Add key auto-repeat

.gitignore

@@ -37,3 +37,4 @@ workspace/.metadata/*
 
 workspace/ts100/.settings/language.settings.xml
 workspace/ts100/.cproject
+TS100/KiCad/TS100.bak

README.md

@@ -55,8 +55,7 @@ If you leave the unit alone (ie don't press any buttons) on a setting, after 3 s
 * STMP -> The temperature the unit drops to in sleep mode
 * SLTME -> Sleep time, how long it takes before the unit goes to sleep
 * SHTME -> Shutdown Time, how long the unit will wait after movement before shutting down completely
-* MOTION -> Wether motion detection is enabled or not
-* MSENSE -> Motion Sensitivity,1-8, 8 is most sensitive, 1 is least sensitive (ie takes more movement to trigger)
+* MSENSE -> Motion Sensitivity,0-9,0 means motion sensing is turned off, 9 is most sensitive, 1 is least sensitive (ie takes more movement to trigger)
 * TMPUNIT -> Temperature unit, C or F
 * TMPRND -> Temperature Rounding, {1,5,10}
 * TMPSPD -> How fast the temperature should update in the soldering status screen.
@@ -75,6 +74,10 @@ This allows you to change the front key (one near the tip) to become a boost but
 
 The boost temperature is set in the settings menu.
 # Version Changes:
+V1.12
+- Increases sensitivity options to be 1-9 with 0 off state
+- Fixes issue where going from COOL -> soldering can leave screen off.
+
 V1.11
 - Boost mode
 - Change sensitivity options to be 1-8

