Ivan Zorin
|
a1b9e40f67
|
Show power source type on detailed screen in soldering mode (#1708) (#1709)
* Show power source type on detailed screen in soldering mode (#1708)
* Update according to code review
|
2023-06-18 21:38:26 +10:00 |
|
Ben V. Brown
|
286afad919
|
S60 Support (#1692)
* Mock S60
* cleanup
* Start refactor of OLED init
* Setup timers roughly
* Set Vector table offset correctly
Update system_stm32f1xx.c
* Update OLED.cpp
* Update stm32f1xx_hal_msp.c
* Update configuration.h
* I2C init before GPIO
From Errata
Update stm32f1xx_hal_msp.c
Update Software_I2C.h
Allow no hardware I2C
* I2C BB run bus unlock at init
* cleanups
* Software I2C for now
* Mildly more graceful Interpolate
* Handle is powered by DC
Update Power.cpp
Update drawPowerSourceIcon.cpp
Update configuration.h
Update Setup.cpp
* Cleanup HomeScreen
* Segment remap oled at init
* Cleanup
* Update MOVThread.cpp
* Fix PWM Init
* Fix adc2 trigger
* Update configs
* Fixup warning
* Saner default config
* Update ThermoModel.cpp
* Util for current@voltage
* Hub238 warning
* Add hub238 handling in power mode
* Update USBPDDebug_FUSB.cpp
* HUSB238 debug
* Hook PSU Limit
* Use wrapping section of GRAM for scroll
Update OLED.hpp
* Update NTC table
* Fix HUB voltage picker
* Cleanup
* Larger tip filter
* Calibrate in a bunch closer
Update ThermoModel.cpp
* Update configuration.h
* Update HUB238.cpp
* Update configuration.h
* Movement Pin
* Update BSP.cpp
* tim2 irq
* Rough timer conversion (adc broken) but movement working
* Fix tim2 start
* Faster base PWM
* Ensure utils grabs config
* Add wattage limiter tolerance for device
* Speed up PWM and enable PWM current limiting
* tune for 12v
* Prevent start until PD done
* Update configuration.h
* Add HUB238 check for have re-negotiated
* Adjust timer to avoid noise when its possible
|
2023-06-03 20:05:31 +10:00 |
|
Laura Klünder
|
f1879353b8
|
put soldering profile mode into its own file, put common functions in utils
|
2023-04-25 11:56:41 +02:00 |
|
Ben V. Brown
|
fdc31467aa
|
Use size encoded symbols
Update make_translation.py
|
2022-12-05 22:26:03 +11:00 |
|
Ben V. Brown
|
6cbb01db41
|
References
|
2022-11-22 18:26:16 +11:00 |
|
Ben V. Brown
|
27297fd692
|
Headers
|
2022-11-22 18:26:07 +11:00 |
|
Ben V. Brown
|
fe77fb097e
|
Update printSleepCountdown.cpp
|
2022-11-22 18:25:58 +11:00 |
|
Ben V. Brown
|
124c3ecade
|
Update shouldDeviceSleep.cpp
|
2022-11-22 18:25:57 +11:00 |
|
Ben V. Brown
|
da6b780941
|
Create shouldDeviceShutdown.cpp
|
2022-11-22 18:25:55 +11:00 |
|
Ben V. Brown
|
8d9e90c7b0
|
Create ShowWarning.cpp
|
2022-11-22 18:25:48 +11:00 |
|
Ben V. Brown
|
68eeb1276f
|
Create PrintVoltage.cpp
|
2022-11-22 18:25:45 +11:00 |
|
Ben V. Brown
|
4cb74bddd7
|
Create min.cpp
|
2022-11-22 18:25:43 +11:00 |
|
Ben V. Brown
|
7bb41ff7c9
|
Create GUIDelay.cpp
|
2022-11-22 18:25:40 +11:00 |
|
Ben V. Brown
|
3836915b19
|
Create DrawTipTemperature.cpp
|
2022-11-22 18:25:38 +11:00 |
|
Ben V. Brown
|
3f8004e81c
|
Create checkUndervoltage.cpp
|
2022-11-22 18:07:34 +11:00 |
|
Ben V. Brown
|
d2dbeee658
|
Create drawPowerSourceIcon.cpp
|
2022-11-22 18:07:32 +11:00 |
|
Ben V. Brown
|
250e26e2d2
|
Create getSleepTimeout.cpp
|
2022-11-22 18:07:30 +11:00 |
|
Ben V. Brown
|
d46bdcbfcc
|
Create OperatingModeUtilities.h
|
2022-11-22 18:07:27 +11:00 |
|
Ben V. Brown
|
db57a51cbb
|
Create printSleepCountdown.cpp
|
2022-11-22 18:07:23 +11:00 |
|
Ben V. Brown
|
8c058df6ac
|
Create shouldDeviceSleep.cpp
|
2022-11-22 18:07:16 +11:00 |
|