mirror of
https://github.com/Ralim/IronOS.git
synced 2025-02-26 07:53:55 +00:00
899 lines
53 KiB
C
899 lines
53 KiB
C
/*
|
||
* Translation.c
|
||
*
|
||
* Created on: 31Aug.,2017
|
||
* Author: Ben V. Brown
|
||
*/
|
||
#include "Translation.h"
|
||
|
||
// TEMPLATES for short names - choose one and use it as base for your translation:
|
||
|
||
//const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||
//const char* SettingsShortNames[16][2] = {
|
||
// /* (<= 5) Power source (DC or batt) */ {"PWRSC"},
|
||
// /* (<= 4) Sleep temperature */ {"STMP"},
|
||
// /* (<= 4) Sleep timeout */ {"STME"},
|
||
// /* (<= 5) Shutdown timeout */ {"SHTME"},
|
||
// /* (<= 6) Motion sensitivity level */ {"MSENSE"},
|
||
// /* (<= 6) Temperature in F and C */ {"TMPUNT"},
|
||
// /* (<= 6) Advanced idle display mode enabled */ {"ADVIDL"},
|
||
// /* (<= 6) Display rotation mode */ {"DSPROT"},
|
||
// /* (<= 6) Boost enabled */ {"BOOST"},
|
||
// /* (<= 4) Boost temperature */ {"BTMP"},
|
||
// /* (<= 6) Automatic start mode */ {"ASTART"},
|
||
// /* (<= 6) Cooldown blink */ {"CLBLNK"},
|
||
// /* (<= 8) Temperature calibration enter menu */ {"TMP CAL?"},
|
||
// /* (<= 8) Settings reset command */ {"RESET?"},
|
||
// /* (<= 8) Calibrate input voltage */ {"CAL VIN?"},
|
||
// /* (<= 6) Advanced soldering screen enabled */ {"ADVSLD"},
|
||
//};
|
||
|
||
//const enum ShortNameType SettingsShortNameType = SHORT_NAME_DOUBLE_LINE;
|
||
//const char* SettingsShortNames[16][2] = {
|
||
// /* (<= 11) Power source (DC or batt) */ {"Power", "source"},
|
||
// /* (<= 9) Sleep temperature */ {"Sleep", "temp"},
|
||
// /* (<= 9) Sleep timeout */ {"Sleep", "timeout"},
|
||
// /* (<= 11) Shutdown timeout */ {"Shutdown", "timeout"},
|
||
// /* (<= 13) Motion sensitivity level */ {"Motion", "sensitivity"},
|
||
// /* (<= 13) Temperature in F and C */ {"Temperature", "units"},
|
||
// /* (<= 13) Advanced idle display mode enabled */ {"Detailed", "idle screen"},
|
||
// /* (<= 13) Display rotation mode */ {"Display", "orientation"},
|
||
// /* (<= 13) Boost enabled */ {"Boost mode", "enabled"},
|
||
// /* (<= 9) Boost temperature */ {"Boost", "temp"},
|
||
// /* (<= 13) Automatic start mode */ {"Auto", "start"},
|
||
// /* (<= 13) Cooldown blink */ {"Cooldown", "blink"},
|
||
// /* (<= 16) Temperature calibration enter menu */ {"Calibrate", "temperature?"},
|
||
// /* (<= 16) Settings reset command */ {"Factory", "Reset?"},
|
||
// /* (<= 16) Calibrate input voltage */ {"Calibrate", "input voltage?"},
|
||
// /* (<= 13) Advanced soldering screen enabled */ {"Detailed", "solder screen"},
|
||
//};
|
||
|
||
#ifdef LANG_EN
|
||
const char* SettingsLongNames[16] =
|
||
{
|
||
// These are all the help text for all the settings.
|
||
// No requirements on spacing or length.
|
||
/* Power source (DC or batt) */"Power source. Sets cutoff voltage. <DC 10V> <S 3.3V per cell>",
|
||
/* Sleep temperature */"Sleep Temperature <C>",
|
||
/* Sleep timeout */"Sleep Timeout <Minutes/Seconds>",
|
||
/* Shutdown timeout */"Shutdown Timeout <Minutes>",
|
||
/* Motion sensitivity level */"Motion Sensitivity <0.Off 1.least sensitive 9.most sensitive>",
|
||
/* Temperature in F and C */"Temperature Unit <C=Celsius F=Fahrenheit>",
|
||
/* Advanced idle display mode enabled */"Display detailed information in a smaller font on the idle screen.",
|
||
/* Display rotation mode */"Display Orientation <A. Automatic L. Left Handed R. Right Handed>",
|
||
/* Boost enabled */"Enable front key enters boost mode 450C mode when soldering",
|
||
/* Boost temperature */"Temperature when in \"boost\" mode",
|
||
/* Automatic start mode */"Automatically starts the iron into soldering on power up. T=Soldering, S= Sleep mode,F=Off",
|
||
/* Cooldown blink */"Blink the temperature on the cooling screen while the tip is still hot.",
|
||
/* Temperature calibration enter menu */"Calibrate tip offset.",
|
||
/* Settings reset command */"Reset all settings",
|
||
/* Calibrate input voltage */"VIN Calibration. Buttons adjust, long press to exit",
|
||
/* Advanced soldering screen enabled */"Display detailed information while soldering", };
|
||
|
||
const char* SettingsCalibrationWarning =
|
||
"Please ensure the tip is at room temperature before continuing!";
|
||
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
|
||
const char* SleepingSimpleString = "Zzzz"; // Must be <= 4 chars
|
||
const char* SleepingAdvancedString = "Sleeping..."; // <=17 chars
|
||
const char* WarningSimpleString = "HOT!"; //Must be <= 4 chars
|
||
const char* WarningAdvancedString = "WARNING! TIP HOT!";
|
||
|
||
const char SettingTrueChar = 'T';
|
||
const char SettingFalseChar = 'F';
|
||
const char SettingRightChar = 'R';
|
||
const char SettingLeftChar = 'L';
|
||
const char SettingAutoChar = 'A';
|
||
|
||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_DOUBLE_LINE;
|
||
const char* SettingsShortNames[16][2] = {
|
||
/* (<= 11) Power source (DC or batt) */{ "Power", "source" },
|
||
/* (<= 9) Sleep temperature */{ "Sleep", "temp" },
|
||
/* (<= 9) Sleep timeout */{ "Sleep", "timeout" },
|
||
/* (<= 11) Shutdown timeout */{ "Shutdown", "timeout" },
|
||
/* (<= 13) Motion sensitivity level */{ "Motion", "sensitivity" },
|
||
/* (<= 13) Temperature in F and C */{ "Temperature", "units" },
|
||
/* (<= 13) Advanced idle display mode enabled */{ "Detailed", "idle screen" },
|
||
/* (<= 13) Display rotation mode */{ "Display", "orientation" },
|
||
/* (<= 13) Boost enabled */{ "Boost mode", "enabled" },
|
||
/* (<= 9) Boost temperature */{ "Boost", "temp" },
|
||
/* (<= 13) Automatic start mode */{ "Auto", "start" },
|
||
/* (<= 13) Cooldown blink */{ "Cooldown", "blink" },
|
||
/* (<= 16) Temperature calibration enter menu */{ "Calibrate", "temperature?" },
|
||
/* (<= 16) Settings reset command */{ "Factory", "Reset?" },
|
||
/* (<= 16) Calibrate input voltage */{ "Calibrate", "input voltage?" },
|
||
/* (<= 13) Advanced soldering screen enabled */{ "Detailed", "solder screen" },
|
||
};
|
||
#endif
|
||
|
||
#ifdef LANG_RU
|
||
const char* SettingsLongNames[16] = {
|
||
// These are all the help text for all the settings.