TS100/KiCad/MCU_SubBoard.sch

@@ -0,0 +1,392 @@
+EESchema Schematic File Version 2
+LIBS:power
+LIBS:device
+LIBS:transistors
+LIBS:conn
+LIBS:linear
+LIBS:regul
+LIBS:74xx
+LIBS:cmos4000
+LIBS:adc-dac
+LIBS:memory
+LIBS:xilinx
+LIBS:microcontrollers
+LIBS:dsp
+LIBS:microchip
+LIBS:analog_switches
+LIBS:motorola
+LIBS:texas
+LIBS:intel
+LIBS:audio
+LIBS:interface
+LIBS:digital-audio
+LIBS:philips
+LIBS:display
+LIBS:cypress
+LIBS:siliconi
+LIBS:opto
+LIBS:atmel
+LIBS:contrib
+LIBS:valves
+LIBS:stm32
+LIBS:mma8652fc
+LIBS:switches
+LIBS:TS100-cache
+EELAYER 25 0
+EELAYER END
+$Descr A4 11693 8268
+encoding utf-8
+Sheet 2 2
+Title "TS100 Soldering Iron Schematic"
+Date ""
+Rev "2.46"
+Comp ""
+Comment1 ""
+Comment2 ""
+Comment3 "Converted by Ben V. Brown"
+Comment4 "KiCad port of published schematic"
+$EndDescr
+$Comp
+L STM32F103T8Ux U4
+U 1 1 591D59BB
+P 5600 3550
+F 0 "U4" H 3200 4675 50  0000 L BNN
+F 1 "STM32F103T8Ux" H 8000 4675 50  0000 R BNN
+F 2 "Housings_DFN_QFN:QFN-36-1EP_6x6mm_Pitch0.5mm" H 8000 4625 50  0001 R TNN
+F 3 "" H 5600 3550 50  0001 C CNN
+F 4 "-" H 5600 3550 60  0001 C CNN "bom_partno"
+	1    5600 3550
+	1    0    0    -1  
+$EndComp
+$Comp
+L GND #PWR206
+U 1 1 591D5AD3
+P 5600 4850
+F 0 "#PWR206" H 5600 4600 50  0001 C CNN
+F 1 "GND" H 5600 4700 50  0000 C CNN
+F 2 "" H 5600 4850 50  0001 C CNN
+F 3 "" H 5600 4850 50  0001 C CNN
+	1    5600 4850
+	1    0    0    -1  
+$EndComp
+$Comp
+L C C30
+U 1 1 591D5BA8
+P 1450 4700
+F 0 "C30" H 1475 4800 50  0000 L CNN
+F 1 "103" H 1475 4600 50  0000 L CNN
+F 2 "" H 1488 4550 50  0001 C CNN
+F 3 "" H 1450 4700 50  0001 C CNN
+	1    1450 4700
+	1    0    0    -1  
+$EndComp
+$Comp
+L R R23
+U 1 1 591D5BDF
+P 1700 4700
+F 0 "R23" V 1780 4700 50  0000 C CNN
+F 1 "15K" V 1700 4700 50  0000 C CNN
+F 2 "" V 1630 4700 50  0001 C CNN
+F 3 "" H 1700 4700 50  0001 C CNN
+	1    1700 4700
+	1    0    0    -1  
+$EndComp
+Wire Wire Line
+	5800 4850 5800 4650
+Wire Wire Line
+	5600 4850 5600 4650
+Wire Wire Line
+	5700 4650 5700 4850
+Connection ~ 5700 4850
+Wire Wire Line
+	5500 4850 5500 4650
+Connection ~ 5600 4850
+Wire Wire Line
+	5400 4850 5400 4650
+Connection ~ 5500 4850
+Wire Wire Line
+	3100 2950 1350 2950
+Wire Wire Line
+	1350 2950 1350 4850
+Connection ~ 5400 4850
+Wire Wire Line
+	1450 4550 1450 3550
+Wire Wire Line
+	1450 3550 3100 3550
+Wire Wire Line
+	1350 4850 9000 4850
+Connection ~ 1450 4850
+Text HLabel 8100 4050 2    60   Input ~ 0
+SWDIO
+Text HLabel 8100 4150 2    60   Input ~ 0
+SWCLK
+Text HLabel 8100 3850 2    60   Input ~ 0
+USB_D-
+Text HLabel 8100 3950 2    60   Input ~ 0
+USB_D+
+Wire Wire Line
+	1700 4550 1700 3750
+Wire Wire Line
+	1700 3750 3100 3750
+Connection ~ 1700 4850
+Text HLabel 8100 3650 2    60   Input ~ 0
+K1
+Text HLabel 8100 3550 2    60   Input ~ 0
+nCR
