" + "desc": "Citlivosť Hallovho senzora pre detekciu spánku (0=Vyp | 1=Min | ... | 9=Max)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Rýchlosť", "animácií" ], - "desc": "Rýchlosť animácií ikoniek v menu (P=pomaly | S=stredne | R=rýchlo)" + "desc": "Rýchlosť animácií ikoniek v menu (O=off | P=pomaly | S=stredne | R=rýchlo)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_SL.json b/Translations/translation_SL.json index 0da2158f..3f259a56 100644 --- a/Translations/translation_SL.json +++ b/Translations/translation_SL.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Spim...", "SleepingTipAdvancedString": "Konica", + "OffString": "Off", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "D", "SettingLeftChar": "L", "SettingAutoChar": "S", + "SettingOffChar": "U", "SettingSlowChar": "P", "SettingMediumChar": "M", "SettingFastChar": "H", + "SettingStartNoneChar": "U", "SettingStartSolderingChar": "S", "SettingStartSleepChar": "Z", "SettingStartSleepOffChar": "V", + "SettingSensitivityOff": "U", + "SettingSensitivityLow": "N", + "SettingSensitivityMedium": "S", + "SettingSensitivityHigh": "V", + "SettingLockDisableChar": "O", "SettingLockBoostChar": "L", "SettingLockFullChar": "P" }, @@ -131,7 +139,7 @@ "Samodejni", "zagon" ], - "desc": "Samodejno gretje konice ob vklopu (S=spajkanje | Z=spanje | V=spanje na sobni temperaturi)" + "desc": "Samodejno gretje konice ob vklopu (U=ugasnjeno | S=spajkanje | Z=spanje | V=spanje na sobni temperaturi)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Omogoči", "zaklep gumbov" ], - "desc": "Za zaklep med spajkanjem drži oba gumba (L=le pospešeno | P=polno)" + "desc": "Za zaklep med spajkanjem drži oba gumba (O=onemogoči | L=le pospešeno | P=polno)" }, "MotionSensitivity": { "text2": [ "Občutljivost", "premikanja" ], - "desc": "1=najmanjša | ... | 9=največja" + "desc": "0=izklopljeno | 1=najmanjša | ... | 9=največja" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Občut.", "Hall son" ], - "desc": "Občutljivost Hallove sonde za zaznavanje spanja (1=najmanjša | ... | 9=največja)" + "desc": "Občutljivost Hallove sonde za zaznavanje spanja (0=izklopljeno | 1=najmanjša | ... | 9=največja)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Anim.", "speed" ], - "desc": "Pace of icon animations in menu (P=slow | M=medium | H=fast)" + "desc": "Pace of icon animations in menu (O=off | P=slow | M=medium | H=fast)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_SR_CYRL.json b/Translations/translation_SR_CYRL.json index d6914fdb..c268f8c2 100644 --- a/Translations/translation_SR_CYRL.json +++ b/Translations/translation_SR_CYRL.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Сан", "SleepingAdvancedString": "Спавање...", "SleepingTipAdvancedString": "Врх:", + "OffString": "Иск", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "Д", "SettingLeftChar": "Л", "SettingAutoChar": "А", + "SettingOffChar": "O", "SettingSlowChar": "С", "SettingMediumChar": "M", "SettingFastChar": "Б", + "SettingStartNoneChar": "И", "SettingStartSolderingChar": "Л", "SettingStartSleepChar": "С", "SettingStartSleepOffChar": "X", + "SettingSensitivityOff": "O", + "SettingSensitivityLow": "L", + "SettingSensitivityMedium": "M", + "SettingSensitivityHigh": "H", + "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -131,7 +139,7 @@ "Врући", "старт" ], - "desc": "Лемилица одмах по покретању прелази у режим лемљења и греје се. (Л=лемљење | С=спавати | X=спавати собна температура)" + "desc": "Лемилица одмах по покретању прелази у режим лемљења и греје се. (И=искључити | Л=лемљење | С=спавати | X=спавати собна температура)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Allow locking", "buttons" ], - "desc": "While soldering, hold down both buttons to toggle locking them (B=boost mode only | F=full locking)" + "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)" }, "MotionSensitivity": { "text2": [ "Осетљивост", "на покрет" ], - "desc": "Осетљивост сензора покрета. (1=најмање осетљиво | ... | 9=најосетљивије)" + "desc": "Осетљивост сензора покрета. (0=искључено | 1=најмање осетљиво | ... | 9=најосетљивије)" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Hall sensor", "sensitivity" ], - "desc": "Sensitivity to magnets (1=најмање осетљиво | ... | 9=најосетљивије)" + "desc": "Sensitivity to magnets (0=искључено | 1=најмање осетљиво | ... | 9=најосетљивије)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Anim.", "speed" ], - "desc": "Pace of icon animations in menu (С=slow | M=medium | Б=fast)" + "desc": "Pace of icon animations in menu (O=off | С=slow | M=medium | Б=fast)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_SR_LATN.json b/Translations/translation_SR_LATN.json index 8fa787af..6416e085 100644 --- a/Translations/translation_SR_LATN.json +++ b/Translations/translation_SR_LATN.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzz", "SleepingAdvancedString": "Spavanje...", "SleepingTipAdvancedString": "Vrh:", + "OffString": "Isk", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "D", "SettingLeftChar": "L", "SettingAutoChar": "A", + "SettingOffChar": "O", "SettingSlowChar": "S", "SettingMediumChar": "M", "SettingFastChar": "B", + "SettingStartNoneChar": "I", "SettingStartSolderingChar": "L", "SettingStartSleepChar": "S", "SettingStartSleepOffChar": "X", + "SettingSensitivityOff": "O", + "SettingSensitivityLow": "L", + "SettingSensitivityMedium": "M", + "SettingSensitivityHigh": "H", + "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -131,7 +139,7 @@ "Vrući", "start" ], - "desc": "Lemilica odmah po pokretanju prelazi u režim lemljenja i greje se. (L=lemljenje | S=spavati | X=spavati sobna temperatura)" + "desc": "Lemilica odmah po pokretanju prelazi u režim lemljenja i greje se. (I=isključiti | L=lemljenje | S=spavati | X=spavati sobna temperatura)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Allow locking", "buttons" ], - "desc": "While soldering, hold down both buttons to toggle locking them (B=boost mode only | F=full locking)" + "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)" }, "MotionSensitivity": { "text2": [ "Osetljivost", "na pokret" ], - "desc": "Osetljivost senzora pokreta. (1=najmanje osetljivo | ... | 9=najosetljivije)" + "desc": "Osetljivost senzora pokreta. (0=isključeno | 1=najmanje osetljivo | ... | 9=najosetljivije)" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Hall sensor", "sensitivity" ], - "desc": "Sensitivity to magnets (1=najmanje osetljivo | ... | 9=najosetljivije)" + "desc": "Sensitivity to magnets (0=isključeno | 1=najmanje osetljivo | ... | 9=najosetljivije)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Anim.", "speed" ], - "desc": "Pace of icon animations in menu (S=slow | M=medium | B=fast)" + "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | B=fast)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_SV.json b/Translations/translation_SV.json index be20c422..6680841a 100644 --- a/Translations/translation_SV.json +++ b/Translations/translation_SV.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Viloläge...", "SleepingTipAdvancedString": "Spets:", + "OffString": "Av", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "H", "SettingLeftChar": "V", "SettingAutoChar": "A", + "SettingOffChar": "A", "SettingSlowChar": "L", "SettingMediumChar": "M", "SettingFastChar": "S", + "SettingStartNoneChar": "A", "SettingStartSolderingChar": "L", "SettingStartSleepChar": "V", "SettingStartSleepOffChar": "R", + "SettingSensitivityOff": "A", + "SettingSensitivityLow": "L", + "SettingSensitivityMedium": "M", + "SettingSensitivityHigh": "H", + "SettingLockDisableChar": "A", "SettingLockBoostChar": "T", "SettingLockFullChar": "F" }, @@ -131,7 +139,7 @@ "Auto", "start" ], - "desc": "Startar automatiskt lödpennan vid uppstart. (L=Lödning | V=Viloläge | R=Viloläge Rumstemperatur)" + "desc": "Startar automatiskt lödpennan vid uppstart. (A=Av | L=Lödning | V=Viloläge | R=Viloläge Rumstemperatur)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Tillåt lås", "via knappar" ], - "desc": "Vid lödning, håll nere bägge knappar för att slå på lås (T=Bara turbo | F=Fullt lås)" + "desc": "Vid lödning, håll nere bägge knappar för att slå på lås (A=Av | T=Bara turbo | F=Fullt lås)" }, "MotionSensitivity": { "text2": [ "Rörelse-", "känslighet" ], - "desc": "Rörelsekänslighet (1=minst känslig | ... | 9=mest känslig)" + "desc": "Rörelsekänslighet (0=Av | 1=minst känslig | ... | 9=mest känslig)" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Sensor-", "känslght" ], - "desc": "Känslighet för halleffekt-sensorn för viloläges-detektering (1=minst känslig | ... | 9=mest känslig)" + "desc": "Känslighet för halleffekt-sensorn för viloläges-detektering (0=Av | 1=minst känslig | ... | 9=mest känslig)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Anim.