mirror of
https://github.com/Ralim/IronOS.git
synced 2025-02-26 07:53:55 +00:00
58 lines
2.3 KiB
C
58 lines
2.3 KiB
C
/*
|
|
* Settings.h
|
|
*
|
|
* Created on: 29 Sep 2016
|
|
* Author: Ralim
|
|
*
|
|
* Houses the system settings and allows saving / restoring from flash
|
|
*/
|
|
|
|
#ifndef SETTINGS_H_
|
|
#define SETTINGS_H_
|
|
#include <stdint.h>
|
|
#include "stm32f10x_flash.h"
|
|
#include "Oled.h"
|
|
#define SETTINGSVERSION 17 /*Change this if you change the struct below to prevent people getting out of sync*/
|
|
//Display Speeds
|
|
#define DISPLAYMODE_FAST (0x00)
|
|
#define DISPLAYMODE_MEDIUM (0x01)
|
|
#define DISPLAYMODE_SLOW (0x02)
|
|
//Rounding Modes
|
|
#define ROUNDING_NONE (0x00)
|
|
#define ROUNDING_FIVE (0x01)
|
|
#define ROUNDING_TEN (0x02)
|
|
|
|
/*
|
|
* This struct must be a multiple of 2 bytes as it is saved / restored from flash in uint16_t chunks
|
|
*/
|
|
typedef struct {
|
|
uint16_t SolderingTemp; //current set point for the iron
|
|
uint32_t SleepTemp; //temp to drop to in sleep
|
|
uint8_t version; //Used to track if a reset is needed on firmware upgrade
|
|
uint8_t SleepTime; //minutes timeout to sleep
|
|
uint8_t cutoutSetting:3; //(3 bits) The voltage we cut out at for under voltage
|
|
uint8_t powerDisplay:1; //Toggle to swap the arrows with a power readout instead
|
|
uint8_t displayTempInF:1; //If we need to convert the C reading to F
|
|
uint8_t OrientationMode:2; //If true we want to invert the display for lefties
|
|
uint8_t sensitivity:5; //Sensitivity of accelerometer (5 bits)
|
|
uint8_t autoStart:2; //Should the unit automatically jump straight into soldering mode when power is applied
|
|
uint8_t ShutdownTime:6; //Time until unit shuts down if left alone
|
|
uint8_t displayUpdateSpeed:2; //How fast the display updates / temp showing mode
|
|
uint8_t temperatureRounding:2; //Rounding mode for the temperature
|
|
uint8_t boostModeEnabled:1; //Boost mode swaps BUT_A in soldering mode to temporary soldering temp over-ride
|
|
uint8_t coolingTempBlink:1; //Should the temperature blink on the cool down screen until its <50C
|
|
uint16_t tempCalibration; //Temperature calibration value
|
|
uint16_t voltageDiv; //Voltage divisor factor
|
|
uint16_t BoostTemp; //Boost mode set point for the iron
|
|
uint32_t padding;//This is here for in case we are not an even divisor so that nothing gets cut off
|
|
} systemSettingsType;
|
|
|
|
extern systemSettingsType systemSettings;
|
|
|
|
void saveSettings();
|
|
void restoreSettings();
|
|
uint8_t lookupVoltageLevel(uint8_t level);
|
|
void resetSettings();
|
|
void showBootLogoIfavailable();
|
|
#endif /* SETTINGS_H_ */
|