V2.01 roundup

Closes #132 afaik.

Bootup Logo/python_logo_converter/img2ts100.py

@@ -1,24 +1,23 @@
 #!/usr/bin/env python
-
-VERSION_STRING = '0.01'
-
-
+# coding=utf-8
+from __future__ import division
 import os
 import sys
 
+
 try:
-    import PIL, PIL.Image, PIL.ImageOps
-except ImportError,error:
-    raise ImportError,   "%s: %s requres Python Imaging Library (PIL). " \
-                         "Install with `pip` or OS-specific package " \
-                         "management tool." \
-                       % (error, sys.argv[0])
-
+    from PIL import Image, ImageOps
+except ImportError as error:
+    raise ImportError("{}: {} requres Python Imaging Library (PIL). " 
+                      "Install with `pip` or OS-specific package "
+                      "management tool."
+                      .format(error, sys.argv[0]))
 
+VERSION_STRING = '0.01'
 
 LCD_WIDTH       = 96
 LCD_HEIGHT      = 16
-LCD_NUM_BYTES   = LCD_WIDTH * LCD_HEIGHT / 8
+LCD_NUM_BYTES   = LCD_WIDTH * LCD_HEIGHT // 8
 LCD_PADDED_SIZE = 1024
 
 INTELHEX_DATA_RECORD                    = 0x00
@@ -28,40 +27,36 @@ INTELHEX_BYTES_PER_LINE                 = 16
 INTELHEX_MINIMUM_SIZE                   = 4096
 
 
-
 def split16(word):
-    '''return high and low byte of 16-bit word value as tuple'''
-    return ((word >> 8) & 0xff, word & 0xff)
-
+    """return high and low byte of 16-bit word value as tuple"""
+    return (word >> 8) & 0xff, word & 0xff
 
 
 def intel_hex_line(file, record_type, offset, data):
-    '''write a line of data in Intel hex format'''
+    """write a line of data in Intel hex format"""
     # length, address offset, record type
     record_length = len(data)
-    file.write(':%02X%04X%02X' % (record_length, offset, record_type))
+    file.write(':{:02X}{:04X}{:02X}'.format(record_length, offset, record_type))
 
     # data
-    map(lambda byte: file.write("%02X" % byte), data)
+    map(lambda byte: file.write("{:02X}".format(byte)), data)
 
     # compute and write checksum (with DOS line ending for compatibility/safety)
-    file.write(   "%02X\r\n"
-                % (  (  (  sum(data,                    # sum data ...
-                                 record_length          # ... and other ...
-                               + sum(split16(offset))   # ... fields ...
-                               + record_type)           # ... on line
-                         & 0xff)                        # low 8 bits
-                      ^ 0xff)                           # two's ...
-                   + 1))                                # ... complement
+    file.write("{:02X}\r\n"
+               .format(((sum(data,                   # sum data ...
+                             record_length           # ... and other ...
+                             + sum(split16(offset))  # ... fields ...
+                             + record_type)          # ... on line
+                         & 0xff)                     # low 8 bits
+                        ^ 0xff)                      # two's ...
+                       + 1))                         # ... complement
 
 
-
-def intel_hex(file, bytes, start_address = 0x0):
-    '''write block of data in Intel hex format'''
-    if len(bytes) % INTELHEX_BYTES_PER_LINE != 0:
-        raise ValueError, \
-                "Program error: Size of LCD data is not evenly divisible by %s" \
-              % INTELHEX_BYTES_PER_LINE
+def intel_hex(file, bytes_, start_address=0x0):
+    """write block of data in Intel hex format"""
+    if len(bytes_) % INTELHEX_BYTES_PER_LINE != 0:
+        raise ValueError("Program error: Size of LCD data is not evenly divisible by {}"
+                         .format(INTELHEX_BYTES_PER_LINE))
 
     address_lo =  start_address        & 0xffff
     address_hi = (start_address >> 16) & 0xffff
@@ -74,11 +69,11 @@ def intel_hex(file, bytes, start_address = 0x0):
     size_written = 0
     while size_written < INTELHEX_MINIMUM_SIZE:
         offset = address_lo
-        for line_start in range(0, len(bytes), INTELHEX_BYTES_PER_LINE):
+        for line_start in range(0, len(bytes_), INTELHEX_BYTES_PER_LINE):
             intel_hex_line(file,
                            INTELHEX_DATA_RECORD,
                            offset,
-                           bytes[line_start:line_start+INTELHEX_BYTES_PER_LINE])
+                           bytes_[line_start:line_start + INTELHEX_BYTES_PER_LINE])
             size_written += INTELHEX_BYTES_PER_LINE
             if size_written >= INTELHEX_MINIMUM_SIZE:
                 break
@@ -87,14 +82,13 @@ def intel_hex(file, bytes, start_address = 0x0):
     intel_hex_line(file, INTELHEX_END_OF_FILE_RECORD, 0, ())
 
 
-
 def img2hex(input_filename,
             output_file,
             preview_filename=None,
             threshold=128,
             dither=False,
             negative=False):
-    '''
+    """
     Convert 'input_filename' image file into Intel hex format with data
         formatted for display on TS100 LCD and file object.
     Input image is converted from color or grayscale to black-and-white,
@@ -107,13 +101,12 @@ def img2hex(input_filename,
         dithering algorithm used.
     Optional `negative' inverts black/white regardless of input image type
         or other options.
-    '''
+    """
 
     try:
-        image = PIL.Image.open(input_filename)
-    except BaseException,error:
-        raise IOError, \
-              "error reading image file \"%s\": %s" % (input_filename, error)
+        image = Image.open(input_filename)
+    except BaseException as e:
+        raise IOError("error reading image file \"{}\": {}".format(input_filename, e))
 
     # convert to luminance
     # do even if already black/white because PIL can't invert 1-bit so
@@ -124,10 +117,10 @@ def img2hex(input_filename,
         image = image.convert('L')
 
     if image.size != (LCD_WIDTH, LCD_HEIGHT):
-        image = image.resize((LCD_WIDTH, LCD_HEIGHT), PIL.Image.BICUBIC)
+        image = image.resize((LCD_WIDTH, LCD_HEIGHT), Image.BICUBIC)
 
     if negative:
-        image = PIL.ImageOps.invert(image)
+        image = ImageOps.invert(image)
         threshold = 255 - threshold  # have to invert threshold
 
     if dither:
@@ -135,7 +128,8 @@ def img2hex(input_filename,
     else:
         image = image.point(lambda pixel: 0 if pixel < threshold else 1, '1')
 
-    if preview_filename: image.save(preview_filename)
+    if preview_filename:
+        image.save(preview_filename)
 
     ''' DEBUG
     for row in range(LCD_HEIGHT):
@@ -155,7 +149,7 @@ def img2hex(input_filename,
     data[3] = 0xF0
 
     # convert to TS100 LCD format
-    for ndx in range(LCD_WIDTH * 16 / 8):
+    for ndx in range(LCD_WIDTH * 16 // 8):
         bottom_half_offset = 0 if ndx < LCD_WIDTH else 8
         byte = 0
         for y in range(8):
@@ -167,7 +161,6 @@ def img2hex(input_filename,
     intel_hex(output_file, data, 0x0800B800)
 
 
-
 def parse_commandline():
     parser = argparse.ArgumentParser(
                 formatter_class=argparse.ArgumentDefaultsHelpFormatter,
@@ -175,10 +168,8 @@ def parse_commandline():
                             "at startup")
 
     def zero_to_255(text):
-        try:
-            value = int(text)
-            assert(value >= 0 and value <= 255)
-        except:
+        value = int(text)
+        if not 0 <= value <= 255:
             raise argparse.ArgumentTypeError("must be integer from 0 to 255 ")
         return value
 
@@ -215,37 +206,36 @@ def parse_commandline():
 
     parser.add_argument('-v', '--version',
                         action='version',
-                        version="%(prog)s version " +  VERSION_STRING,
+                        version="%(prog)s version " + VERSION_STRING,
                         help="print version info")
 
     return parser.parse_args()
 
 
-
 if __name__ == "__main__":
     import argparse
     args = parse_commandline()
 
     if os.path.exists(args.output_filename) and not args.force:
-        sys.stderr.write(  "Won't overwrite existing file \"%s\" (use --force "
-                           "option to override)\n"
-                         % args.output_filename)
+        sys.stderr.write("Won't overwrite existing file \"{}\" (use --force "
+                         "option to override)\n"
+                         .format(args.output_filename))
         sys.exit(1)
 
     if args.preview and os.path.exists(args.preview) and not args.force:
-        sys.stderr.write(  "Won't overwrite existing file \"%s\" (use --force "
-                           "option to override)\n"
-                         % args.preview)
+        sys.stderr.write("Won't overwrite existing file \"{}\" (use --force "
+                         "option to override)\n"
+                         .format(args.preview))
         sys.exit(1)
 
     try:
-        with open(args.output_filename, 'w') as output_file:
+        with open(args.output_filename, 'w') as output:
             img2hex(args.input_filename,
-                    output_file,
+                    output,
                     args.preview,
                     args.threshold,
                     args.dither,
                     args.negative)
-    except BaseException,error:
-        sys.stderr.write("Error converting file: %s\n" % error)
+    except BaseException as error:
+        sys.stderr.write("Error converting file: {}\n".format(error))
         sys.exit(1)

README.md

@@ -1,12 +1,3 @@
-# Version 2 development branch
-
-This firmware is not complete, it is missing some features such as :
-
-* Russian font has issues atm
-* Soldering detailed view coming
-While it most likely will work, It is not meant for production use *just* yet!
-
-
 # TS100
 This is a complete rewrite of the open source software for the ts100 soldering iron.
 The version two fork of this code has no shared code with the original firmware from Miniware (E-design) group.
@@ -78,7 +69,7 @@ Holding the button at the front of the iron will enter boost mode (if enabled).
 ## Settings Menu
 
 This menu allows you to cycle through all the options and set their values.
-The button near the tip cycles through the options, and the one near the usb changes the selected option.
+The button near the USB cycles through the options, and the one near the tip changes the selected option.
 Note that settings are not saved until you exit the menu, and some settings such as screen flip do not apply until a power cycle is applied.
 If you leave the unit alone (ie don't press any buttons) on a setting, after 3 seconds the screen will scroll a longer version of the name
 

workspace/TS100/inc/OLED.hpp

@@ -24,34 +24,36 @@ extern "C" {
 
 class OLED {
 public:
-	OLED(I2C_HandleTypeDef* i2cHandle);		// Initialize Driver and store I2C pointer
-	void initialize(); 						// Startup the I2C coms (brings screen out of reset etc)
-	void refresh(); 						// Draw the buffer out to the LCD using the DMA Channel
-	void drawChar(char c, char preCursorCommand = '\0');					// Draw a character to a specific location
+	OLED(I2C_HandleTypeDef* i2cHandle);	// Initialize Driver and store I2C pointer
+	void initialize(); 	// Startup the I2C coms (brings screen out of reset etc)
+	void refresh(); 	// Draw the buffer out to the LCD using the DMA Channel
+	void drawChar(char c, char preCursorCommand = '\0');// Draw a character to a specific location
 	void displayOnOff(bool on);				// Turn the screen on or not
 	void setRotation(bool leftHanded);  	// Set the rotation for the screen
-	bool getRotation();						// Get the current rotation of the LCD
-	void print(const char* string);				// Draw a string to the current location, with current font
-	void setCursor(int16_t x, int16_t y);    // Set the cursor location
-	void setFont(uint8_t fontNumber);		// (Future) Set the font that is being used
+	bool getRotation();					// Get the current rotation of the LCD
+	void print(const char* string);	// Draw a string to the current location, with current font
+	void setCursor(int16_t x, int16_t y);   // Set the cursor location by pixels
+	void setCharCursor(int16_t x, int16_t y); //Set cursor location by chars in current font
+	void setFont(uint8_t fontNumber);// (Future) Set the font that is being used
 	void drawImage(const uint8_t* buffer, uint8_t x, uint8_t width);
 	// Draws an image to the buffer, at x offset from top to bottom (fixed height renders)
 	void printNumber(uint16_t number, uint8_t places);
 	// Draws a number at the current cursor location
 	void clearScreen();						// Clears the buffer
 	void drawBattery(uint8_t state);		// Draws the battery level symbol
-	void drawSymbol(uint8_t symbolID);		//Used for drawing symbols of a predictable width
-	void drawArea(int16_t x, int8_t y, uint8_t wide, uint8_t height, const uint8_t* ptr);
+	void drawSymbol(uint8_t symbolID);//Used for drawing symbols of a predictable width
+	void drawArea(int16_t x, int8_t y, uint8_t wide, uint8_t height,
+			const uint8_t* ptr);
 private:
 
 	//Draw a buffer to the screen buffer
 
 	I2C_HandleTypeDef* i2c;					//i2c Pointer
-	const uint8_t* currentFont;					// Pointer to the current font used for rendering to the buffer
+	const uint8_t* currentFont;	// Pointer to the current font used for rendering to the buffer
 	uint8_t screenBuffer[12 + 96 + 96 + 10];    // The data buffer
-	uint8_t* firstStripPtr;    // Pointers to the strips to allow for buffer having extra content
+	uint8_t* firstStripPtr; // Pointers to the strips to allow for buffer having extra content
 	uint8_t* secondStripPtr;	//Pointers to the strips
-	bool inLeftHandedMode;    // Whether the screen is in left or not (used for offsets in GRAM)
+	bool inLeftHandedMode; // Whether the screen is in left or not (used for offsets in GRAM)
 	bool displayOnOffState;					// If the display is on or not
 	uint8_t fontWidth, fontHeight;
 	int16_t cursor_x, cursor_y;

workspace/TS100/inc/Translation.h

@@ -8,8 +8,17 @@
 #ifndef TRANSLATION_H_
 #define TRANSLATION_H_
 
+enum ShortNameType {
+	SHORT_NAME_SINGLE_LINE = 1, SHORT_NAME_DOUBLE_LINE = 2,
+};
+
+/*
+ * When SettingsShortNameType is SHORT_NAME_SINGLE_LINE
+ * use SettingsShortNames as SettingsShortNames[16][1].. second column undefined
+ */
+extern const enum ShortNameType SettingsShortNameType;
+extern const char* SettingsShortNames[16][2];
 extern const char* SettingsLongNames[16];
-extern const char* SettingsShortNames[16];
 extern const char* SettingsCalibrationWarning;
 extern const char* UVLOWarningString;
 extern const char* SleepingSimpleString;
@@ -24,16 +33,16 @@ extern const char SettingLeftChar;
 extern const char SettingAutoChar;
 
 #define LANG_EN
-#define LANG
-
-#ifndef LANG
-#define LANG_EN
-#define LANG
-#endif
-
-#ifndef LANG
-#error NO LANGUAGE DEFINED
-#endif
-
+//#define LANG_RU
+//#define LANG_ES
+//#define LANG_SE
+//#define LANG_IT
+//#define LANG_FR
+//#define LANG_DE
+//#define LANG_CS_CZ
+//#define LANG_TR
+//#define LANG_HR
+//#define LANG_PL
+//#define LANG_DK
 
 #endif /* TRANSLATION_H_ */

workspace/TS100/src/OLED.cpp

@@ -63,7 +63,8 @@ void OLED::initialize() {
 	HAL_GPIO_WritePin(OLED_RESET_GPIO_Port, OLED_RESET_Pin, GPIO_PIN_SET);
 	HAL_Delay(5);
 	//Send the setup settings
-	HAL_I2C_Master_Transmit(i2c, DEVICEADDR_OLED, (uint8_t*) OLED_Setup_Array, configLength, 0xFFFF);
+	HAL_I2C_Master_Transmit(i2c, DEVICEADDR_OLED, (uint8_t*) OLED_Setup_Array,
+			configLength, 0xFFFF);
 	//displayOnOff(true);
 
 }
@@ -73,9 +74,9 @@ void OLED::refresh() {
 	screenBuffer[0] = 0x80;
 	screenBuffer[1] = 0x21;
 	screenBuffer[2] = 0x80;
-	screenBuffer[3] = inLeftHandedMode ? 0 : 32;    //display is shifted by 32 in left handed mode as driver ram is 128 wide
+	screenBuffer[3] = inLeftHandedMode ? 0 : 32; //display is shifted by 32 in left handed mode as driver ram is 128 wide
 	screenBuffer[4] = 0x80;
-	screenBuffer[5] = inLeftHandedMode ? 95 : 0x7F;    //End address of the ram segment we are writing to (96 wide)
+	screenBuffer[5] = inLeftHandedMode ? 95 : 0x7F; //End address of the ram segment we are writing to (96 wide)
 
 	screenBuffer[6] = 0x80;    //Set pages to rollover after 2
 	screenBuffer[7] = 0x22;
@@ -86,48 +87,67 @@ void OLED::refresh() {
 
 	screenBuffer[12] = 0x40;    //start of data marker
 	taskENTER_CRITICAL();
+	//Because I2C is shared, we cant task switch in the middle of the xfer
 
-	HAL_I2C_Master_Transmit(i2c, DEVICEADDR_OLED, screenBuffer, 12 + 96 * 2 + 1, 0xFFFF);
+	HAL_I2C_Master_Transmit(i2c, DEVICEADDR_OLED, screenBuffer, 12 + 96 * 2 + 1,
+			0xFFFF);
 	taskEXIT_CRITICAL();
 
 }
 
+/*
+ * Prints a char to the screen.
+ * UTF font handling is done using the two input chars.
+ * Precursor is the command char that is used to select the table.
+ */
 void OLED::drawChar(char c, char PrecursorCommand) {
-//prints a char to the screen
-	if (c < ' ')
+	if (c < ' ') {
 		return;
-	//We are left with
-	uint8_t* charPointer;
-	//Fonts are offset to start at the space char.
-	/*
-	 * UTF font handling is done using the two input chars
-	 * Precursor is the command char that is used to select the table
-	 *
-	 */
+	}
 	uint16_t index = 0;
-	if (PrecursorCommand == 0)
+	if (PrecursorCommand == 0) {
+		//Fonts are offset to start at the space char
 		index = (c - ' ');
-	else {
-
+	} else {
 		//This is for extended range
 		//We decode the precursor command to find the offset
-		//Latin stats at 96
+		//Latin starts at 96
 		c -= 0x80;
-		if (PrecursorCommand == 0xC3)
-			index = (128) + (c);
-		else if (PrecursorCommand == 0xC2)
-			index = (96) + (c);
-		else if (PrecursorCommand == 0xD0)
-			index = (192) + (c);
-		else if (PrecursorCommand == 0xD1)
-			index = (256) + (c);
-		else
-			return;
-	}
-	charPointer = ((uint8_t*) currentFont) + ((fontWidth * (fontHeight / 8)) * index);
 
-	if (cursor_x >= 0 && cursor_x < 96)
-		drawArea(cursor_x, cursor_y, fontWidth, fontHeight, charPointer);
+		switch (PrecursorCommand) {
+
+		case 0xC2:
+			index = (96 - 32) + (c);
+			break;  //-32 compensate for chars excluded from font C2 section
+		case 0xC3:
+			index = (128-32) + (c);
+			break;
+#if defined(LANG_RU) || defined(LANG_UK) || defined(LANG_SR) || defined(LANG_BG) || defined(LANG_MK)
+			case 0xD0:
+			index = (192) + (c);
+			break;
+			case 0xD1:
+			index = (256) + (c);
+			break;
+#else
+		case 0xC4:
+			index = (192) + (c);
+			break;
+		case 0xC5:
+			index = (256) + (c);
+			break;
+#endif
+
+		default:
+			return;
+		}
+	}
+	uint8_t* charPointer;
+	charPointer = ((uint8_t*) currentFont)
+			+ ((fontWidth * (fontHeight / 8)) * index);
+
+	drawArea(cursor_x, cursor_y, fontWidth, fontHeight, charPointer);
+
 	cursor_x += fontWidth;
 }
 
@@ -159,7 +179,8 @@ void OLED::setRotation(bool leftHanded) {
 		}
 		taskENTER_CRITICAL();
 
-		HAL_I2C_Master_Transmit(i2c, DEVICEADDR_OLED, (uint8_t*) OLED_Setup_Array, 50, 0xFFFF);
+		HAL_I2C_Master_Transmit(i2c, DEVICEADDR_OLED,
+				(uint8_t*) OLED_Setup_Array, 50, 0xFFFF);
 		taskEXIT_CRITICAL();
 		inLeftHandedMode = leftHanded;
 	}
@@ -181,7 +202,10 @@ void OLED::setCursor(int16_t x, int16_t y) {
 	cursor_x = x;
 	cursor_y = y;
 }
-
+void OLED::setCharCursor(int16_t x, int16_t y) {
+	cursor_x = x * fontWidth;
+	cursor_y = y * fontHeight;
+}
 void OLED::setFont(uint8_t fontNumber) {
 	if (fontNumber == 1) {
 		//small font
@@ -251,26 +275,31 @@ void OLED::drawBattery(uint8_t state) {
 void OLED::drawSymbol(uint8_t symbolID) {
 	//draw a symbol to the current cursor location
 	setFont(2);
-	drawChar(' ' + symbolID);    // space offset is in all fonts, so we pad it here and remove it later
+	drawChar(' ' + symbolID); // space offset is in all fonts, so we pad it here and remove it later
 	setFont(0);
 }
 
 //Draw an area, but y must be aligned on 0/8 offset
-void OLED::drawArea(int16_t x, int8_t y, uint8_t wide, uint8_t height, const uint8_t* ptr) {
+void OLED::drawArea(int16_t x, int8_t y, uint8_t wide, uint8_t height,
+		const uint8_t* ptr) {
 	// Splat this from x->x+wide in two strides
 	if (x < 0)
 		return;    //cutoffleft
-	if ((x + wide) > 96)
+	if ((x) > 96)
 		return;    //cutoff right
+	uint8_t width = wide;
+	if ((x + wide) > 96)
+		width = 96 - x; // trimming to draw partials
+
 	if (y == 0) {
 		//Splat first line of data
-		for (uint8_t xx = 0; xx < (wide); xx++) {
+		for (uint8_t xx = 0; xx < (width); xx++) {
 			firstStripPtr[xx + x] = ptr[xx];
 		}
 	}
 	if (y == 8 || height == 16) {
 		// Splat the second line
-		for (uint8_t xx = 0; xx < wide; xx++) {
+		for (uint8_t xx = 0; xx < width; xx++) {
 			secondStripPtr[x + xx] = ptr[xx + (height == 16 ? wide : 0)];
 
 		}

workspace/TS100/src/Translation.c

@@ -6,29 +6,72 @@
  */
 #include "Translation.h"
 
-#ifdef LANG_EN
-const char* SettingsLongNames[16] = {
-/*These are all the help text for all the settings.*/
-/*No requirements on spacing or length*/
-"Power source. Sets cutoff voltage. <DC 10V> <S 3.3V per cell>",    //Power Source
-		"Sleep Temperature <C>",    //Sleep Temp
-		"Sleep Timeout <Minutes>",    //Sleep Timeout
-		"Shutdown Timeout <Minutes>",    //Shutdown Time
-		"Motion Sensitivity <0.Off 1.least sensitive 9.most sensitive>",    //Motion Sensitivity
-		"Temperature Unit <C=Celsius F=Fahrenheit>",    //Temp Unit
-		"Display detailed information in a smaller font on the idle screen.",    //Detailed Information
-		"Display Orientation <A. Automatic L. Left Handed R. Right Handed>",    //Orientation
-		"Enable front key enters boost mode 450C mode when soldering",    //Boost enable
-		"Temperature when in \"boost\" mode",    //Boost Temp
-		"Automatically starts the iron into soldering on power up. T=Soldering, S= Sleep mode,F=Off",    //Auto start
-		"Blink the temperature on the cooling screen while the tip is still hot.",    //Cooling Blink
-		"Calibrate tip offset.",    //Calibrate Tip
-		"Reset all settings",    //Reset Settings
-		"VIN Calibration. Buttons adjust, long press to exit",    //VIN Cal
-		"Display detailed information while soldering",//ADV SLD
-		};
+// TEMPLATES for short names - choose one and use it as base for your translation:
 