-", "hastighet" ], - "desc": "Animationshastighet för ikoner i menyer (L=långsam | M=medel | S=snabb)" + "desc": "Animationshastighet för ikoner i menyer (A=av | L=långsam | M=medel | S=snabb)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_TR.json b/Translations/translation_TR.json index d084792a..0a63c7dd 100644 --- a/Translations/translation_TR.json +++ b/Translations/translation_TR.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Bekleme Modu ...", "SleepingTipAdvancedString": "Uç:", + "OffString": "Kapalı", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "R", "SettingLeftChar": "L", "SettingAutoChar": "O", + "SettingOffChar": "K", "SettingSlowChar": "Y", "SettingMediumChar": "O", "SettingFastChar": "H", + "SettingStartNoneChar": "K", "SettingStartSolderingChar": "L", "SettingStartSleepChar": "U", "SettingStartSleepOffChar": "S", + "SettingSensitivityOff": "K", + "SettingSensitivityLow": "L", + "SettingSensitivityMedium": "O", + "SettingSensitivityHigh": "H", + "SettingLockDisableChar": "K", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -131,7 +139,7 @@ "OTOBAŞ", "" ], - "desc": "Güç verildiğinde otomatik olarak lehimleme modunda başlat. (L=Lehimleme Modu | U=Uyku Modu | S=Uyku Modu Oda Sıcaklığı)" + "desc": "Güç verildiğinde otomatik olarak lehimleme modunda başlat. (K=Kapalı | L=Lehimleme Modu | U=Uyku Modu | S=Uyku Modu Oda Sıcaklığı)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Allow locking", "buttons" ], - "desc": "While soldering, hold down both buttons to toggle locking them (B=boost mode only | F=full locking)" + "desc": "While soldering, hold down both buttons to toggle locking them (K=Kapalı | B=boost mode only | F=full locking)" }, "MotionSensitivity": { "text2": [ "HARHAS", "" ], - "desc": "Hareket Hassasiyeti (1=En az duyarlı | ... | 9=En duyarlı)" + "desc": "Hareket Hassasiyeti (0=Kapalı | 1=En az duyarlı | ... | 9=En duyarlı)" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Hall sensor", "sensitivity" ], - "desc": "Sensitivity to magnets (1=En az duyarlı | ... | 9=En duyarlı)" + "desc": "Sensitivity to magnets (0=Kapalı | 1=En az duyarlı | ... | 9=En duyarlı)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Anim.", "speed" ], - "desc": "Pace of icon animations in menu (Y=Yavaş | O=Orta | H=Hızlı)" + "desc": "Pace of icon animations in menu (K=Kapalı | Y=Yavaş | O=Orta | H=Hızlı)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_UK.json b/Translations/translation_UK.json index 98513b2e..fc9f297f 100644 --- a/Translations/translation_UK.json +++ b/Translations/translation_UK.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "ZzZzz", "SleepingAdvancedString": "Очікування...", "SleepingTipAdvancedString": "Жало:", + "OffString": "Вимк", "DeviceFailedValidationWarning": "Вірогідно ваш пристрій підробний!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "П", "SettingLeftChar": "Л", "SettingAutoChar": "A", + "SettingOffChar": "B", "SettingSlowChar": "Н", "SettingMediumChar": "M", "SettingFastChar": "М", + "SettingStartNoneChar": "В", "SettingStartSolderingChar": "П", "SettingStartSleepChar": "О", "SettingStartSleepOffChar": "К", + "SettingSensitivityOff": "В", + "SettingSensitivityLow": "Н", + "SettingSensitivityMedium": "С", + "SettingSensitivityHigh": "М", + "SettingLockDisableChar": "В", "SettingLockBoostChar": "Т", "SettingLockFullChar": "П" }, @@ -131,7 +139,7 @@ "Гарячий", "старт" ], - "desc": "Режим в якому запускається паяльник при ввімкненні (П=Пайка | О=Очікування | К=Очікування при кімн. темп.)" + "desc": "Режим в якому запускається паяльник при ввімкненні (В=Вимк. | П=Пайка | О=Очікування | К=Очікування при кімн. темп.)" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Дозволити", "блок. кнопок" ], - "desc": "Під час пайки тривале натискання обох кнопок заблокує їх (Т=Тільки турбо | П=Повне)" + "desc": "Під час пайки тривале натискання обох кнопок заблокує їх (В=Вимк | Т=Тільки турбо | П=Повне)" }, "MotionSensitivity": { "text2": [ "Чутливість", "сенсору руху" ], - "desc": "Акселерометр (1=мін. чутливості | ... | 9=макс. чутливості)" + "desc": "Акселерометр (0=Вимк. | 1=мін. чутливості | ... | 9=макс. чутливості)" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Чутливість", "Ефекту Холла" ], - "desc": "Чутливість датчика ефекту Холла при виявленні сну (1=мін. чутливості | ... | 9=макс. чутливості)" + "desc": "Чутливість датчика ефекту Холла при виявленні сну (0=Вимк. | 1=мін. чутливості | ... | 9=макс. чутливості)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Швидкість", "анімації" ], - "desc": "Швидкість анімації іконок у головному меню (Мілісекунди) (Н=Низькa | С=Середня | М=Макс)" + "desc": "Швидкість анімації іконок у головному меню (Мілісекунди) (В=Вимк | Н=Низькa | С=Середня | М=Макс)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_VI.json b/Translations/translation_VI.json index 18f1f830..67bf683f 100644 --- a/Translations/translation_VI.json +++ b/Translations/translation_VI.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Đang ngu...", "SleepingTipAdvancedString": "Meo:", + "OffString": "Tat", "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" }, "messagesWarn": { @@ -44,12 +45,19 @@ "SettingRightChar": "R", "SettingLeftChar": "L", "SettingAutoChar": "A", + "SettingOffChar": "O", "SettingSlowChar": "S", "SettingMediumChar": "M", "SettingFastChar": "F", + "SettingStartNoneChar": "O", "SettingStartSolderingChar": "S", "SettingStartSleepChar": "Z", "SettingStartSleepOffChar": "R", + "SettingSensitivityOff": "O", + "SettingSensitivityLow": "L", + "SettingSensitivityMedium": "M", + "SettingSensitivityHigh": "H", + "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" }, @@ -131,7 +139,7 @@ "Nhiet đo", "đang tăng" ], - "desc": "S=nhiet đo hàn | Z=cho o nhiet đo ngu đen khi cu đong | R=cho mà không gia nhiet đen khi cu đong" + "desc": "- O=tat | S=nhiet đo hàn | Z=cho o nhiet đo ngu đen khi cu đong | R=cho mà không gia nhiet đen khi cu đong" }, "TempChangeShortStep": { "text2": [ @@ -152,14 +160,14 @@ "Cho phép khóa", "các nút" ], - "desc": "Trong khi hàn, giu ca 2 nút đe khóa (B=chi che đo tăng cuong | F=khóa hoàn toàn)" + "desc": "Trong khi hàn, giu ca 2 nút đe khóa(D=tat | B=chi che đo tăng cuong | F=khóa hoàn toàn)" }, "MotionSensitivity": { "text2": [ "Cam bien", "cu đong" ], - "desc": "1=đo nhay thap nhat| ... | 9=đo nhay cao nhat" + "desc": "- 0=tat | 1=đo nhay thap nhat| ... | 9=đo nhay cao nhat" }, "SleepTemperature": { "text2": [ @@ -187,7 +195,7 @@ "Hall", "đo nhay" ], - "desc": "Đo nhay cam bien Hall đe phát hien che đo ngu (1=ít nhay nhat |...| 9=nhay nhat)" + "desc": "Đo nhay cam bien Hall đe phát hien che đo ngu (0=tat | 1=ít nhay nhat |...| 9=nhay nhat)" }, "TemperatureUnit": { "text2": [ @@ -229,7 +237,7 @@ "Toc đo", "hoat anh" ], - "desc": "-Toc đo cua hoat anh menu (S=cham | M=trung bình | F=nhanh)" + "desc": "-Toc đo cua hoat anh menu (O=tat | S=cham | M=trung bình | F=nhanh)" }, "AnimLoop": { "text2": [ diff --git a/Translations/translation_YUE_HK.json b/Translations/translation_YUE_HK.json index d5ff5172..8a343953 100644 --- a/Translations/translation_YUE_HK.json +++ b/Translations/translation_YUE_HK.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Sleeping...", "SleepingTipAdvancedString": "Tip:", + "OffString": "關", "DeviceFailedValidationWarning": "依支焫雞好有可能係冒牌貨！" }, "messagesWarn": { @@ -29,12 +30,19 @@ "SettingRightChar": "右", "SettingLeftChar": "左", "SettingAutoChar": "自", + "SettingOffChar": "關", "SettingSlowChar": "慢", "SettingMediumChar": "中", "SettingFastChar": "快", + "SettingStartNoneChar": "無", "SettingStartSolderingChar": "焊", "SettingStartSleepChar": "待", "SettingStartSleepOffChar": "室", + "SettingSensitivityOff": "關", + "SettingSensitivityLow": "低", + "SettingSensitivityMedium": "中", + "SettingSensitivityHigh": "高", + "SettingLockDisableChar": "無", "SettingLockBoostChar": "增", "SettingLockFullChar": "全" }, @@ -83,7 +91,7 @@ }, "AutoStart": { "text2": "自動啓用", - "desc": "開機時自動啓用 <焊=焊接模式 | 待=待機模式 | 室=室温待機>" + "desc": "開機時自動啓用 <無=停用 | 焊=焊接模式 | 待=待機模式 | 室=室温待機>" }, "TempChangeShortStep": { "text2": "温度調整 短", @@ -95,11 +103,11 @@ }, "LockingMode": { "text2": "撳掣鎖定", - "desc": "喺焊接模式時，同時長撳兩粒掣啓用撳掣鎖定 < 增=淨係容許增熱模式 | 全=鎖定全部>" + "desc": "喺焊接模式時，同時長撳兩粒掣啓用撳掣鎖定 <無=停用 | 增=淨係容許增熱模式 | 全=鎖定全部>" }, "MotionSensitivity": { "text2": "動作敏感度", - "desc": "1=最低敏感度 | ... | 9=最高敏感度" + "desc": "0=停用 | 1=最低敏感度 | ... | 9=最高敏感度" }, "SleepTemperature": { "text2": "待機温度", @@ -115,7 +123,7 @@ }, "HallEffSensitivity": { "text2": "磁場敏感度", - "desc": "磁場感應器用嚟啓動待機模式嘅敏感度 <1=最低敏感度 | ... | 9=最高敏感度>" + "desc": "磁場感應器用嚟啓動待機模式嘅敏感度 <0=停用 | 1=最低敏感度 | ... | 9=最高敏感度>" }, "TemperatureUnit": { "text2": "温度單位", @@ -139,7 +147,7 @@ }, "AnimSpeed": { "text2": "動畫速度", - "desc": "功能表圖示動畫嘅速度 <慢=慢速 | 中=中速 | 快=快速>" + "desc": "功能表圖示動畫嘅速度 <關=不顯示動畫 | 慢=慢速 | 中=中速 | 快=快速>" }, "AnimLoop": { "text2": "動畫循環", diff --git a/Translations/translation_ZH_CN.json b/Translations/translation_ZH_CN.json index 209cc84a..a005fa84 100644 --- a/Translations/translation_ZH_CN.json +++ b/Translations/translation_ZH_CN.