mirror of
https://github.com/Ralim/IronOS.git
synced 2025-02-26 07:53:55 +00:00
286afad919
* Mock S60 * cleanup * Start refactor of OLED init * Setup timers roughly * Set Vector table offset correctly Update system_stm32f1xx.c * Update OLED.cpp * Update stm32f1xx_hal_msp.c * Update configuration.h * I2C init before GPIO From Errata Update stm32f1xx_hal_msp.c Update Software_I2C.h Allow no hardware I2C * I2C BB run bus unlock at init * cleanups * Software I2C for now * Mildly more graceful Interpolate * Handle is powered by DC Update Power.cpp Update drawPowerSourceIcon.cpp Update configuration.h Update Setup.cpp * Cleanup HomeScreen * Segment remap oled at init * Cleanup * Update MOVThread.cpp * Fix PWM Init * Fix adc2 trigger * Update configs * Fixup warning * Saner default config * Update ThermoModel.cpp * Util for current@voltage * Hub238 warning * Add hub238 handling in power mode * Update USBPDDebug_FUSB.cpp * HUSB238 debug * Hook PSU Limit * Use wrapping section of GRAM for scroll Update OLED.hpp * Update NTC table * Fix HUB voltage picker * Cleanup * Larger tip filter * Calibrate in a bunch closer Update ThermoModel.cpp * Update configuration.h * Update HUB238.cpp * Update configuration.h * Movement Pin * Update BSP.cpp * tim2 irq * Rough timer conversion (adc broken) but movement working * Fix tim2 start * Faster base PWM * Ensure utils grabs config * Add wattage limiter tolerance for device * Speed up PWM and enable PWM current limiting * tune for 12v * Prevent start until PD done * Update configuration.h * Add HUB238 check for have re-negotiated * Adjust timer to avoid noise when its possible
30 lines
1.2 KiB
C++
30 lines
1.2 KiB
C++
|
|
#ifndef DRIVERS_USBPD_H_
|
|
#define DRIVERS_USBPD_H_
|
|
#include "configuration.h"
|
|
#include <stdbool.h>
|
|
#include <stdint.h>
|
|
|
|
#ifdef __cplusplus
|
|
#ifdef POW_PD
|
|
class USBPowerDelivery {
|
|
public:
|
|
static bool start(); // Start the PD stack
|
|
static bool negotiationComplete(); // Has negotiation completed to a voltage > 5v
|
|
static bool negotiationInProgress(); // Is negotiation ongoing
|
|
static bool fusbPresent(); // Is the FUSB302 present on the bus
|
|
static void PPSTimerCallback(); // PPS Timer
|
|
static void IRQOccured(); // Thread callback that an irq occured
|
|
static void step(); // Iterate the step machine
|
|
static bool negotiationHasWorked(); // Has PD negotiation worked (are we in a PD contract)
|
|
static uint8_t getStateNumber(); // Debugging - Get the internal state number
|
|
static bool isVBUSConnected(); // Is the VBus pin connected on the FUSB302
|
|
static uint32_t *getLastSeenCapabilities(); // returns pointer to the last seen capabilities from the powersource
|
|
private:
|
|
//
|
|
static int detectionState;
|
|
};
|
|
#endif
|
|
|
|
#endif
|
|
#endif |