-const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
+//const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
+//const char* SettingsShortNames[16][2] = {
+//    /* (<= 5) Power source (DC or batt)          */ {"PWRSC"},
+//    /* (<= 4) Sleep temperature                  */ {"STMP"},
+//    /* (<= 4) Sleep timeout                      */ {"STME"},
+//    /* (<= 5) Shutdown timeout                   */ {"SHTME"},
+//    /* (<= 6) Motion sensitivity level           */ {"MSENSE"},
+//    /* (<= 6) Temperature in F and C             */ {"TMPUNT"},
+//    /* (<= 6) Advanced idle display mode enabled */ {"ADVIDL"},
+//    /* (<= 6) Display rotation mode              */ {"DSPROT"},
+//    /* (<= 6) Boost enabled                      */ {"BOOST"},
+//    /* (<= 4) Boost temperature                  */ {"BTMP"},
+//    /* (<= 6) Automatic start mode               */ {"ASTART"},
+//    /* (<= 6) Cooldown blink                     */ {"CLBLNK"},
+//    /* (<= 8) Temperature calibration enter menu */ {"TMP CAL?"},
+//    /* (<= 8) Settings reset command             */ {"RESET?"},
+//    /* (<= 8) Calibrate input voltage            */ {"CAL VIN?"},
+//    /* (<= 6) Advanced soldering screen enabled  */ {"ADVSLD"},
+//};
+
+//const enum ShortNameType SettingsShortNameType = SHORT_NAME_DOUBLE_LINE;
+//const char* SettingsShortNames[16][2] = {
+//    /* (<= 11) Power source (DC or batt)          */ {"Power", "source"},
+//    /* (<=  9) Sleep temperature                  */ {"Sleep", "temp"},
+//    /* (<=  9) Sleep timeout                      */ {"Sleep", "timeout"},
+//    /* (<= 11) Shutdown timeout                   */ {"Shutdown", "timeout"},
+//    /* (<= 13) Motion sensitivity level           */ {"Motion", "sensitivity"},
+//    /* (<= 13) Temperature in F and C             */ {"Temperature", "units"},
+//    /* (<= 13) Advanced idle display mode enabled */ {"Detailed", "idle screen"},
+//    /* (<= 13) Display rotation mode              */ {"Display", "orientation"},
+//    /* (<= 13) Boost enabled                      */ {"Boost mode", "enabled"},
+//    /* (<=  9) Boost temperature                  */ {"Boost", "temp"},
+//    /* (<= 13) Automatic start mode               */ {"Auto", "start"},
+//    /* (<= 13) Cooldown blink                     */ {"Cooldown", "blink"},
+//    /* (<= 16) Temperature calibration enter menu */ {"Calibrate", "temperature?"},
+//    /* (<= 16) Settings reset command             */ {"Factory", "Reset?"},
+//    /* (<= 16) Calibrate input voltage            */ {"Calibrate", "input voltage?"},
+//    /* (<= 13) Advanced soldering screen enabled  */ {"Detailed", "solder screen"},
+//};
+
+#ifdef LANG_EN
+const char* SettingsLongNames[16] =
+		{
+				// These are all the help text for all the settings.
+				// No requirements on spacing or length.
+				/* Power source (DC or batt)          */"Power source. Sets cutoff voltage. <DC 10V> <S 3.3V per cell>",
+				/* Sleep temperature                  */"Sleep Temperature <C>",
+				/* Sleep timeout                      */"Sleep Timeout <Minutes/Seconds>",
+				/* Shutdown timeout                   */"Shutdown Timeout <Minutes>",
+				/* Motion sensitivity level           */"Motion Sensitivity <0.Off 1.least sensitive 9.most sensitive>",
+				/* Temperature in F and C             */"Temperature Unit <C=Celsius F=Fahrenheit>",
+				/* Advanced idle display mode enabled */"Display detailed information in a smaller font on the idle screen.",
+				/* Display rotation mode              */"Display Orientation <A. Automatic L. Left Handed R. Right Handed>",
+				/* Boost enabled                      */"Enable front key enters boost mode 450C mode when soldering",
+				/* Boost temperature                  */"Temperature when in \"boost\" mode",
+				/* Automatic start mode               */"Automatically starts the iron into soldering on power up. T=Soldering, S= Sleep mode,F=Off",
+				/* Cooldown blink                     */"Blink the temperature on the cooling screen while the tip is still hot.",
+				/* Temperature calibration enter menu */"Calibrate tip offset.",
+				/* Settings reset command             */"Reset all settings",
+				/* Calibrate input voltage            */"VIN Calibration. Buttons adjust, long press to exit",
+				/* Advanced soldering screen enabled  */"Display detailed information while soldering", };
+
+const char* SettingsCalibrationWarning =
+		"Please ensure the tip is at room temperature before continuing!";
 const char* UVLOWarningString = "LOW VOLT";    //Fixed width 8 chars
 const char* SleepingSimpleString = "Zzzz";    // Must be <= 4 chars
 const char* SleepingAdvancedString = "Sleeping...";    // <=17 chars
@@ -40,23 +83,817 @@ const char SettingFalseChar = 'F';
 const char SettingRightChar = 'R';
 const char SettingLeftChar = 'L';
 const char SettingAutoChar = 'A';
+
+const enum ShortNameType SettingsShortNameType = SHORT_NAME_DOUBLE_LINE;
+const char* SettingsShortNames[16][2] = {
+/* (<= 11) Power source (DC or batt)          */{ "Power", "source" },
+/* (<=  9) Sleep temperature                  */{ "Sleep", "temp" },
+/* (<=  9) Sleep timeout                      */{ "Sleep", "timeout" },
+/* (<= 11) Shutdown timeout                   */{ "Shutdown", "timeout" },
+/* (<= 13) Motion sensitivity level           */{ "Motion", "sensitivity" },
+/* (<= 13) Temperature in F and C             */{ "Temperature", "units" },
+/* (<= 13) Advanced idle display mode enabled */{ "Detailed", "idle screen" },
+/* (<= 13) Display rotation mode              */{ "Display", "orientation" },
+/* (<= 13) Boost enabled                      */{ "Boost mode", "enabled" },
+/* (<=  9) Boost temperature                  */{ "Boost", "temp" },
+/* (<= 13) Automatic start mode               */{ "Auto", "start" },
+/* (<= 13) Cooldown blink                     */{ "Cooldown", "blink" },
+/* (<= 16) Temperature calibration enter menu */{ "Calibrate", "temperature?" },
+/* (<= 16) Settings reset command             */{ "Factory", "Reset?" },
+		/* (<= 16) Calibrate input voltage            */{ "Calibrate",
+				"input voltage?" },
+		/* (<= 13) Advanced soldering screen enabled  */{ "Detailed",
+				"solder screen" }, };
 #endif
 
