10 Commits

Author	SHA1	Message	Date
Ben V. Brown	a0a779faba	Custom tip type selection (#1977) ... * Minor doc updates * pydoc * Draft tip selection menu * Start linking in manual tip resistance * Enable on Pinecilv1 / TS10x * Fixup drawing tip type * Update Settings.cpp * Rename JBC type * Add translations * Handle one tip type * Refactor header includes * Fixup translation_IT.json * Fixing up includes * Format * Apply suggestions from code review Co-authored-by: discip <53649486+discip@users.noreply.github.com> * Update Documentation/Hardware.md Co-authored-by: discip <53649486+discip@users.noreply.github.com> --------- Co-authored-by: = <=> Co-authored-by: discip <53649486+discip@users.noreply.github.com>	2024-11-01 12:20:33 +11:00
Ben V. Brown	c308fe8cc2	Pinecil v2 tune via PID (#1827) ... * Start PWM after adc irq fully done * Filter len 4 * Use comparitor 2 on timer for wrap around * Update IRQ.cpp * Tip measurements are uint16_t Update BSP.cpp Update BSP.cpp * WiP PID move pid tuning to config Update PIDThread.cpp * Handle PWM Timer gitchy comparitor * Tuning * Dampen with Kd * Cleaning up * Use TemperatureType_t for getTipTemp() * Add small rolling average to user GUI temp to reduce flicker * Trigger PID when adc is skipped (will use old values)	2023-10-21 08:21:08 +11:00
Ben V. Brown	c120af398a	Merge branch 'dev' into Short-Detection	2023-08-02 15:52:49 +10:00
Ben V. Brown	80c4b58976	Abstract out showing bootlogo ... To improve support on PinecilV2	2023-08-01 21:18:27 +10:00
Ben V. Brown	344068d480	Add isTipShorted() to warnings	2023-07-28 19:59:54 +10:00
Ben V. Brown	e7bcf920ba	Refactor PinecilV2 Tuning ... Closes #1688	2023-06-04 12:13:26 +10:00
Laura Klünder	f1879353b8	put soldering profile mode into its own file, put common functions in utils	2023-04-25 11:56:41 +02:00
Laura Klünder	cb2e8af700	full profile support	2023-04-23 23:48:24 +02:00
Ben V. Brown	706b3246a1	Test better reboots	2023-01-03 18:46:26 +11:00
Ben V. Brown	1fbcdcdf98	Pinecil V2 (#1341) ... * Add SDK * fork * massaging makefile * Drop git module * Bring in sdk as its broken Far, Far to much crap to fix with regex now * Remove bl706 * rf_para_flash_t is missing defs * Remove crapton of junk * Remove yet more * Poking I2C * Update peripheral_config.h * Update pinmux_config.h * Update preRTOS.cpp * Update main.hpp * Setup template * Verbose boot * I2C ish * Update I2C_Wrapper.cpp * Update main.cpp * Turn off I2C reading for now * Display running * Roughing out scheduling timer0 * Starting ADC setup * Working scheduling of ADC 🎉 * Format adc headers * Update IRQ.cpp * Buttons working * Slow down I2C * Poking IRQ * Larger stack required * Accel on * Trying to chase down why __libc_init_array isnt working yet * Working c++ * Cleanup * Bump stacks * I2C wake part workaround * Cleanup * Working PWM init * qc draft * Hookup PWM * Stable enough ADC * ADC timing faster + timer without HAL * Silence * Remove boot banner * Tuning in ADC * Wake PID after ADC * Remove unused hal * Draft flash settings * Working settings save & restore * Update to prod model * Cleanup * NTC thermistor * Correct adc gain * Rough tip resistance progress * Scratch out resistance awareness of the tip * better adc settings * Tweaking ADC * ADC tweaking * Make adc range scalable * Update Dockerfile * Update configuration.h * Can read same ADC twice in a row * ADC Setup * Update PIDThread.cpp * Lesser adc backoff * Update USBPD.h * Add device ID * Update BSP_Power.h * Update BSP.cpp * DrawHex dynamicLength * Shorter ID padding * Show validation code * tip measurement * Create access for w0w1 * Expose w0 w1 * Enable debug * crc32 * Device validation * wip starting epr * Logic refactor * Safer PWM Init * PD cleanups * Update bl702_pwm.c * Update power.cpp * Update usb-pd * io * EPR decode * Better gui for showing pd specs * Rough handler for capabilities * EPR * Fix > 25V input * Perform pow step after PPS * Update BSP.cpp * Fix timer output * QC3 * Add tip resistance view * Hold PD negotiation until detection is done for tip res * Get Thermal mass * Tip res =0 protection * Update PIDThread.cpp * Update GUIThread.cpp * Rewrite tip resistance measurement * Update GUIThread.cpp * Fix fallback * Far better tip resistance measurement * Fix QC 0.6V D- * Convert the interpolator to int32 * Correct the NTC lookup * Update BSP.cpp * Update Setup.cpp * . Update configuration #defines More backported functions * Update usb-pd * More missed updates * Refactor BSP Magic BSP -> PinecilV2 Pine64 BSP -> Pinecil Update Makefile * Add Pinecilv2 to CI * Pinecil v2 multi-lang Update push.yml * Update HallSensor.md * Update README.md * Fix wrong prestartcheck default * Fix logo mapping * Update Makefile * Remove unused font block * Style * Style * Remove unused timer funcs * More culling TS80P * Revert "More culling TS80P" This reverts commit 2078b89be7. * Revert "Remove unused timer funcs" This reverts commit 0c693a89cc. * Make VBus check maskable * Remove DMA half transfer * Drop using brightness and invert icons and go back to text Saves flash space * Refactor settings UI drawing descriptions * Shorten setting function names * Store bin file assets * Fix MHP prestart	2022-08-19 15:39:37 +10:00