IronOS/Translations/translation_DA.json

{
  "languageCode": "DA",
  "languageLocalName": "Dansk",
  "fonts": ["ascii_basic", "latin_extended"],
  "messages": {
    "SettingsCalibrationDone": "Calibration done!",
    "SettingsCalibrationWarning": "Sørg for at loddespidsen er ved stuetemperatur, inden du fortsætter!",
    "SettingsResetWarning": "Are you sure to reset settings to default values?",
    "UVLOWarningString": "Lav Volt",
    "UndervoltageString": "Undervoltage",
    "InputVoltageString": "Input V: ",
    "WarningTipTempString": "Tip Temp: ",
    "BadTipString": "BAD TIP",
    "SleepingSimpleString": "Zzzz",
    "SleepingAdvancedString": "Dvale...",
    "WarningSimpleString": "Varm",
    "WarningAdvancedString": "VARM LODDESPIDS!",
    "SleepingTipAdvancedString": "Tip:",
    "IdleTipString": "Tip:",
    "IdleSetString": " Set:",
    "TipDisconnectedString": "TIP DISCONNECTED",
    "SolderingAdvancedPowerPrompt": "Power: ",
    "OffString": "Off",
    "YourGainMessage": "Your gain:"
  },
  "messagesWarn": {
    "ResetOKMessage": "Reset OK",
    "SettingsResetMessage": ["Settings were", "reset!"],
    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
    "LockingKeysString": " LOCKED",
    "UnlockingKeysString": "UNLOCKED",
    "WarningKeysLockedString": "!LOCKED!",
    "WarningThermalRunaway": ["Thermal", "Runaway"]
  },
  "characters": {
    "SettingRightChar": "H",
    "SettingLeftChar": "V",
    "SettingAutoChar": "A",
    "SettingOffChar": "O",
    "SettingSlowChar": "S",
    "SettingMediumChar": "M",
    "SettingFastChar": "F",
    "SettingStartNoneChar": "S",
    "SettingStartSolderingChar": "L",
    "SettingStartSleepChar": "D",
    "SettingStartSleepOffChar": "R",
    "SettingSensitivityOff": "O",
    "SettingSensitivityLow": "L",
    "SettingSensitivityMedium": "M",
    "SettingSensitivityHigh": "H",
    "SettingLockDisableChar": "D",
    "SettingLockBoostChar": "B",
    "SettingLockFullChar": "F",
    "SettingNAChar": "N/A"
  },
  "menuGroups": {
    "PowerMenu": {
      "text2": ["Power", "settings"],
      "desc": "Power settings"
    },
    "SolderingMenu": {
      "text2": ["Soldering", "Settings"],
      "desc": "Soldering settings"
    },
    "PowerSavingMenu": {
      "text2": ["Sleep", "Modes"],
      "desc": "Power Saving Settings"
    },
    "UIMenu": {
      "text2": ["User", "Interface"],
      "desc": "User Interface settings"
    },
    "AdvancedMenu": {
      "text2": ["Advanced", "Options"],
      "desc": "Advanced options"
    }
  },
  "menuOptions": {
    "DCInCutoff": {
      "text2": ["Power", "source"],
      "desc": "Strømforsyning. Indstil Cutoff Spændingen. (DC 10V) (S 3,3V per cell)"
    },
    "SleepTemperature": {
      "text2": ["Sleep", "temp"],
      "desc": "Dvale Temperatur (C)"
    },
    "SleepTimeout": {
      "text2": ["Sleep", "timeout"],
      "desc": "Dvale Timeout (Minutter | Sekunder)"
    },
    "ShutdownTimeout": {
      "text2": ["Shutdown", "timeout"],
      "desc": "sluknings Timeout (Minutter)"
    },
    "MotionSensitivity": {
      "text2": ["Motion", "sensitivity"],
      "desc": "Bevægelsesfølsomhed (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)"
    },
    "TemperatureUnit": {
      "text2": ["Temperature", "unit"],
      "desc": "Temperatur Enhed (C=Celsius | F=Fahrenheit)"
    },
    "AdvancedIdle": {
      "text2": ["Detailed", "idle screen"],
      "desc": "Vis detialieret information med en mindre skriftstørrelse på standby skærmen."
