Unified the default configuration/setting values and parameters into one header file.

workspace/TS100/configuration.h

@@ -0,0 +1,99 @@
+#pragma once
+/**
+ * Configuration.h
+ * Define here your default pre settings for TS80 or TS100
+ * 
+ */
+
+//===========================================================================
+//============================= Default Settings ============================
+//===========================================================================
+/**
+ * Default soldering temp is 320.0 C
+ * Temperature the iron sleeps at - default 150.0 C
+ */
+#define SOLDERING_TEMP           320        // Default soldering temp is 320.0 °C
+#define SLEEP_TEMP               150        // Default sleep temperature
+#define BOOST_TEMP               420        // Default boost temp. 
+#define BOOST_MODE_ENABLED       0          // 0: Disable 1: Enable
+
+/**
+ * Blink the temperature on the cooling screen when its > 50C 
+ */
+#define COOLING_TEMP_BLINK       1          // 0: Disable 1: Enable
+
+/**
+ * How many seconds/minutes we wait until going to sleep/shutdown.
+ * Values -> SLEEP_TIME * 10; i.e. 5*10 = 50 Seconds! 
+ */
+#define SLEEP_TIME                5         // x10 Seconds
+#define SHUTDOWN_TIME            10         // Minutes
+
+/**
+ * Auto start off for safety.
+ * Pissible values are:  
+ *  0 - none 
+ *  1 - Soldering Temperature
+ *  2 - Sleep Temperature 
+ *  3 - Sleep Off Temperature 
+ */
+#define AUTO_START_MODE           0         // Default to none
+
+/**
+ * OLED Orientation
+ * 
+ */
+#define ORIENTATION_MODE            0         // 0: Right 1:Left 2:Automatic - Default right
+#define IN_LEFT_HANDED_MODE         0         // 0:FALSE 1:TRUE - Default false
+
+/**
+ * OLED Orientation Sensitivity on Automatic mode!
+ * Motion Sensitivity <0=Off 1=Least Sensitive 9=Most Sensitive>
+ */
+#define SENSITIVITY               7         // Default 7
+
+/**
+ * Detailed soldering screen
+ * Detailed idle screen (off for first time users)
+ */
+#define DETAILED_SOLDERING        0         // 0: Disable 1: Enable - Default 0
+#define DETAILED_IDLE             0         // 0: Disable 1: Enable - Default 0
+
+
+#define CUT_OUT_SETTING           0         // default to no cut-off voltage (or 18W for TS80)
+#define TEMPERATURE_INF           0         // default to 0
+#define DESCRIPTION_SCROLL_SPEED  0         // 0: Slow 1: Fast - default to slow
+#define POWER_LIMIT_ENABLE        0         // 0: Disable 1: Enable - Default disabled power limit
+
+#ifdef MODEL_TS100
+  #define VOLTAGE_DIV             467       // 467 - Default divider from schematic
+  #define CALIBRATION_OFFSET      900       // 900 - Default adc offset in uV
+  #define PID_POWER_LIMIT         70        // Sets the max pwm power limit
+  #define POWER_LIMIT             65        // 30 watts default limit
+  #define MAX_POWER_LIMIT         65        //
+  #define POWER_LIMIT_STEPS        5        //
+  
+  /**
+   *  TIP_GAIN =  TIP_GAIN/1000 == uV per deg C constant of the tip
+   */
+  #define OP_AMP_Rf               750*1000  // 750  Kilo-ohms -> From schematic, R1
+  #define OP_AMP_Rin              2370      // 2.37 Kilo-ohms -> From schematic, R2
+  #define TIP_GAIN                405
+
+#endif
+
+#ifdef MODEL_TS80
+  #define VOLTAGE_DIV             780       // Default divider from schematic
+  #define PID_POWER_LIMIT         24        // Sets the max pwm power limit
+  #define CALIBRATION_OFFSET      900       // the adc offset in uV
+  #define POWER_LIMIT             24        // 24 watts default power limit
+  #define MAX_POWER_LIMIT         30        //
+  #define POWER_LIMIT_STEPS       2
+
+  /**
+   *  TIP_GAIN =  TIP_GAIN/1000 == uV per deg C constant of the tip
+   */
+  #define OP_AMP_Rf               180*1000  //  180  Kilo-ohms -> From schematic, R6
+  #define OP_AMP_Rin              2000      //  2.0  Kilo-ohms -> From schematic, R3
+  #define TIP_GAIN                115
+#endif