IronOS/workspace/TS100/Core/Src/Setup.c

/*
 * Setup.c
 *
 *  Created on: 29Aug.,2017
 *      Author: Ben V. Brown
 */
#include "Setup.h"
ADC_HandleTypeDef hadc1;
ADC_HandleTypeDef hadc2;
DMA_HandleTypeDef hdma_adc1;

I2C_HandleTypeDef hi2c1;
DMA_HandleTypeDef hdma_i2c1_rx;
DMA_HandleTypeDef hdma_i2c1_tx;

IWDG_HandleTypeDef hiwdg;
TIM_HandleTypeDef htim2;
TIM_HandleTypeDef htim3;

uint16_t ADCReadings[64];  // room for 32 lots of the pair of readings

// Functions
static void SystemClock_Config(void);
static void MX_ADC1_Init(void);
static void MX_I2C1_Init(void);
static void MX_IWDG_Init(void);
static void MX_TIM3_Init(void);
static void MX_TIM2_Init(void);
static void MX_DMA_Init(void);
static void MX_GPIO_Init(void);
static void MX_ADC2_Init(void);

void Setup_HAL() {
	SystemClock_Config();
#ifndef LOCAL_BUILD
	__HAL_AFIO_REMAP_SWJ_DISABLE()
	;
#else
	__HAL_AFIO_REMAP_SWJ_NOJTAG();
#endif

	MX_GPIO_Init();
	MX_DMA_Init();
	MX_I2C1_Init();
	MX_ADC1_Init();
	MX_ADC2_Init();
	MX_TIM3_Init();
	MX_TIM2_Init();
	MX_IWDG_Init();
	HAL_ADC_Start(&hadc2);
	HAL_ADCEx_MultiModeStart_DMA(&hadc1, (uint32_t*) ADCReadings, 64); // start DMA of normal readings
	HAL_ADCEx_InjectedStart(&hadc1);   // enable injected  readings
	HAL_ADCEx_InjectedStart(&hadc2);   // enable injected  readings
}

// channel 0 -> temperature sensor, 1-> VIN
uint16_t getADC(uint8_t channel) {
	uint32_t sum = 0;
	for (uint8_t i = 0; i < 32; i++)
		sum += ADCReadings[channel + (i * 2)];
	return sum >> 2;
}

/** System Clock Configuration
 */
void SystemClock_Config(void) {
	RCC_OscInitTypeDef RCC_OscInitStruct;
	RCC_ClkInitTypeDef RCC_ClkInitStruct;
	RCC_PeriphCLKInitTypeDef PeriphClkInit;

	/**Initializes the CPU, AHB and APB busses clocks
	 */
	RCC_OscInitStruct.OscillatorType =
	RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSI;
	RCC_OscInitStruct.HSIState = RCC_HSI_ON;
	RCC_OscInitStruct.HSICalibrationValue = 16;
	RCC_OscInitStruct.LSIState = RCC_LSI_ON;
	RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
	RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI_DIV2;
	RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL16;  // 64MHz
	HAL_RCC_OscConfig(&RCC_OscInitStruct);

	/**Initializes the CPU, AHB and APB busses clocks
	 */
	RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK |
	RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
	RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
	RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
	RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV16;  // TIM
														// 2,3,4,5,6,7,12,13,14
	RCC_ClkInitStruct.APB2CLKDivider =
	RCC_HCLK_DIV1;  // 64 mhz to some peripherals and adc

	HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2);

	PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC;
	PeriphClkInit.AdcClockSelection =
	RCC_ADCPCLK2_DIV6;  // 6 or 8 are the only non overclocked options
	HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit);

	/**Configure the Systick interrupt time
	 */
	HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq() / 1000);

	/**Configure the Systick
	 */
	HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK);

	/* SysTick_IRQn interrupt configuration */
	HAL_NVIC_SetPriority(SysTick_IRQn, 15, 0);
}

/* ADC1 init function */
static void MX_ADC1_Init(void) {
	ADC_MultiModeTypeDef multimode;

	ADC_ChannelConfTypeDef sConfig;
	ADC_InjectionConfTypeDef sConfigInjected;
	/**Common config
	 */
	hadc1.Instance = ADC1;
	hadc1.Init.ScanConvMode = ADC_SCAN_ENABLE;
	hadc1.Init.ContinuousConvMode = ENABLE;
	hadc1.Init.DiscontinuousConvMode = DISABLE;
	hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
	hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
	hadc1.Init.NbrOfConversion = 2;
	HAL_ADC_Init(&hadc1);

	/**Configure the ADC multi-mode
	 */
	multimode.Mode = ADC_DUALMODE_REGSIMULT_INJECSIMULT;
	HAL_ADCEx_MultiModeConfigChannel(&hadc1, &multimode);