|
||
// No requirements on spacing or length.
|
||
/* Power source (DC or batt) */"Источник питания. Установка напряжения отключения. <DC 10V> <S 3.3 V на батарею>",
|
||
/* Sleep temperature */"Температура режима ожидания <С>",
|
||
/* Sleep timeout */"Время до перехода в режим ожидания <Минуты>",
|
||
/* Shutdown timeout */"Время до отключения <Минуты>",
|
||
/* Motion sensitivity level */"Акселерометр <0. Выкл. 1. мин. чувствительный 9. макс. чувствительный>",
|
||
/* Temperature in F and C */"В чем измерять температуру",
|
||
/* Advanced idle display mode enabled */"Показывать детальную информацию маленьким шрифтом на домашнем экране",
|
||
/* Display rotation mode */"Ориентация дисплея <A. Автоматический, Л. Левая рука, П. Правая рука>",
|
||
/* Boost enabled */"Турбо-режим при удержании кнопки А при пайке ",
|
||
/* Boost temperature */"Температура в турбо-режиме",
|
||
/* Automatic start mode */"Автоматический запуск паяльника при включении питания. T=Нагрев, S=Режим ожидания,F=Выкл.",
|
||
/* Cooldown blink */"Показывать температуру на экране охлаждения, пока жало остается горячим.",
|
||
/* Temperature calibration enter menu */"Калибровка термодатчика.",
|
||
/* Settings reset command */"Сброс всех настроек.",
|
||
/* Calibrate input voltage */"Калибровка напряжения входа. Настройка кнопками, нажать и удержать чтобы завершить.",
|
||
/* Advanced soldering screen enabled */"Показывать детальную информацию при пайке.",
|
||
};
|
||
|
||
const char* SettingsCalibrationWarning = "Убедитесь, что жало остыло до комнатной температуры, прежде чем продолжать!";
|
||
const char* UVLOWarningString = "БАТ РАЗР"; //Fixed width 8 chars
|
||
const char* SleepingSimpleString = "Хррр";// Must be <= 4 chars
|
||
const char* SleepingAdvancedString = "Ожидание...";// <=17 chars
|
||
const char* WarningSimpleString = " АЙ!";//Must be <= 4 chars
|
||
const char* WarningAdvancedString = "ОСТОРОЖНО! ГОРЯЧО";
|
||
|
||
const char SettingTrueChar = '+';
|
||
const char SettingFalseChar = '-';
|
||
/*
|
||
* #TODO change support for multibyte constants here
|
||
const char SettingRightChar = 'П';
|
||
const char SettingLeftChar = 'Л';
|
||
const char SettingAutoChar = 'A';*/
|
||
|
||
const char SettingRightChar = 'R';
|
||
const char SettingLeftChar = 'L';
|
||
const char SettingAutoChar = 'A';
|
||
|
||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||
const char* SettingsShortNames[16][2] = {
|
||
/* (<= 5) Power source (DC or batt) */{"ИстП "},
|
||
/* (<= 4) Sleep temperature */{"Тожд"},
|
||
/* (<= 4) Sleep timeout */{"Вожд "},
|
||
/* (<= 5) Shutdown timeout */{"Тоткл "},
|
||
/* (<= 6) Motion sensitivity level */{"ЧувсДв "},
|
||
/* (<= 6) Temperature in F and C */{"ЕдТемп "},
|
||
/* (<= 6) Advanced idle display mode enabled */{"ИнфОжд "},
|
||
/* (<= 6) Display rotation mode */{"ПовЭкр "},
|
||
/* (<= 6) Boost enabled */{"Турбо "},
|
||
/* (<= 4) Boost temperature */{"Ттур "},
|
||
/* (<= 6) Automatic start mode */{"Астарт"},
|
||
/* (<= 6) Cooldown blink */{"Охлажд "},
|
||
/* (<= 8) Temperature calibration enter menu */{"КалибрТ"},
|
||
/* (<= 8) Settings reset command */{"СБРОС?"},
|
||
/* (<= 8) Calibrate input voltage */{"КалибрU?"},
|
||
/* (<= 6) Advanced soldering screen enabled */{"ИнфПай "},
|
||
};
|
||
#endif
|
||
|
||
#ifdef LANG_ES
|
||
const char* SettingsLongNames[16] = {
|
||
// These are all the help text for all the settings.
|
||
// No requirements on spacing or length.
|
||
/* Power source (DC or batt) */"Fuente de energía. Ajusta el límite inferior de voltaje. <DC=10V S=3.3V por celda>",
|
||
/* Sleep temperature */"Temperatura en reposo. <C>",
|
||
/* Sleep timeout */"Tiempo hasta activar reposo. <Minutos>",
|
||
/* Shutdown timeout */"Tiempo hasta apagado. <Minutos>",
|
||
/* Motion sensitivity level */"Sensibilidad del movimiento. <0=Apagado 1=El menos sensible 9=El más sensible>",
|
||
/* Temperature in F and C */"Unidad de temperatura.",
|
||
/* Advanced idle display mode enabled */"Display detailed information in a smaller font on the idle screen.",
|
||
/* Display rotation mode */"Orientación de la pantalla <A=Automático I=Mano izquierda D=Mano derecha>",
|
||
/* Boost enabled */"Activar el botón \"Boost\" en modo soldadura.",
|
||
/* Boost temperature */"Temperatura en modo \"Boost\". <C>",
|
||
/* Automatic start mode */"Iniciar modo soldadura en el encendido. <V=Sí S=Modo reposo F=No>",
|
||
/* Cooldown blink */"Parpadea la temperatura en el enfriamiento si la punta sigue caliente."