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Zzzz...", "SleepingTipAdvancedString": "--->", + "OffString": "关", "DeviceFailedValidationWarning": "这支电烙铁很有可能是冒牌货！" }, "messagesWarn": { @@ -29,12 +30,19 @@ "SettingRightChar": "右", "SettingLeftChar": "左", "SettingAutoChar": "自", + "SettingOffChar": "关", "SettingSlowChar": "慢", "SettingMediumChar": "中", "SettingFastChar": "快", + "SettingStartNoneChar": "无", "SettingStartSolderingChar": "焊", "SettingStartSleepChar": "待", "SettingStartSleepOffChar": "室", + "SettingSensitivityOff": "关", + "SettingSensitivityLow": "低", + "SettingSensitivityMedium": "中", + "SettingSensitivityHigh": "高", + "SettingLockDisableChar": "无", "SettingLockBoostChar": "增", "SettingLockFullChar": "全" }, @@ -83,7 +91,7 @@ }, "AutoStart": { "text2": "自动启动", - "desc": "开机时自动启动 <焊=焊接模式 | 待=待机模式 | 室=室温待机>" + "desc": "开机时自动启动 <无=禁用 | 焊=焊接模式 | 待=待机模式 | 室=室温待机>" }, "TempChangeShortStep": { "text2": "短按温度调整", @@ -95,11 +103,11 @@ }, "LockingMode": { "text2": "按键锁定", - "desc": "焊接模式时，同时长按两个按键启用按键锁定 <增=只容许增热模式 | 全=完全锁定>" + "desc": "焊接模式时，同时长按两个按键启用按键锁定 <无=禁用 | 增=只容许增热模式 | 全=完全锁定>" }, "MotionSensitivity": { "text2": "动作灵敏度", - "desc": "1=最低灵敏度 | ... | 9=最高灵敏度" + "desc": "0=禁用 | 1=最低灵敏度 | ... | 9=最高灵敏度" }, "SleepTemperature": { "text2": "待机温度", @@ -115,7 +123,7 @@ }, "HallEffSensitivity": { "text2": "磁场灵敏度", - "desc": "霍尔效应传感器用作启动待机模式的灵敏度 <1=最低灵敏度 | ... | 9=最高灵敏度>" + "desc": "霍尔效应传感器用作启动待机模式的灵敏度 <0=禁用 | 1=最低灵敏度 | ... | 9=最高灵敏度>" }, "TemperatureUnit": { "text2": "温度单位", @@ -139,7 +147,7 @@ }, "AnimSpeed": { "text2": "动画速度", - "desc": "主菜单中功能图标动画的播放速度 <慢=慢速 | 中=中速 | 快=快速>" + "desc": "主菜单中功能图标动画的播放速度 <关=不显示动画 | 慢=慢速 | 中=中速 | 快=快速>" }, "AnimLoop": { "text2": "动画循环", diff --git a/Translations/translation_ZH_TW.json b/Translations/translation_ZH_TW.json index 6ed6fd67..1f2ab233 100644 --- a/Translations/translation_ZH_TW.json +++ b/Translations/translation_ZH_TW.json @@ -12,6 +12,7 @@ "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Sleeping...", "SleepingTipAdvancedString": "Tip:", + "OffString": "關", "DeviceFailedValidationWarning": "這支電烙鐵很有可能是冒牌貨！" }, "messagesWarn": { @@ -29,12 +30,19 @@ "SettingRightChar": "右", "SettingLeftChar": "左", "SettingAutoChar": "自", + "SettingOffChar": "關", "SettingSlowChar": "慢", "SettingMediumChar": "中", "SettingFastChar": "快", + "SettingStartNoneChar": "無", "SettingStartSolderingChar": "焊", "SettingStartSleepChar": "待", "SettingStartSleepOffChar": "室", + "SettingSensitivityOff": "關", + "SettingSensitivityLow": "低", + "SettingSensitivityMedium": "中", + "SettingSensitivityHigh": "高", + "SettingLockDisableChar": "無", "SettingLockBoostChar": "增", "SettingLockFullChar": "全" }, @@ -83,7 +91,7 @@ }, "AutoStart": { "text2": "自動啟用", - "desc": "開機時自動啟用 <焊=焊接模式 | 待=待機模式 | 室=室溫待機>" + "desc": "開機時自動啟用 <無=停用 | 焊=焊接模式 | 待=待機模式 | 室=室溫待機>" }, "TempChangeShortStep": { "text2": "溫度調整 短", @@ -95,11 +103,11 @@ }, "LockingMode": { "text2": "按鍵鎖定", - "desc": "於焊接模式時，同時長按兩個按鍵啟用按鍵鎖定 <增=只容許增熱模式 | 全=鎖定全部>" + "desc": "於焊接模式時，同時長按兩個按鍵啟用按鍵鎖定 <無=停用 | 增=只容許增熱模式 | 全=鎖定全部>" }, "MotionSensitivity": { "text2": "動作敏感度", - "desc": "1=最低敏感度 | ... | 9=最高敏感度" + "desc": "0=停用 | 1=最低敏感度 | ... | 9=最高敏感度" }, "SleepTemperature": { "text2": "待機溫度", @@ -115,7 +123,7 @@ }, "HallEffSensitivity": { "text2": "磁場敏感度", - "desc": "磁場感應器用作啟動待機模式的敏感度 <1=最低敏感度 | ... | 9=最高敏感度>" + "desc": "磁場感應器用作啟動待機模式的敏感度 <0=停用 | 1=最低敏感度 | ... | 9=最高敏感度>" }, "TemperatureUnit": { "text2": "溫標", @@ -139,7 +147,7 @@ }, "AnimSpeed": { "text2": "動畫速度", - "desc": "功能表圖示動畫的速度 <慢=慢速 | 中=中速 | 快=快速>" + "desc": "功能表圖示動畫的速度 <關=不顯示動畫 | 慢=慢速 | 中=中速 | 快=快速>" }, "AnimLoop": { "text2": "動畫循環", diff --git a/Translations/translations_def.js b/Translations/translations_def.js index a7625320..c9f89af1 100644 --- a/Translations/translations_def.js +++ b/Translations/translations_def.js @@ -43,6 +43,11 @@ var def = /// "maxLen": 6, "description": "The prefix text shown before tip temperature when the unit is sleeping with advanced view on." }, + { + "id": "OffString", + "maxLen": 3, + "description": "Shown when a setting is turned off." + }, { "id": "DeviceFailedValidationWarning", "default": "Device may be\ncounterfeit", @@ -116,6 +121,11 @@ var def = /// "len": 1, "description": "Shown when a setting is set to a medium value i.e. animation speed" }, + { + "id": "SettingOffChar", + "len": 1, + "description": "Shown when a setting is turned off" + }, { "id": "SettingStartSolderingChar", "len": 1, @@ -131,6 +141,37 @@ var def = /// "len": 1, "description": "Shown when the auto start state is set to go to an off state, but on movement wake into soldering mode." }, + { + "id": "SettingStartNoneChar", + "len": 1, + "description": "Shown when autostart state is to do nothing and go to a normal boot" + }, + { + "id": "SettingSensitivityOff", + "len": 1, + "description": "Shown when a sensitivity (hall effect sensor) is disabled. Turning off the sensor." + }, + { + "id": "SettingSensitivityLow", + "len": 1, + "description": "Shown when a sensitivity (hall effect) is not very sensitive" + }, + { + "id": "SettingSensitivityMedium", + "len": 1, + "description": "Shown when a sensitivity (hall effect) is average sensitive" + }, + { + "id": "SettingSensitivityHigh", + "len": 1, + "description": "Shown when a sensitivity (hall effect) is highly sensitive" + }, + { + "id": "SettingLockDisableChar", + "len": 1, + "default": "D", + "description": "Shown when locking mode is turned off." + }, { "id": "SettingLockBoostChar", "len": 1, From f4320e95654a57fd2cbe0db5c9cf58f4522f6fca Mon Sep 17 00:00:00 2001 From: JugglerLKR Date: Wed, 14 Dec 2022 15:42:55 +0300 Subject: [PATCH 21/35] Update translation_RU.json updated some translation. new missing desc "" translation. CJC calibration translation --- Translations/translation_RU.json | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/Translations/translation_RU.json b/Translations/translation_RU.json index 3e56af03..a6dfab42 100644 --- a/Translations/translation_RU.json +++ b/Translations/translation_RU.json @@ -67,35 +67,35 @@ "Параметры", "питания" ], - "desc": "" + "desc": "Настройки питания (от аккумуляторов, QC, PD и т.п." }, "SolderingMenu": { "text2": [ "Параметры", "пайки" ], - "desc": "" + "desc": "Найстроки режимов и паяния, турбо-режима" }, "PowerSavingMenu": { "text2": [ "Режимы", "сна" ], - "desc": "" + "desc": "Режимы сна для экономии питания" }, "UIMenu": { "text2": [ "Параметры", "интерфейса" ], - "desc": "" + "desc": "Настройки интерфейса" }, "AdvancedMenu": { "text2": [ "Дополнител.", "настройки" ], - "desc": "" + "desc": "Дополнительные настройки" } }, "menuOptions": { @@ -167,14 +167,14 @@ "Чувствительн.", "акселерометра" ], - "desc": "Чувствительность акселерометра (0=Выкл. | 1=Мин. | ... | 9=Макс.)" + "desc": "Чувствительность акселерометра (0=Выкл. | 1=мин. | ... | 9=макс.)" }, "SleepTemperature": { "text2": [ "Темп.", "ожидания" ], - "desc": "Температура режима ожидания" + "desc": "Температура жала в режиме ожидания" }, "SleepTimeout": { "text2": [ @@ -188,21 +188,21 @@ "Таймаут", "выключения" ], - "desc": "Время до отключения паяльника (Минуты)" + "desc": "Время до выключения паяльника (минуты)" }, "HallEffSensitivity": { "text2": [ "Датчик", "Холла" ], - "desc": "Чувствительность датчика Холла к переходу в спящий режим (0=Выкл. | 1=Мин. | ... | 9=Макс.)" + "desc": "Чувствительность датчика Холла к переходу в спящий режим (0=Выкл. | 1=мин. | ... | 9=макс.)" }, "TemperatureUnit": { "text2": [ "Единицы", "температуры" ], - "desc": "Единицы измерения температуры (C=Цельcия | F=Фаренгейта)" + "desc": "Единицы измерения температуры (C=°Цельcия | F=°Фаренгейта)" }, "DisplayRotation": { "text2": [ @@ -227,10 +227,10 @@ }, "ReverseButtonTempChange": { "text2": [ - "Инвертировать", - "кнопки" + "Поменять", + "кнопки+-" ], - "desc": "Инвертировать кнопки изменения температуры" + "desc": "Поменять кнопки изменения температуры" }, "AnimSpeed": { "text2": [ @@ -293,7 +293,7 @@ "Калибровка", "температуры" ], - "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" + "desc": "Калибровка температуры (CJC) при следующем включении (не требуется при разнице менее 5°C)" }, "VoltageCalibration": { "text2": [ @@ -335,7 +335,7 @@ "Язык:", " RU Русский" ], - "desc": "" + "desc": "Выбор языка" } } -} \ No newline at end of file +} From 325ac498e8c663ba0f9b759e29b48aeef1e9bb0f Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Fri, 16 Dec 2022 23:14:38 +0100 Subject: [PATCH 22/35] removed some unused lines 6 reordered others --- Translations/translation_BE.json | 4 --- Translations/translation_BG.json | 4 --- Translations/translation_CS.json | 4 --- Translations/translation_DA.json | 4 --- Translations/translation_DE.json | 4 --- Translations/translation_EL.json | 4 --- Translations/translation_EN.json | 16 +++++------ Translations/translation_ES.json | 4 --- Translations/translation_FI.json | 4 --- Translations/translation_FR.json | 4 --- Translations/translation_HR.json | 4 --- Translations/translation_HU.json | 4 --- Translations/translation_IT.json | 4 --- Translations/translation_JA_JP.json | 4 --- Translations/translation_LT.json | 4 --- Translations/translation_NB.json | 4 --- Translations/translation_NL.json | 4 --- Translations/translation_NL_BE.json | 4 --- Translations/translation_PL.json | 4 --- Translations/translation_PT.json | 4 --- Translations/translation_RO.json | 4 --- Translations/translation_RU.json | 4 --- Translations/translation_SK.json | 4 --- Translations/translation_SL.json | 4 --- Translations/translation_SR_CYRL.json | 4 --- Translations/translation_SR_LATN.json | 4 --- Translations/translation_SV.json | 4 --- Translations/translation_TR.json | 4 --- Translations/translation_UK.json | 4 --- Translations/translation_VI.json | 4 --- Translations/translation_YUE_HK.json | 4 --- Translations/translation_ZH_CN.json | 4 --- Translations/translation_ZH_TW.json | 4 --- Translations/translations_def.js | 38 +++++++-------------------- source/Core/Inc/Translation.h | 10 +++---- 35 files changed, 18 insertions(+), 174 deletions(-) diff --git a/Translations/translation_BE.json b/Translations/translation_BE.json index 67b9ae2a..d25f5df3 100644 --- a/Translations/translation_BE.json +++ b/Translations/translation_BE.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "П", "SettingStartSleepChar": "Ч", "SettingStartSleepOffChar": "К", - "SettingSensitivityOff": "А", - "SettingSensitivityLow": "Н", - "SettingSensitivityMedium": "С", - "SettingSensitivityHigh": "В", "SettingLockDisableChar": "А", "SettingLockBoostChar": "Т", "SettingLockFullChar": "П" diff --git a/Translations/translation_BG.json b/Translations/translation_BG.json index e6715866..3d33f47a 100644 --- a/Translations/translation_BG.json +++ b/Translations/translation_BG.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "Р", "SettingStartSleepChar": "С", "SettingStartSleepOffChar": "П", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" diff --git a/Translations/translation_CS.json b/Translations/translation_CS.json index 6a7e6bf4..ce82d4b4 100644 --- a/Translations/translation_CS.json +++ b/Translations/translation_CS.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "P", "SettingStartSleepChar": "S", "SettingStartSleepOffChar": "M", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "M", - "SettingSensitivityMedium": "S", - "SettingSensitivityHigh": "V", "SettingLockDisableChar": "Z", "SettingLockBoostChar": "B", "SettingLockFullChar": "U" diff --git a/Translations/translation_DA.json b/Translations/translation_DA.json index 37953a92..acecb5dc 100644 --- a/Translations/translation_DA.json +++ b/Translations/translation_DA.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "L", "SettingStartSleepChar": "D", "SettingStartSleepOffChar": "R", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" diff --git a/Translations/translation_DE.json b/Translations/translation_DE.json index 2902ee61..1590e89f 100644 --- a/Translations/translation_DE.json +++ b/Translations/translation_DE.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "L", "SettingStartSleepChar": "R", "SettingStartSleepOffChar": "K", - "SettingSensitivityOff": "A", - "SettingSensitivityLow": "N", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", "SettingLockDisableChar": "A", "SettingLockBoostChar": "B", "SettingLockFullChar": "V" diff --git a/Translations/translation_EL.json b/Translations/translation_EL.json index 27971dab..3af8cea4 100644 --- a/Translations/translation_EL.json +++ b/Translations/translation_EL.json @@ -56,10 +56,6 @@ "SettingStartSolderingChar": "Κ", "SettingStartSleepChar": "Ζ", "SettingStartSleepOffChar": "Υ", - "SettingSensitivityOff": "0", - "SettingSensitivityLow": "Χ", - "SettingSensitivityMedium": "Μ", - "SettingSensitivityHigh": "Υ", "SettingLockDisableChar": "Α", "SettingLockBoostChar": "B", "SettingLockFullChar": "Π" diff --git a/Translations/translation_EN.json b/Translations/translation_EN.json index 14405cc7..18a93b0e 100644 --- a/Translations/translation_EN.json +++ b/Translations/translation_EN.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "S", "SettingStartSleepChar": "Z", "SettingStartSleepOffChar": "R", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" @@ -67,35 +63,35 @@ "Power", "settings" ], - "desc": "Settings for Power Supply (Batteries, Quick Charge, PD etc)" + "desc": "" }, "SolderingMenu": { "text2": [ "Soldering", "settings" ], - "desc": "Soldering settings, boost modes; how the iron operates" + "desc": "" }, "PowerSavingMenu": { "text2": [ "Sleep", "mode" ], - "desc": "Sleep modes; methods we use to save power on the device by shutting down" + "desc": "" }, "UIMenu": { "text2": [ "User", "interface" ], - "desc": "User interactions (how it looks, animations, units etc)" + "desc": "" }, "AdvancedMenu": { "text2": [ "Advanced", "settings" ], - "desc": "Advanced or Misc options." + "desc": "" } }, "menuOptions": { @@ -335,7 +331,7 @@ "Language:", " EN English" ], - "desc": "Toggle active language" + "desc": "" } } } diff --git a/Translations/translation_ES.json b/Translations/translation_ES.json index 6b8539f2..b523274f 100644 --- a/Translations/translation_ES.json +++ b/Translations/translation_ES.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "S", "SettingStartSleepChar": "R", "SettingStartSleepOffChar": "F", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" diff --git a/Translations/translation_FI.json b/Translations/translation_FI.json index 57ec7664..482764e2 100644 --- a/Translations/translation_FI.json +++ b/Translations/translation_FI.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "J", "SettingStartSleepChar": "L", "SettingStartSleepOffChar": "H", - "SettingSensitivityOff": "P", - "SettingSensitivityLow": "A", - "SettingSensitivityMedium": "K", - "SettingSensitivityHigh": "S", "SettingLockDisableChar": "P", "SettingLockBoostChar": "V", "SettingLockFullChar": "K" diff --git a/Translations/translation_FR.json b/Translations/translation_FR.json index 51841fef..7e32ac83 100644 --- a/Translations/translation_FR.json +++ b/Translations/translation_FR.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "A", "SettingStartSleepChar": "V", "SettingStartSleepOffChar": "O", - "SettingSensitivityOff": "D", - "SettingSensitivityLow": "B", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "V" diff --git a/Translations/translation_HR.json b/Translations/translation_HR.json index 413cc867..85aa6aa1 100644 --- a/Translations/translation_HR.json +++ b/Translations/translation_HR.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "L", "SettingStartSleepChar": "R", "SettingStartSleepOffChar": "S", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" diff --git a/Translations/translation_HU.json b/Translations/translation_HU.json index b067537e..5b9ffb5b 100644 --- a/Translations/translation_HU.json +++ b/Translations/translation_HU.