	/**Configure Regular Channel
	 */
	sConfig.Channel = TMP36_ADC1_CHANNEL;
	sConfig.Rank = 1;
	sConfig.SamplingTime = ADC_SAMPLETIME_71CYCLES_5;
	HAL_ADC_ConfigChannel(&hadc1, &sConfig);

	/**Configure Regular Channel
	 */
	sConfig.Channel = VIN_ADC1_CHANNEL;
	sConfig.Rank = 2;
	HAL_ADC_ConfigChannel(&hadc1, &sConfig);

	/**Configure Injected Channel
	 */
	// F in = 10.66 MHz
	/*
	 * Injected time is 1 delay clock + (12 adc cycles*4)+4*sampletime =~217
	 * clocks = 0.2ms Charge time is 0.016 uS ideally So Sampling time must be >=
	 * 0.016uS 1/10.66MHz is 0.09uS, so 1 CLK is *should* be enough
	 * */
	sConfigInjected.InjectedChannel = TIP_TEMP_ADC1_CHANNEL;
	sConfigInjected.InjectedRank = 1;
	sConfigInjected.InjectedNbrOfConversion = 4;
	sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_7CYCLES_5;
	sConfigInjected.ExternalTrigInjecConv = ADC_EXTERNALTRIGINJECCONV_T2_CC1;
	sConfigInjected.AutoInjectedConv = DISABLE;
	sConfigInjected.InjectedDiscontinuousConvMode = DISABLE;
	sConfigInjected.InjectedOffset = 0;

	HAL_ADCEx_InjectedConfigChannel(&hadc1, &sConfigInjected);

	sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_1CYCLE_5;
	sConfigInjected.InjectedRank = 2;
	HAL_ADCEx_InjectedConfigChannel(&hadc1, &sConfigInjected);
	sConfigInjected.InjectedRank = 3;
	HAL_ADCEx_InjectedConfigChannel(&hadc1, &sConfigInjected);
	sConfigInjected.InjectedRank = 4;
	HAL_ADCEx_InjectedConfigChannel(&hadc1, &sConfigInjected);
	SET_BIT(hadc1.Instance->CR1, (ADC_CR1_JEOCIE)); // Enable end of injected conv irq
	// Run ADC internal calibration
	while (HAL_ADCEx_Calibration_Start(&hadc1) != HAL_OK)
		;
}

/* ADC2 init function */
static void MX_ADC2_Init(void) {
	ADC_ChannelConfTypeDef sConfig;
	ADC_InjectionConfTypeDef sConfigInjected;

	/**Common config
	 */
	hadc2.Instance = ADC2;
	hadc2.Init.ScanConvMode = ADC_SCAN_ENABLE;
	hadc2.Init.ContinuousConvMode = ENABLE;
	hadc2.Init.DiscontinuousConvMode = DISABLE;
	hadc2.Init.ExternalTrigConv = ADC_SOFTWARE_START;
	hadc2.Init.DataAlign = ADC_DATAALIGN_RIGHT;
	hadc2.Init.NbrOfConversion = 2;
	HAL_ADC_Init(&hadc2);

	/**Configure Regular Channel
	 */
	sConfig.Channel = TIP_TEMP_ADC2_CHANNEL;
	sConfig.Rank = ADC_REGULAR_RANK_1;
	sConfig.SamplingTime = ADC_SAMPLETIME_71CYCLES_5;
	HAL_ADC_ConfigChannel(&hadc2, &sConfig);
	sConfig.Channel = VIN_ADC2_CHANNEL;
	sConfig.Rank = ADC_REGULAR_RANK_2;
	HAL_ADC_ConfigChannel(&hadc2, &sConfig);

	/**Configure Injected Channel
	 */
	sConfigInjected.InjectedChannel = TIP_TEMP_ADC2_CHANNEL;
	sConfigInjected.InjectedRank = ADC_INJECTED_RANK_1;
	sConfigInjected.InjectedNbrOfConversion = 4;
	sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_7CYCLES_5;
	sConfigInjected.ExternalTrigInjecConv = ADC_EXTERNALTRIGINJECCONV_T2_CC1;
	sConfigInjected.AutoInjectedConv = DISABLE;
	sConfigInjected.InjectedDiscontinuousConvMode = DISABLE;
	sConfigInjected.InjectedOffset = 0;
	HAL_ADCEx_InjectedConfigChannel(&hadc2, &sConfigInjected);
	sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_1CYCLE_5;

	sConfigInjected.InjectedRank = ADC_INJECTED_RANK_2;
	HAL_ADCEx_InjectedConfigChannel(&hadc2, &sConfigInjected);
	sConfigInjected.InjectedRank = ADC_INJECTED_RANK_3;
	HAL_ADCEx_InjectedConfigChannel(&hadc2, &sConfigInjected);
	sConfigInjected.InjectedRank = ADC_INJECTED_RANK_4;
	HAL_ADCEx_InjectedConfigChannel(&hadc2, &sConfigInjected);