    },
    "DisplayRotation": {
      "text2": ["Display", "orientation"],
      "desc": "Skærm Orientering (H=Højre Håndet | V=Venstre Håndet | A=Automatisk)"
    },
    "BoostTemperature": {
      "text2": ["Boost", "temp"],
      "desc": "Temperatur i \"boost\" mode"
    },
    "AutoStart": {
      "text2": ["Auto", "start"],
      "desc": "Start automatisk med lodning når strøm sættes til. (S=Slukket | L=Lodning | D=Dvale tilstand | R=Dvale tilstand rumtemperatur)"
    },
    "CooldownBlink": {
      "text2": ["Cooldown", "blink"],
      "desc": "Blink temperaturen på skærmen, mens spidsen stadig er varm."
    },
    "TemperatureCalibration": {
      "text2": ["Calibrate", "temperature?"],
      "desc": "kalibrere spids temperatur."
    },
    "SettingsReset": {
      "text2": ["Factory", "Reset?"],
      "desc": "Gendan alle indstillinger"
    },
    "VoltageCalibration": {
      "text2": ["Calibrate", "input voltage?"],
      "desc": "VIN kalibrering. Knapperne justere, Lang tryk for at gå ud"
    },
    "AdvancedSoldering": {
      "text2": ["Detailed", "solder screen"],
      "desc": "Vis detialieret information mens der loddes"
    },
    "ScrollingSpeed": {
      "text2": ["Scrolling", "speed"],
      "desc": "Speed this text scrolls past at"
    },
    "QCMaxVoltage": {
      "text2": ["Power", "Wattage"],
      "desc": "Power Wattage of the power adapter used"
    },
    "PDNegTimeout": {
      "text2": ["PD", "timeout"],
      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
    },
    "PowerLimit": {
      "text2": ["Power", "Limit"],
      "desc": "Maximum power the iron can use (Watts)"
    },
    "ReverseButtonTempChange": {
      "text2": ["Key +-", "reverse?"],
      "desc": "Reverse the tip temperature change buttons plus minus assignment."
    },
    "TempChangeShortStep": {
      "text2": ["Temp change", "short?"],
      "desc": "Temperature change steps on short button press!"
    },
    "TempChangeLongStep": {
      "text2": ["Temp change", "long?"],
      "desc": "Temperature change steps on long button press!"
    },
    "PowerPulsePower": {
      "text2": ["Power", "Pulse W"],
      "desc": "Keep awake pulse power intensity"
    },
    "HallEffSensitivity": {
      "text2": ["Hall Eff", "Sensitivity"],
      "desc": "Sensitivity of the Hall effect sensor in detecting sleep (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)"
    },
    "LockingMode": {
      "text2": ["Allow buttons", "locking"],
      "desc": "When soldering, long press on both buttons lock them (D=Disable | B=Boost only | F=Full locking)"
    },
    "MinVolCell": {
      "text2": ["Minimum", "voltage"],
      "desc": "Minimum allowed voltage per cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
    },
    "AnimLoop": {
      "text2": ["Anim.", "loop"],
      "desc": "Loop icon animations in root menu"
    },
    "AnimSpeed": {
      "text2": ["Anim.", "speed"],
      "desc": "Speed of icon animations in menu (O=off | L=low | M=medium | H=high)"
    },
    "PowerPulseWait": {
      "text2": ["Power pulse", "wait time"],
      "desc": "Time to wait before triggering every keep-awake pulse (x 2,5s)"
    },
    "PowerPulseDuration": {
      "text2": ["Power pulse", "duration"],
      "desc": "Keep-awake-pulse duration (x 250ms)"
    },
    "LanguageSwitch": {
      "text2": ["Sprog :", " DA       Dansk"],
      "desc": ""
    },
    "Brightness": {
      "text2": ["Screen", "Brightness"],
      "desc": "Adjust the contrast/brightness of the OLED screen"
    },
    "ColourInversion": {
      "text2": ["Screen", "Invert"],
      "desc": "Invert the colours of the OLED screen"
    }
  }
}