-const char* SettingsShortNames[16] = { /**/
-"PWRSC ",    // Power Source (DC or batt)
-		"STMP ", 	// Sleep Temperature
-		"STME ", 	// Sleep Timeout
-		"SHTME ",    // Shutdown Temperature
-		"MSENSE ",    // Motion sensitivity level
-		"TMPUNT ",			//Temp in F and C
-		"ADVIDL ",    // Advanced idle display mode enable
-		"DSPROT ",    // Display rotation mode
-		"BOOST  ",    // Boost enabled
-		"BTMP ", 	// Boost temperature
-		"ASTART ",    // Automatic Start mode
-		"CLBLNK ",    // Cooldown blink
-		"TMP CAL?",    // Temperature calibration enter menu
-		"RESET? ",    // Settings reset command
-		"CAL VIN?",
-		"ADVSLD ", //advanced soldering screens
-		};
+#ifdef LANG_RU
+const char* SettingsLongNames[16] = {
+	// These are all the help text for all the settings.
+	// No requirements on spacing or length.
+	/* Power source (DC or batt)          */"Источник питания. Установка напряжения отключения. <DC 10V> <S 3.3 V на батарею>",
+	/* Sleep temperature                  */"Температура режима ожидания <С>",
+	/* Sleep timeout                      */"Время до перехода в режим ожидания <Минуты>",
+	/* Shutdown timeout                   */"Время до отключения <Минуты>",
+	/* Motion sensitivity level           */"Акселерометр <0. Выкл. 1. мин. чувствительный 9. макс. чувствительный>",
+	/* Temperature in F and C             */"В чем измерять температуру",
+	/* Advanced idle display mode enabled */"Показывать детальную информацию маленьким шрифтом на домашнем экране",
+	/* Display rotation mode              */"Ориентация дисплея <A. Автоматический, Л. Левая рука, П. Правая рука>",
+	/* Boost enabled                      */"Турбо-режим при удержании кнопки А при пайке ",
+	/* Boost temperature                  */"Температура в турбо-режиме",
+	/* Automatic start mode               */"Автоматический запуск паяльника при включении питания. T=Нагрев, S=Режим ожидания,F=Выкл.",
+	/* Cooldown blink                     */"Показывать температуру на экране охлаждения, пока жало остается горячим.",
+	/* Temperature calibration enter menu */"Калибровка термодатчика.",
+	/* Settings reset command             */"Сброс всех настроек.",
+	/* Calibrate input voltage            */"Калибровка напряжения входа. Настройка кнопками, нажать и удержать чтобы завершить.",
+	/* Advanced soldering screen enabled  */"Показывать детальную информацию при пайке.",
+};
+
+const char* SettingsCalibrationWarning = "Убедитесь, что жало остыло до комнатной температуры, прежде чем продолжать!";
+const char* UVLOWarningString = "БАТ РАЗР";    //Fixed width 8 chars
+const char* SleepingSimpleString = "Хррр";// Must be <= 4 chars
+const char* SleepingAdvancedString = "Ожидание...";// <=17 chars
+const char* WarningSimpleString = " АЙ!";//Must be <= 4 chars
+const char* WarningAdvancedString = "ОСТОРОЖНО! ГОРЯЧО";
+
+const char SettingTrueChar = '+';
+const char SettingFalseChar = '-';
+/*
+ * #TODO change support for multibyte constants here
+ const char SettingRightChar = 'П';
+ const char SettingLeftChar = 'Л';
+ const char SettingAutoChar = 'A';*/
+
+const char SettingRightChar = 'R';
+const char SettingLeftChar = 'L';
+const char SettingAutoChar = 'A';
+
+const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
+const char* SettingsShortNames[16][2] = {
+	/* (<= 5) Power source (DC or batt)          */{"ИстП  "},
+	/* (<= 4) Sleep temperature                  */{"Тожд"},
+	/* (<= 4) Sleep timeout                      */{"Вожд "},
+	/* (<= 5) Shutdown timeout                   */{"Тоткл "},
+	/* (<= 6) Motion sensitivity level           */{"ЧувсДв "},
+	/* (<= 6) Temperature in F and C             */{"ЕдТемп "},
+	/* (<= 6) Advanced idle display mode enabled */{"ИнфОжд "},
+	/* (<= 6) Display rotation mode              */{"ПовЭкр "},
+	/* (<= 6) Boost enabled                      */{"Турбо  "},
+	/* (<= 4) Boost temperature                  */{"Ттур "},
+	/* (<= 6) Automatic start mode               */{"Астарт"},
+	/* (<= 6) Cooldown blink                     */{"Охлажд "},
+	/* (<= 8) Temperature calibration enter menu */{"КалибрТ"},
+	/* (<= 8) Settings reset command             */{"СБРОС?"},
+	/* (<= 8) Calibrate input voltage            */{"КалибрU?"},
+	/* (<= 6) Advanced soldering screen enabled  */{"ИнфПай "},
+};
+#endif
+
+#ifdef LANG_ES
+const char* SettingsLongNames[16] = {
+	// These are all the help text for all the settings.
+	// No requirements on spacing or length.
+	/* Power source (DC or batt)          */"Fuente de energía. Ajusta el límite inferior de voltaje. <DC=10V S=3.3V por celda>",
+	/* Sleep temperature                  */"Temperatura en reposo. <C>",
+	/* Sleep timeout                      */"Tiempo hasta activar reposo. <Minutos>",
+	/* Shutdown timeout                   */"Tiempo hasta apagado. <Minutos>",
+	/* Motion sensitivity level           */"Sensibilidad del movimiento. <0=Apagado 1=El menos sensible 9=El más sensible>",
+	/* Temperature in F and C             */"Unidad de temperatura.",
+	/* Advanced idle display mode enabled */"Display detailed information in a smaller font on the idle screen.",
+	/* Display rotation mode              */"Orientación de la pantalla <A=Automático I=Mano izquierda D=Mano derecha>",
+	/* Boost enabled                      */"Activar el botón \"Boost\" en modo soldadura.",
+	/* Boost temperature                  */"Temperatura en modo \"Boost\". <C>",
+	/* Automatic start mode               */"Iniciar modo soldadura en el encendido. <V=Sí S=Modo reposo F=No>",
+	/* Cooldown blink                     */"Parpadea la temperatura en el enfriamiento si la punta sigue caliente."
+	/* Temperature calibration enter menu */"Calibrate tip offset.",
+	/* Settings reset command             */"Reset all settings",
+	/* Calibrate input voltage            */"VIN Calibration. Buttons adjust, long press to exit",
+	/* Advanced soldering screen enabled  */"Display detailed information while soldering",
+};
+
+const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
+const char* UVLOWarningString = "LOW VOLT";    //Fixed width 8 chars
+const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
+const char* SleepingAdvancedString = "Sleeping...";// <=17 chars
+const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
+const char* WarningAdvancedString = "WARNING! TIP HOT!";
+
+const char SettingTrueChar = 'T';
+const char SettingFalseChar = 'F';
+const char SettingRightChar = 'R';
+const char SettingLeftChar = 'L';
+const char SettingAutoChar = 'A';
+
+const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
+const char* SettingsShortNames[16][2] = {
+	/* (<= 5) Power source (DC or batt)          */{"PWRSC"},
+	/* (<= 4) Sleep temperature                  */{"STMP"},
+	/* (<= 4) Sleep timeout                      */{"STME"},
+	/* (<= 5) Shutdown timeout                   */{"SHTME"},
+	/* (<= 6) Motion sensitivity level           */{"MSENSE"},
+	/* (<= 6) Temperature in F and C             */{"TMPUNT"},
+	/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
+	/* (<= 6) Display rotation mode              */{"DSPROT"},
+	/* (<= 6) Boost enabled                      */{"BOOST"},
+	/* (<= 4) Boost temperature                  */{"BTMP"},
+	/* (<= 6) Automatic start mode               */{"ASTART"},
+	/* (<= 6) Cooldown blink                     */{"CLBLNK"},
+	/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
+	/* (<= 8) Settings reset command             */{"RESET?"},
+	/* (<= 8) Calibrate input voltage            */{"CAL VIN?"},
+	/* (<= 6) Advanced soldering screen enabled  */{"ADVSLD"},
+};
+#endif
+
+#ifdef LANG_SE
+const char* SettingsLongNames[16] = {
+	// These are all the help text for all the settings.
+	// No requirements on spacing or length.
+	/* Power source (DC or batt)          */"Источник питания. Установка напряжения отключения. <DC 10V> <S 3.3 V на батарею>",
+	/* Sleep temperature                  */"Температура Сна  <С>",
+	/* Sleep timeout                      */"Переход в режим Сна <Минуты>",
+	/* Shutdown timeout                   */"Переходит в режим ожидания <Минуты>",
+	/* Motion sensitivity level           */"Акселерометр <0. Выкл. 1. мин. чувствительный 9. макс. чувствительный>",
+	/* Temperature in F and C             */"В чем измерять температуру",
+	/* Advanced idle display mode enabled */"Display detailed information in a smaller font on the idle screen.",
+	/* Display rotation mode              */"Ориентация Дисплея <A. Автоматический L. Левая Рука R. Правая Рука>",
+	/* Boost enabled                      */"Активация  кнопки A для Турбо режима до  450С при пайке ",
+	/* Boost temperature                  */"Установка температуры для Турбо режима",
+	/* Automatic start mode               */"Автоматический запуск паяльника при включении питания. T=Нагрев, S= Режим Сна,F=Выкл.",
+	/* Cooldown blink                     */"Мигает температура на экране охлаждения, пока жало остается горячим."
+	/* Temperature calibration enter menu */"Calibrate tip offset.",
+	/* Settings reset command             */"Reset all settings",
+	/* Calibrate input voltage            */"VIN Calibration. Buttons adjust, long press to exit",
+	/* Advanced soldering screen enabled  */"Display detailed information while soldering",
+};
+
+const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
+const char* UVLOWarningString = "LOW VOLT";    //Fixed width 8 chars
+const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
+const char* SleepingAdvancedString = "Sleeping...";// <=17 chars
+const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
+const char* WarningAdvancedString = "WARNING! TIP HOT!";
+
+const char SettingTrueChar = 'T';
+const char SettingFalseChar = 'F';
+const char SettingRightChar = 'R';
+const char SettingLeftChar = 'L';
+const char SettingAutoChar = 'A';
+
+const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
+const char* SettingsShortNames[16][2] = {
+	/* (<= 5) Power source (DC or batt)          */{"PWRSC"},
+	/* (<= 4) Sleep temperature                  */{"STMP"},
+	/* (<= 4) Sleep timeout                      */{"STME"},
+	/* (<= 5) Shutdown timeout                   */{"SHTME"},
+	/* (<= 6) Motion sensitivity level           */{"MSENSE"},
+	/* (<= 6) Temperature in F and C             */{"TMPUNT"},
+	/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
+	/* (<= 6) Display rotation mode              */{"DSPROT"},
+	/* (<= 6) Boost enabled                      */{"BOOST"},
+	/* (<= 4) Boost temperature                  */{"BTMP"},
+	/* (<= 6) Automatic start mode               */{"ASTART"},
+	/* (<= 6) Cooldown blink                     */{"CLBLNK"},
+	/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
+	/* (<= 8) Settings reset command             */{"RESET?"},
+	/* (<= 8) Calibrate input voltage            */{"CAL VIN?"},
+	/* (<= 6) Advanced soldering screen enabled  */{"ADVSLD"},
+};
+#endif
+
+#ifdef LANG_IT
+const char* SettingsLongNames[16] = {
+	// These are all the help text for all the settings.
+	// No requirements on spacing or length.
+	/* Power source (DC or batt)          */"Sorgente di alimentazione; imposta il limite minimo di tensione <DC: 10V; S: 3.3V per cella>",
+	/* Sleep temperature                  */"Temperatura standby <°C>",
+	/* Sleep timeout                      */"Timeout standby <minuti/secondi>",
+	/* Shutdown timeout                   */"Timeout spegnimento <minuti>",
+	/* Motion sensitivity level           */"Sensibilità al movimento <0: nessuna; 1: minima; 9: massima>",
+	/* Temperature in F and C             */"Unità di misura della temperatura <C: Celsius; F: Farenheit>",
+	/* Advanced idle display mode enabled */"Mostra informazioni dettagliate con un carattere più piccolo sulla schermata di inattività",
+	/* Display rotation mode              */"Orientamento del display <A: automatico; S: mano sinistra; D: mano destra>",
+	/* Boost enabled                      */"Il tasto anteriore attiva la modalità \"boost\" durante la saldatura",
+	/* Boost temperature                  */"Temperatura in modalità \"boost\"",
+	/* Automatic start mode               */"Attiva automaticamente il saldatore quando viene alimentato <A: saldatura; S: standby; D: disattiva>",
+	/* Cooldown blink                     */"Durante il raffreddamento mostra la temperatura sul display se la punta è ancora calda"
+	/* Temperature calibration enter menu */"Calibra l'offset della punta",
+	/* Settings reset command             */"Ripristina tutte le impostazioni",
+	/* Calibrate input voltage            */"Calibra la tensione in entrata; regola con i bottoni, tieni permuto per uscire",
+	/* Advanced soldering screen enabled  */"Mostra informazioni dettagliate mentre stai saldando",
+};
+
+const char* SettingsCalibrationWarning = "Assicurati che la punta si trovi a temperatura ambiente prima di continuare!";
+const char* UVLOWarningString = "LOW VOLT";    //Fixed width 8 chars
+const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
+const char* SleepingAdvancedString = "Standby";// <=17 chars
+const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
+const char* WarningAdvancedString = "ATTENZIONE! PUNTA CALDA!";
+
+const char SettingTrueChar = 'A';
+const char SettingFalseChar = 'D';
+const char SettingRightChar = 'D';
+const char SettingLeftChar = 'S';
+const char SettingAutoChar = 'A';
+
+const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
+const char* SettingsShortNames[16][2] = {
+	/* (<= 5) Power source (DC or batt)          */{"PWRSC"},
+	/* (<= 4) Sleep temperature                  */{"STMP"},
+	/* (<= 4) Sleep timeout                      */{"STME"},
+	/* (<= 5) Shutdown timeout                   */{"SHTME"},
+	/* (<= 6) Motion sensitivity level           */{"MSENSE"},
+	/* (<= 6) Temperature in F and C             */{"TMPUNT"},
+	/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
+	/* (<= 6) Display rotation mode              */{"DSPROT"},
+	/* (<= 6) Boost enabled                      */{"BOOST"},
+	/* (<= 4) Boost temperature                  */{"BTMP"},
+	/* (<= 6) Automatic start mode               */{"ASTART"},
+	/* (<= 6) Cooldown blink                     */{"CLBLNK"},
+	/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
+	/* (<= 8) Settings reset command             */{"RESET?"},
+	/* (<= 8) Calibrate input voltage            */{"CAL VIN?"},
+	/* (<= 6) Advanced soldering screen enabled  */{"ADVSLD"},
+};
+#endif
+
+#ifdef LANG_FR
+const char* SettingsLongNames[16] = {
+	// These are all the help text for all the settings.
+	// No requirements on spacing or length.
+	/* Power source (DC or batt)          */"Type d\'alimentation. Regle la tension de coupure. <DC=10V S=3.3V par cellules>",
+	/* Sleep temperature                  */"Temperature en veille. <C>",
+	/* Sleep timeout                      */"Temps avant mise en veille. <Minutes>",
+	/* Shutdown timeout                   */"Temps avant extinction. <Minutes>",
+	/* Motion sensitivity level           */"Sensibilitee du capteur de mouvement. <0=Inactif 1=Peu sensible 9=Tres sensible>",
+	/* Temperature in F and C             */"Unitee de temperature.",
+	/* Advanced idle display mode enabled */"Afficher des informations detaillees en petit lors de la veille",
+	/* Display rotation mode              */"Orientation de l\'affichage. <A=Automatique G=Gaucher D=Droitier>",
+	/* Boost enabled                      */"Active le mode \"Boost\" 450C sur le bouton de devant pendant la soudure.",
+	/* Boost temperature                  */"Temperature du mode \"Boost\". <C>",
+	/* Automatic start mode               */"Demarre automatiquement la soudure a l\'allumage. <A=Active, V=Mode Veille, D=Desactive>",
+	/* Cooldown blink                     */"Fait clignotter la temperature lors du refroidissement pendant que la panne est chaude."
+	/* Temperature calibration enter menu */"Compenser l\'erreur de la panne",
+	/* Settings reset command             */"Reinitialiser tout les reglages",
+	/* Calibrate input voltage            */"Calibration VIN. Boutons pour ajuster, appui long pour quitter",
+	/* Advanced soldering screen enabled  */"Afficher des informations detaillees pendant la soudure",
+};
+
+const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
+const char* UVLOWarningString = "LOW VOLT";    //Fixed width 8 chars
+const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
+const char* SleepingAdvancedString = "Sleeping...";// <=17 chars
+const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
+const char* WarningAdvancedString = "WARNING! TIP HOT!";
+
+const char SettingTrueChar = 'T';
+const char SettingFalseChar = 'F';
+const char SettingRightChar = 'R';
+const char SettingLeftChar = 'L';
+const char SettingAutoChar = 'A';
+
+const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
+const char* SettingsShortNames[16][2] = {
+	/* (<= 5) Power source (DC or batt)          */{"PWRSC"},
+	/* (<= 4) Sleep temperature                  */{"STMP"},
+	/* (<= 4) Sleep timeout                      */{"STME"},
+	/* (<= 5) Shutdown timeout                   */{"SHTME"},
+	/* (<= 6) Motion sensitivity level           */{"MSENSE"},
+	/* (<= 6) Temperature in F and C             */{"TMPUNT"},
+	/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
+	/* (<= 6) Display rotation mode              */{"DSPROT"},
+	/* (<= 6) Boost enabled                      */{"BOOST"},
+	/* (<= 4) Boost temperature                  */{"BTMP"},
+	/* (<= 6) Automatic start mode               */{"ASTART"},
+	/* (<= 6) Cooldown blink                     */{"CLBLNK"},
+	/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
+	/* (<= 8) Settings reset command             */{"RESET?"},
+	/* (<= 8) Calibrate input voltage            */{"CAL VIN?"},
+	/* (<= 6) Advanced soldering screen enabled  */{"ADVSLD"},
+};
+#endif
+
+#ifdef LANG_DE
+const char* SettingsLongNames[16] = {
+	// These are all the help text for all the settings.
+	// No requirements on spacing or length.
+	/* Power source (DC or batt)          */"Spannungsquelle (Abschaltspannung) <DC=10V, nS=n*3.3V für n LiIon-Zellen>",
+	/* Sleep temperature                  */"Ruhetemperatur (In der eingestellten Einheit)",
+	/* Sleep timeout                      */"Ruhemodus nach <Sekunden/Minuten>",
+	/* Shutdown timeout                   */"Abschaltzeit <Minuten>",
+	/* Motion sensitivity level           */"Bewegungsempfindlichkeit <0=Aus, 1=Minimal ... 9=Maximal>",
+	/* Temperature in F and C             */"Temperatureinheit <C=Celsius, F=Fahrenheit>",
+	/* Advanced idle display mode enabled */"Detaillierte Anzeige im Ruhemodus <T=An, F=Aus>",
+	/* Display rotation mode              */"Ausrichtung der Anzeige <A=Auto, L=Linkshändig, R=Rechtshändig>",
+	/* Boost enabled                      */"Vordere Taste für Temperaturboost verwenden <T=An, F=Aus>",
+	/* Boost temperature                  */"Temperatur im Boostmodus  (In der eingestellten Einheit)",
+	/* Automatic start mode               */"Automatischer Start des Lötmodus beim Einschalten der Spannungsversorgung. <T=An, F=Aus>",
+	/* Cooldown blink                     */"Blinkende Temperaturanzeige beim Abkühlen, solange heiß. <T=An, F=Aus>"
+	/* Temperature calibration enter menu */"Kalibrierung der Lötspitzentemperatur",
+	/* Settings reset command             */"Alle Einstellungen zurücksetzen",
+	/* Calibrate input voltage            */"Kalibrierung der Eingangsspannung. Kurzer Tastendruck zum Einstellen, langer Tastendruck zum Verlassen.",
+	/* Advanced soldering screen enabled  */"Detaillierte Anzeige im Lötmodus <T=An, F=Aus>",
+};
+
+const char* SettingsCalibrationWarning = "Vor dem Fortfahren muss die Lötspitze vollständig abgekühlt sein!";
+const char* UVLOWarningString = "LOW VOLT";    //Fixed width 8 chars
+const char* SleepingSimpleString = "Zzz ";// Must be <= 4 chars
+const char* SleepingAdvancedString = "Ruhemodus...";// <=17 chars
+const char* WarningSimpleString = "HEIß";//Must be <= 4 chars
+const char* WarningAdvancedString = "Achtung! Spitze Heiß!";
+
+const char SettingTrueChar = 'T';
+const char SettingFalseChar = 'F';
+const char SettingRightChar = 'R';
+const char SettingLeftChar = 'L';
+const char SettingAutoChar = 'A';
+
+const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
+const char* SettingsShortNames[16][2] = {
+	/* (<= 5) Power source (DC or batt)          */{"PWRSC"},
+	/* (<= 4) Sleep temperature                  */{"STMP"},
+	/* (<= 4) Sleep timeout                      */{"STME"},
+	/* (<= 5) Shutdown timeout                   */{"SHTME"},
+	/* (<= 6) Motion sensitivity level           */{"MSENSE"},
+	/* (<= 6) Temperature in F and C             */{"TMPUNT"},
+	/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
+	/* (<= 6) Display rotation mode              */{"DSPROT"},
+	/* (<= 6) Boost enabled                      */{"BOOST"},
+	/* (<= 4) Boost temperature                  */{"BTMP"},
+	/* (<= 6) Automatic start mode               */{"ASTART"},
+	/* (<= 6) Cooldown blink                     */{"CLBLNK"},
+	/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
+	/* (<= 8) Settings reset command             */{"RESET?"},
+	/* (<= 8) Calibrate input voltage            */{"CAL VIN?"},
+	/* (<= 6) Advanced soldering screen enabled  */{"ADVSLD"},
+};
+#endif
+
+#ifdef LANG_SK
+const char* SettingsLongNames[16] = {
+	// These are all the help text for all the settings.
+	// No requirements on spacing or length.
+	/* Power source (DC or batt)          */"Zdroj napatia. Nastavit napatie pre vypnutie (cutoff)  <DC=10V, nS=n*3.3V pre LiIon clanky>",
+	/* Sleep temperature                  */"Kludova teplota (v nastavenych jednotkach)",
+	/* Sleep timeout                      */"Kludovy rezim po <sekundach/minutach>",
+	/* Shutdown timeout                   */"Cas na vypnutie <minuty>",
+	/* Motion sensitivity level           */"Citlivost detekcie pohybu <0=Vyp, 1=Min ... 9=Max>",
+	/* Temperature in F and C             */"Jednotky merania teploty <C=stupne Celzia, F=stupne Fahrenheita>",
+	/* Advanced idle display mode enabled */"Zobrazit detailne informacie v kludovom rezime <T=Zap, F=Vyp>",
+	/* Display rotation mode              */"Orientacia displeja <A=Auto, L=Lavak, R=Pravak>",
+	/* Boost enabled                      */"Povolit tlacidlo pre prudky nahrev <T=Zap, F=Vyp>",
+	/* Boost temperature                  */"Cielova teplota pre prudky nahrev (v nastavenych jednotkach)",
+	/* Automatic start mode               */"Pri starte spustit rezim spajkovania <T=Zap, F=Vyp, S=Spanok>",
+	/* Cooldown blink                     */"Blikanie ukazovatela teploty pocas chladnutia hrotu <T=Zap, F=Vyp>"
+	/* Temperature calibration enter menu */"Kalibracia posunu hrotu",
+	/* Settings reset command             */"Tovarenske nastavenia",
+	/* Calibrate input voltage            */"Kalibracia VIN. Kratke stlacenie meni nastavenie, dlhe stlacenie pre navrat",
+	/* Advanced soldering screen enabled  */"Zobrazenie detailov pocas spajkovania <T=Zap, F=Vyp>",
+};
+
+const char* SettingsCalibrationWarning = "Najprv sa prosim uistite, ze hrot ma izbovu teplotu!";
+const char* UVLOWarningString = "LOW VOLT";    //Fixed width 8 chars
+const char* SleepingSimpleString = "Chrr";// Must be <= 4 chars
+const char* SleepingAdvancedString = "Kludovy rezim...";// <=17 chars
+const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
+const char* WarningAdvancedString = "Pozor! Hrot je horuci!";
+
+const char SettingTrueChar = 'T';
+const char SettingFalseChar = 'F';
+const char SettingRightChar = 'R';
+const char SettingLeftChar = 'L';
+const char SettingAutoChar = 'A';
+
+const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
+const char* SettingsShortNames[16][2] = {
+	/* (<= 5) Power source (DC or batt)          */{"PWRSC"},
+	/* (<= 4) Sleep temperature                  */{"STMP"},
+	/* (<= 4) Sleep timeout                      */{"STME"},
+	/* (<= 5) Shutdown timeout                   */{"SHTME"},
+	/* (<= 6) Motion sensitivity level           */{"MSENSE"},
+	/* (<= 6) Temperature in F and C             */{"TMPUNT"},
+	/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
+	/* (<= 6) Display rotation mode              */{"DSPROT"},
+	/* (<= 6) Boost enabled                      */{"BOOST"},
+	/* (<= 4) Boost temperature                  */{"BTMP"},
+	/* (<= 6) Automatic start mode               */{"ASTART"},
+	/* (<= 6) Cooldown blink                     */{"CLBLNK"},
+	/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
+	/* (<= 8) Settings reset command             */{"RESET?"},
+	/* (<= 8) Calibrate input voltage            */{"CAL VIN?"},
+	/* (<= 6) Advanced soldering screen enabled  */{"ADVSLD"},
+};
+#endif
+
+#ifdef LANG_TR
+const char* SettingsLongNames[16] = {
+	// These are all the help text for all the settings.
+	// No requirements on spacing or length.
+	/* Power source (DC or batt)          */"Güç Kaynağı. kesim geriliminı ayarlar. <DC 10V> <S 3.3V hücre başına>",
+	/* Sleep temperature                  */"Uyku Sıcaklığı <C>",
+	/* Sleep timeout                      */"Uyku Zaman Aşımı <Dakika/Saniye>",
+	/* Shutdown timeout                   */"Kapatma Zaman Aşımı <Dakika>",
+	/* Motion sensitivity level           */"Hareket Hassasiyeti <0.Kapalı 1.En az duyarlı 9.En duyarlı>",
+	/* Temperature in F and C             */"Sıcaklık Ünitesi <C=Celsius F=Fahrenheit>",
+	/* Advanced idle display mode enabled */"Boş ekranda ayrıntılı bilgileri daha küçük bir yazı tipi ile göster.",
+	/* Display rotation mode              */"Görüntü Yönlendirme <A. Otomatik L. Solak R. Sağlak>",
+	/* Boost enabled                      */"Lehimleme yaparken ön tuşa basmak Boost moduna sokar(450C)",
+	/* Boost temperature                  */"\"boost\" Modu Derecesi",
+	/* Automatic start mode               */"Güç verildiğinde otomatik olarak lehimleme modunda başlat. T=Lehimleme Modu, S= Uyku Modu,F=Kapalı",
+	/* Cooldown blink                     */"Soğutma ekranında uç hala sıcakken derece yanıp sönsün.",
+	/* Temperature calibration enter menu */"Ucu kalibre et.",
+	/* Settings reset command             */"Bütün ayarları sıfırla",
+	/* Calibrate input voltage            */"VIN Kalibrasyonu. Düğmeler ayarlar, çıkmak için uzun bas.",
+	/* Advanced soldering screen enabled  */"Lehimleme yaparken detaylı bilgi göster",
+};
+
+const char* SettingsCalibrationWarning = "Lütfen devam etmeden önce ucun oda sıcaklığında olduğunu garantiye alın!";
+const char* UVLOWarningString = "LOW VOLT";    //Fixed width 8 chars
+const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
+const char* SleepingAdvancedString = "Uyuyor...";// <=17 chars
+const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
+const char* WarningAdvancedString = "UYARI! UÇ SICAK!";
+
+const char SettingTrueChar = 'T';
+const char SettingFalseChar = 'F';
+const char SettingRightChar = 'R';
+const char SettingLeftChar = 'L';
+const char SettingAutoChar = 'A';
+
+const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
+const char* SettingsShortNames[16][2] = {
+	/* (<= 5) Power source (DC or batt)          */{"PWRSC"},
+	/* (<= 4) Sleep temperature                  */{"STMP"},
+	/* (<= 4) Sleep timeout                      */{"STME"},
+	/* (<= 5) Shutdown timeout                   */{"SHTME"},
+	/* (<= 6) Motion sensitivity level           */{"MSENSE"},
+	/* (<= 6) Temperature in F and C             */{"TMPUNT"},
+	/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
+	/* (<= 6) Display rotation mode              */{"DSPROT"},
+	/* (<= 6) Boost enabled                      */{"BOOST"},
+	/* (<= 4) Boost temperature                  */{"BTMP"},
+	/* (<= 6) Automatic start mode               */{"ASTART"},
+	/* (<= 6) Cooldown blink                     */{"CLBLNK"},
+	/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
+	/* (<= 8) Settings reset command             */{"RESET?"},
+	/* (<= 8) Calibrate input voltage            */{"CAL VIN?"},
+	/* (<= 6) Advanced soldering screen enabled  */{"ADVSLD"},
+};
+#endif
+
+#ifdef LANG_HR
+const char* SettingsLongNames[16] = {
+	// These are all the help text for all the settings.
+	// No requirements on spacing or length.
+	/* Power source (DC or batt)          */"Izvor napajanja. Postavlja napon isključivanja. <DC 10V> <S 3.3V po ćeliji>",
+	/* Sleep temperature                  */"Temperatura spavanja. <C>",
+	/* Sleep timeout                      */"Vrijeme spavanja. <Minute/Sekunde>",
+	/* Shutdown timeout                   */"Vrijeme gašenja. <Minutes>",
+	/* Motion sensitivity level           */"Osjetljivost prepoznavanja pokreta. <0=Ugašeno, 1=Najmanje osjetljivo, 9=Najosjetljivije>",
+	/* Temperature in F and C             */"Jedinica temperature. <C=Celzij, F=Fahrenheit>",
+	/* Advanced idle display mode enabled */"Prikazivanje detaljnih informacija manjim fontom tijekom čekanja.",
+	/* Display rotation mode              */"Orijentacija ekrana. <A=Automatski, L=Ljevoruki, D=Desnoruki>",
+	/* Boost enabled                      */"Držanjem prednjeg gumba prilikom lemljenja aktivira se pojačani (Boost) način.",
+	/* Boost temperature                  */"Temperatura u pojačanom (Boost) načinu.",
+	/* Automatic start mode               */"Početno stanje lemilice po uključivanju napajanja. <+=Lemljenje, S=Spavanje, -=Ugašeno>",
+	/* Cooldown blink                     */"Bljeskanje temperature prilikom hlađenja, ako je lemilica vruća.",
+	/* Temperature calibration enter menu */"Kalibriranje temperature mjeri razliku temperature vška i temperature drške, dok je lemilica hladna.",
+	/* Settings reset command             */"Vraćanje svih postavki.",
+	/* Calibrate input voltage            */"Kalibracija ulaznog napona. Podešavanje gumbima, dugački pritisak za kraj.",
+	/* Advanced soldering screen enabled  */"Prikazivanje detaljnih informacija tijekom lemljenja.",
+};
+
+const char* SettingsCalibrationWarning = "Provjerite da je vršak ohlađen na sobnu temperaturu prije nego što nastavite!";
+const char* UVLOWarningString = "NAPON!!!";    //Fixed width 8 chars
+const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
+const char* SleepingAdvancedString = "Spavanje...";// <=17 chars
+const char* WarningSimpleString = "VRUĆ";//Must be <= 4 chars
+const char* WarningAdvancedString = "OPREZ! Vršak je vruć!";
+
+const char SettingTrueChar = '+';
+const char SettingFalseChar = '-';
+const char SettingRightChar = 'D';
+const char SettingLeftChar = 'L';
+const char SettingAutoChar = 'A';
+
+const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
+const char* SettingsShortNames[16][2] = {
+	/* (<= 5) Power source (DC or batt)          */{"PWRSC"},
+	/* (<= 4) Sleep temperature                  */{"STMP"},
+	/* (<= 4) Sleep timeout                      */{"STME"},
+	/* (<= 5) Shutdown timeout                   */{"SHTME"},
+	/* (<= 6) Motion sensitivity level           */{"MSENSE"},
+	/* (<= 6) Temperature in F and C             */{"TMPUNT"},
+	/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
+	/* (<= 6) Display rotation mode              */{"DSPROT"},
+	/* (<= 6) Boost enabled                      */{"BOOST"},
+	/* (<= 4) Boost temperature                  */{"BTMP"},
+	/* (<= 6) Automatic start mode               */{"ASTART"},
+	/* (<= 6) Cooldown blink                     */{"CLBLNK"},
+	/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
+	/* (<= 8) Settings reset command             */{"RESET?"},
+	/* (<= 8) Calibrate input voltage            */{"CAL VIN?"},
+	/* (<= 6) Advanced soldering screen enabled  */{"ADVSLD"},
+};
+#endif
+
+#ifdef LANG_CS_CZ
+const char* SettingsLongNames[16] = {
+	/*These are all the help text for all the settings.*/
+	/*No requirements on spacing or length*/
+	"Zdroj napajeni. Pri nizsim napeti se odpoji <DC=10V, xS=x*3.3V pro LiPo,LiIon...>", //Power Source
+	"Teplota v rezimu spanku",//Sleep Temp
+	"Cas do rezimu spanku <Minut/Sekund>",//Sleep Timeout
+	"Cas do automatickeho vypnuti <Minut>",//Shutdown Time
+	"Citlivost detekce pohybu <0=Vyp, 1=Min, ... 9=Max>",//Motion Sensitivity
+	"Jednotky mereni teploty <C=Celsius, F=Fahrenheit>",//Temp Unit
+	"Zobrazit podrobnosti na vychozi obrazovce <Z=Zap, V=Vyp>",//Detailed Information
+	"Otoceni displaye <A=Auto, L=Levak, P=Pravak>",//Orientation
+	"Povolit boost drzenim leveho tlacitka pri pajeni <Z=Zap, V=Vyp>",//Boost enable
+	"Teplota pri boostu",//Boost Temp
+	"Pri startu ihned nahrivat hrot <Z=Zap, V=Vyp, S=Rezim spanku>",//Auto start
+	"Blikani teploty pri chladnuti, dokud je hrot horky <Z=Zap, V=Vyp>",//Cooling Blink
+	"Kalibrovat mereni teploty",//Calibrate Tip
+	"Obnovit tovarni nastaveni",//Reset Settings
+	"Kalibrovat vstupni napeti. Tlacitky upravte, podrzenim potvrdte.",//VIN Cal
+	"Zobrazit podrobnosti pri pajeni <Z=Zap, V=Vyp>",//ADV SLD
+};
+
+const char* SettingsCalibrationWarning = "Ujistete se, ze hrot ma pokojovou teplotu! "; //ending space needed
+const char* UVLOWarningString = "LOW VOLT";//Fixed width 8 chars
+const char* SleepingSimpleString = "Zzz ";// Must be <= 4 chars
+const char* SleepingAdvancedString = "Rezim spanku...";// <=17 chars
+const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
+const char* WarningAdvancedString = "!! HORKY HROT !!";// <= 16 chars
+
+const char SettingTrueChar = 'Z';
+const char SettingFalseChar = 'V';
+const char SettingRightChar = 'P';
+const char SettingLeftChar = 'L';
+const char SettingAutoChar = 'A';
+
+const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
+const char* SettingsShortNames[16][2] = {
+	/* (<= 5) Power source (DC or batt)          */{"PWRSC"},
+	/* (<= 4) Sleep temperature                  */{"STMP"},
+	/* (<= 4) Sleep timeout                      */{"STME"},
+	/* (<= 5) Shutdown timeout                   */{"SHTME"},
+	/* (<= 6) Motion sensitivity level           */{"MSENSE"},
+	/* (<= 6) Temperature in F and C             */{"TMPUNT"},
+	/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
+	/* (<= 6) Display rotation mode              */{"DSPROT"},
+	/* (<= 6) Boost enabled                      */{"BOOST"},
+	/* (<= 4) Boost temperature                  */{"BTMP"},
+	/* (<= 6) Automatic start mode               */{"ASTART"},
+	/* (<= 6) Cooldown blink                     */{"CLBLNK"},
+	/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
+	/* (<= 8) Settings reset command             */{"RESET?"},
+	/* (<= 8) Calibrate input voltage            */{"CAL VIN?"},
+	/* (<= 6) Advanced soldering screen enabled  */{"ADVSLD"},
+};
+#endif
+
+#ifdef LANG_HUN
+const char* SettingsLongNames[16] = {
+	/*These are all the help text for all the settings.*/
+	/*No requirements on spacing or length*/
+	"Áramforrás. Beállítja a lekapcsolási feszültséget. <DC 10V> <S 3.3V cellánként>", //Power Source
+	"Alvási hőmérséklet <C>",//Sleep Temp
+	"Elalvási időzítő <Perc/Másodperc>",//Sleep Timeout
+	"Kikapcsolási időzítő <Minutes>",//Shutdown Time
+	"Mozgás érzékenység beállítása. <0.Ki 1.kevésbé érzékeny 9.legérzékenyebb>",//Motion Sensitivity
+	"Hőmérsékleti egység <C=Celsius F=Fahrenheit>",//Temp Unit
+	"Részletes információ megjelenítése kisebb betűméretben a készenléti képernyőn.",//Detailed Information
+	"Megjelenítési tájolás <A. Automatikus L. Balkezes R. Jobbkezes>",//Orientation
+	"Elülső gombbal lépjen boost módba, 450C forrasztás közben",//Boost enable
+	"Hőmérséklet \"boost\" módban",//Boost Temp
+	"Bekapcsolás után automatikusan lépjen forrasztás módba. T=Forrasztás, S=Alvó mód,F=Ki",//Auto start
+	"Villogjon a hőmérséklet hűlés közben, amíg a hegy forró.",//Cooling Blink
+	"Hegy hőmérsékletének kalibrálása",//Calibrate Tip
+	"Beállítások alaphelyzetbe állítása",//Reset Settings
+	"A bemeneti feszültség kalibrálása. Röviden megnyomva állítsa be, hosszan nyomja meg a kilépéshez.",//VIN Cal
+	"Részletes információk megjelenítése forrasztás közben",//ADV SLD
+};
+
+const char* SettingsCalibrationWarning = "Folytatás előtt győződj meg róla, hogy a hegy szobahőmérsékletű!";
+const char* UVLOWarningString = "LOW VOLT";    //Fixed width 8 chars
+const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
+const char* SleepingAdvancedString = "Alvás...";// <=17 chars
+const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
+const char* WarningAdvancedString = "FIGYELEM! FORRÓ HEGY!";
+
+const char SettingTrueChar = 'T';
+const char SettingFalseChar = 'F';
+const char SettingRightChar = 'R';
+const char SettingLeftChar = 'L';
+const char SettingAutoChar = 'A';
+
+const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
+const char* SettingsShortNames[16][2] = {
+	/* (<= 5) Power source (DC or batt)          */{"PWRSC"},
+	/* (<= 4) Sleep temperature                  */{"STMP"},
+	/* (<= 4) Sleep timeout                      */{"STME"},
+	/* (<= 5) Shutdown timeout                   */{"SHTME"},
+	/* (<= 6) Motion sensitivity level           */{"MSENSE"},
+	/* (<= 6) Temperature in F and C             */{"TMPUNT"},
+	/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
+	/* (<= 6) Display rotation mode              */{"DSPROT"},
+	/* (<= 6) Boost enabled                      */{"BOOST"},
+	/* (<= 4) Boost temperature                  */{"BTMP"},
+	/* (<= 6) Automatic start mode               */{"ASTART"},
+	/* (<= 6) Cooldown blink                     */{"CLBLNK"},
+	/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
+	/* (<= 8) Settings reset command             */{"RESET?"},
+	/* (<= 8) Calibrate input voltage            */{"CAL VIN?"},
+	/* (<= 6) Advanced soldering screen enabled  */{"ADVSLD"},
+};
+#endif
+
+#ifdef LANG_TR
+const char* SettingsLongNames[16] = {
+	/*These are all the help text for all the settings.*/
+	/*No requirements on spacing or length*/
+	/* Power source (DC or batt)          */"Güç Kaynağı. kesim geriliminı ayarlar. <DC 10V> <S 3.3V hücre başına>", //Power Source
+	/* Sleep temperature                  */"Uyku Sıcaklığı <C>",//Sleep Temp
+	/* Sleep timeout                      */"Uyku Zaman Aşımı <Dakika/Saniye>",//Sleep Timeout
+	/* Shutdown timeout                   */"Kapatma Zaman Aşımı <Dakika>",//Shutdown Time
+	/* Motion sensitivity level           */"Hareket Hassasiyeti <0.Kapalı 1.En az duyarlı 9.En duyarlı>",//Motion Sensitivity
+	/* Temperature in F and C             */"Sıcaklık Ünitesi <C=Celsius F=Fahrenheit>",//Temp Unit
+	/* Advanced idle display mode enabled */"Boş ekranda ayrıntılı bilgileri daha küçük bir yazı tipi ile göster.",//Detailed Information
+	/* Display rotation mode              */"Görüntü Yönlendirme <A. Otomatik L. Solak R. Sağlak>",//Orientation
+	/* Boost enabled                      */"Lehimleme yaparken ön tuşa basmak Boost moduna sokar(450C)",//Boost enable
+	/* Boost temperature                  */"\"boost\" Modu Derecesi",//Boost Temp
+	/* Automatic start mode               */"Güç verildiğinde otomatik olarak lehimleme modunda başlat. T=Lehimleme Modu, S= Uyku Modu,F=Kapalı",//Auto start
+	/* Cooldown blink                     */"Soğutma ekranında uç hala sıcakken derece yanıp sönsün.",//Cooling Blink
+	/* Temperature calibration enter menu */"Ucu kalibre et.",//Calibrate Tip
+	/* Settings reset command             */"Bütün ayarları sıfırla",//Reset Settings
+	/* Calibrate input voltage            */"VIN Kalibrasyonu. Düğmeler ayarlar, çıkmak için uzun bas.",//VIN Cal
+	/* Advanced soldering screen enabled  */"Lehimleme yaparken detaylı bilgi göster",//ADV SLD
+};
+
+const char* SettingsCalibrationWarning = "Lütfen devam etmeden önce ucun oda sıcaklığında olduğunu garantiye alın!";
+const char* UVLOWarningString = "LOW VOLT";    //Fixed width 8 chars
+const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
+const char* SleepingAdvancedString = "Uyuyor...";// <=17 chars
+const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
+const char* WarningAdvancedString = "UYARI! UÇ SICAK!";
+
+const char SettingTrueChar = 'T';
+const char SettingFalseChar = 'F';
+const char SettingRightChar = 'R';
+const char SettingLeftChar = 'L';
+const char SettingAutoChar = 'A';
+
+const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
+const char* SettingsShortNames[16][2] = {
+	/* (<= 5) Power source (DC or batt)          */{"PWRSC"},
+	/* (<= 4) Sleep temperature                  */{"STMP"},
+	/* (<= 4) Sleep timeout                      */{"STME"},
+	/* (<= 5) Shutdown timeout                   */{"SHTME"},
+	/* (<= 6) Motion sensitivity level           */{"MSENSE"},
+	/* (<= 6) Temperature in F and C             */{"TMPUNT"},
+	/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
+	/* (<= 6) Display rotation mode              */{"DSPROT"},
+	/* (<= 6) Boost enabled                      */{"BOOST"},
+	/* (<= 4) Boost temperature                  */{"BTMP"},
+	/* (<= 6) Automatic start mode               */{"ASTART"},
+	/* (<= 6) Cooldown blink                     */{"CLBLNK"},
+	/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
+	/* (<= 8) Settings reset command             */{"RESET?"},
+	/* (<= 8) Calibrate input voltage            */{"CAL VIN?"},
+	/* (<= 6) Advanced soldering screen enabled  */{"ADVSLD"},
+};
+#endif
+
+#ifdef LANG_DK
+const char* SettingsLongNames[16] =
+{
+	/*These are all the help text for all the settings.*/
+	/*No requirements on spacing or length*/
+	"Strømforsyning. Indstil Cutoff Spændingen. <DC 10V <S 3.3V per cell", //Power Source
+	"Dvale Temperatur <C",//Sleep Temp
+	"Dvale Timeout <Minutter/Sekunder",//Sleep Timeout
+	"sluknings Timeout <Minutter",//Shutdown Time
+	"Bevægelsesfølsomhed <0.Slukket 1.Mindst følsom 9.Mest følsom",//Motion Sensitivity
+	"Temperatur Enhed <C=Celsius F=Fahrenheit",//Temp Unit
+	"Vis detialieret information med en mindre skriftstørrelse på standby skærmen.",//Detailed Information
+	"Skærm Orientering <A. Automatisk V. Venstre Håndet H. Højre Håndet",//Orientation
+	"Ved tryk på front knap Aktiveres boost-funktionen, 450C tilstand når der loddes",//Boost enable
+	"Temperatur i \"boost\" mode",//Boost Temp
+	"Start automatisk med lodning når strøm sættes til. L=Lodning, D= Dvale tilstand,S=Slukket",//Auto start
+	"Blink temperaturen på skærmen, mens spidsen stadig er varm.",//Cooling Blink
+	"kalibrere spids temperatur.",//Calibrate Tip
+	"Gendan alle indstillinger",//Reset Settings
+	"VIN kalibrering. Knapperne justere, Lang tryk for at gå ud",//VIN Cal
+	"Vis detialieret information mens der loddes",//ADV SLD
+};
+
+const char* SettingsCalibrationWarning =
+"Sørg for at loddespidsen er ved stuetemperatur, inden du fortsætter!";
+const char* UVLOWarningString = "Lav Volt";    //Fixed width 8 chars
+const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
+const char* SleepingAdvancedString = "Dvale...";// <=17 chars
+const char* WarningSimpleString = "Varm";//Must be <= 4 chars
+const char* WarningAdvancedString = "ADVARSEL! VARM LODDESPIDS!";
+
+const char SettingTrueChar = 'j';
+const char SettingFalseChar = 'N';
+const char SettingRightChar = 'H';
+const char SettingLeftChar = 'V';
+const char SettingAutoChar = 'A';
+
+const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
+const char* SettingsShortNames[16][2] = {
+	/* (<= 5) Power source (DC or batt)          */{"PWRSC"},
+	/* (<= 4) Sleep temperature                  */{"STMP"},
+	/* (<= 4) Sleep timeout                      */{"STME"},
+	/* (<= 5) Shutdown timeout                   */{"SHTME"},
+	/* (<= 6) Motion sensitivity level           */{"MSENSE"},
+	/* (<= 6) Temperature in F and C             */{"TMPUNT"},
+	/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
+	/* (<= 6) Display rotation mode              */{"DSPROT"},
+	/* (<= 6) Boost enabled                      */{"BOOST"},
+	/* (<= 4) Boost temperature                  */{"BTMP"},
+	/* (<= 6) Automatic start mode               */{"ASTART"},
+	/* (<= 6) Cooldown blink                     */{"CLBLNK"},
+	/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
+	/* (<= 8) Settings reset command             */{"RESET?"},
+	/* (<= 8) Calibrate input voltage            */{"CAL VIN?"},
+	/* (<= 6) Advanced soldering screen enabled  */{"ADVSLD"},
+};
+#endif
+#ifdef LANG_PL
+const char* SettingsLongNames[16] =
+{
+	/*These are all the help text for all the settings.*/
+	/*No requirements on spacing or length*/
+	"Źródło zasilania. Ustaw napięcie odcięcia. <DC 10V> <S 3.3V dla ogniw Li>", //Power Source
+	"Temperatura uśpienia <°C>",//Sleep Temp
+	"Czas uśpienia <Minuty/Sekundy>",//Sleep Timeout
+	"Czas wyłączenia <Minuty>",//Shutdown Time
+	"Czułość ruchu <0.Wyłączona 1.minimalna 9.maksymalna>",//Motion Sensitivity
+	"Jednostka temperatury <C=Celsius F=Fahrenheit>",//Temp Unit
+	"Wyświetla szczegółowe informacje za pomocą mniejszej czcionki na ekranie bezczynnośći <T = wł., N = wył.>",//Detailed Information
+	"Orientacja wyświetlacza <A. Automatyczna L. Leworęczna P. Praworęczna>",//Orientation
+	"Użyj przycisku przedniego w celu zwiększenia temperatury <T = wł., N = wył.>",//Boost enable
+	"Temperatura w trybie \"boost\" ",//Boost Temp
+	"Automatyczne uruchamianie trybu lutowania po włączeniu zasilania. T=Lutowanie, S= Tryb Uspienia ,N=Wyłącz",//Auto start
+	"Temperatura na ekranie miga, gdy grot jest jeszcze gorący. <T = wł., N = wył.>",//Cooling Blink
+	"Kalibracja temperatury grota lutownicy",//Calibrate Tip
+	"Zresetuj wszystkie ustawienia",//Reset Settings
+	"Kalibracja napięcia wejściowego. Krótkie naciśnięcie, aby ustawić, długie naciśnięcie, aby wyjść.",//VIN Cal
+	"Wyświetl szczegółowe informacje podczas lutowania <T = wł., N = wył.>",//ADV SLD
+};
+
+const char* SettingsCalibrationWarning =
+"Przed kontynuowaniem upewnij się, że końcówka osiągnela temperature pokojowa!";
+const char* UVLOWarningString = "LOW VOLT";    //Fixed width 8 chars
+const char* SleepingSimpleString = "Zzz!";// Must be <= 4 chars
+const char* SleepingAdvancedString = "Uspienie...";// <=17 chars
+const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
+const char* WarningAdvancedString = "UWAGA! GORĄCA KOŃCÓWKA!";
+
+const char SettingTrueChar = 'T';
+const char SettingFalseChar = 'N';
+const char SettingRightChar = 'P';
+const char SettingLeftChar = 'L';
+const char SettingAutoChar = 'A';
+
+const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
+const char* SettingsShortNames[16][2] = {
+	/* (<= 5) Power source (DC or batt)          */{"PWRSC"},
+	/* (<= 4) Sleep temperature                  */{"STMP"},
+	/* (<= 4) Sleep timeout                      */{"STME"},
+	/* (<= 5) Shutdown timeout                   */{"SHTME"},
+	/* (<= 6) Motion sensitivity level           */{"MSENSE"},
+	/* (<= 6) Temperature in F and C             */{"TMPUNT"},
+	/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
+	/* (<= 6) Display rotation mode              */{"DSPROT"},
+	/* (<= 6) Boost enabled                      */{"BOOST"},
+	/* (<= 4) Boost temperature                  */{"BTMP"},
+	/* (<= 6) Automatic start mode               */{"ASTART"},
+	/* (<= 6) Cooldown blink                     */{"CLBLNK"},
+	/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
+	/* (<= 8) Settings reset command             */{"RESET?"},
+	/* (<= 8) Calibrate input voltage            */{"CAL VIN?"},
+	/* (<= 6) Advanced soldering screen enabled  */{"ADVSLD"},};
+#endif