|
||
/* Temperature calibration enter menu */"Calibrate tip offset.",
|
||
/* Settings reset command */"Reset all settings",
|
||
/* Calibrate input voltage */"VIN Calibration. Buttons adjust, long press to exit",
|
||
/* Advanced soldering screen enabled */"Display detailed information while soldering",
|
||
};
|
||
|
||
const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
|
||
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
|
||
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
|
||
const char* SleepingAdvancedString = "Sleeping...";// <=17 chars
|
||
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
|
||
const char* WarningAdvancedString = "WARNING! TIP HOT!";
|
||
|
||
const char SettingTrueChar = 'T';
|
||
const char SettingFalseChar = 'F';
|
||
const char SettingRightChar = 'R';
|
||
const char SettingLeftChar = 'L';
|
||
const char SettingAutoChar = 'A';
|
||
|
||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||
const char* SettingsShortNames[16][2] = {
|
||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||
/* (<= 4) Sleep temperature */{"STMP"},
|
||
/* (<= 4) Sleep timeout */{"STME"},
|
||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||
/* (<= 6) Boost enabled */{"BOOST"},
|
||
/* (<= 4) Boost temperature */{"BTMP"},
|
||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||
/* (<= 8) Settings reset command */{"RESET?"},
|
||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||
};
|
||
#endif
|
||
|
||
#ifdef LANG_SE
|
||
const char* SettingsLongNames[16] = {
|
||
// These are all the help text for all the settings.
|
||
// No requirements on spacing or length.
|
||
/* Power source (DC or batt) */"Источник питания. Установка напряжения отключения. <DC 10V> <S 3.3 V на батарею>",
|
||
/* Sleep temperature */"Температура Сна <С>",
|
||
/* Sleep timeout */"Переход в режим Сна <Минуты>",
|
||
/* Shutdown timeout */"Переходит в режим ожидания <Минуты>",
|
||
/* Motion sensitivity level */"Акселерометр <0. Выкл. 1. мин. чувствительный 9. макс. чувствительный>",
|
||
/* Temperature in F and C */"В чем измерять температуру",
|
||
/* Advanced idle display mode enabled */"Display detailed information in a smaller font on the idle screen.",
|
||
/* Display rotation mode */"Ориентация Дисплея <A. Автоматический L. Левая Рука R. Правая Рука>",
|
||
/* Boost enabled */"Активация кнопки A для Турбо режима до 450С при пайке ",
|
||
/* Boost temperature */"Установка температуры для Турбо режима",
|
||
/* Automatic start mode */"Автоматический запуск паяльника при включении питания. T=Нагрев, S= Режим Сна,F=Выкл.",
|
||
/* Cooldown blink */"Мигает температура на экране охлаждения, пока жало остается горячим."
|
||
/* Temperature calibration enter menu */"Calibrate tip offset.",
|
||
/* Settings reset command */"Reset all settings",
|
||
/* Calibrate input voltage */"VIN Calibration. Buttons adjust, long press to exit",
|
||
/* Advanced soldering screen enabled */"Display detailed information while soldering",
|
||
};
|
||
|
||
const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
|
||
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
|
||
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
|
||
const char* SleepingAdvancedString = "Sleeping...";// <=17 chars
|
||
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
|
||
const char* WarningAdvancedString = "WARNING! TIP HOT!";
|
||
|
||
const char SettingTrueChar = 'T';
|
||
const char SettingFalseChar = 'F';
|
||
const char SettingRightChar = 'R';
|
||
const char SettingLeftChar = 'L';
|
||
const char SettingAutoChar = 'A';
|
||
|
||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||
const char* SettingsShortNames[16][2] = {
|
||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||
/* (<= 4) Sleep temperature */{"STMP"},
|
||
/* (<= 4) Sleep timeout */{"STME"},
|
||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||
/* (<= 6) Boost enabled */{"BOOST"},
|
||
/* (<= 4) Boost temperature */{"BTMP"},
|
||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||
/* (<= 8) Settings reset command */{"RESET?"},
|
||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||
};
|
||
#endif
|
||
|
||
#ifdef LANG_IT
|
||
const char* SettingsLongNames[16] = {
|
||
// These are all the help text for all the settings.
|
||
// No requirements on spacing or length.
|
||
/* Power source (DC or batt) */"Sorgente di alimentazione; imposta il limite minimo di tensione <DC: 10V; S: 3.3V per cella>",
|
||
/* Sleep temperature */"Temperatura standby <°C>",
|
||
/* Sleep timeout */"Timeout standby <minuti/secondi>",
|
||
/* Shutdown timeout */"Timeout spegnimento <minuti>",
|
||
/* Motion sensitivity level */"Sensibilità al movimento <0: nessuna; 1: minima; 9: massima>",
|
||
/* Temperature in F and C */"Unità di misura della temperatura <C: Celsius; F: Farenheit>",
|
||
/* Advanced idle display mode enabled */"Mostra informazioni dettagliate con un carattere più piccolo sulla schermata di inattività",
|
||
/* Display rotation mode */"Orientamento del display <A: automatico; S: mano sinistra; D: mano destra>",
|
||
/* Boost enabled */"Il tasto anteriore attiva la modalità \"boost\" durante la saldatura",
|
||
/* Boost temperature */"Temperatura in modalità \"boost\"",
|
||
/* Automatic start mode */"Attiva automaticamente il saldatore quando viene alimentato <A: saldatura; S: standby; D: disattiva>",
|
||
/* Cooldown blink */"Durante il raffreddamento mostra la temperatura sul display se la punta è ancora calda"
|
||
/* Temperature calibration enter menu */"Calibra l'offset della punta",
|
||
/* Settings reset command */"Ripristina tutte le impostazioni",
|
||
/* Calibrate input voltage */"Calibra la tensione in entrata; regola con i bottoni, tieni permuto per uscire",
|
||
/* Advanced soldering screen enabled */"Mostra informazioni dettagliate mentre stai saldando",
|
||
};
|
||
|
||
const char* SettingsCalibrationWarning = "Assicurati che la punta si trovi a temperatura ambiente prima di continuare!";
|
||
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
|
||
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
|
||
const char* SleepingAdvancedString = "Standby";// <=17 chars
|
||
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
|
||
const char* WarningAdvancedString = "ATTENZIONE! PUNTA CALDA!";
|
||
|
||
const char SettingTrueChar = 'A';
|
||
const char SettingFalseChar = 'D';
|
||
const char SettingRightChar = 'D';
|
||
const char SettingLeftChar = 'S';
|
||
const char SettingAutoChar = 'A';
|
||
|
||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||
const char* SettingsShortNames[16][2] = {
|
||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||
/* (<= 4) Sleep temperature */{"STMP"},
|
||
/* (<= 4) Sleep timeout */{"STME"},
|
||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||
/* (<= 6) Boost enabled */{"BOOST"},
|
||
/* (<= 4) Boost temperature */{"BTMP"},
|
||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||
/* (<= 8) Settings reset command */{"RESET?"},
|
||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||
};
|
||
#endif
|
||
|
||
#ifdef LANG_FR
|
||
const char* SettingsLongNames[16] = {
|
||
// These are all the help text for all the settings.