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "F", "SettingStartSleepChar": "A", "SettingStartSleepOffChar": "Sz", - "SettingSensitivityOff": "0", - "SettingSensitivityLow": "A", - "SettingSensitivityMedium": "K", - "SettingSensitivityHigh": "M", "SettingLockDisableChar": "K", "SettingLockBoostChar": "B", "SettingLockFullChar": "T" diff --git a/Translations/translation_IT.json b/Translations/translation_IT.json index 362ded6e..011659a4 100644 --- a/Translations/translation_IT.json +++ b/Translations/translation_IT.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "S", "SettingStartSleepChar": "R", "SettingStartSleepOffChar": "A", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "B", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "A", "SettingLockDisableChar": "D", "SettingLockBoostChar": "T", "SettingLockFullChar": "C" diff --git a/Translations/translation_JA_JP.json b/Translations/translation_JA_JP.json index d436af80..ec178893 100755 --- a/Translations/translation_JA_JP.json +++ b/Translations/translation_JA_JP.json @@ -38,10 +38,6 @@ "SettingStartSolderingChar": "熱", "SettingStartSleepChar": "待", "SettingStartSleepOffChar": "室", - "SettingSensitivityOff": "×", - "SettingSensitivityLow": "低", - "SettingSensitivityMedium": "中", - "SettingSensitivityHigh": "高", "SettingLockDisableChar": "×", "SettingLockBoostChar": "ブ", "SettingLockFullChar": "全" diff --git a/Translations/translation_LT.json b/Translations/translation_LT.json index 04ac9ed8..0b328c37 100644 --- a/Translations/translation_LT.json +++ b/Translations/translation_LT.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "T", "SettingStartSleepChar": "M", "SettingStartSleepOffChar": "K", - "SettingSensitivityOff": "I", - "SettingSensitivityLow": "Ž", - "SettingSensitivityMedium": "V", - "SettingSensitivityHigh": "A", "SettingLockDisableChar": "I", "SettingLockBoostChar": "T", "SettingLockFullChar": "V" diff --git a/Translations/translation_NB.json b/Translations/translation_NB.json index 43b3010e..175ade83 100644 --- a/Translations/translation_NB.json +++ b/Translations/translation_NB.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "L", "SettingStartSleepChar": "D", "SettingStartSleepOffChar": "R", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" diff --git a/Translations/translation_NL.json b/Translations/translation_NL.json index db38745d..7de18816 100644 --- a/Translations/translation_NL.json +++ b/Translations/translation_NL.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "G", "SettingStartSleepChar": "S", "SettingStartSleepOffChar": "B", - "SettingSensitivityOff": "U", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "G", - "SettingSensitivityHigh": "H", "SettingLockDisableChar": "U", "SettingLockBoostChar": "B", "SettingLockFullChar": "V" diff --git a/Translations/translation_NL_BE.json b/Translations/translation_NL_BE.json index 8201db73..75151c19 100644 --- a/Translations/translation_NL_BE.json +++ b/Translations/translation_NL_BE.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "T", "SettingStartSleepChar": "S", "SettingStartSleepOffChar": "K", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" diff --git a/Translations/translation_PL.json b/Translations/translation_PL.json index 745abb19..761f443b 100644 --- a/Translations/translation_PL.json +++ b/Translations/translation_PL.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "T", "SettingStartSleepChar": "Z", "SettingStartSleepOffChar": "O", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "N", - "SettingSensitivityMedium": "Ś", - "SettingSensitivityHigh": "W", "SettingLockDisableChar": "W", "SettingLockBoostChar": "B", "SettingLockFullChar": "P" diff --git a/Translations/translation_PT.json b/Translations/translation_PT.json index e4cee4be..7bd4a341 100644 --- a/Translations/translation_PT.json +++ b/Translations/translation_PT.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "S", "SettingStartSleepChar": "H", "SettingStartSleepOffChar": "A", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" diff --git a/Translations/translation_RO.json b/Translations/translation_RO.json index 6deb9dda..a19613da 100644 --- a/Translations/translation_RO.json +++ b/Translations/translation_RO.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "S", "SettingStartSleepChar": "Z", "SettingStartSleepOffChar": "R", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" diff --git a/Translations/translation_RU.json b/Translations/translation_RU.json index 3e56af03..1e1d9558 100644 --- a/Translations/translation_RU.json +++ b/Translations/translation_RU.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "П", "SettingStartSleepChar": "О", "SettingStartSleepOffChar": "К", - "SettingSensitivityOff": "О", - "SettingSensitivityLow": "Н", - "SettingSensitivityMedium": "С", - "SettingSensitivityHigh": "В", "SettingLockDisableChar": "О", "SettingLockBoostChar": "Т", "SettingLockFullChar": "П" diff --git a/Translations/translation_SK.json b/Translations/translation_SK.json index ad6bfd7d..da2545c3 100644 --- a/Translations/translation_SK.json +++ b/Translations/translation_SK.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "Z", "SettingStartSleepChar": "S", "SettingStartSleepOffChar": "I", - "SettingSensitivityOff": "Z", - "SettingSensitivityLow": "N", - "SettingSensitivityMedium": "S", - "SettingSensitivityHigh": "V", "SettingLockDisableChar": "Z", "SettingLockBoostChar": "B", "SettingLockFullChar": "P" diff --git a/Translations/translation_SL.json b/Translations/translation_SL.json index 3f259a56..a4bd973a 100644 --- a/Translations/translation_SL.json +++ b/Translations/translation_SL.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "S", "SettingStartSleepChar": "Z", "SettingStartSleepOffChar": "V", - "SettingSensitivityOff": "U", - "SettingSensitivityLow": "N", - "SettingSensitivityMedium": "S", - "SettingSensitivityHigh": "V", "SettingLockDisableChar": "O", "SettingLockBoostChar": "L", "SettingLockFullChar": "P" diff --git a/Translations/translation_SR_CYRL.json b/Translations/translation_SR_CYRL.json index c268f8c2..85bc7856 100644 --- a/Translations/translation_SR_CYRL.json +++ b/Translations/translation_SR_CYRL.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "Л", "SettingStartSleepChar": "С", "SettingStartSleepOffChar": "X", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" diff --git a/Translations/translation_SR_LATN.json b/Translations/translation_SR_LATN.json index 6416e085..fbb17932 100644 --- a/Translations/translation_SR_LATN.json +++ b/Translations/translation_SR_LATN.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "L", "SettingStartSleepChar": "S", "SettingStartSleepOffChar": "X", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" diff --git a/Translations/translation_SV.json b/Translations/translation_SV.json index 6680841a..c413a104 100644 --- a/Translations/translation_SV.json +++ b/Translations/translation_SV.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "L", "SettingStartSleepChar": "V", "SettingStartSleepOffChar": "R", - "SettingSensitivityOff": "A", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", "SettingLockDisableChar": "A", "SettingLockBoostChar": "T", "SettingLockFullChar": "F" diff --git a/Translations/translation_TR.json b/Translations/translation_TR.json index 0a63c7dd..08ccae16 100644 --- a/Translations/translation_TR.json +++ b/Translations/translation_TR.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "L", "SettingStartSleepChar": "U", "SettingStartSleepOffChar": "S", - "SettingSensitivityOff": "K", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "O", - "SettingSensitivityHigh": "H", "SettingLockDisableChar": "K", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" diff --git a/Translations/translation_UK.json b/Translations/translation_UK.json index fc9f297f..529aed04 100644 --- a/Translations/translation_UK.json +++ b/Translations/translation_UK.