workspace/TS100/src/gui.cpp

@@ -64,95 +64,159 @@ const menuitem settingsMenu[] = { /*Struct used for all settings options in the
 { NULL, { NULL }, { NULL } }    //end of menu marker. DO NOT REMOVE
 };
 
+
+static void printShortDescriptionSingleLine(uint32_t shortDescIndex) {
+  lcd.setFont(0);
+  lcd.setCharCursor(0, 0);
+  lcd.print(SettingsShortNames[shortDescIndex][0]);
+}
+
+static void printShortDescriptionDoubleLine(uint32_t shortDescIndex) {
+  lcd.setFont(1);
+  lcd.setCharCursor(0, 0);
+  lcd.print(SettingsShortNames[shortDescIndex][0]);
+  lcd.setCharCursor(0, 1);
+  lcd.print(SettingsShortNames[shortDescIndex][1]);
+}
+
+/**
+ * Prints two small lines of short description
+ * and prepares cursor in big font after it.
+ * @param shortDescIndex Index to of short description.
+ * @param cursorCharPosition Custom cursor char position to set after printing description.
+ */
+static void printShortDescription(uint32_t shortDescIndex, uint16_t cursorCharPosition) {
+  //print short description (default single line, explicit double line)
+  if(SettingsShortNameType == SHORT_NAME_DOUBLE_LINE) {
+    printShortDescriptionDoubleLine(shortDescIndex);
+  }
+  else {
+    printShortDescriptionSingleLine(shortDescIndex);
+  }
+
+  //prepare cursor for value
+  lcd.setFont(0);
+  lcd.setCharCursor(cursorCharPosition, 0);
+}
+
+
 static void settings_setInputVRange(void) {
 	systemSettings.cutoutSetting = (systemSettings.cutoutSetting + 1) % 5;
 }
+
 static void settings_displayInputVRange(void) {
-	lcd.print(SettingsShortNames[0]);
-	if (systemSettings.cutoutSetting) {
-		lcd.drawChar('0' + 2 + systemSettings.cutoutSetting);
-		lcd.drawChar('S');
-	} else {
-		lcd.print("DC");
-	}
+  printShortDescription(0, 6);
+
+  if (systemSettings.cutoutSetting) {
+    lcd.drawChar('0' + 2 + systemSettings.cutoutSetting);
+    lcd.drawChar('S');
+  }
+  else {
+    lcd.print("DC");
+  }
 }
 
+
 static void settings_setSleepTemp(void) {
 	systemSettings.SleepTemp += 10;
 	if (systemSettings.SleepTemp > 300)
 		systemSettings.SleepTemp = 50;
 }
+
 static void settings_displaySleepTemp(void) {
-	lcd.print(SettingsShortNames[1]);
+  printShortDescription(1, 5);
 	lcd.printNumber(systemSettings.SleepTemp, 3);
 }
+
+
 static void settings_setSleepTime(void) {
-	++systemSettings.SleepTime;    //Go up 1 minute at a time
-	if (systemSettings.SleepTime >= 16)
-		systemSettings.SleepTime = 1;    //can't set time over 10 mins
-//Remember that ^ is the time of no movement
+	systemSettings.SleepTime++;             //Go up 1 minute at a time
+	if (systemSettings.SleepTime >= 16) {
+	  systemSettings.SleepTime = 1;         //can't set time over 10 mins
+	}
+	//Remember that ^ is the time of no movement
 }
+
 static void settings_displaySleepTime(void) {
-	lcd.print(SettingsShortNames[2]);
-	if (systemSettings.SleepTime < 6) {
+  printShortDescription(2, 5);
+
+  if (systemSettings.SleepTime < 6) {
 		lcd.printNumber(systemSettings.SleepTime * 10, 2);
 		lcd.drawChar('S');
-	} else {
+	}
+  else {
 		lcd.printNumber(systemSettings.SleepTime - 5, 2);
 		lcd.drawChar('M');
 	}
 }
+
+
 static void settings_setShutdownTime(void) {
-	++systemSettings.ShutdownTime;
-	if (systemSettings.ShutdownTime > 60)
-		systemSettings.ShutdownTime = 0;    //wrap to off
+	systemSettings.ShutdownTime++;
+	if (systemSettings.ShutdownTime > 60) {
+	  systemSettings.ShutdownTime = 0;    //wrap to off
+	}
 }
+
 static void settings_displayShutdownTime(void) {
-	lcd.print(SettingsShortNames[3]);
+  printShortDescription(3, 6);
 	lcd.printNumber(systemSettings.ShutdownTime, 2);
 }
 
+
 static void settings_setTempF(void) {
 	systemSettings.temperatureInF = !systemSettings.temperatureInF;
 }
-static void settings_displayTempF(void) {
-	lcd.print(SettingsShortNames[5]);
 
-	if (systemSettings.temperatureInF)
-		lcd.drawChar('F');
-	else
-		lcd.drawChar('C');
+static void settings_displayTempF(void) {
+  printShortDescription(5, 7);
+
+  lcd.drawChar(
+      (systemSettings.temperatureInF)
+      ? 'F'
+      : 'C'
+  );
 }
 
+
 static void settings_setSensitivity(void) {
 	systemSettings.sensitivity++;
 	systemSettings.sensitivity = systemSettings.sensitivity % 10;
 }
+
 static void settings_displaySensitivity(void) {
-	lcd.print(SettingsShortNames[4]);
+  printShortDescription(4, 7);
 	lcd.printNumber(systemSettings.sensitivity, 1);
 }
 
+
 static void settings_setAdvancedSolderingScreens(void) {
 	systemSettings.detailedSoldering = !systemSettings.detailedSoldering;
 }
+
 static void settings_displayAdvancedSolderingScreens(void) {
-	lcd.print(SettingsShortNames[15]);
-	if (systemSettings.detailedSoldering)
-		lcd.drawChar(SettingTrueChar);
-	else
-		lcd.drawChar(SettingFalseChar);
+  printShortDescription(15, 7);
+
+  lcd.drawChar(
+      (systemSettings.detailedSoldering)
+      ? SettingTrueChar
+      : SettingFalseChar
+  );
 }
 
+
 static void settings_setAdvancedIDLEScreens(void) {
 	systemSettings.detailedIDLE = !systemSettings.detailedIDLE;
 }
+
 static void settings_displayAdvancedIDLEScreens(void) {
-	lcd.print(SettingsShortNames[6]);
-	if (systemSettings.detailedIDLE)
-		lcd.drawChar(SettingTrueChar);
-	else
-		lcd.drawChar(SettingFalseChar);
+  printShortDescription(6, 7);
+
+  lcd.drawChar(
+      (systemSettings.detailedIDLE)
+      ? SettingTrueChar
+      : SettingFalseChar
+  );
 }
 
 
@@ -160,9 +224,11 @@ static void settings_setDisplayRotation(void) {
 	systemSettings.OrientationMode++;
 	systemSettings.OrientationMode = systemSettings.OrientationMode % 3;
 }
+
 static void settings_displayDisplayRotation(void) {
-	lcd.print(SettingsShortNames[7]);
-	switch (systemSettings.OrientationMode) {
+  printShortDescription(7, 7);
+
+  switch (systemSettings.OrientationMode) {
 		case 0:
 			lcd.drawChar(SettingRightChar);
 			break;
@@ -173,66 +239,87 @@ static void settings_displayDisplayRotation(void) {
 			lcd.drawChar(SettingAutoChar);
 			break;
 	}
-
 }
+
+
 static void settings_setBoostModeEnabled(void) {
 	systemSettings.boostModeEnabled = !systemSettings.boostModeEnabled;
 }
+
 static void settings_displayBoostModeEnabled(void) {
-	lcd.print(SettingsShortNames[8]);
-	if (systemSettings.boostModeEnabled)
-		lcd.drawChar(SettingTrueChar);
-	else
-		lcd.drawChar(SettingFalseChar);
+  printShortDescription(8, 7);
+
+  lcd.drawChar(
+      (systemSettings.boostModeEnabled)
+      ? SettingTrueChar
+      : SettingFalseChar
+  );
 }
+
+
 static void settings_setBoostTemp(void) {
-	systemSettings.BoostTemp += 10;    //Go up 10 at a time
+	systemSettings.BoostTemp += 10;         //Go up 10 at a time
 	if (systemSettings.temperatureInF) {
-		if (systemSettings.BoostTemp > 850)
-			systemSettings.BoostTemp = 480;    //loop back at 250
-	} else {
-		if (systemSettings.BoostTemp > 450)
-			systemSettings.BoostTemp = 250;    //loop back at 250
+		if (systemSettings.BoostTemp > 850) {
+		  systemSettings.BoostTemp = 480;     //loop back at 250
+		}
+	}
+	else {
+		if (systemSettings.BoostTemp > 450) {
+		  systemSettings.BoostTemp = 250;     //loop back at 250
+		}
 	}
 }
+
 static void settings_displayBoostTemp(void) {
-	lcd.print(SettingsShortNames[9]);
+  printShortDescription(9, 5);
 	lcd.printNumber(systemSettings.BoostTemp, 3);
 }
+
+
 static void settings_setAutomaticStartMode(void) {
 	systemSettings.autoStartMode++;
 	systemSettings.autoStartMode %= 2;
 }
+
 static void settings_displayAutomaticStartMode(void) {
-	lcd.print(SettingsShortNames[10]);
-	switch (systemSettings.autoStartMode) {
-		case 0:
-			lcd.drawChar(SettingFalseChar);
-			break;
-		case 1:
-			lcd.drawChar(SettingTrueChar);
-			break;
-	}
+  printShortDescription(10, 7);
+
+  lcd.drawChar(
+      (systemSettings.autoStartMode)
+      ? SettingTrueChar
+      : SettingFalseChar
+  );
 }
+
+
 static void settings_setCoolingBlinkEnabled(void) {
 	systemSettings.coolingTempBlink = !systemSettings.coolingTempBlink;
 }
+
 static void settings_displayCoolingBlinkEnabled(void) {
-	lcd.print(SettingsShortNames[11]);
-	if (systemSettings.coolingTempBlink)
-		lcd.drawChar(SettingTrueChar);
-	else
-		lcd.drawChar(SettingFalseChar);
+  printShortDescription(11, 7);
+
+  lcd.drawChar(
+      (systemSettings.coolingTempBlink)
+      ? SettingTrueChar
+      : SettingFalseChar
+  );
 }
+
+
 static void settings_setResetSettings(void) {
 	settingsResetRequest = !settingsResetRequest;
 }
+
 static void settings_displayResetSettings(void) {
-	lcd.print(SettingsShortNames[13]);
-	if (settingsResetRequest)
-		lcd.drawChar(SettingTrueChar);
-	else
-		lcd.drawChar(SettingFalseChar);
+  printShortDescription(13, 7);
+
+  lcd.drawChar(
+      (settingsResetRequest)
+      ? SettingTrueChar
+      : SettingFalseChar
+  );
 }
 
 static void settings_setCalibrate(void) {
@@ -240,16 +327,18 @@ static void settings_setCalibrate(void) {
 	//We split off here to confirm with the user
 	uint8_t maxOffset = strlen(SettingsCalibrationWarning) + 5;
 	uint32_t descriptionStart = HAL_GetTick();
+
 	lcd.setFont(0);
 	lcd.clearScreen();
 	lcd.setCursor(0, 0);
-	for (;;) {
 
+	for (;;) {
 		int16_t descriptionOffset = (((HAL_GetTick() - descriptionStart) / 150) % maxOffset);
+
 		lcd.setCursor(12 * (7 - descriptionOffset), 0);
 		lcd.print(SettingsCalibrationWarning);
-		ButtonState buttons = getButtonState();
 
+		ButtonState buttons = getButtonState();
 		switch (buttons) {
 			case BUTTON_F_SHORT: {
 				//User confirmed
@@ -258,12 +347,14 @@ static void settings_setCalibrate(void) {
 				lcd.setCursor(0, 0);
 				lcd.print(".....");
 				lcd.refresh();
-				setCalibrationOffset(0);				//turn off the current offset
+
+				setCalibrationOffset(0);				    //turn off the current offset
 				for (uint8_t i = 0; i < 20; i++) {
-					getTipRawTemp(1);				//cycle through the filter a fair bit to ensure were stable.
+					getTipRawTemp(1);				          //cycle through the filter a fair bit to ensure we're stable.
 					osDelay(20);
 				}
 				osDelay(100);
+
 				uint16_t rawTempC = tipMeasurementToC(getTipRawTemp(0));
 				//We now measure the current reported tip temperature
 				uint16_t handleTempC = getHandleTemperature() / 10;
@@ -274,30 +365,33 @@ static void settings_setCalibrate(void) {
 				osDelay(100);
 				return;
 			}
-				break;
+
 			case BUTTON_BOTH:
 			case BUTTON_B_SHORT:
 			case BUTTON_F_LONG:
 			case BUTTON_B_LONG:
 				return;
-				break;
+
 			case BUTTON_NONE:
 				break;
 		}
+
 		lcd.refresh();
 		osDelay(50);
 	}
+}
 