|
||
// No requirements on spacing or length.
|
||
/* Power source (DC or batt) */"Type d\'alimentation. Regle la tension de coupure. <DC=10V S=3.3V par cellules>",
|
||
/* Sleep temperature */"Temperature en veille. <C>",
|
||
/* Sleep timeout */"Temps avant mise en veille. <Minutes>",
|
||
/* Shutdown timeout */"Temps avant extinction. <Minutes>",
|
||
/* Motion sensitivity level */"Sensibilitee du capteur de mouvement. <0=Inactif 1=Peu sensible 9=Tres sensible>",
|
||
/* Temperature in F and C */"Unitee de temperature.",
|
||
/* Advanced idle display mode enabled */"Afficher des informations detaillees en petit lors de la veille",
|
||
/* Display rotation mode */"Orientation de l\'affichage. <A=Automatique G=Gaucher D=Droitier>",
|
||
/* Boost enabled */"Active le mode \"Boost\" 450C sur le bouton de devant pendant la soudure.",
|
||
/* Boost temperature */"Temperature du mode \"Boost\". <C>",
|
||
/* Automatic start mode */"Demarre automatiquement la soudure a l\'allumage. <A=Active, V=Mode Veille, D=Desactive>",
|
||
/* Cooldown blink */"Fait clignotter la temperature lors du refroidissement pendant que la panne est chaude."
|
||
/* Temperature calibration enter menu */"Compenser l\'erreur de la panne",
|
||
/* Settings reset command */"Reinitialiser tout les reglages",
|
||
/* Calibrate input voltage */"Calibration VIN. Boutons pour ajuster, appui long pour quitter",
|
||
/* Advanced soldering screen enabled */"Afficher des informations detaillees pendant la soudure",
|
||
};
|
||
|
||
const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
|
||
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
|
||
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
|
||
const char* SleepingAdvancedString = "Sleeping...";// <=17 chars
|
||
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
|
||
const char* WarningAdvancedString = "WARNING! TIP HOT!";
|
||
|
||
const char SettingTrueChar = 'T';
|
||
const char SettingFalseChar = 'F';
|
||
const char SettingRightChar = 'R';
|
||
const char SettingLeftChar = 'L';
|
||
const char SettingAutoChar = 'A';
|
||
|
||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||
const char* SettingsShortNames[16][2] = {
|
||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||
/* (<= 4) Sleep temperature */{"STMP"},
|
||
/* (<= 4) Sleep timeout */{"STME"},
|
||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||
/* (<= 6) Boost enabled */{"BOOST"},
|
||
/* (<= 4) Boost temperature */{"BTMP"},
|
||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||
/* (<= 8) Settings reset command */{"RESET?"},
|
||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||
};
|
||
#endif
|
||
|
||
#ifdef LANG_DE
|
||
const char* SettingsLongNames[16] = {
|
||
// These are all the help text for all the settings.
|
||
// No requirements on spacing or length.
|
||
/* Power source (DC or batt) */"Spannungsquelle (Abschaltspannung) <DC=10V, nS=n*3.3V für n LiIon-Zellen>",
|
||
/* Sleep temperature */"Ruhetemperatur (In der eingestellten Einheit)",
|
||
/* Sleep timeout */"Ruhemodus nach <Sekunden/Minuten>",
|
||
/* Shutdown timeout */"Abschaltzeit <Minuten>",
|
||
/* Motion sensitivity level */"Bewegungsempfindlichkeit <0=Aus, 1=Minimal ... 9=Maximal>",
|
||
/* Temperature in F and C */"Temperatureinheit <C=Celsius, F=Fahrenheit>",
|
||
/* Advanced idle display mode enabled */"Detaillierte Anzeige im Ruhemodus <T=An, F=Aus>",
|
||
/* Display rotation mode */"Ausrichtung der Anzeige <A=Auto, L=Linkshändig, R=Rechtshändig>",
|
||
/* Boost enabled */"Vordere Taste für Temperaturboost verwenden <T=An, F=Aus>",
|
||
/* Boost temperature */"Temperatur im Boostmodus (In der eingestellten Einheit)",
|
||
/* Automatic start mode */"Automatischer Start des Lötmodus beim Einschalten der Spannungsversorgung. <T=An, F=Aus>",
|
||
/* Cooldown blink */"Blinkende Temperaturanzeige beim Abkühlen, solange heiß. <T=An, F=Aus>"
|
||
/* Temperature calibration enter menu */"Kalibrierung der Lötspitzentemperatur",
|
||
/* Settings reset command */"Alle Einstellungen zurücksetzen",
|
||
/* Calibrate input voltage */"Kalibrierung der Eingangsspannung. Kurzer Tastendruck zum Einstellen, langer Tastendruck zum Verlassen.",
|
||
/* Advanced soldering screen enabled */"Detaillierte Anzeige im Lötmodus <T=An, F=Aus>",
|
||
};
|
||
|
||
const char* SettingsCalibrationWarning = "Vor dem Fortfahren muss die Lötspitze vollständig abgekühlt sein!";
|
||
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
|
||
const char* SleepingSimpleString = "Zzz ";// Must be <= 4 chars
|
||
const char* SleepingAdvancedString = "Ruhemodus...";// <=17 chars
|
||
const char* WarningSimpleString = "HEIß";//Must be <= 4 chars
|
||
const char* WarningAdvancedString = "Achtung! Spitze Heiß!";
|
||
|
||
const char SettingTrueChar = 'T';
|
||
const char SettingFalseChar = 'F';
|
||
const char SettingRightChar = 'R';
|
||
const char SettingLeftChar = 'L';
|
||
const char SettingAutoChar = 'A';
|
||
|
||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||
const char* SettingsShortNames[16][2] = {
|
||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||
/* (<= 4) Sleep temperature */{"STMP"},
|
||
/* (<= 4) Sleep timeout */{"STME"},
|
||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||
/* (<= 6) Boost enabled */{"BOOST"},
|
||
/* (<= 4) Boost temperature */{"BTMP"},
|
||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||
/* (<= 8) Settings reset command */{"RESET?"},
|
||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||
};
|
||
#endif
|
||
|
||
#ifdef LANG_SK
|
||
const char* SettingsLongNames[16] = {
|
||
// These are all the help text for all the settings.
|
||
// No requirements on spacing or length.
