mirror of
https://github.com/Ralim/IronOS.git
synced 2025-02-26 07:53:55 +00:00
5eb3df47df
The LIS2DH12 driver performed an unnecessary endianness conversion, as data from the sensor was already coming in little-endian format. The MMA8652FC driver is now using the rev16 opcode to perform the swap rather than doing all the bitshuffling operations in multiple steps.
51 lines
1.4 KiB
C++
51 lines
1.4 KiB
C++
/*
|
|
* LIS2DH12.cpp
|
|
*
|
|
* Created on: 27Feb.,2018
|
|
* Author: Ralim
|
|
*/
|
|
|
|
#include <array>
|
|
|
|
#include "LIS2DH12.hpp"
|
|
#include "cmsis_os.h"
|
|
|
|
typedef struct {
|
|
const uint8_t reg;
|
|
const uint8_t value;
|
|
} LIS_REG;
|
|
|
|
static const LIS_REG i2c_registers[] = {
|
|
{LIS_CTRL_REG1, 0x17}, // 25Hz
|
|
{LIS_CTRL_REG2, 0b00001000}, // Highpass filter off
|
|
{LIS_CTRL_REG3, 0b01100000}, // Setup interrupt pins
|
|
{LIS_CTRL_REG4, 0b00001000}, // Block update mode off, HR on
|
|
{LIS_CTRL_REG5, 0b00000010},
|
|
{LIS_CTRL_REG6, 0b01100010},
|
|
//Basically setup the unit to run, and enable 4D orientation detection
|
|
{LIS_INT2_CFG, 0b01111110}, //setup for movement detection
|
|
{LIS_INT2_THS, 0x28},
|
|
{LIS_INT2_DURATION, 64},
|
|
{LIS_INT1_CFG, 0b01111110},
|
|
{LIS_INT1_THS, 0x28},
|
|
{LIS_INT1_DURATION, 64}
|
|
};
|
|
|
|
void LIS2DH12::initalize() {
|
|
for (size_t index = 0; index < (sizeof(i2c_registers) / sizeof(i2c_registers[0])); index++) {
|
|
FRToSI2C::I2C_RegisterWrite(LIS2DH_I2C_ADDRESS,i2c_registers[index].reg, i2c_registers[index].value);
|
|
}
|
|
}
|
|
|
|
void LIS2DH12::getAxisReadings(int16_t& x, int16_t& y, int16_t& z) {
|
|
std::array<int16_t, 3> sensorData;
|
|
|
|
FRToSI2C::Mem_Read(LIS2DH_I2C_ADDRESS, 0xA8, I2C_MEMADD_SIZE_8BIT,
|
|
reinterpret_cast<uint8_t*>(sensorData.begin()),
|
|
sensorData.size() * sizeof(int16_t));
|
|
|
|
x = sensorData[0];
|
|
y = sensorData[1];
|
|
z = sensorData[2];
|
|
}
|