	// Run ADC internal calibration
	while (HAL_ADCEx_Calibration_Start(&hadc2) != HAL_OK)
		;
}
/* I2C1 init function */
static void MX_I2C1_Init(void) {
	hi2c1.Instance = I2C1;
	hi2c1.Init.ClockSpeed = 75000;
	// OLED doesnt handle >100k when its asleep (off).
	hi2c1.Init.DutyCycle = I2C_DUTYCYCLE_2;
	hi2c1.Init.OwnAddress1 = 0;
	hi2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
	hi2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
	hi2c1.Init.OwnAddress2 = 0;
	hi2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
	hi2c1.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
	HAL_I2C_Init(&hi2c1);
}

/* IWDG init function */
static void MX_IWDG_Init(void) {
	hiwdg.Instance = IWDG;
	hiwdg.Init.Prescaler = IWDG_PRESCALER_256;
	hiwdg.Init.Reload = 100;
#ifndef LOCAL_BUILD
	HAL_IWDG_Init(&hiwdg);
#endif
}

/* TIM3 init function */
static void MX_TIM3_Init(void) {
	TIM_ClockConfigTypeDef sClockSourceConfig;
	TIM_MasterConfigTypeDef sMasterConfig;
	TIM_OC_InitTypeDef sConfigOC;

	htim3.Instance = TIM3;
	htim3.Init.Prescaler = 8;
	htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
	htim3.Init.Period = 100;                            // 5 Khz PWM freq
	htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV4;  // 4mhz before div
	htim3.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE; //Preload the ARR register (though we dont use this)
	HAL_TIM_Base_Init(&htim3);

	sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
	HAL_TIM_ConfigClockSource(&htim3, &sClockSourceConfig);

	HAL_TIM_PWM_Init(&htim3);

	HAL_TIM_OC_Init(&htim3);

	sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
	sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
	HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig);

	sConfigOC.OCMode = TIM_OCMODE_PWM1;
	sConfigOC.Pulse = 80;  //80% duty cycle, that is AC coupled through the cap
	sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
	sConfigOC.OCFastMode = TIM_OCFAST_ENABLE;
	HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, PWM_Out_CHANNEL);

	GPIO_InitTypeDef GPIO_InitStruct;

	/**TIM3 GPIO Configuration
	 PWM_Out_Pin     ------> TIM3_CH1
	 */
	GPIO_InitStruct.Pin = PWM_Out_Pin;
	GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
	GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; //We would like sharp rising edges
	HAL_GPIO_Init(PWM_Out_GPIO_Port, &GPIO_InitStruct);
#ifdef MODEL_TS100
	// Remap TIM3_CH1 to be on PB4
	__HAL_AFIO_REMAP_TIM3_PARTIAL()
	;
#else
	// No re-map required
#endif
	HAL_TIM_PWM_Start(&htim3, PWM_Out_CHANNEL);
}
/* TIM3 init function */
static void MX_TIM2_Init(void) {
	/*
	 * We use the channel 1 to trigger the ADC at end of PWM period
	 * And we use the channel 4 as the PWM modulation source using Interrupts
	 * */
	TIM_ClockConfigTypeDef sClockSourceConfig;
	TIM_MasterConfigTypeDef sMasterConfig;
	TIM_OC_InitTypeDef sConfigOC;

	// Timer 2 is fairly slow as its being used to run the PWM and trigger the ADC
	// in the PWM off time.
	htim2.Instance = TIM2;
	htim2.Init.Prescaler = 4000; //1mhz tick rate/800 = 1.25 KHz tick rate

	// pwm out is 10k from tim3, we want to run our PWM at around 10hz or slower on the output stage
	// These values give a rate of around 8Hz
	htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
	htim2.Init.Period = 255 + 17;
	htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV4;  // 4mhz before divide
	htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
	htim2.Init.RepetitionCounter = 0;
	HAL_TIM_Base_Init(&htim2);

	sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
	HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig);

	HAL_TIM_PWM_Init(&htim2);
	HAL_TIM_OC_Init(&htim2);

	sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
	sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
	HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig);

	sConfigOC.OCMode = TIM_OCMODE_PWM1;
	sConfigOC.Pulse = 255 + 13;//13 -> Delay of 5ms
	//255 is the largest time period of the drive signal, and then offset ADC sample to be a bit delayed after this
	/*
	 * It takes 4 milliseconds for output to be stable after PWM turns off.
	 * Assume ADC samples in 0.5ms
	 * We need to set this to 100% + 4.5ms
	 * */
	sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
	sConfigOC.OCFastMode = TIM_OCFAST_ENABLE;
	HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_1);
	sConfigOC.Pulse = 0;  //default to entirely off
	HAL_TIM_OC_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_4);