|
||
/* Power source (DC or batt) */"Zdroj napatia. Nastavit napatie pre vypnutie (cutoff) <DC=10V, nS=n*3.3V pre LiIon clanky>",
|
||
/* Sleep temperature */"Kludova teplota (v nastavenych jednotkach)",
|
||
/* Sleep timeout */"Kludovy rezim po <sekundach/minutach>",
|
||
/* Shutdown timeout */"Cas na vypnutie <minuty>",
|
||
/* Motion sensitivity level */"Citlivost detekcie pohybu <0=Vyp, 1=Min ... 9=Max>",
|
||
/* Temperature in F and C */"Jednotky merania teploty <C=stupne Celzia, F=stupne Fahrenheita>",
|
||
/* Advanced idle display mode enabled */"Zobrazit detailne informacie v kludovom rezime <T=Zap, F=Vyp>",
|
||
/* Display rotation mode */"Orientacia displeja <A=Auto, L=Lavak, R=Pravak>",
|
||
/* Boost enabled */"Povolit tlacidlo pre prudky nahrev <T=Zap, F=Vyp>",
|
||
/* Boost temperature */"Cielova teplota pre prudky nahrev (v nastavenych jednotkach)",
|
||
/* Automatic start mode */"Pri starte spustit rezim spajkovania <T=Zap, F=Vyp, S=Spanok>",
|
||
/* Cooldown blink */"Blikanie ukazovatela teploty pocas chladnutia hrotu <T=Zap, F=Vyp>"
|
||
/* Temperature calibration enter menu */"Kalibracia posunu hrotu",
|
||
/* Settings reset command */"Tovarenske nastavenia",
|
||
/* Calibrate input voltage */"Kalibracia VIN. Kratke stlacenie meni nastavenie, dlhe stlacenie pre navrat",
|
||
/* Advanced soldering screen enabled */"Zobrazenie detailov pocas spajkovania <T=Zap, F=Vyp>",
|
||
};
|
||
|
||
const char* SettingsCalibrationWarning = "Najprv sa prosim uistite, ze hrot ma izbovu teplotu!";
|
||
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
|
||
const char* SleepingSimpleString = "Chrr";// Must be <= 4 chars
|
||
const char* SleepingAdvancedString = "Kludovy rezim...";// <=17 chars
|
||
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
|
||
const char* WarningAdvancedString = "Pozor! Hrot je horuci!";
|
||
|
||
const char SettingTrueChar = 'T';
|
||
const char SettingFalseChar = 'F';
|
||
const char SettingRightChar = 'R';
|
||
const char SettingLeftChar = 'L';
|
||
const char SettingAutoChar = 'A';
|
||
|
||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||
const char* SettingsShortNames[16][2] = {
|
||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||
/* (<= 4) Sleep temperature */{"STMP"},
|
||
/* (<= 4) Sleep timeout */{"STME"},
|
||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||
/* (<= 6) Boost enabled */{"BOOST"},
|
||
/* (<= 4) Boost temperature */{"BTMP"},
|
||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||
/* (<= 8) Settings reset command */{"RESET?"},
|
||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||
};
|
||
#endif
|
||
|
||
#ifdef LANG_TR
|
||
const char* SettingsLongNames[16] = {
|
||
// These are all the help text for all the settings.
|
||
// No requirements on spacing or length.
|
||
/* Power source (DC or batt) */"Güç Kaynağı. kesim geriliminı ayarlar. <DC 10V> <S 3.3V hücre başına>",
|
||
/* Sleep temperature */"Uyku Sıcaklığı <C>",
|
||
/* Sleep timeout */"Uyku Zaman Aşımı <Dakika/Saniye>",
|
||
/* Shutdown timeout */"Kapatma Zaman Aşımı <Dakika>",
|
||
/* Motion sensitivity level */"Hareket Hassasiyeti <0.Kapalı 1.En az duyarlı 9.En duyarlı>",
|
||
/* Temperature in F and C */"Sıcaklık Ünitesi <C=Celsius F=Fahrenheit>",
|
||
/* Advanced idle display mode enabled */"Boş ekranda ayrıntılı bilgileri daha küçük bir yazı tipi ile göster.",
|
||
/* Display rotation mode */"Görüntü Yönlendirme <A. Otomatik L. Solak R. Sağlak>",
|
||
/* Boost enabled */"Lehimleme yaparken ön tuşa basmak Boost moduna sokar(450C)",
|
||
/* Boost temperature */"\"boost\" Modu Derecesi",
|
||
/* Automatic start mode */"Güç verildiğinde otomatik olarak lehimleme modunda başlat. T=Lehimleme Modu, S= Uyku Modu,F=Kapalı",
|
||
/* Cooldown blink */"Soğutma ekranında uç hala sıcakken derece yanıp sönsün.",
|
||
/* Temperature calibration enter menu */"Ucu kalibre et.",
|
||
/* Settings reset command */"Bütün ayarları sıfırla",
|
||
/* Calibrate input voltage */"VIN Kalibrasyonu. Düğmeler ayarlar, çıkmak için uzun bas.",
|
||
/* Advanced soldering screen enabled */"Lehimleme yaparken detaylı bilgi göster",
|
||
};
|
||
|
||
const char* SettingsCalibrationWarning = "Lütfen devam etmeden önce ucun oda sıcaklığında olduğunu garantiye alın!";
|
||
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
|
||
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
|
||
const char* SleepingAdvancedString = "Uyuyor...";// <=17 chars
|
||
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
|
||
const char* WarningAdvancedString = "UYARI! UÇ SICAK!";
|
||
|
||
const char SettingTrueChar = 'T';
|
||
const char SettingFalseChar = 'F';
|
||
const char SettingRightChar = 'R';
|
||
const char SettingLeftChar = 'L';
|
||
const char SettingAutoChar = 'A';
|
||
|
||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||
const char* SettingsShortNames[16][2] = {
|
||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||
/* (<= 4) Sleep temperature */{"STMP"},
|
||
/* (<= 4) Sleep timeout */{"STME"},
|
||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||
/* (<= 6) Boost enabled */{"BOOST"},
|
||
/* (<= 4) Boost temperature */{"BTMP"},
|
||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||
/* (<= 8) Settings reset command */{"RESET?"},
|
||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||
};
|
||
#endif
|
||
|
||
#ifdef LANG_HR
|
||
const char* SettingsLongNames[16] = {
|
||
// These are all the help text for all the settings.
|
||
// No requirements on spacing or length.