-}
 static void settings_displayCalibrate(void) {
-	lcd.print(SettingsShortNames[12]);
+  printShortDescription(12, 5);
 }
 
+
 static void settings_setCalibrateVIN(void) {
-//Jump to the voltage calibration subscreen
+  //Jump to the voltage calibration subscreen
 	lcd.setFont(0);
 	lcd.clearScreen();
 	lcd.setCursor(0, 0);
+
 	for (;;) {
 		lcd.setCursor(0, 0);
 		lcd.printNumber(getInputVoltageX10(systemSettings.voltageDiv) / 10, 2);
@@ -310,30 +404,34 @@ static void settings_setCalibrateVIN(void) {
 			case BUTTON_F_SHORT:
 				systemSettings.voltageDiv++;
 				break;
+
 			case BUTTON_B_SHORT:
 				systemSettings.voltageDiv--;
 				break;
+
 			case BUTTON_BOTH:
 			case BUTTON_F_LONG:
 			case BUTTON_B_LONG:
 				saveSettings();
 				return;
-				break;
+
 			case BUTTON_NONE:
 				break;
 		}
+
 		lcd.refresh();
 		osDelay(50);
-		if (systemSettings.voltageDiv < 90)
-			systemSettings.voltageDiv = 90;
-		else if (systemSettings.voltageDiv > 130)
-			systemSettings.voltageDiv = 130;
+
 		//Cap to sensible values
+		if (systemSettings.voltageDiv < 90) {
+		  systemSettings.voltageDiv = 90;
+		}
+		else if (systemSettings.voltageDiv > 130) {
+		  systemSettings.voltageDiv = 130;
+		}
 	}
 }
-static void settings_displayCalibrateVIN(void) {
-	lcd.clearScreen();
-	lcd.setCursor(0, 0);
-	lcd.print(SettingsShortNames[14]);
 
+static void settings_displayCalibrateVIN(void) {
+  printShortDescription(14, 5);
 }

workspace/TS100/src/hardware.c

@@ -58,7 +58,7 @@ uint16_t getTipInstantTemperature() {
 uint16_t getTipRawTemp(uint8_t instant) {
 #define  filterDepth1 1
 	/*Pre filter used before PID*/
-#define  filterDepth2 32
+#define  filterDepth2 64
 	/*Post filter used for UI display*/
 	static uint16_t filterLayer1[filterDepth1];
 	static uint16_t filterLayer2[filterDepth2];

workspace/TS100/src/main.cpp

@@ -41,7 +41,7 @@ int main(void) {
 	setTipPWM(0);
 	lcd.initialize();    //start up the LCD
 	lcd.setFont(0);    //default to bigger font
-	accel.initalize();    //this sets up the I2C registers and loads up the default settings
+	accel.initalize(); //this sets up the I2C registers and loads up the default settings
 	HAL_IWDG_Refresh(&hiwdg);
 	restoreSettings();    //load the settings from flash
 	setCalibrationOffset(systemSettings.CalibrationOffset);
@@ -63,8 +63,8 @@ int main(void) {
 	MOVTaskHandle = osThreadCreate(osThread(MOVTask), NULL);
 
 	/* Create the objects*/
-	rotationChangedSemaphore = xSemaphoreCreateBinary();    // Used to unlock rotation thread
-	accelDataAvailableSemaphore = xSemaphoreCreateBinary();    // Used to unlock the movement thread
+	rotationChangedSemaphore = xSemaphoreCreateBinary(); // Used to unlock rotation thread
+	accelDataAvailableSemaphore = xSemaphoreCreateBinary(); // Used to unlock the movement thread
 	/* Start scheduler */
 	osKernelStart();
 
@@ -73,7 +73,22 @@ int main(void) {
 	}
 }
 void GUIDelay() {
-	osDelay(50);//20Hz
+	osDelay(50);    //20Hz
+}
+void gui_drawTipTemp() {
+	//Draw tip temp handling unit conversion & tolerance near setpoint
+	uint16_t Temp = getTipRawTemp(0);
+
+	if (systemSettings.temperatureInF)
+		Temp = tipMeasurementToF(Temp);
+	else
+		Temp = tipMeasurementToC(Temp);
+	//[Disabled 24/11/2017] Round if nearby
+	//if (abs(Temp - systemSettings.SolderingTemp) < 3)
+	//	Temp = systemSettings.SolderingTemp;
+
+	lcd.printNumber(Temp, 3);    //Draw the tip temp out finally
+
 }
 ButtonState getButtonState() {
 	/*
@@ -88,8 +103,12 @@ ButtonState getButtonState() {
 	static uint32_t previousStateChange = 0;
 	const uint16_t timeout = 400;
 	uint8_t currentState;
-	currentState = (HAL_GPIO_ReadPin(KEY_A_GPIO_Port, KEY_A_Pin) == GPIO_PIN_RESET ? 1 : 0) << 0;
-	currentState |= (HAL_GPIO_ReadPin(KEY_B_GPIO_Port, KEY_B_Pin) == GPIO_PIN_RESET ? 1 : 0) << 1;
+	currentState = (
+			HAL_GPIO_ReadPin(KEY_A_GPIO_Port, KEY_A_Pin) == GPIO_PIN_RESET ?
+					1 : 0) << 0;
+	currentState |= (
+			HAL_GPIO_ReadPin(KEY_B_GPIO_Port, KEY_B_Pin) == GPIO_PIN_RESET ?
+					1 : 0) << 1;
 
 	if (currentState)
 		lastButtonTime = HAL_GetTick();
@@ -104,7 +123,7 @@ ButtonState getButtonState() {
 			else if (currentState == 0x02)
 				return BUTTON_B_LONG;
 			else
-				return BUTTON_NONE;    // Both being held case, we dont long hold this
+				return BUTTON_NONE; // Both being held case, we dont long hold this
 		} else
 			return BUTTON_NONE;
 	} else {
@@ -179,9 +198,11 @@ static bool checkVoltageForExit() {
 			lcd.print("Undervoltage");
 			lcd.setCursor(0, 8);
 			lcd.print("Input V: ");
-			lcd.printNumber(getInputVoltageX10(systemSettings.voltageDiv) / 10, 2);
+			lcd.printNumber(getInputVoltageX10(systemSettings.voltageDiv) / 10,
+					2);
 			lcd.drawChar('.');
-			lcd.printNumber(getInputVoltageX10(systemSettings.voltageDiv) % 10, 1);
+			lcd.printNumber(getInputVoltageX10(systemSettings.voltageDiv) % 10,
+					1);
 			lcd.print("V");
 
 		} else {
@@ -201,7 +222,8 @@ static void gui_drawBatteryIcon() {
 		//User is on a lithium battery
 		//we need to calculate which of the 10 levels they are on
 		uint8_t cellCount = systemSettings.cutoutSetting + 2;
-		uint16_t cellV = getInputVoltageX10(systemSettings.voltageDiv) / cellCount;
+		uint16_t cellV = getInputVoltageX10(systemSettings.voltageDiv)
+				/ cellCount;
 		//Should give us approx cell voltage X10
 		//Range is 42 -> 33 = 9 steps therefore we will use battery 1-10
 		if (cellV < 33)
@@ -225,33 +247,33 @@ static void gui_solderingTempAdjust() {
 		if (buttons)
 			lastChange = HAL_GetTick();
 		switch (buttons) {
-			case BUTTON_NONE:
-				//stay
-				break;
-			case BUTTON_BOTH:
-				//exit
-				return;
-				break;
-			case BUTTON_B_LONG:
+		case BUTTON_NONE:
+			//stay
+			break;
+		case BUTTON_BOTH:
+			//exit
+			return;
+			break;
+		case BUTTON_B_LONG:
 
-				break;
-			case BUTTON_F_LONG:
+			break;
+		case BUTTON_F_LONG:
 
-				break;
-			case BUTTON_F_SHORT:
-				if (lcd.getRotation()) {
-					systemSettings.SolderingTemp += 10;    //add 10
-				} else {
-					systemSettings.SolderingTemp -= 10;    //sub 10
-				}
-				break;
-			case BUTTON_B_SHORT:
-				if (!lcd.getRotation()) {
-					systemSettings.SolderingTemp += 10;    //add 10
-				} else {
-					systemSettings.SolderingTemp -= 10;    //sub 10
-				}
-				break;
+			break;
+		case BUTTON_F_SHORT:
+			if (lcd.getRotation()) {
+				systemSettings.SolderingTemp += 10;    //add 10
+			} else {
+				systemSettings.SolderingTemp -= 10;    //sub 10
+			}
+			break;
+		case BUTTON_B_SHORT:
+			if (!lcd.getRotation()) {
+				systemSettings.SolderingTemp += 10;    //add 10
+			} else {
+				systemSettings.SolderingTemp -= 10;    //sub 10
+			}
+			break;
 		}
 		// constrain between 50-450 C
 		if (systemSettings.temperatureInF) {
@@ -292,7 +314,8 @@ static void gui_settingsMenu() {
 	settingsResetRequest = false;
 	bool earlyExit = false;
 	uint32_t descriptionStart = 0;
-	while ((settingsMenu[currentScreen].description != NULL) && earlyExit == false) {
+	while ((settingsMenu[currentScreen].incrementHandler.func != NULL)
+			&& earlyExit == false) {
 		lcd.setFont(0);
 		lcd.clearScreen();
 		lcd.setCursor(0, 0);
@@ -303,56 +326,58 @@ static void gui_settingsMenu() {
 		} else {
 			//Draw description
 			//draw string starting from descriptionOffset
-			int16_t maxOffset = strlen(settingsMenu[currentScreen].description) + 5;
+			int16_t maxOffset = strlen(settingsMenu[currentScreen].description)
+					+ 5;
 			if (descriptionStart == 0)
 				descriptionStart = HAL_GetTick();
 
-			int16_t descriptionOffset = (((HAL_GetTick() - descriptionStart) / 150) % maxOffset);
+			int16_t descriptionOffset = (((HAL_GetTick() - descriptionStart)
+					/ 10) % (maxOffset * 12));
 			//^ Rolling offset based on time
-			lcd.setCursor(12 * (7 - descriptionOffset), 0);
+			lcd.setCursor(((7 * 12) - descriptionOffset), 0);
 			lcd.print(settingsMenu[currentScreen].description);
 		}
 
 		ButtonState buttons = getButtonState();
 
 		switch (buttons) {
-			case BUTTON_BOTH:
-				earlyExit = true;    //will make us exit next loop
+		case BUTTON_BOTH:
+			earlyExit = true;    //will make us exit next loop
+			descriptionStart = 0;
+			break;
+		case BUTTON_F_SHORT:
+			//increment
+			if (descriptionStart == 0)
+				settingsMenu[currentScreen].incrementHandler.func();
+			else
 				descriptionStart = 0;
-				break;
-			case BUTTON_F_SHORT:
-				//increment
-				if (descriptionStart == 0)
-					settingsMenu[currentScreen].incrementHandler.func();
-				else
-					descriptionStart = 0;
-				break;
-			case BUTTON_B_SHORT:
-				if (descriptionStart == 0)
-					currentScreen++;
-				else
-					descriptionStart = 0;
-				break;
-			case BUTTON_F_LONG:
-				if (HAL_GetTick() - autoRepeatTimer > 200) {
-					settingsMenu[currentScreen].incrementHandler.func();
-					autoRepeatTimer = HAL_GetTick();
-					descriptionStart = 0;
-				}
-				break;
-			case BUTTON_B_LONG:
-				if (HAL_GetTick() - autoRepeatTimer > 200) {
-					currentScreen++;
-					autoRepeatTimer = HAL_GetTick();
-					descriptionStart = 0;
-				}
-				break;
-			case BUTTON_NONE:
-				break;
+			break;
+		case BUTTON_B_SHORT:
+			if (descriptionStart == 0)
+				currentScreen++;
+			else
+				descriptionStart = 0;
+			break;
+		case BUTTON_F_LONG:
+			if (HAL_GetTick() - autoRepeatTimer > 200) {
+				settingsMenu[currentScreen].incrementHandler.func();
+				autoRepeatTimer = HAL_GetTick();
+				descriptionStart = 0;
+			}
+			break;
+		case BUTTON_B_LONG:
+			if (HAL_GetTick() - autoRepeatTimer > 200) {
+				currentScreen++;
+				autoRepeatTimer = HAL_GetTick();
+				descriptionStart = 0;
+			}
+			break;
+		case BUTTON_NONE:
+			break;
 		}
 
 		lcd.refresh();    //update the LCD
-		GUIDelay();
+		osDelay(20);
 		HAL_IWDG_Refresh(&hiwdg);
 
 	}
@@ -411,6 +436,12 @@ static int gui_showTipTempWarning() {
 		GUIDelay();
 	}
 }
+static uint16_t min(uint16_t a, uint16_t b) {
+	if (a > b)
+		return b;
+	else
+		return a;
+}
 static int gui_SolderingSleepingMode() {
 //Drop to sleep temperature and display until movement or button press
 
@@ -418,15 +449,20 @@ static int gui_SolderingSleepingMode() {
 		ButtonState buttons = getButtonState();
 		if (buttons)
 			return 0;
-		if ((HAL_GetTick() - lastMovementTime < 1000) || (HAL_GetTick() - lastButtonTime < 1000))
+		if ((HAL_GetTick() - lastMovementTime < 1000)
+				|| (HAL_GetTick() - lastButtonTime < 1000))
 			return 0;    //user moved or pressed a button, go back to soldering
 		if (checkVoltageForExit())
 			return 1;    //return non-zero on error
 
 		if (systemSettings.temperatureInF)
-			currentlyActiveTemperatureTarget = ftoTipMeasurement(systemSettings.SleepTemp);
+			currentlyActiveTemperatureTarget = ftoTipMeasurement(
+					min(systemSettings.SleepTemp,
+							systemSettings.SolderingTemp));
 		else
-			currentlyActiveTemperatureTarget = ctoTipMeasurement(systemSettings.SleepTemp);
+			currentlyActiveTemperatureTarget = ctoTipMeasurement(
+					min(systemSettings.SleepTemp,
+							systemSettings.SolderingTemp));
 		//draw the lcd
 		uint16_t tipTemp;
 		if (systemSettings.temperatureInF)
@@ -448,9 +484,11 @@ static int gui_SolderingSleepingMode() {
 				lcd.print("C");
 
 			lcd.print(" ");
-			lcd.printNumber(getInputVoltageX10(systemSettings.voltageDiv) / 10, 2);
+			lcd.printNumber(getInputVoltageX10(systemSettings.voltageDiv) / 10,
+					2);
 			lcd.drawChar('.');
-			lcd.printNumber(getInputVoltageX10(systemSettings.voltageDiv) % 10, 1);
+			lcd.printNumber(getInputVoltageX10(systemSettings.voltageDiv) % 10,
+					1);
 			lcd.drawChar('V');
 		} else {
 			lcd.setFont(0);
@@ -461,7 +499,7 @@ static int gui_SolderingSleepingMode() {
 			else
 				lcd.drawSymbol(1);
 		}
-		if (systemSettings.ShutdownTime)    //only allow shutdown exit if time > 0
+		if (systemSettings.ShutdownTime)  //only allow shutdown exit if time > 0
 			if (lastMovementTime)
 				if (((uint32_t) (HAL_GetTick() - lastMovementTime))
 						> (uint32_t) (systemSettings.ShutdownTime * 60 * 1000)) {
@@ -499,31 +537,31 @@ static void gui_solderingMode() {
 
 		ButtonState buttons = getButtonState();
 		switch (buttons) {
-			case BUTTON_NONE:
-				//stay
-				boostModeOn = false;
-				break;
-			case BUTTON_BOTH:
-				//exit
-				return;
-				break;
-			case BUTTON_B_LONG:
-				return;    //exit on back long hold
-				break;
-			case BUTTON_F_LONG:
-				//if boost mode is enabled turn it on
-				if (systemSettings.boostModeEnabled)
-					boostModeOn = true;
-				break;
-			case BUTTON_F_SHORT:
-			case BUTTON_B_SHORT: {
-				uint16_t oldTemp = systemSettings.SolderingTemp;
-				gui_solderingTempAdjust();    //goto adjust temp mode
-				if (oldTemp != systemSettings.SolderingTemp) {
-					saveSettings();    //only save on change
-				}
+		case BUTTON_NONE:
+			//stay
+			boostModeOn = false;
+			break;
+		case BUTTON_BOTH:
+			//exit
+			return;
+			break;
+		case BUTTON_B_LONG:
+			return;    //exit on back long hold
+			break;
+		case BUTTON_F_LONG:
+			//if boost mode is enabled turn it on
+			if (systemSettings.boostModeEnabled)
+				boostModeOn = true;
+			break;
+		case BUTTON_F_SHORT:
+		case BUTTON_B_SHORT: {
+			uint16_t oldTemp = systemSettings.SolderingTemp;
+			gui_solderingTempAdjust();    //goto adjust temp mode
+			if (oldTemp != systemSettings.SolderingTemp) {
+				saveSettings();    //only save on change
 			}
-				break;
+		}
+			break;
 		}
 		//else we update the screen information
 		lcd.setCursor(0, 0);
@@ -543,10 +581,10 @@ static void gui_solderingMode() {
 
 				lcd.drawChar(' ');    // Space out gap between battery <-> temp
 				if (systemSettings.temperatureInF) {
-					lcd.printNumber(tipMeasurementToF(tipTemp), 3);    //Draw current tip temp
+					gui_drawTipTemp();    //Draw current tip temp
 					lcd.drawSymbol(0);    //deg F
 				} else {
-					lcd.printNumber(tipMeasurementToC(tipTemp), 3);    //Draw current tip temp
+					gui_drawTipTemp();    //Draw current tip temp
 					lcd.drawSymbol(1);    //deg C
 				}
 
@@ -577,10 +615,10 @@ static void gui_solderingMode() {
 					lcd.drawChar(' ');
 
 				if (systemSettings.temperatureInF) {
-					lcd.printNumber(tipMeasurementToF(tipTemp), 3);    //Draw current tip temp
+					gui_drawTipTemp();    //Draw current tip temp
 					lcd.drawSymbol(0);    //deg F
 				} else {
-					lcd.printNumber(tipMeasurementToC(tipTemp), 3);    //Draw current tip temp
+					gui_drawTipTemp();    //Draw current tip temp
 					lcd.drawSymbol(1);    //deg C
 				}
 
@@ -593,15 +631,19 @@ static void gui_solderingMode() {
 		//Update the setpoints for the temperature
 		if (boostModeOn) {
 			if (systemSettings.temperatureInF)
-				currentlyActiveTemperatureTarget = ftoTipMeasurement(systemSettings.BoostTemp);
+				currentlyActiveTemperatureTarget = ftoTipMeasurement(
+						systemSettings.BoostTemp);
 			else
-				currentlyActiveTemperatureTarget = ctoTipMeasurement(systemSettings.BoostTemp);
+				currentlyActiveTemperatureTarget = ctoTipMeasurement(
+						systemSettings.BoostTemp);
 
 		} else {
 			if (systemSettings.temperatureInF)
-				currentlyActiveTemperatureTarget = ftoTipMeasurement(systemSettings.SolderingTemp);
+				currentlyActiveTemperatureTarget = ftoTipMeasurement(
+						systemSettings.SolderingTemp);
 			else
-				currentlyActiveTemperatureTarget = ctoTipMeasurement(systemSettings.SolderingTemp);
+				currentlyActiveTemperatureTarget = ctoTipMeasurement(
+						systemSettings.SolderingTemp);
 		}
 
 		//Undervoltage test
@@ -611,7 +653,8 @@ static void gui_solderingMode() {
 
 		lcd.refresh();
 		if (systemSettings.sensitivity)
-			if (HAL_GetTick() - lastMovementTime > sleepThres && HAL_GetTick() - lastButtonTime > sleepThres) {
+			if (HAL_GetTick() - lastMovementTime > sleepThres
+					&& HAL_GetTick() - lastButtonTime > sleepThres) {
 				if (gui_SolderingSleepingMode()) {
 					return;    //If the function returns non-0 then exit
 				}
@@ -646,74 +689,78 @@ void startGUITask(void const * argument) {
 
 	uint8_t animationStep = 0;
 	uint8_t tempWarningState = 0;
+
+	HAL_IWDG_Refresh(&hiwdg);
+	if (showBootLogoIfavailable())
+		waitForButtonPressOrTimeout(2000);
+	HAL_IWDG_Refresh(&hiwdg);
 	if (systemSettings.autoStartMode) {
 		//jump directly to the autostart mode
 		if (systemSettings.autoStartMode == 1)
 			gui_solderingMode();
 	}
-	HAL_IWDG_Refresh(&hiwdg);
-	if (showBootLogoIfavailable())
-		waitForButtonPressOrTimeout(1000);
-	HAL_IWDG_Refresh(&hiwdg);
 #if ACCELDEBUG
 
 	for (;;) {
 		HAL_IWDG_Refresh(&hiwdg);
 		osDelay(100);
 	}
+	//^ Kept here for a way to block this thread
 #endif
-//^ Kept here for a way to block this thread
+
 	for (;;) {
 		ButtonState buttons = getButtonState();
 		if (tempWarningState == 2)
 			buttons = BUTTON_F_SHORT;
 		switch (buttons) {
-			case BUTTON_NONE:
-				//Do nothing
-				break;
-			case BUTTON_BOTH:
-				//Not used yet
-				break;
+		case BUTTON_NONE:
+			//Do nothing
+			break;
+		case BUTTON_BOTH:
+			//Not used yet
+			break;
 
-			case BUTTON_B_LONG:
-				//Show the version information
-			{
-				lcd.clearScreen();			//Ensure the buffer starts clean
-				lcd.setCursor(0, 0);		//Position the cursor at the 0,0 (top left)
-				lcd.setFont(1);					//small font
-				lcd.print((char*) "V2.00a6");    //Print version number
-				lcd.setCursor(0, 8);    //second line
-				lcd.print(__DATE__);    //print the compile date
-				lcd.refresh();
-				waitForButtonPress();
-				lcd.setFont(0);					//reset font
+		case BUTTON_B_LONG:
+			//Show the version information
+		{
+			lcd.clearScreen();			//Ensure the buffer starts clean
+			lcd.setCursor(0, 0);	//Position the cursor at the 0,0 (top left)
+			lcd.setFont(1);					//small font
+			lcd.print((char*) "V2.01");    //Print version number
+			lcd.setCursor(0, 8);    //second line
+			lcd.print(__DATE__);    //print the compile date
+			lcd.refresh();
+			waitForButtonPress();
+			lcd.setFont(0);					//reset font
 
