From fa3443dafb32399cfae58d0c68701be6bba1e050 Mon Sep 17 00:00:00 2001
From: Derek Chauran <17055079+dchauran@users.noreply.github.com>
Date: Mon, 28 Feb 2022 19:04:22 -0800
Subject: [PATCH] Update pinecil flashing instructions

The PINE64 Updater tool does support the latest releases. I almost did not try it because of the statement in this doc, but it flashed 2.17 to my pinecil just fine.
---
 Documentation/Flashing.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/Flashing.md b/Documentation/Flashing.md
index 537b8cda..86d8efe6 100644
--- a/Documentation/Flashing.md
+++ b/Documentation/Flashing.md
@@ -90,7 +90,7 @@ Check the extension of your firmware, it should be `.RDY` now.
 
 The MCU used in the Pinecil supports usb-dfu.
 
-There is the nice gui [Pinecil Firmware Updater](https://github.com/pine64/pinecil-firmware-updater/releases). However this currently does not support the latest releases.
+There is the nice gui [Pinecil Firmware Updater](https://github.com/pine64/pinecil-firmware-updater/releases). In the event that this tool is unavailable or otherwise does not meet your needs, the below process may be used to update the firmware.
 
 To enter DFU mode, hold the button at the back of the iron while connecting to usb over usb-c.
 Generally all usb controllers work, but some hubs have issues so avoiding hubs may be best.