|
||
/* Power source (DC or batt) */"Izvor napajanja. Postavlja napon isključivanja. <DC 10V> <S 3.3V po ćeliji>",
|
||
/* Sleep temperature */"Temperatura spavanja. <C>",
|
||
/* Sleep timeout */"Vrijeme spavanja. <Minute/Sekunde>",
|
||
/* Shutdown timeout */"Vrijeme gašenja. <Minutes>",
|
||
/* Motion sensitivity level */"Osjetljivost prepoznavanja pokreta. <0=Ugašeno, 1=Najmanje osjetljivo, 9=Najosjetljivije>",
|
||
/* Temperature in F and C */"Jedinica temperature. <C=Celzij, F=Fahrenheit>",
|
||
/* Advanced idle display mode enabled */"Prikazivanje detaljnih informacija manjim fontom tijekom čekanja.",
|
||
/* Display rotation mode */"Orijentacija ekrana. <A=Automatski, L=Ljevoruki, D=Desnoruki>",
|
||
/* Boost enabled */"Držanjem prednjeg gumba prilikom lemljenja aktivira se pojačani (Boost) način.",
|
||
/* Boost temperature */"Temperatura u pojačanom (Boost) načinu.",
|
||
/* Automatic start mode */"Početno stanje lemilice po uključivanju napajanja. <+=Lemljenje, S=Spavanje, -=Ugašeno>",
|
||
/* Cooldown blink */"Bljeskanje temperature prilikom hlađenja, ako je lemilica vruća.",
|
||
/* Temperature calibration enter menu */"Kalibriranje temperature mjeri razliku temperature vška i temperature drške, dok je lemilica hladna.",
|
||
/* Settings reset command */"Vraćanje svih postavki.",
|
||
/* Calibrate input voltage */"Kalibracija ulaznog napona. Podešavanje gumbima, dugački pritisak za kraj.",
|
||
/* Advanced soldering screen enabled */"Prikazivanje detaljnih informacija tijekom lemljenja.",
|
||
};
|
||
|
||
const char* SettingsCalibrationWarning = "Provjerite da je vršak ohlađen na sobnu temperaturu prije nego što nastavite!";
|
||
const char* UVLOWarningString = "NAPON!!!"; //Fixed width 8 chars
|
||
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
|
||
const char* SleepingAdvancedString = "Spavanje...";// <=17 chars
|
||
const char* WarningSimpleString = "VRUĆ";//Must be <= 4 chars
|
||
const char* WarningAdvancedString = "OPREZ! Vršak je vruć!";
|
||
|
||
const char SettingTrueChar = '+';
|
||
const char SettingFalseChar = '-';
|
||
const char SettingRightChar = 'D';
|
||
const char SettingLeftChar = 'L';
|
||
const char SettingAutoChar = 'A';
|
||
|
||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||
const char* SettingsShortNames[16][2] = {
|
||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||
/* (<= 4) Sleep temperature */{"STMP"},
|
||
/* (<= 4) Sleep timeout */{"STME"},
|
||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||
/* (<= 6) Boost enabled */{"BOOST"},
|
||
/* (<= 4) Boost temperature */{"BTMP"},
|
||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||
/* (<= 8) Settings reset command */{"RESET?"},
|
||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||
};
|
||
#endif
|
||
|
||
#ifdef LANG_CS_CZ
|
||
const char* SettingsLongNames[16] = {
|
||
/*These are all the help text for all the settings.*/
|
||
/*No requirements on spacing or length*/
|
||
"Zdroj napajeni. Pri nizsim napeti se odpoji <DC=10V, xS=x*3.3V pro LiPo,LiIon...>", //Power Source
|
||
"Teplota v rezimu spanku",//Sleep Temp
|
||
"Cas do rezimu spanku <Minut/Sekund>",//Sleep Timeout
|
||
"Cas do automatickeho vypnuti <Minut>",//Shutdown Time
|
||
"Citlivost detekce pohybu <0=Vyp, 1=Min, ... 9=Max>",//Motion Sensitivity
|
||
"Jednotky mereni teploty <C=Celsius, F=Fahrenheit>",//Temp Unit
|
||
"Zobrazit podrobnosti na vychozi obrazovce <Z=Zap, V=Vyp>",//Detailed Information
|
||
"Otoceni displaye <A=Auto, L=Levak, P=Pravak>",//Orientation
|
||
"Povolit boost drzenim leveho tlacitka pri pajeni <Z=Zap, V=Vyp>",//Boost enable
|
||
"Teplota pri boostu",//Boost Temp
|
||
"Pri startu ihned nahrivat hrot <Z=Zap, V=Vyp, S=Rezim spanku>",//Auto start
|
||
"Blikani teploty pri chladnuti, dokud je hrot horky <Z=Zap, V=Vyp>",//Cooling Blink
|
||
"Kalibrovat mereni teploty",//Calibrate Tip
|
||
"Obnovit tovarni nastaveni",//Reset Settings
|
||
"Kalibrovat vstupni napeti. Tlacitky upravte, podrzenim potvrdte.",//VIN Cal
|
||
"Zobrazit podrobnosti pri pajeni <Z=Zap, V=Vyp>",//ADV SLD
|
||
};
|
||
|
||
const char* SettingsCalibrationWarning = "Ujistete se, ze hrot ma pokojovou teplotu! "; //ending space needed
|
||
const char* UVLOWarningString = "LOW VOLT";//Fixed width 8 chars
|
||
const char* SleepingSimpleString = "Zzz ";// Must be <= 4 chars
|
||
const char* SleepingAdvancedString = "Rezim spanku...";// <=17 chars
|
||
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
|
||
const char* WarningAdvancedString = "!! HORKY HROT !!";// <= 16 chars
|
||
|
||
const char SettingTrueChar = 'Z';
|
||
const char SettingFalseChar = 'V';
|
||
const char SettingRightChar = 'P';
|
||
const char SettingLeftChar = 'L';
|
||
const char SettingAutoChar = 'A';
|
||
|
||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_DOUBLE_LINE;
|
||
const char* SettingsShortNames[16][2] = {
|
||
/* (<= 11) Power source (DC or batt) */ {"Zdroj", "napeti"},
|
||
/* (<= 9) Sleep temperature */ {"Teplota v", "r. spanku"},
|
||
/* (<= 9) Sleep timeout */ {"Cas do", "r. spanku"},
|
||
/* (<= 11) Shutdown timeout */ {"Cas do", "vypnuti"},
|
||
/* (<= 13) Motion sensitivity level */ {"Citlivost", "det. pohybu"},
|
||
/* (<= 13) Temperature in F and C */ {"Jednotky", "teploty"},
|
||
/* (<= 13) Advanced idle display mode enabled */ {"Podrobnosti", "na vych. obr."},
|
||
/* (<= 13) Display rotation mode */ {"Otoceni", "obrazovky"},
|
||
/* (<= 13) Boost enabled */ {"Povolit", "boost"},
|
||
/* (<= 9) Boost temperature */ {"Teplota v", "r. boost"},
|
||
/* (<= 13) Automatic start mode */ {"Auto", "start"},
|
||
/* (<= 13) Cooldown blink */ {"Blikani pri", "chladnuti"},