-			}
-				break;
-			case BUTTON_F_LONG:
-				gui_solderingTempAdjust();
-				saveSettings();
-				break;
-			case BUTTON_F_SHORT:
-				lcd.setFont(0);
-				lcd.displayOnOff(true);    //turn lcd on
-				gui_solderingMode();    //enter soldering mode
-				tempWarningState = 0;    //make sure warning can show
-				break;
-			case BUTTON_B_SHORT:
-				lcd.setFont(0);
-				lcd.displayOnOff(true);    //turn lcd on
-				gui_settingsMenu();    //enter the settings menu
-				saveSettings();
-				setCalibrationOffset(systemSettings.CalibrationOffset);    //ensure cal offset is applied
-				break;
+		}
+			break;
+		case BUTTON_F_LONG:
+			gui_solderingTempAdjust();
+			saveSettings();
+			break;
+		case BUTTON_F_SHORT:
+			lcd.setFont(0);
+			lcd.displayOnOff(true);    //turn lcd on
+			gui_solderingMode();    //enter soldering mode
+			tempWarningState = 0;    //make sure warning can show
+			break;
+		case BUTTON_B_SHORT:
+			lcd.setFont(0);
+			lcd.displayOnOff(true);    //turn lcd on
+			gui_settingsMenu();    //enter the settings menu
+			saveSettings();
+			setCalibrationOffset(systemSettings.CalibrationOffset); //ensure cal offset is applied
+			break;
 		}
 		currentlyActiveTemperatureTarget = 0;    //ensure tip is off
 
 		if (systemSettings.sensitivity) {
-			if ((HAL_GetTick() - lastMovementTime) > 60000 && (HAL_GetTick() - lastButtonTime) > 60000)
+			if ((HAL_GetTick() - lastMovementTime) > 60000
+					&& (HAL_GetTick() - lastButtonTime) > 60000)
 				lcd.displayOnOff(false);    // turn lcd off when no movement
-			else if (HAL_GetTick() - lastMovementTime < 1000 || HAL_GetTick() - lastButtonTime < 1000) /*Use short time for test, and prevent lots of I2C writes for no need*/
+			else if (HAL_GetTick() - lastMovementTime < 1000
+					|| HAL_GetTick() - lastButtonTime < 1000) /*Use short time for test, and prevent lots of I2C writes for no need*/
 				lcd.displayOnOff(true);    //turn lcd back on
 
 		}
@@ -750,9 +797,11 @@ void startGUITask(void const * argument) {
 			}
 			lcd.setCursor(0, 8);
 			lcd.print("Input V: ");
-			lcd.printNumber(getInputVoltageX10(systemSettings.voltageDiv) / 10, 2);
+			lcd.printNumber(getInputVoltageX10(systemSettings.voltageDiv) / 10,
+					2);
 			lcd.drawChar('.');
-			lcd.printNumber(getInputVoltageX10(systemSettings.voltageDiv) % 10, 1);
+			lcd.printNumber(getInputVoltageX10(systemSettings.voltageDiv) % 10,
+					1);
 			lcd.print("V");
 
 		} else {
@@ -762,7 +811,7 @@ void startGUITask(void const * argument) {
 				lcd.setCursor(0, 0);
 				gui_drawBatteryIcon();
 			} else {
-				lcd.drawArea(0, 0, 84, 16, idleScreenBGF);    //Needs to be flipped
+				lcd.drawArea(0, 0, 84, 16, idleScreenBGF); //Needs to be flipped
 				lcd.setCursor(84, 0);
 				gui_drawBatteryIcon();
 			}
@@ -791,9 +840,11 @@ void startPIDTask(void const * argument) {
 	int32_t kp, ki, kd, kb;
 	int32_t backoffOverflow = 0;
 	kp = 20;
-	ki = 40;
-	kd = 30;
+	ki = 50;
+	kd = 40;
 	kb = 0;
+	// REMEBER ^^^^ These constants are backwards
+	// They act as dividers, so to 'increase' a P term, you make the number smaller.
 	const int32_t itermMax = 40;
 	for (;;) {
 		uint16_t rawTemp = getTipRawTemp(1);    //get instantaneous reading
@@ -829,12 +880,18 @@ void startPIDTask(void const * argument) {
 				output = 0;
 			} else
 				backoffOverflow = 0;
-
+			if (currentlyActiveTemperatureTarget < rawTemp) {
+				output = 0;
+				integralCount = 0;
+				backoffOverflow = 0;
+				derivativeLastValue = 0;
+			}
 			setTipPWM(output);
 		} else {
-			setTipPWM(0);    //disable the output driver if the output is set to be off elsewhere
+			setTipPWM(0); //disable the output driver if the output is set to be off elsewhere
 			integralCount = 0;
 			backoffOverflow = 0;
+			derivativeLastValue = 0;
 		}
 		derivativeLastValue = rawTemp;			//store for next loop
 		HAL_IWDG_Refresh(&hiwdg);
@@ -860,8 +917,8 @@ void startMOVTask(void const * argument) {
 #endif
 
 	for (;;) {
-		int32_t threshold = 800 + (9 * 200);
-		threshold -= systemSettings.sensitivity * 200;    // 200 is the step size
+		int32_t threshold = 1200 + (9 * 200);
+		threshold -= systemSettings.sensitivity * 200;   // 200 is the step size
 		accel.getAxisReadings(&tx, &ty, &tz);
 
 		datax[currentPointer] = (int32_t) tx;
@@ -886,7 +943,7 @@ void startMOVTask(void const * argument) {
 		lcd.print(" ");
 		lcd.printNumber(abs(avgy - (int32_t) ty), 5);
 		if ((abs(avgx - tx) + abs(avgy - ty) + abs(avgz - tz)) > max)
-			max = (abs(avgx - tx) + abs(avgy - ty) + abs(avgz - tz));
+		max = (abs(avgx - tx) + abs(avgy - ty) + abs(avgz - tz));
 		lcd.setCursor(0, 8);
 		lcd.printNumber(max, 5);
 		lcd.print(" ");
@@ -894,7 +951,7 @@ void startMOVTask(void const * argument) {
 		lcd.printNumber((abs(avgx - tx) + abs(avgy - ty) + abs(avgz - tz)), 5);
 		lcd.refresh();
 		if (HAL_GPIO_ReadPin(KEY_A_GPIO_Port, KEY_A_Pin) == GPIO_PIN_RESET)
-			max = 0;
+		max = 0;
 #endif
 		//Only run the actual processing if the sensitivity is set (aka we are enabled)
 		if (systemSettings.sensitivity) {
@@ -934,19 +991,20 @@ void startRotationTask(void const * argument) {
 	HAL_NVIC_EnableIRQ(EXTI9_5_IRQn);
 //^ We hold off enabling these until now to ensure the semaphore is available to be used first
 	switch (systemSettings.OrientationMode) {
-		case 0:
-			lcd.setRotation(false);
-			break;
-		case 1:
-			lcd.setRotation(true);
-			break;
-		case 2:
-			lcd.setRotation(false);
-			break;
+	case 0:
+		lcd.setRotation(false);
+		break;
+	case 1:
+		lcd.setRotation(true);
+		break;
+	case 2:
+		lcd.setRotation(false);
+		break;
 	}
 	for (;;) {
 		if ( xSemaphoreTake( rotationChangedSemaphore, portMAX_DELAY ) == pdTRUE
-				|| (HAL_GPIO_ReadPin(INT_Orientation_GPIO_Port, INT_Orientation_Pin) == GPIO_PIN_RESET)) {
+				|| (HAL_GPIO_ReadPin(INT_Orientation_GPIO_Port,
+				INT_Orientation_Pin) == GPIO_PIN_RESET)) {
 			// a rotation event has occured
 			bool rotation = accel.getOrientation();
 			if (systemSettings.OrientationMode == 2)
@@ -961,7 +1019,8 @@ void startRotationTask(void const * argument) {
 void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) {
 	static signed long xHigherPriorityTaskWoken;
 	if (GPIO_Pin == INT_Orientation_Pin) {
-		xSemaphoreGiveFromISR(rotationChangedSemaphore, &xHigherPriorityTaskWoken);
+		xSemaphoreGiveFromISR(rotationChangedSemaphore,
+				&xHigherPriorityTaskWoken);
 	} else if (GPIO_Pin == INT_Movement_Pin) {
 		//New data is available for reading from the unit
 		//xSemaphoreGiveFromISR(accelDataAvailableSemaphore, &xHigherPriorityTaskWoken);

workspace/ts100/.cproject

@@ -124,8 +124,8 @@
 				<configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="rm -rf" description="" id="fr.ac6.managedbuild.config.gnu.cross.exe.release.723264573" name="Release" parent="fr.ac6.managedbuild.config.gnu.cross.exe.release" postannouncebuildStep="Generating binary and Printing size information:" postbuildStep="arm-none-eabi-objcopy -O binary &quot;${BuildArtifactFileBaseName}.elf&quot; &quot;${BuildArtifactFileBaseName}.bin&quot;; arm-none-eabi-size -B &quot;${BuildArtifactFileName}&quot; ;arm-none-eabi-objcopy -O ihex &quot;${BuildArtifactFileBaseName}.elf&quot; &quot;${BuildArtifactFileBaseName}.hex&quot;">
 					<folderInfo id="fr.ac6.managedbuild.config.gnu.cross.exe.release.723264573." name="/" resourcePath="">
 						<toolChain id="fr.ac6.managedbuild.toolchain.gnu.cross.exe.release.1456567544" name="Ac6 STM32 MCU GCC" superClass="fr.ac6.managedbuild.toolchain.gnu.cross.exe.release">
-							<option id="fr.ac6.managedbuild.option.gnu.cross.mcu.67332574" name="Mcu" superClass="fr.ac6.managedbuild.option.gnu.cross.mcu" value="STM32F103T8Ux" valueType="string"/>
-							<option id="fr.ac6.managedbuild.option.gnu.cross.board.1570943989" name="Board" superClass="fr.ac6.managedbuild.option.gnu.cross.board" value="ts100" valueType="string"/>
+							<option id="fr.ac6.managedbuild.option.gnu.cross.mcu.67332574" name="Mcu" superClass="fr.ac6.managedbuild.option.gnu.cross.mcu" useByScannerDiscovery="false" value="STM32F103T8Ux" valueType="string"/>
+							<option id="fr.ac6.managedbuild.option.gnu.cross.board.1570943989" name="Board" superClass="fr.ac6.managedbuild.option.gnu.cross.board" useByScannerDiscovery="false" value="ts100" valueType="string"/>
 							<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="fr.ac6.managedbuild.targetPlatform.gnu.cross.793444160" isAbstract="false" osList="all" superClass="fr.ac6.managedbuild.targetPlatform.gnu.cross"/>
 							<builder buildPath="${workspace_loc:/TS100}/Release" id="fr.ac6.managedbuild.builder.gnu.cross.548236022" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="fr.ac6.managedbuild.builder.gnu.cross"/>
 							<tool id="fr.ac6.managedbuild.tool.gnu.cross.c.compiler.1363306495" name="MCU GCC Compiler" superClass="fr.ac6.managedbuild.tool.gnu.cross.c.compiler">
@@ -188,7 +188,7 @@
 							</tool>
 							<tool id="fr.ac6.managedbuild.tool.gnu.archiver.907512577" name="MCU GCC Archiver" superClass="fr.ac6.managedbuild.tool.gnu.archiver"/>
 							<tool id="fr.ac6.managedbuild.tool.gnu.cross.assembler.1906472572" name="MCU GCC Assembler" superClass="fr.ac6.managedbuild.tool.gnu.cross.assembler">
-								<option id="gnu.both.asm.option.include.paths.1277819409" name="Include paths (-I)" superClass="gnu.both.asm.option.include.paths" valueType="includePath">
+								<option id="gnu.both.asm.option.include.paths.1277819409" name="Include paths (-I)" superClass="gnu.both.asm.option.include.paths" useByScannerDiscovery="false" valueType="includePath">
 									<listOptionValue builtIn="false" value="&quot;${ProjDirPath}/inc&quot;"/>
 									<listOptionValue builtIn="false" value="&quot;${ProjDirPath}/CMSIS/core&quot;"/>
 									<listOptionValue builtIn="false" value="&quot;${ProjDirPath}/CMSIS/device&quot;"/>

workspace/ts100/inc/Font.h

@@ -9,6 +9,7 @@
 
 #ifndef FONT_H_
 #define FONT_H_
+#include "Translation.h"
 /*
  * Remember screen is LSB at the top, MSB at the bottom of the strip!
  */
@@ -110,116 +111,118 @@ const uint8_t FONT_12[]={
 		0x00,0x00,0x60,0xE0,0x80,0x00,0x00,0x80,0xE0,0x60,0x00,0x00,0x00,0x00,0x00,0x81,0xE7,0x7E,0x1E,0x07,0x01,0x00,0x00,0x00,//y
 		0x00,0x60,0x60,0x60,0x60,0x60,0xE0,0xE0,0x60,0x20,0x00,0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x31,0x30,0x30,0x30,0x00,0x00,//z
 		0x00,0x00,0x80,0xC0,0xFC,0x7E,0x07,0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x1F,0x3F,0x70,0x60,0x60,0x60,0x00,0x00,//{
-		0x00,0x00,0x00,0x00,0x00,0xBF,0xBF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,//|
+		0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,//|
 		0x00,0x00,0x03,0x03,0x03,0x07,0x7E,0xFC,0xC0,0x80,0x00,0x00,0x00,0x00,0x60,0x60,0x60,0x70,0x3F,0x1F,0x01,0x00,0x00,0x00,//}
 		0x00,0x10,0x18,0x0C,0x04,0x0C,0x18,0x10,0x18,0x0C,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~
 		0x00,0x00,0x80,0xC0,0x60,0x30,0x30,0x60,0xC0,0x80,0x00,0x00,0x00,0x0F,0x0F,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0F,0x0F,0x00,//Up triangle
 
