17 Commits

Author	SHA1	Message	Date
Ben V. Brown	d122a9fb52	Dont adjust pinecilv2 max temp by Coe	2025-02-22 15:19:43 +11:00
Leo	08ff68cd4f	Added guide for compiling under Windows (#2060) ... * Update documentation to build IronOS in Windows using MSYS2 environment and fix compilation on case-sensitive file systems. --------- Co-authored-by: Ivan Zorin <ivan.a.zorin@gmail.com>	2025-02-08 00:03:49 +03:00
Ben V. Brown	a0a779faba	Custom tip type selection (#1977) ... * Minor doc updates * pydoc * Draft tip selection menu * Start linking in manual tip resistance * Enable on Pinecilv1 / TS10x * Fixup drawing tip type * Update Settings.cpp * Rename JBC type * Add translations * Handle one tip type * Refactor header includes * Fixup translation_IT.json * Fixing up includes * Format * Apply suggestions from code review Co-authored-by: discip <53649486+discip@users.noreply.github.com> * Update Documentation/Hardware.md Co-authored-by: discip <53649486+discip@users.noreply.github.com> --------- Co-authored-by: = <=> Co-authored-by: discip <53649486+discip@users.noreply.github.com>	2024-11-01 12:20:33 +11:00
Ben V. Brown	14b92cde08	Pinecilv2 adc v2 (#1916) ... * Updated NTC lookup * remove float compute from adc (as we dont use it) * Updated adc settings * Updated ADC Init * Custom max temp lookup * Mask Timer around changing timer rate * Use timer channels in sane order * Update IRQ.cpp * Remove ADC dummy wait on start/stop * Dont use ADC IRQ * Disable sampling delay * Update Setup.cpp * PinecilV2 disable ROM driver utils Always use our source * Force settings upgrade on PinecilV2 Fix forced settings upgrade on Pinecilv2 * Prevent ADC rollover * Update Setup.cpp * ADC cleanup * Rollover prevention * Measure tip temperature 2nd * Rebase Buffalo SDK to 1.4.5 (#1923) * Update bl702_adc.c * Update board.c * . * Update bl702_adc.c * Import updated hal_drv * Remove accidental dupe of stack in linker * First pass update BLE stack * Update ReleaseNotes * Update push.yml * Drop BT Audio which we dont use * . * Reformat * Update conn.c * Update hog.c	2024-06-08 14:33:06 +10:00
Ben V. Brown	b5fc1b5891	4 ohm tip (#1868) ... * Add 4 ohm PTS200 tip for PinecilV2 * Add PTS200 4 ohm tip to TS101 * Update BSP.cpp	2024-03-22 10:03:46 +11:00
Ben V. Brown	c308fe8cc2	Pinecil v2 tune via PID (#1827) ... * Start PWM after adc irq fully done * Filter len 4 * Use comparitor 2 on timer for wrap around * Update IRQ.cpp * Tip measurements are uint16_t Update BSP.cpp Update BSP.cpp * WiP PID move pid tuning to config Update PIDThread.cpp * Handle PWM Timer gitchy comparitor * Tuning * Dampen with Kd * Cleaning up * Use TemperatureType_t for getTipTemp() * Add small rolling average to user GUI temp to reduce flicker * Trigger PID when adc is skipped (will use old values)	2023-10-21 08:21:08 +11:00
Ben V. Brown	c0a5e244b9	Temperature code updates (#1814) ... * Create a typedef for temperatures * Quick parse replace temp types * Fixup for fast/slow PWM on PinecilV2 * Update PIDThread.cpp * Pinecil small tips need less smoothing * Remove incorrect comment * Remove unused function * Update PinecilV2 Tune as well	2023-09-22 10:19:50 +10:00
Ben V. Brown	c120af398a	Merge branch 'dev' into Short-Detection	2023-08-02 15:52:49 +10:00
Ben V. Brown	80c4b58976	Abstract out showing bootlogo ... To improve support on PinecilV2	2023-08-01 21:18:27 +10:00
Ben V. Brown	344068d480	Add isTipShorted() to warnings	2023-07-28 19:59:54 +10:00
alextrical	f81257562d	Tip short detection at boot ... If tip is shorted at boot, prevent the FW from running, with the intent to prevent the MOSFET from being damaged	2023-06-30 15:57:11 +01:00