|
||
/* (<= 16) Temperature calibration enter menu */ {"Kalibrovat", "teplotu?"},
|
||
/* (<= 16) Settings reset command */ {"Tovarni", "nastaveni?"},
|
||
/* (<= 16) Calibrate input voltage */ {"Kalibrovat", "vstupni napeti?"},
|
||
/* (<= 13) Advanced soldering screen enabled */ {"Podrobnosti", "pri pajeni"},
|
||
};
|
||
#endif
|
||
|
||
#ifdef LANG_HUN
|
||
const char* SettingsLongNames[16] = {
|
||
/*These are all the help text for all the settings.*/
|
||
/*No requirements on spacing or length*/
|
||
"Áramforrás. Beállítja a lekapcsolási feszültséget. <DC 10V> <S 3.3V cellánként>", //Power Source
|
||
"Alvási hőmérséklet <C>",//Sleep Temp
|
||
"Elalvási időzítő <Perc/Másodperc>",//Sleep Timeout
|
||
"Kikapcsolási időzítő <Minutes>",//Shutdown Time
|
||
"Mozgás érzékenység beállítása. <0.Ki 1.kevésbé érzékeny 9.legérzékenyebb>",//Motion Sensitivity
|
||
"Hőmérsékleti egység <C=Celsius F=Fahrenheit>",//Temp Unit
|
||
"Részletes információ megjelenítése kisebb betűméretben a készenléti képernyőn.",//Detailed Information
|
||
"Megjelenítési tájolás <A. Automatikus L. Balkezes R. Jobbkezes>",//Orientation
|
||
"Elülső gombbal lépjen boost módba, 450C forrasztás közben",//Boost enable
|
||
"Hőmérséklet \"boost\" módban",//Boost Temp
|
||
"Bekapcsolás után automatikusan lépjen forrasztás módba. T=Forrasztás, S=Alvó mód,F=Ki",//Auto start
|
||
"Villogjon a hőmérséklet hűlés közben, amíg a hegy forró.",//Cooling Blink
|
||
"Hegy hőmérsékletének kalibrálása",//Calibrate Tip
|
||
"Beállítások alaphelyzetbe állítása",//Reset Settings
|
||
"A bemeneti feszültség kalibrálása. Röviden megnyomva állítsa be, hosszan nyomja meg a kilépéshez.",//VIN Cal
|
||
"Részletes információk megjelenítése forrasztás közben",//ADV SLD
|
||
};
|
||
|
||
const char* SettingsCalibrationWarning = "Folytatás előtt győződj meg róla, hogy a hegy szobahőmérsékletű!";
|
||
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
|
||
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
|
||
const char* SleepingAdvancedString = "Alvás...";// <=17 chars
|
||
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
|
||
const char* WarningAdvancedString = "FIGYELEM! FORRÓ HEGY!";
|
||
|
||
const char SettingTrueChar = 'T';
|
||
const char SettingFalseChar = 'F';
|
||
const char SettingRightChar = 'R';
|
||
const char SettingLeftChar = 'L';
|
||
const char SettingAutoChar = 'A';
|
||
|
||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||
const char* SettingsShortNames[16][2] = {
|
||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||
/* (<= 4) Sleep temperature */{"STMP"},
|
||
/* (<= 4) Sleep timeout */{"STME"},
|
||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||
/* (<= 6) Boost enabled */{"BOOST"},
|
||
/* (<= 4) Boost temperature */{"BTMP"},
|
||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||
/* (<= 8) Settings reset command */{"RESET?"},
|
||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||
};
|
||
#endif
|
||
|
||
#ifdef LANG_TR
|
||
const char* SettingsLongNames[16] = {
|
||
/*These are all the help text for all the settings.*/
|
||
/*No requirements on spacing or length*/
|
||
/* Power source (DC or batt) */"Güç Kaynağı. kesim geriliminı ayarlar. <DC 10V> <S 3.3V hücre başına>", //Power Source
|
||
/* Sleep temperature */"Uyku Sıcaklığı <C>",//Sleep Temp
|
||
/* Sleep timeout */"Uyku Zaman Aşımı <Dakika/Saniye>",//Sleep Timeout
|
||
/* Shutdown timeout */"Kapatma Zaman Aşımı <Dakika>",//Shutdown Time
|
||
/* Motion sensitivity level */"Hareket Hassasiyeti <0.Kapalı 1.En az duyarlı 9.En duyarlı>",//Motion Sensitivity
|
||
/* Temperature in F and C */"Sıcaklık Ünitesi <C=Celsius F=Fahrenheit>",//Temp Unit
|
||
/* Advanced idle display mode enabled */"Boş ekranda ayrıntılı bilgileri daha küçük bir yazı tipi ile göster.",//Detailed Information
|
||
/* Display rotation mode */"Görüntü Yönlendirme <A. Otomatik L. Solak R. Sağlak>",//Orientation
|
||
/* Boost enabled */"Lehimleme yaparken ön tuşa basmak Boost moduna sokar(450C)",//Boost enable
|
||
/* Boost temperature */"\"boost\" Modu Derecesi",//Boost Temp
|
||
/* Automatic start mode */"Güç verildiğinde otomatik olarak lehimleme modunda başlat. T=Lehimleme Modu, S= Uyku Modu,F=Kapalı",//Auto start
|
||
/* Cooldown blink */"Soğutma ekranında uç hala sıcakken derece yanıp sönsün.",//Cooling Blink
|
||
/* Temperature calibration enter menu */"Ucu kalibre et.",//Calibrate Tip
|
||
/* Settings reset command */"Bütün ayarları sıfırla",//Reset Settings
|
||
/* Calibrate input voltage */"VIN Kalibrasyonu. Düğmeler ayarlar, çıkmak için uzun bas.",//VIN Cal
|
||
/* Advanced soldering screen enabled */"Lehimleme yaparken detaylı bilgi göster",//ADV SLD
|
||
};
|
||
|
||
const char* SettingsCalibrationWarning = "Lütfen devam etmeden önce ucun oda sıcaklığında olduğunu garantiye alın!";
|
||
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
|
||
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
|
||
const char* SleepingAdvancedString = "Uyuyor...";// <=17 chars
|
||
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
|
||
const char* WarningAdvancedString = "UYARI! UÇ SICAK!";
|
||
|
||
const char SettingTrueChar = 'T';
|
||
const char SettingFalseChar = 'F';
|
||
const char SettingRightChar = 'R';
|
||
const char SettingLeftChar = 'L';
|
||
const char SettingAutoChar = 'A';
|
||
|
||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||
const char* SettingsShortNames[16][2] = {
|
||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||
/* (<= 4) Sleep temperature */{"STMP"},
|
||
/* (<= 4) Sleep timeout */{"STME"},
|
