IronOS/Translations/translation_ZH_CN.json

{
	"languageCode": "ZH_CN",
	"languageLocalName": "简体中文",
	"fonts": [
		"ascii_basic",
		"cjk"
	],
	"tempUnitFahrenheit": true,
	"messages": {
		"SettingsCalibrationWarning": "Please make sure tip & handle are at room temperature at next boot!",
		"SettingsResetWarning": "你是否确定要将全部设定重置为默认值？",
		"UVLOWarningString": "电压过低",
		"UndervoltageString": "Undervoltage",
		"InputVoltageString": "VIN: ",
		"SleepingSimpleString": "Zzzz",
		"SleepingAdvancedString": "Zzzz...",
		"SleepingTipAdvancedString": "--->",
		"OffString": "关",
		"DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"
	},
	"messagesWarn": {
		"ResetOKMessage": "已重置！",
		"SettingsResetMessage": "设定已被重置！",
		"NoAccelerometerMessage": "未检测到加速度计",
		"NoPowerDeliveryMessage": "未检测到PD电路",
		"LockingKeysString": "已锁定",
		"UnlockingKeysString": "已解锁",
		"WarningKeysLockedString": "!按键锁定!",
		"WarningThermalRunaway": "加热失控"
	},
	"characters": {
		"SettingRightChar": "右",
		"SettingLeftChar": "左",
		"SettingAutoChar": "自",
		"SettingOffChar": "关",
		"SettingSlowChar": "慢",
		"SettingMediumChar": "中",
		"SettingFastChar": "快",
		"SettingStartNoneChar": "无",
		"SettingStartSolderingChar": "焊",
		"SettingStartSleepChar": "待",
		"SettingStartSleepOffChar": "室",
		"SettingSensitivityOff": "关",
		"SettingSensitivityLow": "低",
		"SettingSensitivityMedium": "中",
		"SettingSensitivityHigh": "高",
		"SettingLockDisableChar": "无",
		"SettingLockBoostChar": "增",
		"SettingLockFullChar": "全"
	},
	"menuGroups": {
		"PowerMenu": {
			"text2": "电源设置",
			"desc": ""
		},
		"SolderingMenu": {
			"text2": "焊接设置",
			"desc": ""
		},
		"PowerSavingMenu": {
			"text2": "待机设置",
			"desc": ""
		},
		"UIMenu": {
			"text2": "用户界面",
			"desc": ""
		},
		"AdvancedMenu": {
			"text2": "高级设置",
			"desc": ""
		}
	},
	"menuOptions": {
		"DCInCutoff": {
			"text2": "下限电压",
			"desc": "设置自动停机电压 <DC=10V | S=（串）每节锂电池3.3V；此设置会禁用功率限制>"
		},
		"MinVolCell": {
			"text2": "最低电压",
			"desc": "每节电池的最低允许电压 <V（伏特）> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
		},
		"QCMaxVoltage": {
			"text2": "QC电压",
			"desc": "使用QC电源时请求的最高目标电压"
		},
		"PDNegTimeout": {
			"text2": "PD超时",
			"desc": "设定USB-PD协议交涉的超时时限；为兼容某些QC电源而设 <x100ms（亳秒）>"
		},
		"BoostTemperature": {
			"text2": "增热温度",
			"desc": "增热模式时使用的温度"
		},
		"AutoStart": {
			"text2": "自动启动",
			"desc": "开机时自动启动 <无=禁用 | 焊=焊接模式 | 待=待机模式 | 室=室温待机>"
		},
		"TempChangeShortStep": {
			"text2": "短按温度调整",
			"desc": "调校温度时短按按键的温度变幅"
		},
		"TempChangeLongStep": {
			"text2": "长按温度调整",
			"desc": "调校温度时长按按键的温度变幅"
		},
		"LockingMode": {
			"text2": "按键锁定",
			"desc": "焊接模式时，同时长按两个按键启用按键锁定 <无=禁用 | 增=只容许增热模式 | 全=完全锁定>"
		},
		"MotionSensitivity": {
			"text2": "动作灵敏度",
			"desc": "0=禁用 | 1=最低灵敏度 | ... | 9=最高灵敏度"
		},
		"SleepTemperature": {
			"text2": "待机温度",
			"desc": "待机模式时的烙铁头温度"
		},
		"SleepTimeout": {
			"text2": "待机超时",
			"desc": "自动进入待机模式前的等候时间 <s=秒 | m=分钟>"
		},
		"ShutdownTimeout": {
			"text2": "自动关机",
			"desc": "自动关机前的等候时间 <m=分钟>"
		},
		"HallEffSensitivity": {
			"text2": "磁场灵敏度",
			"desc": "霍尔效应传感器用作启动待机模式的灵敏度 <0=禁用 | 1=最低灵敏度 | ... | 9=最高灵敏度>"
		},
		"TemperatureUnit": {
			"text2": "温度单位",
			"desc": "C=摄氏 | F=华氏"
		},
		"DisplayRotation": {
			"text2": "显示方向",
			"desc": "右=右手 | 左=左手 | 自=自动"
		},
		"CooldownBlink": {
			"text2": "降温时闪显",
			"desc": "停止加热之后，闪动温度显示提醒烙铁头仍处于高温状态"
		},
		"ScrollingSpeed": {
			"text2": "滚动速度",
			"desc": "解说文字的滚动速度"
		},
		"ReverseButtonTempChange": {
			"text2": "调换加减键",
			"desc": "调校温度时更换加减键的方向"
		},
		"AnimSpeed": {
			"text2": "动画速度",
			"desc": "主菜单中功能图标动画的播放速度 <关=不显示动画 | 慢=慢速 | 中=中速 | 快=快速>"
		},
		"AnimLoop": {
			"text2": "动画循环",
			"desc": "主菜单中循环播放功能图标动画"
		},
		"Brightness": {
			"text2": "屏幕亮度",
			"desc": "调整OLED屏幕的亮度"
		},
		"ColourInversion": {
			"text2": "反转屏幕颜色",
			"desc": "反转OLED黑/白屏幕"
		},
		"LOGOTime": {
			"text2": "Boot logo duration",
			"desc": "Set boot logo duration (s=seconds)"
		},
		"AdvancedIdle": {
			"text2": "闲置画面详情",
			"desc": "闲置画面以英语小字体显示详情"
		},
		"AdvancedSoldering": {
			"text2": "焊接画面详情",
			"desc": "焊接模式画面以英语小字体显示详请"
		},
		"PowerLimit": {
			"text2": "功率限制",
			"desc": "限制烙铁可用的最大功率 <W=瓦特>"
		},
		"CalibrateCJC": {
			"text2": "Calibrate CJC",
			"desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
		},
		"VoltageCalibration": {
			"text2": "输入电压校正？",
			"desc": "开始校正输入电压（VIN）<长按以退出>"
		},
		"PowerPulsePower": {
			"text2": "电源脉冲",
			"desc": "为保持电源处于唤醒状态所用的功率 <Watt（瓦特）>"
		},
		"PowerPulseWait": {
			"text2": "电源脉冲间隔",
			"desc": "为保持电源处于唤醒状态，每次通电之间的间隔时间 <x2.5s（秒）>"
		},
		"PowerPulseDuration": {
			"text2": "电源脉冲时长",
			"desc": "为保持电源处于唤醒状态，每次通电脉冲的时间长度 <x250ms（亳秒）>"
		},
		"SettingsReset": {
			"text2": "全部重置？",
			"desc": "将所有设定重置为默认值"
		},
		"LanguageSwitch": {
			"text2": "语言：简体中文",
			"desc": ""
		}
	}
}