+Text HLabel 9000 3450 2    60   Input ~ 0
+TMP36
+Wire Wire Line
+	5400 2350 5700 2350
+Connection ~ 5500 2350
+Connection ~ 5600 2350
+$Comp
+L VDD #PWR205
+U 1 1 591D5F85
+P 5550 2350
+F 0 "#PWR205" H 5550 2200 50  0001 C CNN
+F 1 "VDD" H 5550 2500 50  0000 C CNN
+F 2 "" H 5550 2350 50  0001 C CNN
+F 3 "" H 5550 2350 50  0001 C CNN
+	1    5550 2350
+	1    0    0    -1  
+$EndComp
+Connection ~ 5550 2350
+Text HLabel 8100 3350 2    60   Input ~ 0
+K2
+$Comp
+L C C29
+U 1 1 591D61F5
+P 9000 4700
+F 0 "C29" H 9025 4800 50  0000 L CNN
+F 1 "103" H 9025 4600 50  0000 L CNN
+F 2 "" H 9038 4550 50  0001 C CNN
+F 3 "" H 9000 4700 50  0001 C CNN
+	1    9000 4700
+	1    0    0    -1  
+$EndComp
+Connection ~ 5800 4850
+Wire Wire Line
+	9000 4550 9000 3450
+Wire Wire Line
+	9000 3450 8100 3450
+Text HLabel 3100 4150 0    60   Input ~ 0
+SCL
+Text HLabel 3100 4250 0    60   Input ~ 0
+SDA
+Text HLabel 3100 3950 0    60   Input ~ 0
+Po
+Text HLabel 3100 3650 0    60   Input ~ 0
+Vb
+$Comp
+L R R25
+U 1 1 591D65E3
+P 1950 2600
+F 0 "R25" V 2030 2600 50  0000 C CNN
+F 1 "15K" V 1950 2600 50  0000 C CNN
+F 2 "" V 1880 2600 50  0001 C CNN
+F 3 "" H 1950 2600 50  0001 C CNN
+	1    1950 2600
+	1    0    0    -1  
+$EndComp
+$Comp
+L C C17
+U 1 1 591D663E
+P 1950 4700
+F 0 "C17" H 1975 4800 50  0000 L CNN
+F 1 "105" H 1975 4600 50  0000 L CNN
+F 2 "" H 1988 4550 50  0001 C CNN
+F 3 "" H 1950 4700 50  0001 C CNN
+	1    1950 4700
+	1    0    0    -1  
+$EndComp
+Wire Wire Line
+	1950 4550 1950 2750
+Wire Wire Line
+	1950 2750 3100 2750
+$Comp
+L VDD #PWR201
+U 1 1 591D66BF
+P 1950 2450
+F 0 "#PWR201" H 1950 2300 50  0001 C CNN
+F 1 "VDD" H 1950 2600 50  0000 C CNN
+F 2 "" H 1950 2450 50  0001 C CNN
+F 3 "" H 1950 2450 50  0001 C CNN
+	1    1950 2450
+	1    0    0    -1  
+$EndComp
+$Comp
+L MMA8652FC U3
+U 1 1 591D6A94
+P 3750 6350
+F 0 "U3" H 3400 5950 60  0000 C CNN
+F 1 "MMA8652FC" H 3950 5950 60  0000 C CNN
+F 2 "" H 3550 6100 60  0001 C CNN
+F 3 "" H 3550 6100 60  0000 C CNN
+	1    3750 6350
+	1    0    0    -1  
+$EndComp
+$Comp
+L GND #PWR204
+U 1 1 591D6B9E
+P 4650 6700
+F 0 "#PWR204" H 4650 6450 50  0001 C CNN
+F 1 "GND" H 4650 6550 50  0000 C CNN
+F 2 "" H 4650 6700 50  0001 C CNN
+F 3 "" H 4650 6700 50  0001 C CNN
+	1    4650 6700
+	1    0    0    -1  
+$EndComp
+Wire Wire Line
+	4500 6600 4650 6600
+Wire Wire Line
+	4650 6400 4650 6700
+Wire Wire Line
+	4500 6400 4650 6400
+Connection ~ 4650 6600
+Wire Wire Line
+	4500 6500 4650 6500
+Connection ~ 4650 6500
+$Comp
+L VDD #PWR203
+U 1 1 591D6DA1
+P 4650 5900
+F 0 "#PWR203" H 4650 5750 50  0001 C CNN
+F 1 "VDD" H 4650 6050 50  0000 C CNN
+F 2 "" H 4650 5900 50  0001 C CNN
+F 3 "" H 4650 5900 50  0001 C CNN
+	1    4650 5900
+	1    0    0    -1  
+$EndComp
+Wire Wire Line
+	4650 5900 4650 6200
+Wire Wire Line
+	4650 6100 4500 6100
+Wire Wire Line