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "П", "SettingStartSleepChar": "О", "SettingStartSleepOffChar": "К", - "SettingSensitivityOff": "В", - "SettingSensitivityLow": "Н", - "SettingSensitivityMedium": "С", - "SettingSensitivityHigh": "М", "SettingLockDisableChar": "В", "SettingLockBoostChar": "Т", "SettingLockFullChar": "П" diff --git a/Translations/translation_VI.json b/Translations/translation_VI.json index 67bf683f..c183a826 100644 --- a/Translations/translation_VI.json +++ b/Translations/translation_VI.json @@ -53,10 +53,6 @@ "SettingStartSolderingChar": "S", "SettingStartSleepChar": "Z", "SettingStartSleepOffChar": "R", - "SettingSensitivityOff": "O", - "SettingSensitivityLow": "L", - "SettingSensitivityMedium": "M", - "SettingSensitivityHigh": "H", "SettingLockDisableChar": "D", "SettingLockBoostChar": "B", "SettingLockFullChar": "F" diff --git a/Translations/translation_YUE_HK.json b/Translations/translation_YUE_HK.json index 8a343953..fb42ebdd 100644 --- a/Translations/translation_YUE_HK.json +++ b/Translations/translation_YUE_HK.json @@ -38,10 +38,6 @@ "SettingStartSolderingChar": "焊", "SettingStartSleepChar": "待", "SettingStartSleepOffChar": "室", - "SettingSensitivityOff": "關", - "SettingSensitivityLow": "低", - "SettingSensitivityMedium": "中", - "SettingSensitivityHigh": "高", "SettingLockDisableChar": "無", "SettingLockBoostChar": "增", "SettingLockFullChar": "全" diff --git a/Translations/translation_ZH_CN.json b/Translations/translation_ZH_CN.json index a005fa84..db7133c0 100644 --- a/Translations/translation_ZH_CN.json +++ b/Translations/translation_ZH_CN.json @@ -38,10 +38,6 @@ "SettingStartSolderingChar": "焊", "SettingStartSleepChar": "待", "SettingStartSleepOffChar": "室", - "SettingSensitivityOff": "关", - "SettingSensitivityLow": "低", - "SettingSensitivityMedium": "中", - "SettingSensitivityHigh": "高", "SettingLockDisableChar": "无", "SettingLockBoostChar": "增", "SettingLockFullChar": "全" diff --git a/Translations/translation_ZH_TW.json b/Translations/translation_ZH_TW.json index 1f2ab233..0b8c5fc9 100644 --- a/Translations/translation_ZH_TW.json +++ b/Translations/translation_ZH_TW.json @@ -38,10 +38,6 @@ "SettingStartSolderingChar": "焊", "SettingStartSleepChar": "待", "SettingStartSleepOffChar": "室", - "SettingSensitivityOff": "關", - "SettingSensitivityLow": "低", - "SettingSensitivityMedium": "中", - "SettingSensitivityHigh": "高", "SettingLockDisableChar": "無", "SettingLockBoostChar": "增", "SettingLockFullChar": "全" diff --git a/Translations/translations_def.js b/Translations/translations_def.js index c9f89af1..dae40ac6 100644 --- a/Translations/translations_def.js +++ b/Translations/translations_def.js @@ -107,9 +107,9 @@ var def = /// "description": "Shown for automatic display rotation." }, { - "id": "SettingFastChar", + "id": "SettingOffChar", "len": 1, - "description": "Shown when a setting is set to a fast value i.e. animation speed" + "description": "Shown when a setting is turned off" }, { "id": "SettingSlowChar", @@ -122,9 +122,14 @@ var def = /// "description": "Shown when a setting is set to a medium value i.e. animation speed" }, { - "id": "SettingOffChar", + "id": "SettingFastChar", "len": 1, - "description": "Shown when a setting is turned off" + "description": "Shown when a setting is set to a fast value i.e. animation speed" + }, + { + "id": "SettingStartNoneChar", + "len": 1, + "description": "Shown when autostart state is to do nothing and go to a normal boot" }, { "id": "SettingStartSolderingChar", @@ -141,31 +146,6 @@ var def = /// "len": 1, "description": "Shown when the auto start state is set to go to an off state, but on movement wake into soldering mode." }, - { - "id": "SettingStartNoneChar", - "len": 1, - "description": "Shown when autostart state is to do nothing and go to a normal boot" - }, - { - "id": "SettingSensitivityOff", - "len": 1, - "description": "Shown when a sensitivity (hall effect sensor) is disabled. Turning off the sensor." - }, - { - "id": "SettingSensitivityLow", - "len": 1, - "description": "Shown when a sensitivity (hall effect) is not very sensitive" - }, - { - "id": "SettingSensitivityMedium", - "len": 1, - "description": "Shown when a sensitivity (hall effect) is average sensitive" - }, - { - "id": "SettingSensitivityHigh", - "len": 1, - "description": "Shown when a sensitivity (hall effect) is highly sensitive" - }, { "id": "SettingLockDisableChar", "len": 1, diff --git a/source/Core/Inc/Translation.h b/source/Core/Inc/Translation.h index c658f63b..28bffb08 100644 --- a/source/Core/Inc/Translation.h +++ b/source/Core/Inc/Translation.h @@ -99,18 +99,14 @@ struct TranslationIndexTable { uint16_t SettingRightChar; uint16_t SettingLeftChar; uint16_t SettingAutoChar; - uint16_t SettingFastChar; + uint16_t SettingOffChar; uint16_t SettingSlowChar; uint16_t SettingMediumChar; - uint16_t SettingOffChar; + uint16_t SettingFastChar; + uint16_t SettingStartNoneChar; uint16_t SettingStartSolderingChar; uint16_t SettingStartSleepChar; uint16_t SettingStartSleepOffChar; - uint16_t SettingStartNoneChar; - uint16_t SettingSensitivityOff; - uint16_t SettingSensitivityLow; - uint16_t SettingSensitivityMedium; - uint16_t SettingSensitivityHigh; uint16_t SettingLockDisableChar; uint16_t SettingLockBoostChar; uint16_t SettingLockFullChar; From d68d3f8a1f3ed6903e184d3e5d9011032b6652bc Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Fri, 16 Dec 2022 23:28:29 +0100 Subject: [PATCH 23/35] Update translation_EN.json --- Translations/translation_EN.json | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Translations/translation_EN.json b/Translations/translation_EN.json index 18a93b0e..72f503ca 100644 --- a/Translations/translation_EN.json +++ b/Translations/translation_EN.json @@ -219,7 +219,7 @@ "Scrolling", "speed" ], - "desc": "Speed info text scrolls past at (S=slow | F=fast)" + "desc": "Scrolling speed of info text (S=slow | F=fast)" }, "ReverseButtonTempChange": { "text2": [ @@ -289,7 +289,7 @@ "Calibrate CJC", "at next boot" ], - "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" + "desc": "Calbrate Cold Junction Compensation at next boot (not required if Delta T is < 5°C)" }, "VoltageCalibration": { "text2": [ @@ -303,7 +303,7 @@ "Power", "pulse" ], - "desc": "Intensity of power of keep-awake-pulse (watt)" + "desc": "Intensity of power of keep-awake-pulse (W=watt)" }, "PowerPulseWait": { "text2": [ From a0764c08a52e79dc0679229bc1ea98dad3e3cdea Mon Sep 17 00:00:00 2001 From: WillCap397 <121361699+WillCap397@users.noreply.github.com> Date: Sat, 24 Dec 2022 22:39:46 +0100 Subject: [PATCH 24/35] Update translation_IT.json fixed a typo in the first lines, changed "impostazioni iniziali" with "impostazioni di default", replaced "Voltaggio" with "Tensione" since Voltaggio is considered incorrect by most technicians an is likely an "italianization" of Voltage instead of a proper translation --- Translations/translation_IT.json | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/Translations/translation_IT.json b/Translations/translation_IT.json index 362ded6e..79182ea8 100644 --- a/Translations/translation_IT.json +++ b/Translations/translation_IT.json @@ -3,9 +3,9 @@ "languageLocalName": "Italiano", "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Prima di riavvire assicurati che la punta e l'impugnatura siano a temperatura ambiente!", + "SettingsCalibrationWarning": "Prima di riavviare assicurati che punta e impugnatura siano a temperatura ambiente!", "CJCCalibrating": "Calibrazione in corso", - "SettingsResetWarning": "Ripristinare le impostazioni iniziali?", + "SettingsResetWarning": "Ripristinare le impostazioni di default?", "UVLOWarningString": "DC BASSA", "UndervoltageString": "DC INSUFFICIENTE", "InputVoltageString": "V in:", @@ -13,7 +13,7 @@ "SleepingAdvancedString": "Riposo", "SleepingTipAdvancedString": "Punta:", "OffString": "OFF", - "DeviceFailedValidationWarning": "È probabile che il dispositivo in uso sia contraffatto!" + "DeviceFailedValidationWarning": "È probabile che questo dispositivo sia contraffatto!" }, "messagesWarn": { "CJCCalibrationDone": [ @@ -115,10 +115,10 @@ }, "QCMaxVoltage": { "text2": [ - "Voltaggio", + "Tensione", "QC" ], - "desc": "Imposta il massimo voltaggio negoziabile con un alimentatore Quick Charge [volt]" + "desc": "Imposta la tensione massima negoziabile con un alimentatore Quick Charge [volt]" }, "PDNegTimeout": { "text2": [ @@ -328,7 +328,7 @@ "Ripristino", "impostazioni" ], - "desc": "Ripristina le impostazioni allo stato iniziale" + "desc": "Ripristina le impostazioni di default" }, "LanguageSwitch": { "text2": [ From dee488425279e611a0dfc471e8f54d457274b61e Mon Sep 17 00:00:00 2001 From: Lalamper Date: Tue, 27 Dec 2022 22:47:25 +0100 Subject: [PATCH 25/35] translate missing parts --- Translations/translation_HU.json | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/Translations/translation_HU.json b/Translations/translation_HU.json index b067537e..16fb63b8 100644 --- a/Translations/translation_HU.json +++ b/Translations/translation_HU.json @@ -3,22 +3,22 @@ "languageLocalName": "Magyar", "tempUnitFahrenheit": false, "messages": { - "SettingsCalibrationWarning": "Before