||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||
/* (<= 6) Boost enabled */{"BOOST"},
|
||
/* (<= 4) Boost temperature */{"BTMP"},
|
||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||
/* (<= 8) Settings reset command */{"RESET?"},
|
||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||
};
|
||
#endif
|
||
|
||
#ifdef LANG_DK
|
||
const char* SettingsLongNames[16] =
|
||
{
|
||
/*These are all the help text for all the settings.*/
|
||
/*No requirements on spacing or length*/
|
||
"Strømforsyning. Indstil Cutoff Spændingen. <DC 10V <S 3.3V per cell", //Power Source
|
||
"Dvale Temperatur <C",//Sleep Temp
|
||
"Dvale Timeout <Minutter/Sekunder",//Sleep Timeout
|
||
"sluknings Timeout <Minutter",//Shutdown Time
|
||
"Bevægelsesfølsomhed <0.Slukket 1.Mindst følsom 9.Mest følsom",//Motion Sensitivity
|
||
"Temperatur Enhed <C=Celsius F=Fahrenheit",//Temp Unit
|
||
"Vis detialieret information med en mindre skriftstørrelse på standby skærmen.",//Detailed Information
|
||
"Skærm Orientering <A. Automatisk V. Venstre Håndet H. Højre Håndet",//Orientation
|
||
"Ved tryk på front knap Aktiveres boost-funktionen, 450C tilstand når der loddes",//Boost enable
|
||
"Temperatur i \"boost\" mode",//Boost Temp
|
||
"Start automatisk med lodning når strøm sættes til. L=Lodning, D= Dvale tilstand,S=Slukket",//Auto start
|
||
"Blink temperaturen på skærmen, mens spidsen stadig er varm.",//Cooling Blink
|
||
"kalibrere spids temperatur.",//Calibrate Tip
|
||
"Gendan alle indstillinger",//Reset Settings
|
||
"VIN kalibrering. Knapperne justere, Lang tryk for at gå ud",//VIN Cal
|
||
"Vis detialieret information mens der loddes",//ADV SLD
|
||
};
|
||
|
||
const char* SettingsCalibrationWarning =
|
||
"Sørg for at loddespidsen er ved stuetemperatur, inden du fortsætter!";
|
||
const char* UVLOWarningString = "Lav Volt"; //Fixed width 8 chars
|
||
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
|
||
const char* SleepingAdvancedString = "Dvale...";// <=17 chars
|
||
const char* WarningSimpleString = "Varm";//Must be <= 4 chars
|
||
const char* WarningAdvancedString = "ADVARSEL! VARM LODDESPIDS!";
|
||
|
||
const char SettingTrueChar = 'j';
|
||
const char SettingFalseChar = 'N';
|
||
const char SettingRightChar = 'H';
|
||
const char SettingLeftChar = 'V';
|
||
const char SettingAutoChar = 'A';
|
||
|
||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||
const char* SettingsShortNames[16][2] = {
|
||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||
/* (<= 4) Sleep temperature */{"STMP"},
|
||
/* (<= 4) Sleep timeout */{"STME"},
|
||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||
/* (<= 6) Boost enabled */{"BOOST"},
|
||
/* (<= 4) Boost temperature */{"BTMP"},
|
||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||
/* (<= 8) Settings reset command */{"RESET?"},
|
||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||
};
|
||
#endif
|
||
#ifdef LANG_PL
|
||
const char* SettingsLongNames[16] =
|
||
{
|
||
/*These are all the help text for all the settings.*/
|
||
/*No requirements on spacing or length*/
|
||
"Źródło zasilania. Ustaw napięcie odcięcia. <DC 10V> <S 3.3V dla ogniw Li>", //Power Source
|
||
"Temperatura uśpienia <°C>",//Sleep Temp
|
||
"Czas uśpienia <Minuty/Sekundy>",//Sleep Timeout
|
||
"Czas wyłączenia <Minuty>",//Shutdown Time
|
||
"Czułość ruchu <0.Wyłączona 1.minimalna 9.maksymalna>",//Motion Sensitivity
|
||
"Jednostka temperatury <C=Celsius F=Fahrenheit>",//Temp Unit
|
||
"Wyświetla szczegółowe informacje za pomocą mniejszej czcionki na ekranie bezczynnośći <T = wł., N = wył.>",//Detailed Information
|
||
"Orientacja wyświetlacza <A. Automatyczna L. Leworęczna P. Praworęczna>",//Orientation
|
||
"Użyj przycisku przedniego w celu zwiększenia temperatury <T = wł., N = wył.>",//Boost enable
|
||
"Temperatura w trybie \"boost\" ",//Boost Temp
|
||
"Automatyczne uruchamianie trybu lutowania po włączeniu zasilania. T=Lutowanie, S= Tryb Uspienia ,N=Wyłącz",//Auto start
|
||
"Temperatura na ekranie miga, gdy grot jest jeszcze gorący. <T = wł., N = wył.>",//Cooling Blink
|
||
"Kalibracja temperatury grota lutownicy",//Calibrate Tip
|
||
"Zresetuj wszystkie ustawienia",//Reset Settings
|
||
"Kalibracja napięcia wejściowego. Krótkie naciśnięcie, aby ustawić, długie naciśnięcie, aby wyjść.",//VIN Cal
|
||
"Wyświetl szczegółowe informacje podczas lutowania <T = wł., N = wył.>",//ADV SLD
|
||
};
|
||
|
||
const char* SettingsCalibrationWarning =
|
||
"Przed kontynuowaniem upewnij się, że końcówka osiągnela temperature pokojowa!";
|
||
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
|
||
const char* SleepingSimpleString = "Zzz!";// Must be <= 4 chars
|
||
const char* SleepingAdvancedString = "Uspienie...";// <=17 chars
|
||
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
|
||
const char* WarningAdvancedString = "UWAGA! GORĄCA KOŃCÓWKA!";
|
||
|
||
const char SettingTrueChar = 'T';
|
||
const char SettingFalseChar = 'N';
|
||
const char SettingRightChar = 'P';
|
||
const char SettingLeftChar = 'L';
|
||
const char SettingAutoChar = 'A';
|
||
|
||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||
const char* SettingsShortNames[16][2] = {
|
||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||
/* (<= 4) Sleep temperature */{"STMP"},
|
||
/* (<= 4) Sleep timeout */{"STME"},
|
||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||
/* (<= 6) Boost enabled */{"BOOST"},
|
||
/* (<= 4) Boost temperature */{"BTMP"},
|
||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||
/* (<= 8) Settings reset command */{"RESET?"},
|
||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},};
|
||
#endif
|