+	4650 6200 4500 6200
+Connection ~ 4650 6100
+$Comp
+L C C22
+U 1 1 591D70DB
+P 2250 6550
+F 0 "C22" H 2275 6650 50  0000 L CNN
+F 1 "104" H 2275 6450 50  0000 L CNN
+F 2 "" H 2288 6400 50  0001 C CNN
+F 3 "" H 2250 6550 50  0001 C CNN
+	1    2250 6550
+	1    0    0    -1  
+$EndComp
+Text HLabel 3050 6350 0    60   Input ~ 0
+SDA
+Text HLabel 3050 6250 0    60   Input ~ 0
+SCL
+Wire Wire Line
+	2250 6400 2250 6100
+Wire Wire Line
+	2250 6100 3050 6100
+$Comp
+L GND #PWR202
+U 1 1 591D735E
+P 2250 6700
+F 0 "#PWR202" H 2250 6450 50  0001 C CNN
+F 1 "GND" H 2250 6550 50  0000 C CNN
+F 2 "" H 2250 6700 50  0001 C CNN
+F 3 "" H 2250 6700 50  0001 C CNN
+	1    2250 6700
+	1    0    0    -1  
+$EndComp
+$Comp
+L C C18
+U 1 1 591D7528
+P 8200 5800
+F 0 "C18" H 8225 5900 50  0000 L CNN
+F 1 "105" H 8225 5700 50  0000 L CNN
+F 2 "" H 8238 5650 50  0001 C CNN
+F 3 "" H 8200 5800 50  0001 C CNN
+	1    8200 5800
+	1    0    0    -1  
+$EndComp
+$Comp
+L C C19
+U 1 1 591D75B9
+P 8500 5800
+F 0 "C19" H 8525 5900 50  0000 L CNN
+F 1 "105" H 8525 5700 50  0000 L CNN
+F 2 "" H 8538 5650 50  0001 C CNN
+F 3 "" H 8500 5800 50  0001 C CNN
+	1    8500 5800
+	1    0    0    -1  
+$EndComp
+$Comp
+L C C20
+U 1 1 591D75EF
+P 8800 5800
+F 0 "C20" H 8825 5900 50  0000 L CNN
+F 1 "105" H 8825 5700 50  0000 L CNN
+F 2 "" H 8838 5650 50  0001 C CNN
+F 3 "" H 8800 5800 50  0001 C CNN
+	1    8800 5800
+	1    0    0    -1  
+$EndComp
+$Comp
+L C C25
+U 1 1 591D7626
+P 9100 5800
+F 0 "C25" H 9125 5900 50  0000 L CNN
+F 1 "104" H 9125 5700 50  0000 L CNN
+F 2 "" H 9138 5650 50  0001 C CNN
+F 3 "" H 9100 5800 50  0001 C CNN
+	1    9100 5800
+	1    0    0    -1  
+$EndComp
+$Comp
+L C C21
+U 1 1 591D7668
+P 9400 5800
+F 0 "C21" H 9425 5900 50  0000 L CNN
+F 1 "105" H 9425 5700 50  0000 L CNN
+F 2 "" H 9438 5650 50  0001 C CNN
+F 3 "" H 9400 5800 50  0001 C CNN
+	1    9400 5800
+	1    0    0    -1  
+$EndComp
+Wire Wire Line
+	8200 5950 9400 5950
+Connection ~ 8500 5950
+Connection ~ 8800 5950
+Connection ~ 9100 5950
+Wire Wire Line
+	8200 5650 9400 5650
+Connection ~ 9100 5650
+Connection ~ 8800 5650
+Connection ~ 8500 5650
+$Comp
+L GND #PWR208
+U 1 1 591D78AD
+P 8800 5950
+F 0 "#PWR208" H 8800 5700 50  0001 C CNN
+F 1 "GND" H 8800 5800 50  0000 C CNN
+F 2 "" H 8800 5950 50  0001 C CNN
+F 3 "" H 8800 5950 50  0001 C CNN
+	1    8800 5950
+	1    0    0    -1  
+$EndComp
+$Comp
+L VDD #PWR207
+U 1 1 591D78DF
+P 8800 5650
+F 0 "#PWR207" H 8800 5500 50  0001 C CNN
+F 1 "VDD" H 8800 5800 50  0000 C CNN
+F 2 "" H 8800 5650 50  0001 C CNN
+F 3 "" H 8800 5650 50  0001 C CNN
+	1    8800 5650
+	1    0    0    -1  
+$EndComp
+Text Label 3050 6600 2    60   ~ 0
+ACC_INT2
+Text Label 3050 6500 2    60   ~ 0
+ACC_INT1
+Text Label 3100 3850 2    60   ~ 0
+ACC_INT2
+Text Label 3100 4050 2    60   ~ 0
+ACC_INT1
+$EndSCHEMATC

