mirror of
https://github.com/Ralim/IronOS.git
synced 2025-02-26 07:53:55 +00:00
9ea71bc4d2
* Basic Init * Rought implementation of fs2711 usb pd interface * Rought implementation of fs2711 usb pd interface * Still needs work overcurrent protection keeps getting tripped * New pdo selection logic * Update push.yml * Update push.yml * Update push.yml * Update Makefile * Adds PPS * Removed unused define * Adds PPS * Apply suggestions from code review Co-authored-by: Ben V. Brown <5425387+Ralim@users.noreply.github.com> * Code review changes * Added osDelay include * New line alignment for S60 softwarei2c * Code review * Fixes code review stuff * code review changes * Change voltage limit to 20 as that's what the device is rated for * Shortened wait time for usb pd * Fixed issues that cuase S60P to restart constantly * fixing minimal OLED brightness With the current settings, the OLED turns off if the first level is selected. * Adds protocol to s60p debug menu * loosened fs2711 protocol selection timing * Adds PDO register reading to negotiation logic * Fixes FS2711 timeout issue and cleans up driver * Adds FS2711 protocol negotiation to power loop * Removed uneeded define * Reverts changes to Font.h and adds clang-format comments --------- Co-authored-by: Ben V. Brown <Ralim@Ralimtek.com> Co-authored-by: discip <53649486+discip@users.noreply.github.com> Co-authored-by: Ben V. Brown <5425387+Ralim@users.noreply.github.com>
74 lines
2.3 KiB
C
74 lines
2.3 KiB
C
#ifndef _FS2711_DEFINE_HPP_
|
|
#define _FS2711_DEFINE_HPP_
|
|
|
|
#define FS2711_WRITE_ADDR 0x5A
|
|
#define FS2711_READ_ADDR 0x5B
|
|
|
|
#define FS2711_ADDR 0x5A
|
|
|
|
#define FS2711_PDO_FIX 0
|
|
#define FS2711_PDO_PPS 1
|
|
|
|
#define FS2711_MAX_5V 1
|
|
#define FS2711_MAX_9V 3
|
|
#define FS2711_MAX_12V 7
|
|
#define FS2711_MAX_20V 15
|
|
|
|
#define FS2711_ENABLE 0x1
|
|
#define FS2711_DISABLE 0x2
|
|
|
|
// Protocol Selection
|
|
#define FS2711_PROTOCOL_QC2A 4
|
|
#define FS2711_PROTOCOL_QC2B 5
|
|
#define FS2711_PROTOCOL_QC3A 6
|
|
#define FS2711_PROTOCOL_QC3B 7
|
|
#define FS2711_PROTOCOL_PPS 20
|
|
#define FS2711_PROTOCOL_PD 21
|
|
|
|
#define FS2711_PROTOCOL_PPS_CURRENT 0xDE
|
|
|
|
#define FS2711_PROTOCOL_QC_MAX_VOLT 0xC0
|
|
|
|
#define FS2711_REG_SCAN_START 0x40 // Protocol Scan
|
|
#define FS2711_REG_ENABLE_PROTOCOL 0x41 // Enable Protocol
|
|
#define FS2711_REG_SELECT_PROTOCOL 0x42 // Select Protocol
|
|
#define FS2711_REG_ENABLE_VOLTAGE 0x43 // Enable Voltage
|
|
#define FS2711_REG_PDO_IDX 0x46 // Requests Protocol Index
|
|
#define FS2711_REG_SWEEP 0x47 // Requests a voltage sweep?
|
|
#define FS2711_REG_PORT_RESET 0x49 // Port Reset
|
|
#define FS2711_REG_SYSTEM_RESET 0x4A // System Reset
|
|
#define FS2711_REG_DPDM 0x51 // DPDM
|
|
#define FS2711_REG_MODE_SET 0xA0 // Mode set
|
|
#define FS2711_REG_STATE0 0xB1 // PD:A_SNK PD:A_SRC (PD:pe_ready POM:crc_success) (PD:soft_reset POM:crc_fail) (PD:hard_rest POM:resp_fail) PD:hardreset_found VIVO
|
|
#define FS2711_REG_STATE1 0xB2 // scan_done pdo_updated vooc_recv_cmd vivo_pom_tx_finish vivo_pom_rx_finish huawei_comm_fail huawei_op_finish
|
|
|
|
// Used to calculate PDO Objects
|
|
#define FS2711_REG_PDO_B0 0xC0
|
|
#define FS2711_REG_PDO_B1 0xC1
|
|
#define FS2711_REG_PDO_B2 0xC2
|
|
#define FS2711_REG_PDO_B3 0xC3
|
|
|
|
#define FS2711_REG_VOLT_CFG_B0 0xF4
|
|
#define FS2711_REG_VOLT_CFG_B1 0xF5
|
|
#define FS2711_REG_VOLT_CFG_B2 0xF6
|
|
#define FS2711_REG_VOLT_CFG_B3 0xF7
|
|
|
|
// 0xF0 ~ 0xF1 16 bits
|
|
#define FS2711_REG_MASK 0xF0
|
|
// 0xF4 ~ 0xF7 32 bits
|
|
#define FS2711_REG_PROTOCOL_VOLT 0xF4
|
|
// 0xF8 ~ 0xFB 24 bits
|
|
#define FS2711_REG_PROTOCOL_EXISTS 0xF8
|
|
|
|
#define FS2711_SWEEP_SAW 0
|
|
#define FS2711_SWEEP_TRI 1
|
|
#define FS2711_SWEEP_STEP 2
|
|
|
|
#define FS2711_STATE_SCAN_DONE 0x01
|
|
#define FS2711_STATE_PDO_UPDATE 0x02
|
|
#define FS2711_STATE_PD_SNK 0x40
|
|
#define FS2711_STATE_PD_SRC 0x80
|
|
#define FS2711_STATE_PD_PE_READY 0x100
|
|
#define FS2711_STATE_DISABLE 0x800
|
|
#endif
|