Ben V. Brown	e7bcf920ba	Refactor PinecilV2 Tuning ... Closes #1688	2023-06-04 12:13:26 +10:00
Laura Klünder	f1879353b8	put soldering profile mode into its own file, put common functions in utils	2023-04-25 11:56:41 +02:00
Laura Klünder	cb2e8af700	full profile support	2023-04-23 23:48:24 +02:00
Ben V. Brown	706b3246a1	Test better reboots	2023-01-03 18:46:26 +11:00
Ben V. Brown	4d83f4febc	Change 6.2/8 ohm threshold to 4000	2022-09-25 11:11:47 +10:00
Ben V. Brown	1fbcdcdf98	Pinecil V2 (#1341) ... * Add SDK * fork * massaging makefile * Drop git module * Bring in sdk as its broken Far, Far to much crap to fix with regex now * Remove bl706 * rf_para_flash_t is missing defs * Remove crapton of junk * Remove yet more * Poking I2C * Update peripheral_config.h * Update pinmux_config.h * Update preRTOS.cpp * Update main.hpp * Setup template * Verbose boot * I2C ish * Update I2C_Wrapper.cpp * Update main.cpp * Turn off I2C reading for now * Display running * Roughing out scheduling timer0 * Starting ADC setup * Working scheduling of ADC 🎉 * Format adc headers * Update IRQ.cpp * Buttons working * Slow down I2C * Poking IRQ * Larger stack required * Accel on * Trying to chase down why __libc_init_array isnt working yet * Working c++ * Cleanup * Bump stacks * I2C wake part workaround * Cleanup * Working PWM init * qc draft * Hookup PWM * Stable enough ADC * ADC timing faster + timer without HAL * Silence * Remove boot banner * Tuning in ADC * Wake PID after ADC * Remove unused hal * Draft flash settings * Working settings save & restore * Update to prod model * Cleanup * NTC thermistor * Correct adc gain * Rough tip resistance progress * Scratch out resistance awareness of the tip * better adc settings * Tweaking ADC * ADC tweaking * Make adc range scalable * Update Dockerfile * Update configuration.h * Can read same ADC twice in a row * ADC Setup * Update PIDThread.cpp * Lesser adc backoff * Update USBPD.h * Add device ID * Update BSP_Power.h * Update BSP.cpp * DrawHex dynamicLength * Shorter ID padding * Show validation code * tip measurement * Create access for w0w1 * Expose w0 w1 * Enable debug * crc32 * Device validation * wip starting epr * Logic refactor * Safer PWM Init * PD cleanups * Update bl702_pwm.c * Update power.cpp * Update usb-pd * io * EPR decode * Better gui for showing pd specs * Rough handler for capabilities * EPR * Fix > 25V input * Perform pow step after PPS * Update BSP.cpp * Fix timer output * QC3 * Add tip resistance view * Hold PD negotiation until detection is done for tip res * Get Thermal mass * Tip res =0 protection * Update PIDThread.cpp * Update GUIThread.cpp * Rewrite tip resistance measurement * Update GUIThread.cpp * Fix fallback * Far better tip resistance measurement * Fix QC 0.6V D- * Convert the interpolator to int32 * Correct the NTC lookup * Update BSP.cpp * Update Setup.cpp * . Update configuration #defines More backported functions * Update usb-pd * More missed updates * Refactor BSP Magic BSP -> PinecilV2 Pine64 BSP -> Pinecil Update Makefile * Add Pinecilv2 to CI * Pinecil v2 multi-lang Update push.yml * Update HallSensor.md * Update README.md * Fix wrong prestartcheck default * Fix logo mapping * Update Makefile * Remove unused font block * Style * Style * Remove unused timer funcs * More culling TS80P * Revert "More culling TS80P" This reverts commit 2078b89be7. * Revert "Remove unused timer funcs" This reverts commit 0c693a89cc. * Make VBus check maskable * Remove DMA half transfer * Drop using brightness and invert icons and go back to text Saves flash space * Refactor settings UI drawing descriptions * Shorten setting function names * Store bin file assets * Fix MHP prestart	2022-08-19 15:39:37 +10:00