 		/*Start extended Latin range*/
-		//V96
-		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//A0 (blank)
-		0x00,0x00,0x00,0x00,0x80,0xF3,0xF3,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x3F,0x3F,0x0F,0x00,0x00,0x00,0x00,//A1//161
-		0x00,0x00,0xE0,0xF0,0x38,0xFE,0xFE,0x18,0x38,0x30,0x00,0x00,0x00,0x00,0x03,0x07,0x0E,0x3F,0x3F,0x0C,0x0E,0x06,0x00,0x00,//A2//162
-		0x00,0x00,0x00,0x80,0xF8,0xFC,0x8C,0x8C,0x1C,0x18,0x00,0x00,0x00,0x00,0x18,0x1C,0x1F,0x0B,0x18,0x18,0x18,0x18,0x08,0x00,//A3//163
-		0x00,0xF6,0xFE,0x18,0x0C,0x0C,0x0C,0x0C,0x18,0xFE,0xF6,0x00,0x00,0x1B,0x1F,0x06,0x0C,0x0C,0x0C,0x0C,0x06,0x1F,0x1B,0x00,//A4//164
-		0x00,0x03,0x0F,0x3C,0xF0,0xC0,0xC0,0xF0,0x3C,0x0F,0x03,0x00,0x00,0x00,0x0A,0x0A,0x0A,0x3F,0x3F,0x0A,0x0A,0x0A,0x00,0x00,//A5//165
-		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//A6 (blank)
-		0x00,0x00,0xDC,0xFE,0x22,0x22,0x22,0x22,0xE6,0xC4,0x00,0x00,0x00,0x00,0x08,0x19,0x11,0x11,0x11,0x11,0x1F,0x0E,0x00,0x00,//A7//167
-		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//A8 (blank)
-		0x00,0xF0,0xF8,0x1C,0xCC,0xEC,0x2C,0x6C,0x4C,0x1C,0xF8,0xF0,0x00,0x07,0x0F,0x1C,0x19,0x1B,0x1A,0x1B,0x19,0x1C,0x0F,0x07,//A9//169
-		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//AA (blank)
-		0x00,0x80,0xC0,0x60,0x20,0x00,0x80,0xC0,0x60,0x20,0x00,0x00,0x00,0x00,0x01,0x03,0x02,0x00,0x00,0x01,0x03,0x02,0x00,0x00,//AB//171
-		0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xF8,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x00,//AC//172
-		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//AD (blank)
-		0x00,0xF0,0xF8,0x1C,0xEC,0xEC,0xAC,0xEC,0x4C,0x1C,0xF8,0xF0,0x00,0x07,0x0F,0x1C,0x1B,0x1B,0x18,0x1B,0x1B,0x1C,0x0F,0x07,//AE//174
-		0x00,0x00,0x00,0x00,0x00,0x0C,0x0C,0x0C,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//AF//175
+		//V96 ---- HALF-PAGE U+00A0-U+00BF (UTF 0xC2A0-0xC2BF) ----
+		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, //    c2 a0
+		0x00,0x00,0x00,0x00,0x80,0xF3,0xF3,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x3F,0x3F,0x0F,0x00,0x00,0x00,0x00, // ¡  c2 a1
+		0x00,0x00,0xE0,0xF0,0x38,0xFE,0xFE,0x18,0x38,0x30,0x00,0x00,0x00,0x00,0x03,0x07,0x0E,0x3F,0x3F,0x0C,0x0E,0x06,0x00,0x00, // ¢  c2 a2
+		0x00,0x00,0x00,0x80,0xF8,0xFC,0x8C,0x8C,0x1C,0x18,0x00,0x00,0x00,0x00,0x18,0x1C,0x1F,0x0B,0x18,0x18,0x18,0x18,0x08,0x00, // £  c2 a3
+		0x00,0xF6,0xFE,0x18,0x0C,0x0C,0x0C,0x0C,0x18,0xFE,0xF6,0x00,0x00,0x1B,0x1F,0x06,0x0C,0x0C,0x0C,0x0C,0x06,0x1F,0x1B,0x00, // ¤  c2 a4
+		0x00,0x03,0x0F,0x3C,0xF0,0xC0,0xC0,0xF0,0x3C,0x0F,0x03,0x00,0x00,0x00,0x0A,0x0A,0x0A,0x3F,0x3F,0x0A,0x0A,0x0A,0x00,0x00, // ¥  c2 a5
+		0x00,0x00,0x00,0x00,0x00,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00, // ¦  c2 a6
+		0x00,0x00,0xDC,0xFE,0x22,0x22,0x22,0x22,0xE6,0xC4,0x00,0x00,0x00,0x00,0x08,0x19,0x11,0x11,0x11,0x11,0x1F,0x0E,0x00,0x00, // §  c2 a7
+		0x00,0x00,0x00,0x03,0x03,0x00,0x00,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ¨  c2 a8
+		0x00,0xF0,0xF8,0x1C,0xCC,0xEC,0x2C,0x6C,0x4C,0x1C,0xF8,0xF0,0x00,0x07,0x0F,0x1C,0x19,0x1B,0x1A,0x1B,0x19,0x1C,0x0F,0x07, // ©  c2 a9
+		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, //    c2 aa
+		0x00,0x80,0xC0,0x60,0x20,0x00,0x80,0xC0,0x60,0x20,0x00,0x00,0x00,0x00,0x01,0x03,0x02,0x00,0x00,0x01,0x03,0x02,0x00,0x00, // «  c2 ab
+		0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xF8,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x00, // ¬  c2 ac
+		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, //    c2 ad
+		0x00,0xF0,0xF8,0x1C,0xEC,0xEC,0xAC,0xEC,0x4C,0x1C,0xF8,0xF0,0x00,0x07,0x0F,0x1C,0x1B,0x1B,0x18,0x1B,0x1B,0x1C,0x0F,0x07, // ®  c2 ae
+		0x00,0x00,0x00,0x00,0x00,0x0C,0x0C,0x0C,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ¯  c2 af
 		//V112
-		0x00,0x00,0x00,0x1E,0x3F,0x33,0x33,0x3F,0x1E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//B0//176
-		0x00,0x00,0x00,0xC0,0xC0,0xF0,0xF0,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x1B,0x1B,0x18,0x18,0x00,0x00,0x00,//B1//177
-		0x00,0x00,0x19,0x1D,0x15,0x17,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//B2//178
-		0x00,0x00,0x11,0x15,0x15,0x1F,0x0A,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//B3//179
-		0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//B4//180
-		0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x00,0xFF,0xFF,0x0E,0x0C,0x0C,0x0C,0x06,0x0F,0x0F,0x00,0x00,//B5//181
-		0x00,0x38,0x7C,0xC6,0x82,0xFE,0xFE,0x02,0xFE,0xFE,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x3F,0x3F,0x00,0x00,//B6//182
-		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//B7 (blank)
-		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//B8 (blank)
-		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//B9 (blank)
-		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//BA (blank)
-		0x00,0x20,0x60,0xC0,0x80,0x00,0x20,0x60,0xC0,0x80,0x00,0x00,0x00,0x02,0x03,0x01,0x00,0x00,0x02,0x03,0x01,0x00,0x00,0x00,//BB//187
-		0x00,0x48,0x7C,0x7C,0x40,0x80,0xC0,0x60,0x30,0x10,0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x06,0x07,0x04,0x1F,0x1F,0x00,//BC//188
-		0x00,0x48,0x7C,0x7C,0x40,0x80,0xC0,0x60,0x30,0x10,0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x00,0x19,0x1D,0x17,0x12,0x00,//BD//189
-		0x00,0x44,0x54,0x7C,0x28,0x80,0xC0,0x60,0x30,0x10,0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x06,0x07,0x04,0x1F,0x1F,0x00,//BE//190
-		0x00,0x00,0x00,0x80,0xC0,0xFB,0x7B,0x00,0x00,0x00,0x00,0x00,0x00,0x0E,0x1F,0x3B,0x31,0x30,0x30,0x30,0x38,0x1E,0x0E,0x00,//BF//191
-		//V128
-		0x00,0x00,0x00,0x80,0xE1,0x7B,0x7E,0xE4,0x80,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00,//C0//192
-		0x00,0x00,0x00,0x80,0xE4,0x7E,0x7B,0xE1,0x80,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00,//C1//193
-		0x00,0x00,0x00,0x84,0xE6,0x7B,0x7B,0xE6,0x84,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00,//C2//194
-		0x00,0x00,0x00,0x82,0xE3,0x79,0x7B,0xE2,0x83,0x01,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00,//C3//195
-		0x00,0x00,0x00,0x83,0xE3,0x78,0x78,0xE3,0x83,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00,//C4//196
-		0x00,0x00,0x00,0x80,0xE2,0x75,0x75,0xE2,0x80,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00,//C5//197
-		0x00,0x00,0x80,0xF0,0x7C,0x1F,0xFF,0xFF,0xC3,0xC3,0x03,0x00,0x00,0x3C,0x3F,0x07,0x06,0x06,0x3F,0x3F,0x30,0x30,0x30,0x00,//C6//198
-		0x00,0xF0,0xFC,0x0E,0x07,0x03,0x03,0x03,0x07,0x1E,0x1C,0x00,0x00,0x01,0x07,0xCE,0xDC,0xF8,0xF8,0x18,0x1C,0x0E,0x06,0x00,//C7//199
-		0x00,0xF8,0xF8,0x99,0x9B,0x9E,0x9C,0x98,0x98,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00,//C8//200
-		0x00,0xF8,0xF8,0x98,0x98,0x9C,0x9E,0x9B,0x99,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00,//C9//201
-		0x00,0xF8,0xF8,0x9C,0x9E,0x9B,0x9B,0x9E,0x9C,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00,//CA//202
-		0x00,0xF8,0xF8,0x9B,0x9B,0x98,0x98,0x9B,0x9B,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00,//CB//203
-		0x00,0x00,0x00,0x19,0x1B,0xFE,0xFC,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,//CC//204
-		0x00,0x00,0x00,0x18,0x18,0xFC,0xFE,0x1B,0x19,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,//CD//205
-		0x00,0x00,0x00,0x1C,0x1E,0xFB,0xFB,0x1E,0x1C,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,//CE//206
-		0x00,0x00,0x00,0x1B,0x1B,0xF8,0xF8,0x1B,0x1B,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,//CF//207
+		0x00,0x00,0x00,0x1E,0x3F,0x33,0x33,0x3F,0x1E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // °  c2 b0
+		0x00,0x00,0x00,0xC0,0xC0,0xF0,0xF0,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x1B,0x1B,0x18,0x18,0x00,0x00,0x00, // ±  c2 b1
+		0x00,0x00,0x19,0x1D,0x15,0x17,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ²  c2 b2
+		0x00,0x00,0x11,0x15,0x15,0x1F,0x0A,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ³  c2 b3
+		0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ´  c2 b4
+		0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x00,0xFF,0xFF,0x0E,0x0C,0x0C,0x0C,0x06,0x0F,0x0F,0x00,0x00, // µ  c2 b5
+		0x00,0x38,0x7C,0xC6,0x82,0xFE,0xFE,0x02,0xFE,0xFE,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x3F,0x3F,0x00,0x00, // ¶  c2 b6
+		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, //    c2 b7
+		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, //    c2 b8
+		0x00,0x00,0x12,0x1F,0x1F,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ¹  c2 b9
+		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, //    c2 ba
+		0x00,0x20,0x60,0xC0,0x80,0x00,0x20,0x60,0xC0,0x80,0x00,0x00,0x00,0x02,0x03,0x01,0x00,0x00,0x02,0x03,0x01,0x00,0x00,0x00, // »  c2 bb
+		0x00,0x48,0x7C,0x7C,0x40,0x80,0xC0,0x60,0x30,0x10,0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x06,0x07,0x04,0x1F,0x1F,0x00, // ¼  c2 bc
+		0x00,0x48,0x7C,0x7C,0x40,0x80,0xC0,0x60,0x30,0x10,0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x00,0x19,0x1D,0x17,0x12,0x00, // ½  c2 bd
+		0x00,0x44,0x54,0x7C,0x28,0x80,0xC0,0x60,0x30,0x10,0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x06,0x07,0x04,0x1F,0x1F,0x00, // ¾  c2 be
+		0x00,0x00,0x00,0x80,0xC0,0xFB,0x7B,0x00,0x00,0x00,0x00,0x00,0x00,0x0E,0x1F,0x3B,0x31,0x30,0x30,0x30,0x38,0x1E,0x0E,0x00, // ¿  c2 bf
+
+		//V128 ---- PAGE U+00C0-U+00FF (UTF 0xC380-0xC3BF) ----
+		0x00,0x00,0x00,0x80,0xE1,0x7B,0x7E,0xE4,0x80,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00, // À  c3 80
+		0x00,0x00,0x00,0x80,0xE4,0x7E,0x7B,0xE1,0x80,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00, // Á  c3 81
+		0x00,0x00,0x00,0x84,0xE6,0x7B,0x7B,0xE6,0x84,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00, // Â  c3 82
+		0x00,0x00,0x00,0x82,0xE3,0x79,0x7B,0xE2,0x83,0x01,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00, // Ã  c3 83
+		0x00,0x00,0x00,0x83,0xE3,0x78,0x78,0xE3,0x83,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00, // Ä  c3 84
+		0x00,0x00,0x00,0x80,0xE2,0x75,0x75,0xE2,0x80,0x00,0x00,0x00,0x00,0x38,0x3E,0x0F,0x0D,0x0C,0x0C,0x0D,0x0F,0x3E,0x38,0x00, // Å  c3 85
+		0x00,0x00,0x80,0xF0,0x7C,0x1F,0xFF,0xFF,0xC3,0xC3,0x03,0x00,0x00,0x3C,0x3F,0x07,0x06,0x06,0x3F,0x3F,0x30,0x30,0x30,0x00, // Æ  c3 86
+		0x00,0xF0,0xFC,0x0E,0x07,0x03,0x03,0x03,0x07,0x1E,0x1C,0x00,0x00,0x01,0x07,0xCE,0xDC,0xF8,0xF8,0x18,0x1C,0x0E,0x06,0x00, // Ç  c3 87
+		0x00,0xF8,0xF8,0x99,0x9B,0x9E,0x9C,0x98,0x98,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00, // È  c3 88
+		0x00,0xF8,0xF8,0x98,0x98,0x9C,0x9E,0x9B,0x99,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00, // É  c3 89
+		0x00,0xF8,0xF8,0x9C,0x9E,0x9B,0x9B,0x9E,0x9C,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00, // Ê  c3 8a
+		0x00,0xF8,0xF8,0x9B,0x9B,0x98,0x98,0x9B,0x9B,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00, // Ë  c3 8b
+		0x00,0x00,0x00,0x19,0x1B,0xFE,0xFC,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00, // Ì  c3 8c
+		0x00,0x00,0x00,0x18,0x18,0xFC,0xFE,0x1B,0x19,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00, // Í  c3 8d
+		0x00,0x00,0x00,0x1C,0x1E,0xFB,0xFB,0x1E,0x1C,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00, // Î  c3 8e
+		0x00,0x00,0x00,0x1B,0x1B,0xF8,0xF8,0x1B,0x1B,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00, // Ï  c3 8f
 		//V144
-		0x00,0xC0,0xFF,0xFF,0xC3,0x03,0x03,0x07,0x0E,0xFC,0xF0,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00,//D0//208
-		0x00,0xF8,0xF8,0x72,0xE3,0xC1,0x83,0x02,0x03,0xF9,0xF8,0x00,0x00,0x3F,0x3F,0x00,0x00,0x01,0x03,0x07,0x0E,0x3F,0x3F,0x00,//D1//209
-		0x00,0xE0,0xF0,0x39,0x1B,0x1E,0x1C,0x18,0x38,0xF0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,//D2//210
-		0x00,0xE0,0xF0,0x38,0x18,0x1C,0x1E,0x1B,0x39,0xF0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,//D3//211
-		0x00,0xE0,0xF0,0x3C,0x1E,0x1B,0x1B,0x1E,0x3C,0xF0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,//D4//212
-		0x00,0xE0,0xF0,0x3A,0x1B,0x19,0x1B,0x1A,0x3B,0xF1,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,//D5//213
-		0x00,0xE0,0xF0,0x3B,0x1B,0x18,0x18,0x1B,0x3B,0xF0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,//D6//214
-		0x00,0x00,0x10,0x30,0x60,0xC0,0xC0,0x60,0x30,0x10,0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x01,0x03,0x06,0x04,0x00,0x00,//D7//215
-		0x00,0xF0,0xF8,0x1C,0x0C,0x8C,0xEC,0x7C,0x18,0xFC,0xF4,0x00,0x00,0x2F,0x3F,0x18,0x3E,0x37,0x31,0x30,0x38,0x1F,0x0F,0x00,//D8//216
-		0x00,0xF8,0xF8,0x01,0x03,0x06,0x04,0x00,0x00,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00,//D9//217
-		0x00,0xF8,0xF8,0x00,0x00,0x04,0x06,0x03,0x01,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00,//DA//218
-		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//DB (blank)
-		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//DC (blank)
-		0x00,0x08,0x18,0x30,0x60,0xC4,0xC6,0x63,0x31,0x18,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,//DD//221
-		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//DE (blank)
-		0x00,0x00,0xC0,0xE0,0x30,0x10,0x10,0x30,0xE0,0xC0,0x00,0x00,0x00,0x00,0xFF,0xFF,0x21,0x21,0x21,0x33,0x3F,0x1E,0x00,0x00,//DF//223
+		0x00,0xC0,0xFF,0xFF,0xC3,0x03,0x03,0x07,0x0E,0xFC,0xF0,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00, // Ð  c3 90
+		0x00,0xF8,0xF8,0x72,0xE3,0xC1,0x83,0x02,0x03,0xF9,0xF8,0x00,0x00,0x3F,0x3F,0x00,0x00,0x01,0x03,0x07,0x0E,0x3F,0x3F,0x00, // Ñ  c3 91
+		0x00,0xE0,0xF0,0x39,0x1B,0x1E,0x1C,0x18,0x38,0xF0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00, // Ò  c3 92
+		0x00,0xE0,0xF0,0x38,0x18,0x1C,0x1E,0x1B,0x39,0xF0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00, // Ó  c3 93
+		0x00,0xE0,0xF0,0x3C,0x1E,0x1B,0x1B,0x1E,0x3C,0xF0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00, // Ô  c3 94
+		0x00,0xE0,0xF0,0x3A,0x1B,0x19,0x1B,0x1A,0x3B,0xF1,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00, // Õ  c3 95
+		0x00,0xE0,0xF0,0x3B,0x1B,0x18,0x18,0x1B,0x3B,0xF0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00, // Ö  c3 96
+		0x00,0x00,0x10,0x30,0x60,0xC0,0xC0,0x60,0x30,0x10,0x00,0x00,0x00,0x00,0x04,0x06,0x03,0x01,0x01,0x03,0x06,0x04,0x00,0x00, // ×  c3 97
+		0x00,0xF0,0xF8,0x1C,0x0C,0x8C,0xEC,0x7C,0x18,0xFC,0xF4,0x00,0x00,0x2F,0x3F,0x18,0x3E,0x37,0x31,0x30,0x38,0x1F,0x0F,0x00, // ×  c3 98
+		0x00,0xF8,0xF8,0x01,0x03,0x06,0x04,0x00,0x00,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00, // Ù  c3 99
+		0x00,0xF8,0xF8,0x00,0x00,0x04,0x06,0x03,0x01,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00, // Ú  c3 9a
+		0x00,0xF8,0xF8,0x04,0x06,0x03,0x03,0x06,0x04,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00, // Û  c3 9b
+		0x00,0xF8,0xF8,0x03,0x03,0x00,0x00,0x03,0x03,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00, // Ü  c3 9c
+		0x00,0x08,0x18,0x30,0x60,0xC4,0xC6,0x63,0x31,0x18,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00, // Ý  c3 9d
+		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, //    c3 9e
+		0x00,0x00,0xC0,0xE0,0x30,0x10,0x10,0x30,0xE0,0xC0,0x00,0x00,0x00,0x00,0xFF,0xFF,0x21,0x21,0x21,0x33,0x3F,0x1E,0x00,0x00, // ß  c3 9f
 		//V160
-		0x00,0x00,0x40,0x60,0x62,0x66,0x6C,0x68,0x60,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00,//E0//224
-		0x00,0x00,0x40,0x60,0x68,0x6C,0x66,0x62,0x60,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00,//E1//225
-		0x00,0x00,0x40,0x68,0x6C,0x66,0x66,0x6C,0x68,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00,//E2//226
-		0x00,0x00,0x40,0x68,0x6C,0x64,0x6C,0x68,0x6C,0xE4,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00,//E3//227
-		0x00,0x00,0x40,0x6C,0x6C,0x60,0x60,0x6C,0x6C,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00,//E4//228
-		0x00,0x00,0x40,0x60,0x64,0x6A,0x6A,0x64,0x60,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00,//E5//229
-		0x00,0x80,0xC0,0x40,0x40,0xC0,0x80,0x40,0x40,0xC0,0x80,0x00,0x00,0x1C,0x3E,0x22,0x22,0x1F,0x3F,0x22,0x22,0x33,0x11,0x00,//E6//230
-		0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0xB8,0xB0,0xF0,0xF0,0x30,0x38,0x18,0x08,0x00,//E7//231
-		0x00,0x80,0xC0,0xE0,0x62,0x66,0x6C,0x68,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x33,0x33,0x33,0x33,0x33,0x33,0x13,0x03,0x00,//E8//232
-		0x00,0x80,0xC0,0xE0,0x60,0x68,0x6C,0x66,0x62,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x03,0x00,//E9//233
-		0x00,0x80,0xC0,0xE8,0x6C,0x66,0x66,0x6C,0x68,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x33,0x33,0x33,0x33,0x33,0x33,0x13,0x03,0x00,//EA//234
-		0x00,0x80,0xC0,0xEC,0x6C,0x60,0x60,0x6C,0x6C,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x33,0x33,0x33,0x33,0x33,0x33,0x13,0x03,0x00,//EB//235
-		0x00,0x00,0x00,0x00,0x62,0xE6,0xEC,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,//EC//236
-		0x00,0x00,0x00,0x00,0x68,0xEC,0xE6,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,//ED//237
-		0x00,0x00,0x00,0x08,0x6C,0xE6,0xE6,0x0C,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,//EE//238
-		0x00,0x00,0x00,0x0C,0x6C,0xE0,0xEC,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00,//EF//239
+		0x00,0x00,0x40,0x60,0x62,0x66,0x6C,0x68,0x60,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00, // à  c3 a0
+		0x00,0x00,0x40,0x60,0x68,0x6C,0x66,0x62,0x60,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00, // á  c3 a1
+		0x00,0x00,0x40,0x68,0x6C,0x66,0x66,0x6C,0x68,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00, // â  c3 a2
+		0x00,0x00,0x40,0x68,0x6C,0x64,0x6C,0x68,0x6C,0xE4,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00, // ã  c3 a3
+		0x00,0x00,0x40,0x6C,0x6C,0x60,0x60,0x6C,0x6C,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00, // ä  c3 a4
+		0x00,0x00,0x40,0x60,0x64,0x6A,0x6A,0x64,0x60,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00, // å  c3 a5
+		0x00,0x80,0xC0,0x40,0x40,0xC0,0x80,0x40,0x40,0xC0,0x80,0x00,0x00,0x1C,0x3E,0x22,0x22,0x1F,0x3F,0x22,0x22,0x33,0x11,0x00, // æ  c3 a6
+		0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0xB8,0xB0,0xF0,0xF0,0x30,0x38,0x18,0x08,0x00, // ç  c3 a7
+		0x00,0x80,0xC0,0xE0,0x62,0x66,0x6C,0x68,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x33,0x33,0x33,0x33,0x33,0x33,0x13,0x03,0x00, // è  c3 a8
+		0x00,0x80,0xC0,0xE0,0x60,0x68,0x6C,0x66,0x62,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x03,0x00, // é  c3 a9
+		0x00,0x80,0xC0,0xE8,0x6C,0x66,0x66,0x6C,0x68,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x33,0x33,0x33,0x33,0x33,0x33,0x13,0x03,0x00, // ê  c3 aa
+		0x00,0x80,0xC0,0xEC,0x6C,0x60,0x60,0x6C,0x6C,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x33,0x33,0x33,0x33,0x33,0x33,0x13,0x03,0x00, // ë  c3 ab
+		0x00,0x00,0x00,0x00,0x62,0xE6,0xEC,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00, // ì  c3 ac
+		0x00,0x00,0x00,0x00,0x68,0xEC,0xE6,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00, // í  c3 ad
+		0x00,0x00,0x00,0x08,0x6C,0xE6,0xE6,0x0C,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00, // î  c3 ae
+		0x00,0x00,0x00,0x0C,0x6C,0xE0,0xEC,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00, // ï  c3 af
 		//V176
-		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//F0 (blank)
-		0x00,0x00,0xE0,0xE8,0x6C,0x64,0x6C,0x68,0xEC,0xC4,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,//F1//241
-		0x00,0x80,0xC0,0xE0,0x62,0x66,0x6C,0x68,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,//F2//242
-		0x00,0x80,0xC0,0xE0,0x68,0x6C,0x66,0x62,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,//F3//243
-		0x00,0x80,0xC0,0xE8,0x6C,0x66,0x66,0x6C,0xE8,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,//F4//244
-		0x00,0x80,0xC8,0xEC,0x64,0x6C,0x68,0x6C,0xE4,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,//F5//245
-		0x00,0x80,0xC0,0xEC,0x6C,0x60,0x60,0x6C,0xEC,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00,//F6//246
-		0x00,0x00,0x80,0x80,0x80,0xB0,0xB0,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x0D,0x0D,0x01,0x01,0x01,0x00,0x00,//F7//247
-		0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0xE0,0xC0,0xE0,0xA0,0x00,0x00,0x2F,0x3F,0x18,0x3C,0x36,0x33,0x31,0x38,0x1F,0x0F,0x00,//F8//248
-		0x00,0xE0,0xE0,0x00,0x02,0x06,0x0C,0x08,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00,//F9//249
-		0x00,0xE0,0xE0,0x00,0x08,0x0C,0x06,0x02,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00,//FA//250
-		0x00,0xE0,0xE0,0x08,0x0C,0x06,0x06,0x0C,0x08,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00,//FB//251
-		0x00,0xE0,0xE0,0x0C,0x0C,0x00,0x00,0x0C,0x0C,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00,//FC//252
-		0x00,0x00,0x60,0xE0,0x80,0x10,0x18,0x8C,0xE4,0x60,0x00,0x00,0x00,0x00,0x00,0x81,0xE7,0x7E,0x1E,0x07,0x01,0x00,0x00,0x00,//FD//253
-		0x00,0x00,0x03,0xFF,0xFF,0x1B,0x18,0x18,0xF8,0xF0,0x00,0x00,0x00,0x00,0x30,0x3F,0x3F,0x36,0x06,0x06,0x07,0x03,0x00,0x00,//FE//254
-		0x00,0x00,0x60,0xEC,0x8C,0x00,0x00,0x8C,0xEC,0x60,0x00,0x00,0x00,0x00,0x00,0x81,0xE7,0x7E,0x1E,0x07,0x01,0x00,0x00,0x00,//FF//255
-		//V192
+		0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, //    c3 b0
+		0x00,0x00,0xE0,0xE8,0x6C,0x64,0x6C,0x68,0xEC,0xC4,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00, // ñ  c3 b1
+		0x00,0x80,0xC0,0xE0,0x62,0x66,0x6C,0x68,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00, // ò  c3 b2
+		0x00,0x80,0xC0,0xE0,0x68,0x6C,0x66,0x62,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00, // ó  c3 b3
+		0x00,0x80,0xC0,0xE8,0x6C,0x66,0x66,0x6C,0xE8,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00, // ô  c3 b4
+		0x00,0x80,0xC8,0xEC,0x64,0x6C,0x68,0x6C,0xE4,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00, // õ  c3 b5
+		0x00,0x80,0xC0,0xEC,0x6C,0x60,0x60,0x6C,0xEC,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00, // ö  c3 b6
+		0x00,0x00,0x80,0x80,0x80,0xB0,0xB0,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x0D,0x0D,0x01,0x01,0x01,0x00,0x00, // ÷  c3 b7
+		0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0xE0,0xC0,0xE0,0xA0,0x00,0x00,0x2F,0x3F,0x18,0x3C,0x36,0x33,0x31,0x38,0x1F,0x0F,0x00, // ø  c3 b8
+		0x00,0xE0,0xE0,0x00,0x02,0x06,0x0C,0x08,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00, // ù  c3 b9
+		0x00,0xE0,0xE0,0x00,0x08,0x0C,0x06,0x02,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00, // ú  c3 bA
+		0x00,0xE0,0xE0,0x08,0x0C,0x06,0x06,0x0C,0x08,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00, // û  c3 bB
+		0x00,0xE0,0xE0,0x0C,0x0C,0x00,0x00,0x0C,0x0C,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00, // ü  c3 bC
+		0x00,0x00,0x60,0xE0,0x80,0x10,0x18,0x8C,0xE4,0x60,0x00,0x00,0x00,0x00,0x00,0x81,0xE7,0x7E,0x1E,0x07,0x01,0x00,0x00,0x00, // ý  c3 bD
+		0x00,0x00,0x03,0xFF,0xFF,0x1B,0x18,0x18,0xF8,0xF0,0x00,0x00,0x00,0x00,0x30,0x3F,0x3F,0x36,0x06,0x06,0x07,0x03,0x00,0x00, // þ  c3 bE
+		0x00,0x00,0x60,0xEC,0x8C,0x00,0x00,0x8C,0xEC,0x60,0x00,0x00,0x00,0x00,0x00,0x81,0xE7,0x7E,0x1E,0x07,0x01,0x00,0x00,0x00, // ÿ  c3 bF
+#ifdef LANG_RU
 		/* Cyrillic Glyphs */
+		//V192 ---- PAGE U+0400-U+043F (UTF 0xD080-0xD0BF) ----
 		0x00,0xFC,0xFC,0x8D,0x8F,0x8E,0x8C,0x8C,0x8C,0x0C,0x0C,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00, // Ѐ  d0 80
 		0x00,0xFE,0xFE,0xC7,0xC7,0xC6,0xC6,0xC7,0xC7,0x06,0x06,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00, // Ё  d0 81
 		0x00,0x03,0xFF,0xFF,0x83,0xC3,0xC3,0xC3,0xC0,0x80,0x00,0x00,0x00,0x00,0x3F,0x3F,0x01,0x00,0x30,0x30,0x39,0x1F,0x0F,0x00, // Ђ  d0 82
@@ -287,7 +290,8 @@ const uint8_t FONT_12[]={
 		0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x03,0x03,0x03,0x03,0x03,0x03,0x3F,0x3F,0x00, // н  d0 bd
 		0x00,0xC0,0xE0,0x70,0x30,0x30,0x30,0x30,0x70,0xE0,0xC0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00, // о  d0 be
 		0x00,0xF0,0xF0,0x30,0x30,0x30,0x30,0x30,0x30,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00, // п  d0 bf
-		//V256
+
+		//V256 ---- HALF-PAGE U+0440-U+045F (UTF 0xD180-0xD1BF) ----
 		0x00,0xF0,0xF0,0x30,0x30,0x30,0x30,0x30,0x70,0xE0,0xC0,0x00,0x00,0xFF,0xFF,0x0C,0x0C,0x0C,0x0C,0x0C,0x0E,0x07,0x03,0x00, // р  d1 80
 		0x00,0xC0,0xE0,0x70,0x30,0x30,0x30,0x30,0x70,0x60,0x40,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x18,0x08,0x00, // с  d1 81
 		0x00,0x30,0x30,0x30,0x30,0xF0,0xF0,0x30,0x30,0x30,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00, // т  d1 82
@@ -321,6 +325,146 @@ const uint8_t FONT_12[]={
 		0x00,0xF0,0xF0,0x00,0x06,0x0C,0x88,0xC0,0xE0,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x1C,0x0E,0x07,0x03,0x01,0x00,0x3F,0x3F,0x00, // ѝ  d1 9d
 		0x00,0x30,0xF0,0xC0,0x04,0x08,0x08,0x04,0xC0,0xF0,0x30,0x00,0x00,0x60,0xE0,0xC3,0xE7,0x7C,0x3C,0x0F,0x03,0x00,0x00,0x00, // ў  d1 9e
 		0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x3F,0x3F,0x30,0x30,0xF0,0xF0,0x30,0x30,0x3F,0x3F,0x00, // џ  d1 9f
+#else
+		/* U+0100 to ... Latin Extended-A */
+		//V192 ---- PAGE U+0100-U+013F (UTF 0xC480-0xC4BF) ----
+		0x00,0x00,0x00,0xE0,0xF9,0x1D,0x1D,0xF9,0xE0,0x00,0x00,0x00,0x00,0x38,0x3F,0x07,0x06,0x06,0x06,0x06,0x07,0x3F,0x38,0x00, // Ā  c4 80
+		0x00,0x00,0x40,0x60,0x68,0x68,0x68,0x68,0x68,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00, // ā  c4 81
+		0x00,0x00,0x00,0xE0,0xF9,0x1A,0x1A,0xF9,0xE0,0x00,0x00,0x00,0x00,0x38,0x3F,0x07,0x06,0x06,0x06,0x06,0x07,0x3F,0x38,0x00, // Ă  c4 82
+		0x00,0x00,0x40,0x60,0x64,0x68,0x68,0x68,0x64,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x33,0x3F,0x3F,0x00, // ă  c4 83
+		0x00,0x00,0x00,0xE0,0xFC,0x1F,0x1F,0xFC,0xE0,0x00,0x00,0x00,0x00,0x38,0x3F,0x07,0x06,0x06,0x06,0x06,0x67,0xBF,0xB8,0x00, // Ą  c4 84
+		0x00,0x00,0x40,0x60,0x60,0x60,0x60,0x60,0x60,0xE0,0xC0,0x00,0x00,0x1C,0x3E,0x33,0x33,0x33,0x33,0x33,0x73,0xBF,0xBF,0x00, // ą  c4 85
+		0x00,0x80,0xE0,0x70,0x38,0x18,0x1A,0x1B,0x39,0x70,0x60,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00, // Ć  c4 86
+		0x00,0x80,0xC0,0xE0,0x60,0x60,0x68,0x6C,0x64,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x18,0x08,0x00, // ć  c4 87
+		0x00,0x80,0xE0,0x70,0x3A,0x1B,0x19,0x1B,0x3A,0x70,0x60,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00, // Ĉ  c4 88
+		0x00,0x80,0xC0,0xE0,0x68,0x6C,0x64,0x6C,0x68,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x18,0x08,0x00, // ĉ  c4 89
+		0x00,0x80,0xE0,0x70,0x38,0x18,0x1A,0x18,0x38,0x70,0x60,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00, // Ċ  c4 8a
+		0x00,0x80,0xC0,0xE0,0x60,0x60,0x68,0x60,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x18,0x08,0x00, // ċ  c4 8b
+		0x00,0x80,0xE0,0x70,0x39,0x1B,0x1A,0x1B,0x39,0x70,0x60,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x30,0x38,0x1C,0x0C,0x00, // Č  c4 8c
+		0x00,0x80,0xC0,0xE0,0x64,0x6C,0x68,0x6C,0x64,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x18,0x08,0x00, // č  c4 8d
+		0x00,0xF8,0xF8,0x19,0x1B,0x1A,0x1B,0x39,0x70,0xE0,0x80,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00, // Ď  c4 8e
+		0x00,0x80,0xC0,0xE0,0x60,0x60,0xE0,0xFF,0xFF,0x00,0x05,0x03,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x3F,0x3F,0x00,0x00,0x00, // ď  c4 8f
+		//V208
+		0xC0,0xFF,0xFF,0xC3,0xC3,0x03,0x03,0x07,0x0E,0xFC,0xF0,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00, // Đ  c4 90
+		0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0xE4,0xC4,0xFF,0xFF,0x04,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x30,0x3F,0x3F,0x00, // đ  c4 91
+		0x00,0xFC,0xFC,0x8C,0x8D,0x8D,0x8D,0x8D,0x8C,0x0C,0x0C,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00, // Ē  c4 92
+		0x00,0x80,0xC0,0xE0,0x68,0x68,0x68,0x68,0x68,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x01,0x00, // ē  c4 93
+		0x00,0xF8,0xF8,0x98,0x99,0x9A,0x9A,0x99,0x98,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00, // Ĕ  c4 94
+		0x00,0x80,0xC0,0xE0,0x64,0x68,0x68,0x68,0x64,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x01,0x00, // ĕ  c4 95
+		0x00,0xF8,0xF8,0x98,0x98,0x98,0x9A,0x98,0x98,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00, // Ė  c4 96
+		0x00,0x80,0xC0,0xE0,0x60,0x60,0x68,0x60,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x01,0x00, // ė  c4 97
+		0x00,0xFF,0xFF,0xC3,0xC3,0xC3,0xC3,0xC3,0xC3,0x03,0x03,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x70,0xB0,0xB0,0x00, // Ę  c4 98
+		0x00,0x80,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x73,0xB3,0xB3,0x13,0x01,0x00, // ę  c4 99
+		0x00,0xF8,0xF8,0x98,0x99,0x9B,0x9A,0x9B,0x99,0x18,0x18,0x00,0x00,0x3F,0x3F,0x31,0x31,0x31,0x31,0x31,0x31,0x30,0x30,0x00, // Ě  c4 9a
+		0x00,0x80,0xC0,0xE0,0x64,0x6C,0x68,0x6C,0x64,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x3B,0x33,0x33,0x33,0x33,0x33,0x13,0x01,0x00, // ě  c4 9b
+		0x00,0x80,0xE0,0x70,0x1A,0x1B,0x19,0x1B,0x1A,0x38,0x30,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x33,0x33,0x33,0x3F,0x3F,0x00, // Ĝ  c4 9c
+		0x00,0x80,0xC0,0xE0,0x68,0x6C,0x64,0x6C,0x68,0xE0,0xE0,0x00,0x00,0x03,0xC7,0xCE,0xCC,0xCC,0xCC,0xCC,0xE6,0x7F,0x3F,0x00, // ĝ  c4 9d
+		0x00,0x80,0xE0,0x70,0x1A,0x19,0x19,0x19,0x1A,0x38,0x30,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x33,0x33,0x33,0x3F,0x3F,0x00, // Ğ  c4 9e
+		0x00,0x80,0xC0,0xE0,0x68,0x64,0x64,0x64,0x68,0xE0,0xE0,0x00,0x00,0x03,0xC7,0xCE,0xCC,0xCC,0xCC,0xCC,0xE6,0x7F,0x3F,0x00, // ğ  c4 9f
+		//V224 -
+		0x00,0x80,0xE0,0x70,0x18,0x18,0x1A,0x18,0x18,0x38,0x30,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x33,0x33,0x33,0x3F,0x3F,0x00, // Ġ  c4 a0
+		0x00,0x80,0xC0,0xE0,0x60,0x60,0x68,0x60,0x60,0xE0,0xE0,0x00,0x00,0x03,0xC7,0xCE,0xCC,0xCC,0xCC,0xCC,0xE6,0x7F,0x3F,0x00, // ġ  c4 a1
+		0x00,0xF0,0xFC,0x0E,0x07,0x03,0xC3,0xC3,0xC3,0xC7,0xC6,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0xB0,0x70,0x30,0x3F,0x3F,0x00, // Ģ  c4 a2
+		0x00,0x80,0xC0,0xE0,0x60,0x60,0x6C,0x6A,0x60,0xE0,0xE0,0x00,0x00,0x03,0xC7,0xCE,0xCC,0xCC,0xCC,0xCC,0xE6,0x7F,0x3F,0x00, // ģ  c4 a3
+		0x00,0xFC,0xFC,0x80,0x82,0x81,0x81,0x82,0x80,0xFC,0xFC,0x00,0x00,0x3F,0x3F,0x01,0x01,0x01,0x01,0x01,0x01,0x3F,0x3F,0x00, // Ĥ  c4 a4
+		0x00,0xFE,0xFE,0xC0,0x62,0x63,0x61,0xE3,0xC2,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00, // ĥ  c4 a5
+		0x02,0xFF,0xFF,0xC2,0xC2,0xC2,0xC2,0xC2,0xC2,0xFF,0xFF,0x02,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00, // Ħ  c4 a6
+		0x04,0xFF,0xFF,0xC4,0x64,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00, // ħ  c4 a7
+		0x00,0x00,0x00,0x1A,0x19,0xFB,0xFB,0x1A,0x19,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00, // Ĩ  c4 a8
+		0x00,0x00,0x00,0x08,0x64,0xEC,0xE8,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00, // ĩ  c4 a9
+		0x00,0x00,0x00,0x0C,0x0D,0xFD,0xFD,0x0D,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00, // Ī  c4 aa
+		0x00,0x00,0x00,0x08,0x68,0xE8,0xE8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00, // ī  c4 ab
+		0x00,0x00,0x00,0x18,0x19,0xFA,0xFA,0x19,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00, // Ĭ  c4 ac
+		0x00,0x00,0x00,0x00,0x64,0xE8,0xE8,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00, // ĭ  c4 ad
+		0x00,0x00,0x00,0x03,0x03,0xFF,0xFF,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x7F,0xBF,0xB0,0x30,0x00,0x00,0x00, // Į  c4 ae
+		0x00,0x00,0x00,0x00,0x60,0xEC,0xEC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x7F,0xBF,0xB0,0x30,0x00,0x00,0x00, // į  c4 af
+		//V240
+		0x00,0x00,0x00,0x18,0x18,0xF8,0xFA,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00, // İ  c4 b0
+		0x00,0x00,0x00,0x00,0x60,0xE0,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00, // ı  c4 b1
+		0x00,0x03,0xFF,0xFF,0x03,0x00,0x00,0x00,0x03,0xFF,0xFF,0x00,0x00,0x30,0x3F,0x3F,0x30,0x0C,0x1C,0x30,0x30,0x3F,0x1F,0x00, // IJ  c4 b2
+		0x00,0x00,0x20,0xEC,0xEC,0x00,0x00,0x20,0xEC,0xEC,0x00,0x00,0x00,0x00,0x30,0x3F,0x3F,0x70,0xC0,0xC0,0xFF,0x7F,0x00,0x00, // ij  c4 b3
+		0x00,0x00,0x00,0x00,0x02,0x03,0x01,0x03,0x02,0xF8,0xF8,0x00,0x00,0x0E,0x1E,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00, // Ĵ  c4 b4
+		0x00,0x00,0x00,0x00,0x00,0x08,0x6C,0xE4,0xEC,0x08,0x00,0x00,0x00,0x00,0x00,0x60,0xE0,0xC0,0xC0,0xFF,0x7F,0x00,0x00,0x00, // ĵ  c4 b5
+		0x00,0xFF,0xFF,0xC0,0xE0,0xF0,0x38,0x1C,0x0E,0x07,0x03,0x00,0x00,0x3F,0x3F,0x00,0x01,0xA3,0x67,0x0E,0x1C,0x38,0x30,0x00, // Ķ  c4 b6
+		0x00,0x00,0xFF,0xFF,0x00,0x80,0xC0,0xE0,0x60,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x03,0xA7,0x6F,0x1C,0x38,0x30,0x00,0x00, // ķ  c4 b7
+		0x00,0x00,0xE0,0xE0,0x00,0x80,0xC0,0xE0,0x60,0x20,0x00,0x00,0x00,0x00,0x3F,0x3F,0x03,0x07,0x0F,0x1C,0x38,0x30,0x00,0x00, // ĸ  c4 b8
+		0x00,0xF8,0xFA,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00, // Ĺ  c4 b9
+		0x00,0x00,0x00,0x00,0x18,0xFA,0xFB,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00, // ĺ  c4 ba
+		0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0xB0,0x70,0x30,0x30,0x30,0x30,0x00, // Ļ  c4 bb
+		0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0xBF,0x7F,0x30,0x30,0x00,0x00,0x00, // ļ  c4 bc
+		0x00,0xFF,0xFF,0x00,0x00,0x05,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00, // Ľ  c4 bd
+		0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0x00,0x05,0x03,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00, // ľ  c4 be
+		0x00,0xFF,0xFF,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00, // Ŀ  c4 bf
+
+		//V256 ---- PAGE U+0140-U+017F (UTF 0xC580-0xC5BF) ----
+		0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00, // ŀ  c5 80
+		0x80,0xFF,0xFF,0x20,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x00, // Ł  c5 81
+		0x00,0x00,0x00,0x00,0x83,0xFF,0xFF,0x20,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x31,0x30,0x3F,0x3F,0x30,0x30,0x00,0x00,0x00, // ł  c5 82
+		0x00,0xFF,0xFF,0x0E,0x38,0xF2,0xC3,0x01,0x00,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x03,0x07,0x1C,0x3F,0x3F,0x00, // Ń  c5 83
+		0x00,0x00,0xE0,0xE0,0x60,0x68,0x6C,0x64,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00, // ń  c5 84
+		0x00,0xFF,0xFF,0x0E,0x38,0xF0,0xC0,0x00,0x00,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0xA0,0x63,0x07,0x1C,0x3F,0x3F,0x00, // Ņ  c5 85
+		0x00,0x00,0xE0,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0xA0,0x60,0x00,0x3F,0x3F,0x00, // ņ  c5 86
+		0x00,0xFF,0xFF,0x0E,0x38,0xF1,0xC2,0x01,0x00,0xFF,0xFF,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x03,0x07,0x1C,0x3F,0x3F,0x00, // Ň  c5 87
+		0x00,0x00,0xE0,0xE0,0x64,0x6C,0x68,0x6C,0xE4,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00, // ň  c5 88
+		0x00,0x0A,0xE6,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00, // ʼn  c5 89
+		0x00,0x00,0xFF,0xFF,0x06,0x03,0x03,0x03,0x07,0xFE,0xFC,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x20,0x20,0x30,0x1F,0x0F,0x00, // Ŋ  c5 8a
+		0x00,0x00,0xE0,0xE0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x80,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0xC0,0xC0,0xFF,0x7F,0x00, // ŋ  c5 8b
+		0x00,0xC0,0xF0,0x38,0x1D,0x0D,0x0D,0x1D,0x38,0xF0,0xC0,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00, // Ō  c5 8c
+		0x00,0x80,0xC0,0xE0,0x68,0x68,0x68,0x68,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00, // ō  c5 8d
+		0x00,0x80,0xE0,0x70,0x39,0x1A,0x1A,0x39,0x70,0xE0,0x80,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00, // Ŏ  c5 8e
+		0x00,0x80,0xC0,0xE0,0x64,0x68,0x68,0x64,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00, // ŏ  c5 8f
+		//V272
+		0x00,0x80,0xE0,0x70,0x3A,0x19,0x1A,0x39,0x70,0xE0,0x80,0x00,0x00,0x03,0x0F,0x1C,0x38,0x30,0x30,0x38,0x1C,0x0F,0x03,0x00, // Ő  c5 90
+		0x00,0x80,0xC0,0xE0,0x68,0x64,0x68,0x64,0xE0,0xC0,0x80,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x0F,0x00, // ő  c5 91
+		0xF0,0xFC,0x0E,0x03,0x03,0x07,0xFE,0xFF,0xC3,0xC3,0xC3,0x00,0x03,0x0F,0x1C,0x30,0x30,0x38,0x1F,0x3F,0x30,0x30,0x30,0x00, // Π c5 92
+		0x80,0xC0,0xE0,0x60,0x60,0xE0,0xC0,0x60,0x60,0x60,0x40,0x80,0x0F,0x1F,0x38,0x30,0x30,0x1F,0x1F,0x3B,0x33,0x33,0x1B,0x09, // œ  c5 93
+		0x00,0xF8,0xF8,0x98,0x98,0x9A,0x9B,0x99,0xF8,0xF0,0x60,0x00,0x00,0x3F,0x3F,0x01,0x01,0x03,0x07,0x0F,0x1D,0x38,0x30,0x00, // Ŕ  c5 94
+		0x00,0x00,0xE0,0xE0,0xC0,0x60,0x68,0x6C,0x64,0xE0,0xC0,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ŕ  c5 95
+		0x00,0xFF,0xFF,0x83,0x83,0x83,0x83,0x83,0xC7,0xFE,0x7C,0x00,0x00,0x3F,0x3F,0x01,0x01,0xA3,0x67,0x0F,0x1D,0x38,0x30,0x00, // Ŗ  c5 96
+		0x00,0x00,0xE0,0xE0,0xC0,0x60,0x60,0x60,0x60,0xE0,0xC0,0x00,0x00,0x00,0x3F,0x3F,0x00,0xA0,0x60,0x00,0x00,0x00,0x00,0x00, // ŗ  c5 97
+		0x00,0xF8,0xF8,0x99,0x9B,0x9A,0x9B,0x99,0xF8,0xF0,0x60,0x00,0x00,0x3F,0x3F,0x01,0x01,0x03,0x07,0x0F,0x1D,0x38,0x30,0x00, // Ř  c5 98
+		0x00,0x00,0xE0,0xE0,0xC4,0x6C,0x68,0x6C,0x64,0xE0,0xC0,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ř  c5 99
+		0x00,0x60,0xF0,0xF8,0x98,0x9A,0x9B,0x99,0x98,0x30,0x20,0x00,0x00,0x0C,0x1C,0x39,0x31,0x31,0x31,0x31,0x3B,0x1F,0x0E,0x00, // Ś  c5 9a
+		0x00,0xC0,0xE0,0x60,0x68,0x6C,0x64,0x60,0x40,0x00,0x00,0x00,0x00,0x11,0x33,0x33,0x33,0x33,0x33,0x3F,0x1E,0x00,0x00,0x00, // ś  c5 9b
+		0x00,0x60,0xF0,0xF8,0x9A,0x9B,0x99,0x9B,0x9A,0x30,0x20,0x00,0x00,0x0C,0x1C,0x39,0x31,0x31,0x31,0x31,0x3B,0x1F,0x0E,0x00, // Ŝ  c5 9c
+		0x00,0xC0,0xE0,0x68,0x6C,0x64,0x6C,0x68,0x40,0x00,0x00,0x00,0x00,0x11,0x33,0x33,0x33,0x33,0x33,0x3F,0x1E,0x00,0x00,0x00, // ŝ  c5 9d
+		0x00,0x3C,0x7E,0xE7,0xC3,0xC3,0xC3,0xC3,0xC7,0x8E,0x0C,0x00,0x00,0x0C,0x1C,0x38,0x30,0xB0,0xF0,0x30,0x39,0x1F,0x0F,0x00, // Ş  c5 9e
+		0x00,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0x40,0x00,0x00,0x00,0x00,0x11,0x33,0x33,0xB3,0xF3,0x33,0x3F,0x1E,0x00,0x00,0x00, // ş  c5 9f
+		//V288
+		0x00,0x60,0xF0,0xF8,0x99,0x9B,0x9A,0x9B,0x99,0x30,0x20,0x00,0x00,0x0C,0x1C,0x39,0x31,0x31,0x31,0x31,0x3B,0x1F,0x0E,0x00, // Š  c5 a0
+		0x00,0xC0,0xE0,0x64,0x6C,0x68,0x6C,0x64,0x40,0x00,0x00,0x00,0x00,0x11,0x33,0x33,0x33,0x33,0x33,0x3F,0x1E,0x00,0x00,0x00, // š  c5 a1
+		0x00,0x00,0x03,0x03,0x03,0xFF,0xFF,0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xBF,0xBF,0x60,0x00,0x00,0x00,0x00, // Ţ  c5 a2
+		0x00,0x60,0x60,0xFE,0xFE,0x60,0x60,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x3F,0xB0,0xB0,0xF0,0x30,0x00,0x00,0x00, // ţ  c5 a3
+		0x00,0x00,0x18,0x19,0x1B,0xFA,0xFA,0x1B,0x19,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00, // Ť  c5 a4
+		0x00,0x60,0x60,0xFE,0xFE,0x60,0x65,0x63,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x3F,0x30,0x30,0x30,0x30,0x00,0x00,0x00, // ť  c5 a5
+		0x00,0x00,0x03,0xC3,0xC3,0xFF,0xFF,0xC3,0xC3,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00, // Ŧ  c5 a6
+		0x00,0x30,0x30,0xFE,0xFE,0x30,0x30,0x30,0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x1F,0x3F,0x33,0x33,0x30,0x30,0x00,0x00,0x00, // ŧ  c5 a7
+		0x00,0xF8,0xF8,0x02,0x01,0x03,0x03,0x02,0x01,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00, // Ũ  c5 a8
+		0x00,0xE0,0xE0,0x08,0x04,0x0C,0x0C,0x08,0x04,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00, // ũ  c5 a9
+		0x00,0xFC,0xFC,0x00,0x01,0x01,0x01,0x01,0x00,0xFC,0xFC,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00, // Ū  c5 aa
+		0x00,0xE0,0xE0,0x00,0x08,0x08,0x08,0x08,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00, // ū  c5 ab
+		0x00,0xFC,0xFC,0x00,0x01,0x02,0x02,0x01,0x00,0xFC,0xFC,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00, // Ŭ  c5 ac
+		0x00,0xE0,0xE0,0x00,0x04,0x08,0x08,0x04,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00, // ŭ  c5 ad
+		0x00,0xF8,0xF8,0x00,0x06,0x09,0x09,0x06,0x00,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00, // Ů  c5 ae
+		0x00,0xE0,0xE0,0x00,0x0C,0x12,0x12,0x0C,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00, // ů  c5 af
+		//V304
+		0x00,0xF8,0xF8,0x00,0x02,0x01,0x02,0x01,0x00,0xF8,0xF8,0x00,0x00,0x07,0x1F,0x38,0x30,0x30,0x30,0x30,0x38,0x1F,0x07,0x00, // Ű  c5 b0
+		0x00,0xE0,0xE0,0x00,0x08,0x04,0x08,0x04,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0x30,0x30,0x30,0x18,0x3F,0x3F,0x00, // ű  c5 b1
+		0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x07,0x1F,0x38,0x30,0xF0,0xB0,0xB0,0x38,0x1F,0x07,0x00, // Ų  c5 b2
+		0x00,0xE0,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0xE0,0x00,0x00,0x0F,0x1F,0x38,0x30,0xF0,0xB0,0xB0,0x18,0x3F,0x3F,0x00, // ų  c5 b3
+		0x00,0xFC,0xFC,0x00,0x02,0x81,0x81,0x02,0x00,0xFC,0xFC,0x00,0x00,0x3F,0x3F,0x1C,0x06,0x03,0x03,0x06,0x1C,0x3F,0x3F,0x00, // Ŵ  c5 b4
+		0x00,0xE0,0xE0,0x00,0x04,0xE8,0xE8,0x04,0x00,0xE0,0xE0,0x00,0x00,0x07,0x1F,0x38,0x1C,0x0F,0x0F,0x1C,0x38,0x1F,0x07,0x00, // ŵ  c5 b5
+		0x00,0x02,0x0E,0x3C,0xF2,0xC1,0xC1,0xF2,0x3C,0x0E,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00, // Ŷ  c5 b6
+		0x00,0x00,0x60,0xE0,0x88,0x04,0x04,0x88,0xE0,0x60,0x00,0x00,0x00,0x00,0x00,0x81,0xE7,0x7E,0x1E,0x07,0x01,0x00,0x00,0x00, // ŷ  c5 b7
+		0x00,0x02,0x0E,0x3C,0xF1,0xC0,0xC0,0xF1,0x3C,0x0E,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00, // Ÿ  c5 b8
+		0x00,0x18,0x18,0x18,0x18,0x1A,0x9B,0xD9,0xF8,0x78,0x38,0x00,0x00,0x30,0x38,0x3C,0x3E,0x37,0x33,0x31,0x30,0x30,0x30,0x00, // Ź  c5 b9
+		0x00,0x60,0x60,0x60,0x68,0x6C,0xE4,0xE0,0x60,0x20,0x00,0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x31,0x30,0x30,0x30,0x00,0x00, // ź  c5 ba
+		0x00,0x18,0x18,0x18,0x18,0x18,0x9A,0xD8,0xF8,0x78,0x38,0x00,0x00,0x30,0x38,0x3C,0x3E,0x37,0x33,0x31,0x30,0x30,0x30,0x00, // Ż  c5 bb
+		0x00,0x60,0x60,0x60,0x60,0x68,0xE0,0xE0,0x60,0x20,0x00,0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x31,0x30,0x30,0x30,0x00,0x00, // ż  c5 bc
+		0x00,0x18,0x18,0x18,0x19,0x1B,0x9A,0xDB,0xF9,0x78,0x38,0x00,0x00,0x30,0x38,0x3C,0x3E,0x37,0x33,0x31,0x30,0x30,0x30,0x00, // Ž  c5 bd
+		0x00,0x60,0x60,0x64,0x6C,0x68,0xEC,0xE4,0x60,0x20,0x00,0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x31,0x30,0x30,0x30,0x00,0x00, // ž  c5 be
+		0x00,0x00,0x00,0x00,0xFC,0xFE,0x06,0x06,0x0E,0x0C,0x00,0x00,0x00,0x00,0x30,0x30,0x3F,0x3F,0x30,0x00,0x00,0x00,0x00,0x00, // ſ  c5 bf
+#endif
 };
 
 const uint8_t ExtraFontChars[] = {
@@ -449,7 +593,6 @@ const uint8_t idleScreenBGF[] = {
 
 
 const unsigned char ASCII6x8[] = {
-//1*8*6 һ<><D2BB>
 		0x00, 0x00, 0x00, 0x00, 0x00, 0x00,    // sp
 		0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,    // !
 		0x00, 0x00, 0x07, 0x00, 0x07, 0x00,    // "