TS100/KiCad/TS100.pro

@@ -0,0 +1,63 @@
+update=18/05/2017 9:29:06 PM
+version=1
+last_client=kicad
+[pcbnew]
+version=1
+LastNetListRead=
+UseCmpFile=1
+PadDrill=0.600000000000
+PadDrillOvalY=0.600000000000
+PadSizeH=1.500000000000
+PadSizeV=1.500000000000
+PcbTextSizeV=1.500000000000
+PcbTextSizeH=1.500000000000
+PcbTextThickness=0.300000000000
+ModuleTextSizeV=1.000000000000
+ModuleTextSizeH=1.000000000000
+ModuleTextSizeThickness=0.150000000000
+SolderMaskClearance=0.000000000000
+SolderMaskMinWidth=0.000000000000
+DrawSegmentWidth=0.200000000000
+BoardOutlineThickness=0.100000000000
+ModuleOutlineThickness=0.150000000000
+[cvpcb]
+version=1
+NetIExt=net
+[general]
+version=1
+[eeschema]
+version=1
+LibDir=
+[eeschema/libraries]
+LibName1=power
+LibName2=device
+LibName3=transistors
+LibName4=conn
+LibName5=linear
+LibName6=regul
+LibName7=74xx
+LibName8=cmos4000
+LibName9=adc-dac
+LibName10=memory
+LibName11=xilinx
+LibName12=microcontrollers
+LibName13=dsp
+LibName14=microchip
+LibName15=analog_switches
+LibName16=motorola
+LibName17=texas
+LibName18=intel
+LibName19=audio
+LibName20=interface
+LibName21=digital-audio
+LibName22=philips
+LibName23=display
+LibName24=cypress
+LibName25=siliconi
+LibName26=opto
+LibName27=atmel
+LibName28=contrib
+LibName29=valves
+LibName30=stm32
+LibName31=mma8652fc
+LibName32=switches