	HAL_TIM_Base_Start_IT(&htim2);
	HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_1);
	HAL_TIM_PWM_Start_IT(&htim2, TIM_CHANNEL_4);
	HAL_NVIC_SetPriority(TIM2_IRQn, 15, 0);
	HAL_NVIC_EnableIRQ(TIM2_IRQn);
}

/**
 * Enable DMA controller clock
 */
static void MX_DMA_Init(void) {
	/* DMA controller clock enable */
	__HAL_RCC_DMA1_CLK_ENABLE()
	;

	/* DMA interrupt init */
	/* DMA1_Channel1_IRQn interrupt configuration */
	HAL_NVIC_SetPriority(DMA1_Channel1_IRQn, 5, 0);
	HAL_NVIC_EnableIRQ(DMA1_Channel1_IRQn);
	/* DMA1_Channel6_IRQn interrupt configuration */
	HAL_NVIC_SetPriority(DMA1_Channel6_IRQn, 5, 0);
	HAL_NVIC_EnableIRQ(DMA1_Channel6_IRQn);
	/* DMA1_Channel7_IRQn interrupt configuration */
	HAL_NVIC_SetPriority(DMA1_Channel7_IRQn, 5, 0);
	HAL_NVIC_EnableIRQ(DMA1_Channel7_IRQn);
}

/** Configure pins as
 * Analog
 * Input
 * Output
 * EVENT_OUT
 * EXTI
 * Free pins are configured automatically as Analog
 PB0   ------> ADCx_IN8
 PB1   ------> ADCx_IN9
 */
static void MX_GPIO_Init(void) {
	GPIO_InitTypeDef GPIO_InitStruct;

	/* GPIO Ports Clock Enable */
	__HAL_RCC_GPIOD_CLK_ENABLE()
	;
	__HAL_RCC_GPIOA_CLK_ENABLE()
	;
	__HAL_RCC_GPIOB_CLK_ENABLE()
	;

	/*Configure GPIO pin Output Level */
	HAL_GPIO_WritePin(OLED_RESET_GPIO_Port, OLED_RESET_Pin, GPIO_PIN_RESET);
	GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
	/*Configure GPIO pins : PD0 PD1 */
	GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1;
	GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
	HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
	/*Configure peripheral I/O remapping */
	__HAL_AFIO_REMAP_PD01_ENABLE()
	;
	//^ remap XTAL so that pins can be analog (all input buffers off).
	// reduces power consumption

	/*
	 * Configure All pins as analog by default
	 */
	GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3 |
	GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7 |
	GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_15;
	GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
	HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
	GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 |
#ifdef MODEL_TS100
			GPIO_PIN_3 |
#endif
			GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7 |
			GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11 |
			GPIO_PIN_12 | GPIO_PIN_13 | GPIO_PIN_14 | GPIO_PIN_15;
	HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);

#ifdef MODEL_TS100
	/* Pull USB lines low to disable, pull down debug too*/
	GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_14 | GPIO_PIN_13;
	GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
	GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
	HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
	HAL_GPIO_WritePin(GPIOA, GPIO_PIN_11, GPIO_PIN_RESET);
	HAL_GPIO_WritePin(GPIOA, GPIO_PIN_12, GPIO_PIN_RESET);
	HAL_GPIO_WritePin(GPIOA, GPIO_PIN_13, GPIO_PIN_RESET);
	HAL_GPIO_WritePin(GPIOA, GPIO_PIN_14, GPIO_PIN_RESET);
#else
	/* TS80 */
	/* Leave USB lines open circuit*/

#endif

	/*Configure GPIO pins : KEY_B_Pin KEY_A_Pin */
	GPIO_InitStruct.Pin = KEY_B_Pin | KEY_A_Pin;
	GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
	GPIO_InitStruct.Pull = GPIO_PULLUP;
	HAL_GPIO_Init(KEY_B_GPIO_Port, &GPIO_InitStruct);

	/*Configure GPIO pin : OLED_RESET_Pin */
	GPIO_InitStruct.Pin = OLED_RESET_Pin;
	GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
	GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
	HAL_GPIO_Init(OLED_RESET_GPIO_Port, &GPIO_InitStruct);
	HAL_GPIO_WritePin(OLED_RESET_GPIO_Port, OLED_RESET_Pin, GPIO_PIN_RESET);

	// Pull down LCD reset
	HAL_GPIO_WritePin(OLED_RESET_GPIO_Port, OLED_RESET_Pin, GPIO_PIN_RESET);
	HAL_Delay(30);
	HAL_GPIO_WritePin(OLED_RESET_GPIO_Port, OLED_RESET_Pin, GPIO_PIN_SET);
}