8 Commits

Author	SHA1	Message	Date
Ben V. Brown	a0a779faba	Custom tip type selection (#1977) ... * Minor doc updates * pydoc * Draft tip selection menu * Start linking in manual tip resistance * Enable on Pinecilv1 / TS10x * Fixup drawing tip type * Update Settings.cpp * Rename JBC type * Add translations * Handle one tip type * Refactor header includes * Fixup translation_IT.json * Fixing up includes * Format * Apply suggestions from code review Co-authored-by: discip <53649486+discip@users.noreply.github.com> * Update Documentation/Hardware.md Co-authored-by: discip <53649486+discip@users.noreply.github.com> --------- Co-authored-by: = <=> Co-authored-by: discip <53649486+discip@users.noreply.github.com>	2024-11-01 12:20:33 +11:00
Ivan Zorin	c19e882338	Add enum for USB PD modes (#1943) ... * Add enum for USB PD modes * Update comments for clarification according to code review	2024-07-09 19:20:02 +10:00
Ben V. Brown	442dbd982e	Expand USB-PD mode option (#1917) ... * Use PDMode to decide if we do resistance pad * Rename PDVpdo to USBPDMode * Add options for PD Mode * OLED: Allow soft line-wrap x position * Add new translation option for menu settings values * Use new setting value for PD Mode * Update translations for new menu setting * Fixup! S60 * black python	2024-06-01 16:36:34 +10:00
Ben V. Brown	286afad919	S60 Support (#1692) ... * Mock S60 * cleanup * Start refactor of OLED init * Setup timers roughly * Set Vector table offset correctly Update system_stm32f1xx.c * Update OLED.cpp * Update stm32f1xx_hal_msp.c * Update configuration.h * I2C init before GPIO From Errata Update stm32f1xx_hal_msp.c Update Software_I2C.h Allow no hardware I2C * I2C BB run bus unlock at init * cleanups * Software I2C for now * Mildly more graceful Interpolate * Handle is powered by DC Update Power.cpp Update drawPowerSourceIcon.cpp Update configuration.h Update Setup.cpp * Cleanup HomeScreen * Segment remap oled at init * Cleanup * Update MOVThread.cpp * Fix PWM Init * Fix adc2 trigger * Update configs * Fixup warning * Saner default config * Update ThermoModel.cpp * Util for current@voltage * Hub238 warning * Add hub238 handling in power mode * Update USBPDDebug_FUSB.cpp * HUSB238 debug * Hook PSU Limit * Use wrapping section of GRAM for scroll Update OLED.hpp * Update NTC table * Fix HUB voltage picker * Cleanup * Larger tip filter * Calibrate in a bunch closer Update ThermoModel.cpp * Update configuration.h * Update HUB238.cpp * Update configuration.h * Movement Pin * Update BSP.cpp * tim2 irq * Rough timer conversion (adc broken) but movement working * Fix tim2 start * Faster base PWM * Ensure utils grabs config * Add wattage limiter tolerance for device * Speed up PWM and enable PWM current limiting * tune for 12v * Prevent start until PD done * Update configuration.h * Add HUB238 check for have re-negotiated * Adjust timer to avoid noise when its possible	2023-06-03 20:05:31 +10:00
Ben V. Brown	1fbcdcdf98	Pinecil V2 (#1341) ... * Add SDK * fork * massaging makefile * Drop git module * Bring in sdk as its broken Far, Far to much crap to fix with regex now * Remove bl706 * rf_para_flash_t is missing defs * Remove crapton of junk * Remove yet more * Poking I2C * Update peripheral_config.h * Update pinmux_config.h * Update preRTOS.cpp * Update main.hpp * Setup template * Verbose boot * I2C ish * Update I2C_Wrapper.cpp * Update main.cpp * Turn off I2C reading for now * Display running * Roughing out scheduling timer0 * Starting ADC setup * Working scheduling of ADC 🎉 * Format adc headers * Update IRQ.cpp * Buttons working * Slow down I2C * Poking IRQ * Larger stack required * Accel on * Trying to chase down why __libc_init_array isnt working yet * Working c++ * Cleanup * Bump stacks * I2C wake part workaround * Cleanup * Working PWM init * qc draft * Hookup PWM * Stable enough ADC * ADC timing faster + timer without HAL * Silence * Remove boot banner * Tuning in ADC * Wake PID after ADC * Remove unused hal * Draft flash settings * Working settings save & restore * Update to prod model * Cleanup * NTC thermistor * Correct adc gain * Rough tip resistance progress * Scratch out resistance awareness of the tip * better adc settings * Tweaking ADC * ADC tweaking * Make adc range scalable * Update Dockerfile * Update configuration.h * Can read same ADC twice in a row * ADC Setup * Update PIDThread.cpp * Lesser adc backoff * Update USBPD.h * Add device ID * Update BSP_Power.h * Update BSP.cpp * DrawHex dynamicLength * Shorter ID padding * Show validation code * tip measurement * Create access for w0w1 * Expose w0 w1 * Enable debug * crc32 * Device validation * wip starting epr * Logic refactor * Safer PWM Init * PD cleanups * Update bl702_pwm.c * Update power.cpp * Update usb-pd * io * EPR decode * Better gui for showing pd specs * Rough handler for capabilities * EPR * Fix > 25V input * Perform pow step after PPS * Update BSP.cpp * Fix timer output * QC3 * Add tip resistance view * Hold PD negotiation until detection is done for tip res * Get Thermal mass * Tip res =0 protection * Update PIDThread.cpp * Update GUIThread.cpp * Rewrite tip resistance measurement * Update GUIThread.cpp * Fix fallback * Far better tip resistance measurement * Fix QC 0.6V D- * Convert the interpolator to int32 * Correct the NTC lookup * Update BSP.cpp * Update Setup.cpp * . Update configuration #defines More backported functions * Update usb-pd * More missed updates * Refactor BSP Magic BSP -> PinecilV2 Pine64 BSP -> Pinecil Update Makefile * Add Pinecilv2 to CI * Pinecil v2 multi-lang Update push.yml * Update HallSensor.md * Update README.md * Fix wrong prestartcheck default * Fix logo mapping * Update Makefile * Remove unused font block * Style * Style * Remove unused timer funcs * More culling TS80P * Revert "More culling TS80P" This reverts commit 2078b89be7. * Revert "Remove unused timer funcs" This reverts commit 0c693a89cc. * Make VBus check maskable * Remove DMA half transfer * Drop using brightness and invert icons and go back to text Saves flash space * Refactor settings UI drawing descriptions * Shorten setting function names * Store bin file assets * Fix MHP prestart	2022-08-19 15:39:37 +10:00
Ben V. Brown	56a885ed42	Style	2021-04-28 21:08:42 +10:00
Ben V. Brown	b06c58bb81	Fix utils length calc	2021-04-28 21:05:49 +10:00
Ben V. Brown	3d5b189bfd	Extracting Utils class	2021-04-28 20:57:43 +10:00