TS100/KiCad/TS100.sch

@@ -0,0 +1,151 @@
+EESchema Schematic File Version 2
+LIBS:power
+LIBS:device
+LIBS:transistors
+LIBS:conn
+LIBS:linear
+LIBS:regul
+LIBS:74xx
+LIBS:cmos4000
+LIBS:adc-dac
+LIBS:memory
+LIBS:xilinx
+LIBS:microcontrollers
+LIBS:dsp
+LIBS:microchip
+LIBS:analog_switches
+LIBS:motorola
+LIBS:texas
+LIBS:intel
+LIBS:audio
+LIBS:interface
+LIBS:digital-audio
+LIBS:philips
+LIBS:display
+LIBS:cypress
+LIBS:siliconi
+LIBS:opto
+LIBS:atmel
+LIBS:contrib
+LIBS:valves
+LIBS:stm32
+LIBS:mma8652fc
+LIBS:switches
+LIBS:TS100-cache
+EELAYER 25 0
+EELAYER END
+$Descr A4 11693 8268
+encoding utf-8
+Sheet 1 2
+Title "TS100 Soldering Iron Schematic"
+Date "2017-05-18"
+Rev "2.46"
+Comp ""
+Comment1 ""
+Comment2 ""
+Comment3 "Converted by Ben V. Brown"
+Comment4 "KiCad port of published schematic"
+$EndDescr
+$Sheet
+S 1450 1000 1450 1850
+U 591D5966
+F0 "STM32 & Accel Sub Board" 60
+F1 "MCU_SubBoard.sch" 60
+F2 "SWDIO" I R 2900 1100 60 
+F3 "SWCLK" I R 2900 1200 60 
+F4 "USB_D-" I R 2900 1350 60 
+F5 "USB_D+" I R 2900 1450 60 
+F6 "K1" I R 2900 1650 60 
+F7 "nCR" I R 2900 2150 60 
+F8 "TMP36" I R 2900 2250 60 
+F9 "K2" I R 2900 1750 60 
+F10 "SCL" I R 2900 2550 60 
+F11 "SDA" I R 2900 2650 60 
+F12 "Po" I R 2900 2050 60 
+F13 "Vb" I R 2900 1950 60 
+$EndSheet
+$Comp
+L BARREL_JACK J101
+U 1 1 591D8B75
+P 1600 3600
+F 0 "J101" H 1600 3795 50  0000 C CNN
+F 1 "BARREL_JACK" H 1600 3445 50  0000 C CNN
+F 2 "" H 1600 3600 50  0001 C CNN
+F 3 "" H 1600 3600 50  0001 C CNN
+	1    1600 3600
+	1    0    0    -1  
+$EndComp
+Text Label 1900 3500 0    60   ~ 0
+VIN
+$Comp
+L GND #PWR103
+U 1 1 591D8F24
+P 2000 3800
+F 0 "#PWR103" H 2000 3550 50  0001 C CNN
+F 1 "GND" H 2000 3650 50  0000 C CNN
+F 2 "" H 2000 3800 50  0001 C CNN
+F 3 "" H 2000 3800 50  0001 C CNN
+	1    2000 3800
+	1    0    0    -1  
+$EndComp
+Wire Wire Line
+	1900 3600 2000 3600
+Wire Wire Line
+	2000 3600 2000 3800
+Wire Wire Line
+	1900 3700 2000 3700
+Connection ~ 2000 3700
+$Comp
+L SW_Push SW1
+U 1 1 591D9BC6
+P 1400 4550
+F 0 "SW1" H 1450 4650 50  0000 L CNN
+F 1 "SW_Push" H 1400 4490 50  0000 C CNN
+F 2 "" H 1400 4750 50  0001 C CNN
+F 3 "" H 1400 4750 50  0001 C CNN
+F 4 "-" H 1400 4550 60  0001 C CNN "bom_partno"
+	1    1400 4550
+	0    1    1    0   
+$EndComp
+$Comp
+L SW_Push SW101
+U 1 1 591DA371
+P 1700 4550
+F 0 "SW101" H 1750 4650 50  0000 L CNN
+F 1 "SW_Push" H 1700 4490 50  0000 C CNN
+F 2 "" H 1700 4750 50  0001 C CNN
+F 3 "" H 1700 4750 50  0001 C CNN
+	1    1700 4550
+	0    1    1    0   
+$EndComp
+$Comp
+L GND #PWR102
+U 1 1 591DA3DA
+P 1700 4750
+F 0 "#PWR102" H 1700 4500 50  0001 C CNN
+F 1 "GND" H 1700 4600 50  0000 C CNN
+F 2 "" H 1700 4750 50  0001 C CNN
+F 3 "" H 1700 4750 50  0001 C CNN
+	1    1700 4750
+	1    0    0    -1  
+$EndComp
+$Comp
+L GND #PWR101
+U 1 1 591DA436
+P 1400 4750
+F 0 "#PWR101" H 1400 4500 50  0001 C CNN
+F 1 "GND" H 1400 4600 50  0000 C CNN
+F 2 "" H 1400 4750 50  0001 C CNN
+F 3 "" H 1400 4750 50  0001 C CNN
+	1    1400 4750
+	1    0    0    -1  
+$EndComp
+Text Label 1400 4350 0    60   ~ 0
+K1
+Text Label 1700 4350 0    60   ~ 0
+K2
+Text Label 2900 1750 0    60   ~ 0
+K2
+Text Label 2900 1650 0    60   ~ 0
+K1
+$EndSCHEMATC

workspace/ts100/inc/Interrupt.h

@@ -26,9 +26,9 @@ inline void resetLastButtonPress() {
 
 }
 inline void resetButtons() {
-	lastKeyPress = millis();
 	keyState = 0;
 }
+
 inline uint32_t getLastMovement() {
 	return lastMovement;
 }
@@ -39,7 +39,10 @@ inline uint16_t getButtons() {
 inline uint16_t getRawButtons() {
 	return rawKeys;
 }
-
+inline void restoreButtons()
+{
+	keyState=getRawButtons();
+}
 