rebooting, make sure tip & handle are at room temperature!", - "CJCCalibrating": "calibrating", + "SettingsCalibrationWarning": "Újraindítás előtt a hegy és az eszköz legyen szobahőmérsékletű!", + "CJCCalibrating": "Kalibrálás", "SettingsResetWarning": "Biztos visszaállítja a beállításokat alapértékekre?", - "UVLOWarningString": "DC TÚL KEVÉS", + "UVLOWarningString": "DC túl alacsony", "UndervoltageString": "Alulfeszültség", "InputVoltageString": "Bemenet V: ", "SleepingSimpleString": "Zzzz", "SleepingAdvancedString": "Alvás...", "SleepingTipAdvancedString": "Hegy:", "OffString": "Ki", - "DeviceFailedValidationWarning": "Your device is most likely a counterfeit!" + "DeviceFailedValidationWarning": "Az eszköz valószínűleg nem eredeti!" }, "messagesWarn": { "CJCCalibrationDone": [ - "Calibration", - "done!" + "Kalibráció", + "kész!" ], "ResetOKMessage": "Törlés OK", "SettingsResetMessage": [ @@ -263,9 +263,9 @@ "LOGOTime": { "text2": [ "Boot logo", - "duration" + "megjelenítés" ], - "desc": "Set boot logo duration (s=seconds)" + "desc": "Boot logo megjelenítési idejének beállítása (s=seconds)" }, "AdvancedIdle": { "text2": [ @@ -291,9 +291,9 @@ "CalibrateCJC": { "text2": [ "Calibrate CJC", - "at next boot" + "köv. indításnál" ], - "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" + "desc": "Következő indításnál a hegy Cold Junction Compensation kalibrálása (nem szükséges ha Delta T kisebb mint 5°C)" }, "VoltageCalibration": { "text2": [ From 7a30b043475837473bf5943f5d62690bf1bcdc91 Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Wed, 28 Dec 2022 15:15:13 +0100 Subject: [PATCH 26/35] Update translation_RU.json --- Translations/translation_RU.json | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/Translations/translation_RU.json b/Translations/translation_RU.json index 8af10e03..b544a5b0 100644 --- a/Translations/translation_RU.json +++ b/Translations/translation_RU.json @@ -63,35 +63,35 @@ "Параметры", "питания" ], - "desc": "Настройки питания (от аккумуляторов, QC, PD и т.п." + "desc": "" }, "SolderingMenu": { "text2": [ "Параметры", "пайки" ], - "desc": "Найстроки режимов и паяния, турбо-режима" + "desc": "" }, "PowerSavingMenu": { "text2": [ "Режимы", "сна" ], - "desc": "Режимы сна для экономии питания" + "desc": "" }, "UIMenu": { "text2": [ "Параметры", "интерфейса" ], - "desc": "Настройки интерфейса" + "desc": "" }, "AdvancedMenu": { "text2": [ "Дополнител.", "настройки" ], - "desc": "Дополнительные настройки" + "desc": "" } }, "menuOptions": { @@ -331,7 +331,7 @@ "Язык:", " RU Русский" ], - "desc": "Выбор языка" + "desc": "" } } } From 02a495d44b851658927948c473c203ca0e57c747 Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Thu, 29 Dec 2022 02:36:43 +0100 Subject: [PATCH 27/35] Update Settings.cpp --- source/Core/Src/Settings.cpp | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/Core/Src/Settings.cpp b/source/Core/Src/Settings.cpp index 048d9212..149f8043 100644 --- a/source/Core/Src/Settings.cpp +++ b/source/Core/Src/Settings.cpp @@ -71,7 +71,7 @@ static const SettingConstants settingsConstants[(int)SettingsOptions::SettingsOp {1, POWER_PULSE_WAIT_MAX, 1, POWER_PULSE_WAIT_DEFAULT}, // KeepAwakePulseWait {1, POWER_PULSE_DURATION_MAX, 1, POWER_PULSE_DURATION_DEFAULT}, // KeepAwakePulseDuration {360, 900, 1, VOLTAGE_DIV}, // VoltageDiv - {MIN_TEMP_C, MAX_TEMP_F, 10, BOOST_TEMP}, // BoostTemp + {0, MAX_TEMP_F, 10, BOOST_TEMP}, // BoostTemp {MIN_CALIBRATION_OFFSET, 2500, 1, CALIBRATION_OFFSET}, // CalibrationOffset {0, MAX_POWER_LIMIT, POWER_LIMIT_STEPS, POWER_LIMIT}, // PowerLimit {0, 1, 1, REVERSE_BUTTON_TEMP_CHANGE}, // ReverseButtonTempChangeEnabled From 81e43ee3c8f223bc739ea04a54ee9a7616564b8e Mon Sep 17 00:00:00 2001 From: Dmitry Gribenchuk Date: Thu, 29 Dec 2022 11:12:37 +0200 Subject: [PATCH 28/35] update translation_BE.json translation_PL.json translation_RU.json --- Translations/translation_BE.json | 4 ++-- Translations/translation_PL.json | 4 ++-- Translations/translation_RU.json | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/Translations/translation_BE.json b/Translations/translation_BE.json index d25f5df3..104c0674 100644 --- a/Translations/translation_BE.json +++ b/Translations/translation_BE.json @@ -17,8 +17,8 @@ }, "messagesWarn": { "CJCCalibrationDone": [ - "Calibration", - "done!" + "Каліброўка", + "зроблена!" ], "ResetOKMessage": "Скід OK", "SettingsResetMessage": [ diff --git a/Translations/translation_PL.json b/Translations/translation_PL.json index 761f443b..6ca814fd 100644 --- a/Translations/translation_PL.json +++ b/Translations/translation_PL.json @@ -17,8 +17,8 @@ }, "messagesWarn": { "CJCCalibrationDone": [ - "Calibration", - "done!" + "Kalibracja", + "wykonana!" ], "ResetOKMessage": "Reset OK", "SettingsResetMessage": [ diff --git a/Translations/translation_RU.json b/Translations/translation_RU.json index b544a5b0..2907b776 100644 --- a/Translations/translation_RU.json +++ b/Translations/translation_RU.json @@ -17,8 +17,8 @@ }, "messagesWarn": { "CJCCalibrationDone": [ - "Calibration", - "done!" + "Калибровка", + "завершена!" ], "ResetOKMessage": "Сброс OK", "SettingsResetMessage": [ From 8b556ea068887602af68b840fca9f874c4b85c9a Mon Sep 17 00:00:00 2001 From: Dmitry Gribenchuk Date: Fri, 30 Dec 2022 09:38:51 +0200 Subject: [PATCH 29/35] update translation_BE.json translation_PL.json --- Translations/translation_BE.json | 2 +- Translations/translation_PL.json | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Translations/translation_BE.json b/Translations/translation_BE.json index 104c0674..bd3bfa18 100644 --- a/Translations/translation_BE.json +++ b/Translations/translation_BE.json @@ -289,7 +289,7 @@ "Каліброўка тэмпературы", "пры наступнай загрузцы" ], - "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" + "desc": "Каліброўка тэмпературы пры наступным уключэнні (не патрабуецца, калі розніца тэмператур меньш за 5°C)" }, "VoltageCalibration": { "text2": [ diff --git a/Translations/translation_PL.json b/Translations/translation_PL.json index 6ca814fd..82eb53d3 100644 --- a/Translations/translation_PL.json +++ b/Translations/translation_PL.json @@ -289,7 +289,7 @@ "Kalibracja temperatury", "przy następnym uruchomieniu" ], - "desc": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)" + "desc": "Kalibracja temperatury przy następnym włączeniu (nie jest wymagana, jeśli różnica temperatur jest mniejsza niż 5°C" }, "VoltageCalibration": { "text2": [ From 1b84097e075acf879f3b4d410ee5ca3d7b5055c1 Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Sat, 31 Dec 2022 12:41:00 +0100 Subject: [PATCH 30/35] fixes cooldown flashing (#1515) * unify rate of cooldown flashing * adjusted flashing threshold * revert adjusted flashing threshold * revert follow-up --- source/Core/Threads/OperatingModes/HomeScreen.cpp | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/source/Core/Threads/OperatingModes/HomeScreen.cpp b/source/Core/Threads/OperatingModes/HomeScreen.cpp index 0f9182bd..6ce4116a 100644 --- a/source/Core/Threads/OperatingModes/HomeScreen.cpp +++ b/source/Core/Threads/OperatingModes/HomeScreen.cpp @@ -186,7 +186,7 @@ void drawHomeScreen(bool buttonLockout) { // If we have a tip connected draw the temp, if not we leave it blank if (!tipDisconnectedDisplay) { // draw in the temp - if (!(getSettingValue(SettingsOptions::CoolingTempBlink) && (xTaskGetTickCount() % 260 < 160))) + if (!(getSettingValue(SettingsOptions::CoolingTempBlink) && (xTaskGetTickCount() % 1000 < 300))) gui_drawTipTemp(false, FontStyle::LARGE); // draw in the temp } else { // Draw in missing tip symbol @@ -210,4 +210,4 @@ void drawHomeScreen(bool buttonLockout) { GUIDelay(); } } -} \ No newline at end of file +} From 7fd7873b62e61ac9d455be0ca746791f4183c72e Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Sat, 31 Dec 2022 12:54:45 +0100 Subject: [PATCH 31/35] updated Menu.md (#1512) Update Menu.md --- Documentation/Menu.md | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/Documentation/Menu.md b/Documentation/Menu.md index a8ac4fc5..b9cebe74 100644 --- a/Documentation/Menu.md +++ b/Documentation/Menu.md @@ -39,11 +39,13 @@ To calibrate your iron: 7. Press both buttons at the same time to Save and Exit to the menu ### Calibrate Tip CJC -This performs a Tip Cold Junction Calibration (CJC) ([see Temperature for details](https://ralim.github.io/IronOS/Temperature/)). This is normally not needed unless you have an issue with tip temperature or your tips are wearing out prematurely. Changing tip lengths does not necessarily mean a calibration is needed. Check first that your tips are not defective, and measured resistance is close to specifications (Pinecil/TS100 short tips 6.2 Ω, long tips 8 Ω, TS80(P) ~4.5 Ω). +This calibrates the [Cold Junction Compensation](https://ralim.github.io/IronOS/Temperature/) *(CJC)* for the tip. This is normally not needed unless you have an issue with tip temperature or your tips are wearing out prematurely. Changing tip lengths does not necessarily mean a calibration is needed. Check first that your tips are not defective and measured resistance is close to specifications *[Pinecil / TS100 short tips **6.2 Ω**, long tips **8 Ω**, TS80/P ~**4.5 Ω**]*. -What this is for: some tips have an offset on their readings which causes issues, i.e., the actual temperature of the tip is much higher than displayed. To calibrate this out, perform the following steps. +What this is for:
+Some tips have an offset on their readings which causes issues, i.e. The actual temperature of the tip is much higher than displayed. Follow the steps below to calibrate this. -Caution: if the method below is not followed, the iron could be worse than before calibration. If you need to repeat the method, first unplug and let the handle/PCB cool down to room temperature. +Caution:
+If the method below is not followed, the iron could be worse than before calibration. If you need to repeat the method, first unplug and let the handle/PCB cool down to room temperature. 1. Connect power to your device. 2. Go to **`Advanced Settings`** using (`-/B`) and press (`+/A`) to select it. Use (`-/B`) to scroll to **`Calibrate CJC at next boot`** and confirm with (`+/A`). @@ -52,11 +54,11 @@ Caution: if the method below is not followed, the iron could be worse than befor 4. Unplug you device. 5. **Critical: Make sure a tip is attached & wait until the tip & handle are at room temperature.** (Wait a reasonable amount of time after having used the device.) 6. Power the device and ideally keep it out of your hands (You know it might get warm.). -7. The display shows **`....`** for a short time while the device measures and compares the tip and handle voltages. -8. As a result the new *Offset value* is displayed. This value can later be viewed in the **`Debug menu`**. +7. The display shows **`calibrating ....`** for a short time while the device measures and compares the tip and handle voltages. +8. **`Calibration done!`** is displayed for 3 seconds. The new offset value can later be viewed in the **`Debug menu`**. 9. Calibration is done and the device proceeds booting. -Note: offsets are dependant on your tip, temperature sensor, and the MCU. It's the culmination of tolerances at rest. Typical values are 700-1000 range. This is only designed to be used at boot while cold (ambient room temperature), as temperatures drift apart as soon as power is connected. Doing this reading repeatedly could result in wide varience of the offset number and/or incorrect calibration. +Note: offsets are dependant on your tip, temperature sensor, and the MCU. It's the culmination of tolerances at rest. Typical values are 700-1000 range. This is only designed to be used at boot while cold (ambient / room temperature), as temperatures drift apart as soon as power is connected. Doing this reading repeatedly could result in wide varience of the offset number and/or incorrect calibration. ### Boost mode From 706b3246a1f48e663a6008004b0e4170d3854175 Mon Sep 17 00:00:00 2001 From: "Ben V. Brown" Date: Tue, 3 Jan 2023 18:46:26 +1100 Subject: [PATCH 32/35] Test better reboots --- source/Core/BSP/Pinecil/BSP.cpp | 5 +---- source/Core/BSP/Pinecilv2/BSP.cpp | 3 +-- 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/source/Core/BSP/Pinecil/BSP.cpp b/source/Core/BSP/Pinecil/BSP.cpp index fa7cb267..5bac313d 100644 --- a/source/Core/BSP/Pinecil/BSP.cpp +++ b/source/Core/BSP/Pinecil/BSP.cpp @@ -72,10 +72,7 @@ void unstick_I2C() { uint8_t getButtonA() { return (gpio_input_bit_get(KEY_A_GPIO_Port, KEY_A_Pin) == SET) ? 1 : 0; } uint8_t getButtonB() { return (gpio_input_bit_get(KEY_B_GPIO_Port, KEY_B_Pin) == SET) ? 1 : 0; } -void reboot() { - // Spin for watchdog - for (;;) {} -} +void reboot() { eclic_system_reset(); } void delay_ms(uint16_t count) { delay_1ms(count); } uint32_t __get_IPSR(void) { diff --git a/source/Core/BSP/Pinecilv2/BSP.cpp b/source/Core/BSP/Pinecilv2/BSP.cpp index 0df95956..eb996bd8 100644 --- a/source/Core/BSP/Pinecilv2/BSP.cpp +++ b/source/Core/BSP/Pinecilv2/BSP.cpp @@ -126,8 +126,7 @@ uint8_t getButtonB() { } void reboot() { - // Spin for watchdog - for (;;) {} + hal_system_reset(); } void delay_ms(uint16_t count) { From 7f43562a4f2ccf896bb3cc2eba5fff6862d0049d Mon Sep 17 00:00:00 2001 From: discip <53649486+discip@users.noreply.github.com> Date: Fri, 6 Jan 2023 05:06:03 +0100 Subject: [PATCH 33/35] Reboot after reset (#1513) --- source/Core/Src/settingsGUI.cpp | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/source/Core/Src/settingsGUI.cpp b/source/Core/Src/settingsGUI.cpp index a5b79656..41026292 100644 --- a/source/Core/Src/settingsGUI.cpp +++ b/source/Core/Src/settingsGUI.cpp @@ -719,7 +719,8 @@ static void displayPowerPulseDuration(void) { OLED::printNumber(getSettingValue( static bool setResetSettings(void) { if (userConfirmation(translatedString(Tr->SettingsResetWarning))) { resetSettings(); - warnUser(translatedString(Tr->ResetOKMessage), 10 * TICKS_SECOND); + warnUser(translatedString(Tr->ResetOKMessage), 3 * TICKS_SECOND); + reboot(); } return false; } From e9f63cdfd81b733fe63c8eb5846215379152a115 Mon Sep 17 00:00:00 2001 From: Purdea Andrei Date: Mon, 16 Jan 2023 04:54:34 +0200 Subject: [PATCH 34/35] =?UTF-8?q?Fix=20the=20calibrate=20voltage=20screen,?= =?UTF-8?q?=20when=20it=20exits,=20it=20used=20to=20overlay=20t=E2=80=A6?= =?UTF-8?q?=20(#1530)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the calibrate voltage screen, when it exits, it used to overlay the calibrated divider over the previous displayed image, causing confusion. Now it clears the screen before printing the calibrated value --- source/Core/Src/settingsGUI.cpp | 1 + 1 file changed, 1 insertion(+) diff --git a/source/Core/Src/settingsGUI.cpp b/source/Core/Src/settingsGUI.cpp index 41026292..71612d36 100644 --- a/source/Core/Src/settingsGUI.cpp +++ b/source/Core/Src/settingsGUI.cpp @@ -682,6 +682,7 @@ static bool setCalibrateVIN(void) { case BUTTON_F_LONG: case BUTTON_B_LONG: saveSettings(); + OLED::clearScreen(); OLED::setCursor(0, 0); OLED::printNumber(getSettingValue(SettingsOptions::VoltageDiv), 3, FontStyle::LARGE); OLED::refresh(); From b96dbb237778d531aaf46485e9c9e55338998f66 Mon Sep 17 00:00:00 2001 From: Purdea Andrei Date: Mon, 16 Jan 2023 10:30:37 +0200 Subject: [PATCH 35/35] =?UTF-8?q?Miniware+Pinecil:=20fix=20number=20of=20i?= =?UTF-8?q?tems=20in=20uVtoDegC=20array.=20This=20only=20af=E2=80=A6=20(#1?= =?UTF-8?q?531)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Miniware+Pinecil: fix number of items in uVtoDegC array. This only affects us in case we go above 500degC, in which case we'll be reading invalid memory --- source/Core/BSP/Miniware/ThermoModel.cpp | 2 +- source/Core/BSP/Pinecil/ThermoModel.cpp | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/source/Core/BSP/Miniware/ThermoModel.cpp b/source/Core/BSP/Miniware/ThermoModel.cpp index 1b04bd5f..25376d4e 100644 --- a/source/Core/BSP/Miniware/ThermoModel.cpp +++ b/source/Core/BSP/Miniware/ThermoModel.cpp @@ -125,6 +125,6 @@ const int32_t uVtoDegC[] = { 38137, 500, // }; #endif -const int uVtoDegCItems = sizeof(uVtoDegC) / (2 * sizeof(uint16_t)); +const int uVtoDegCItems = sizeof(uVtoDegC) / (2 * sizeof(uVtoDegC[0])); uint32_t TipThermoModel::convertuVToDegC(uint32_t tipuVDelta) { return Utils::InterpolateLookupTable(uVtoDegC, uVtoDegCItems, tipuVDelta); } diff --git a/source/Core/BSP/Pinecil/ThermoModel.cpp b/source/Core/BSP/Pinecil/ThermoModel.cpp index 846a0a00..fa2cd65d 100644 --- a/source/Core/BSP/Pinecil/ThermoModel.cpp +++ b/source/Core/BSP/Pinecil/ThermoModel.cpp @@ -67,6 +67,6 @@ const int32_t uVtoDegC[] = { }; #endif -const int uVtoDegCItems = sizeof(uVtoDegC) / (2 * sizeof(uint16_t)); +const int uVtoDegCItems = sizeof(uVtoDegC) / (2 * sizeof(uVtoDegC[0])); uint32_t TipThermoModel::convertuVToDegC(uint32_t tipuVDelta) { return Utils::InterpolateLookupTable(uVtoDegC, uVtoDegCItems, tipuVDelta); }