 /*IRQ prototypes*/
 void NMI_Handler(void);

workspace/ts100/inc/Modes.h

@@ -29,7 +29,7 @@ enum {
 	TEMPCAL,		//Cal tip temp offset
 
 } operatingMode;
-#define SETTINGSOPTIONSCOUNT 11 /*Number of settings in the settings menu*/
+#define SETTINGSOPTIONSCOUNT 10 /*Number of settings in the settings menu*/
 
 enum {
 	UVCO = 0,

workspace/ts100/src/MMA8652FC.c

@@ -34,13 +34,13 @@ void StartUp_Accelerometer(uint8_t sensitivity) {
 	I2C_RegisterWrite( CTRL_REG2, 0x40);	// Reset all registers to POR values
 	delayMs(2);		// ~1ms delay
 	I2C_RegisterWrite(FF_MT_CFG_REG, 0x78);	// Enable motion detection for X and Y axis, latch enabled
-	uint8_t sens = 9*7+1;
+	uint8_t sens = 9 * 7 + 5;
 	sens -= 7 * sensitivity;
 
-	I2C_RegisterWrite(FF_MT_THS_REG, sens);		// Set threshold
-	I2C_RegisterWrite(FF_MT_COUNT_REG, 0x01);	// Set debounce to 100ms
+	I2C_RegisterWrite(FF_MT_THS_REG, 0x80 | sens);		// Set threshold
+	I2C_RegisterWrite(FF_MT_COUNT_REG, 0x02);	// Set debounce to 100ms
 
 	I2C_RegisterWrite( CTRL_REG4, 0x04);		// Enable motion interrupt
 	I2C_RegisterWrite( CTRL_REG5, 0x04);// Route motion interrupts to INT1 ->PB5 ->EXTI5
-	I2C_RegisterWrite( CTRL_REG1, 0x19);		// ODR=100 Hz, Active mode
+	I2C_RegisterWrite( CTRL_REG1, 0x11);		// ODR=800 Hz, Active mode
 }

workspace/ts100/src/Main.c

@@ -18,6 +18,10 @@ int main(void) {
 		ProcessUI();
 		DrawUI();
 		delayMs(50); //Slow the system down a little bit
+		if(GPIO_ReadInputDataBit(GPIOB,GPIO_Pin_5)==Bit_RESET)
+		{
+			lastMovement = millis();
+		}
 	}
 }
 void setup() {
@@ -37,7 +41,7 @@ void setup() {
 	readIronTemp(systemSettings.tempCalibration, 0,0); 	//load the default calibration value
 	Init_Oled(systemSettings.flipDisplay); 				//Init the OLED display
 
-	OLED_DrawString("VER 1.12", 8); 					//Version Number
+	OLED_DrawString("VER 1.13", 8); 					//Version Number
 	delayMs(500);										//Pause to show version number
 	Start_Watchdog(1000); 								//start the system watch dog as 1 second timeout
 }

workspace/ts100/src/Modes.c

@@ -22,13 +22,14 @@ uint32_t temporaryTempStorage = 0;
 void ProcessUI() {
 	uint8_t Buttons = getButtons(); //read the buttons status
 	static uint32_t lastModeChange = 0;
-	if (millis() - getLastButtonPress() < 30)
+	if (getRawButtons() && ((millis() - getLastButtonPress()) > 1000)) {
+		lastKeyPress = millis() - 600;
+		Buttons = getRawButtons();
+	} else if (millis() - getLastButtonPress() < 80) {
 		Buttons = 0;
-	else if (Buttons != 0) {
-		resetLastButtonPress();
+	} else if (Buttons != 0) {
 		resetButtons();
 	}
-	//rough prevention for de-bouncing and allocates settling time
 
 	switch (operatingMode) {
 	case STARTUP:
@@ -131,7 +132,7 @@ void ProcessUI() {
 			//The user pressed the button to breakout of the settings help prompt
 			StatusFlags = 0;
 		} else {
-			if (Buttons & BUT_A) {
+			if (Buttons & BUT_B) {
 				//A key iterates through the menu
 				if (settingsPage == SETTINGSOPTIONSCOUNT) {
 					//Roll off the end
@@ -141,7 +142,7 @@ void ProcessUI() {
 				} else {
 					++settingsPage;					//move to the next option
 				}
-			} else if (Buttons & BUT_B) {
+			} else if (Buttons & BUT_A) {
 				//B changes the value selected
 				switch (settingsPage) {
 				case UVCO: