diff --git a/workspace/TS100/Core/BSP/BSP.h b/workspace/TS100/Core/BSP/BSP.h
index 19e8b15d..c4fdb144 100644
--- a/workspace/TS100/Core/BSP/BSP.h
+++ b/workspace/TS100/Core/BSP/BSP.h
@@ -2,7 +2,7 @@
 #include "BSP_Power.h"
 #include "BSP_QC.h"
 #include "Defines.h"
-#include "UnitSettings.h"
+#include "Model_Config.h"
 #include "stdint.h"
 /*
  * BSP.h -- Board Support
diff --git a/workspace/TS100/Core/BSP/Miniware/BSP.cpp b/workspace/TS100/Core/BSP/Miniware/BSP.cpp
index d256cdec..c48f90a5 100644
--- a/workspace/TS100/Core/BSP/Miniware/BSP.cpp
+++ b/workspace/TS100/Core/BSP/Miniware/BSP.cpp
@@ -7,6 +7,7 @@
 #include "Pins.h"
 #include "main.hpp"
 #include "history.hpp"
+#include "Model_Config.h"
 #include "I2C_Wrapper.hpp"
 volatile uint16_t PWMSafetyTimer = 0;
 volatile uint8_t pendingPWM = 0;
@@ -16,7 +17,7 @@ history<uint16_t, PID_TIM_HZ> rawTempFilter = { { 0 }, 0, 0 };
 void resetWatchdog() {
 	HAL_IWDG_Refresh(&hiwdg);
 }
-#ifdef MODEL_TS80P
+#ifdef TEMP_NTC
 //Lookup table for the NTC
 //Stored as ADCReading,Temp in degC
 static const uint16_t NTCHandleLookup[] = {
@@ -85,7 +86,7 @@ static const uint16_t NTCHandleLookup[] = {
 		};
 #endif
 uint16_t getHandleTemperature() {
-#ifdef MODEL_TS80P
+#ifdef TEMP_NTC
 	//TS80P uses 100k NTC resistors instead
 	//NTCG104EF104FT1X from TDK
 	//For now not doing interpolation
@@ -97,7 +98,8 @@ uint16_t getHandleTemperature() {
 		}
 	}
 	return 0;
-#else
+#endif
+#ifdef TEMP_TMP36
 	// We return the current handle temperature in X10 C
 	// TMP36 in handle, 0.5V offset and then 10mV per deg C (0.75V @ 25C for
 	// example) STM32 = 4096 count @ 3.3V input -> But We oversample by 32/(2^2) =
diff --git a/workspace/TS100/Core/BSP/Miniware/BSP_PD.c b/workspace/TS100/Core/BSP/Miniware/BSP_PD.c
index 031aa0f7..e2989be8 100644
--- a/workspace/TS100/Core/BSP/Miniware/BSP_PD.c
+++ b/workspace/TS100/Core/BSP/Miniware/BSP_PD.c
@@ -6,7 +6,8 @@
  */
 
 #include "BSP_PD.h"
-
+#include "Model_Config.h"
+#ifdef POW_PD
 /*
  * An array of all of the desired voltages & minimum currents in preferred order
  */
@@ -18,3 +19,4 @@ const uint16_t USB_PD_Desired_Levels[] = {
 
 		};
 const uint8_t USB_PD_Desired_Levels_Len = 3;
+#endif
diff --git a/workspace/TS100/Core/BSP/Miniware/Model_Config.h b/workspace/TS100/Core/BSP/Miniware/Model_Config.h
new file mode 100644
index 00000000..6cb69a94
--- /dev/null
+++ b/workspace/TS100/Core/BSP/Miniware/Model_Config.h
@@ -0,0 +1,44 @@
+/*
+ * Model_Config.h
+ *
+ *  Created on: 25 Jul 2020
+ *      Author: Ralim
+ */
+
+#ifndef BSP_MINIWARE_MODEL_CONFIG_H_
+#define BSP_MINIWARE_MODEL_CONFIG_H_
+/*
+ * Lookup for mapping features <-> Models
+ */
+
+#if defined(MODEL_TS100) + defined(MODEL_TS80)+defined(MODEL_TS80P) > 1
+#error "Multiple models defined!"
+#elif defined(MODEL_TS100) + defined(MODEL_TS80)+ defined(MODEL_TS80P) == 0
+#error "No model defined!"
+#endif
+
+#ifdef MODEL_TS100
+#define ACCEL_MMA
+#define ACCEL_LIS
+#define TEMP_TMP36
+#endif
+
+#ifdef MODEL_TS80
+#define ACCEL_LIS
+#define POW_QC
+#define TEMP_TMP36
+#define LIS_ORI_FLIP
+#define OLED_FLIP
+#endif
+
+#ifdef MODEL_TS80P
+#define ACCEL_LIS
+#define POW_PD
+#define POW_QC
+#define TEMP_NTC
+#define I2C_SOFT
+#define LIS_ORI_FLIP
+#define OLED_FLIP
+#endif
+
+#endif /* BSP_MINIWARE_MODEL_CONFIG_H_ */
diff --git a/workspace/TS100/Core/BSP/Miniware/Pins.h b/workspace/TS100/Core/BSP/Miniware/Pins.h
index e932d9eb..59d26a07 100644
--- a/workspace/TS100/Core/BSP/Miniware/Pins.h
+++ b/workspace/TS100/Core/BSP/Miniware/Pins.h
@@ -7,12 +7,7 @@
 
 #ifndef BSP_MINIWARE_PINS_H_
 #define BSP_MINIWARE_PINS_H_
-
-#if defined(MODEL_TS100) + defined(MODEL_TS80)+defined(MODEL_TS80P) > 1
-#error "Multiple models defined!"
-#elif defined(MODEL_TS100) + defined(MODEL_TS80)+ defined(MODEL_TS80P) == 0
-#error "No model defined!"
-#endif
+#include "Model_Config.h"
 
 #ifdef MODEL_TS100
 
diff --git a/workspace/TS100/Core/BSP/Miniware/Power.cpp b/workspace/TS100/Core/BSP/Miniware/Power.cpp
index 8340fa7f..9b989fc4 100644
--- a/workspace/TS100/Core/BSP/Miniware/Power.cpp
+++ b/workspace/TS100/Core/BSP/Miniware/Power.cpp
@@ -4,12 +4,13 @@
 #include "Settings.h"
 #include "Pins.h"
 #include "fusbpd.h"
+#include "Model_Config.h"
 #include "int_n.h"
 bool FUSB302_present = false;
 void power_probe() {
-// If TS80 probe for QC
+// If TS80(p) probe for QC
 // If TS100 - noop
-#if defined(MODEL_TS80)+defined(MODEL_TS80P)>0
+#ifdef POW_QC
 
 	startQC(systemSettings.voltageDiv);
 	seekQC((systemSettings.cutoutSetting) ? 120 : 90,
@@ -19,12 +20,12 @@ void power_probe() {
 }
 
 void power_check() {
-#if defined(MODEL_TS80)+defined(MODEL_TS80P)>0
+#ifdef POW_QC
 	QC_resync();
 #endif
 }
 uint8_t usb_pd_detect() {
-#ifdef MODEL_TS80P
+#ifdef POW_PD
 	FUSB302_present = fusb302_detect();
 
 	return FUSB302_present;
@@ -32,7 +33,7 @@ uint8_t usb_pd_detect() {
 	return false;
 }
 uint8_t pd_irq_read() {
-#ifdef MODEL_TS80P
+#ifdef POW_PD
 	return HAL_GPIO_ReadPin(INT_PD_GPIO_Port, INT_PD_Pin) == GPIO_PIN_SET ?
 			1 : 0;
 #endif
diff --git a/workspace/TS100/Core/BSP/Miniware/QC_GPIO.cpp b/workspace/TS100/Core/BSP/Miniware/QC_GPIO.cpp
index 5d5f3b10..a4bba7db 100644
--- a/workspace/TS100/Core/BSP/Miniware/QC_GPIO.cpp
+++ b/workspace/TS100/Core/BSP/Miniware/QC_GPIO.cpp
@@ -9,6 +9,8 @@
 #include "QC3.h"
 #include "Settings.h"
 #include "stm32f1xx_hal.h"
+#include "Model_Config.h"
+#ifdef POW_QC
 void QC_DPlusZero_Six() {
     HAL_GPIO_WritePin(GPIOB, GPIO_PIN_3, GPIO_PIN_RESET);  // pull down D+
 }
@@ -65,9 +67,9 @@ void QC_Post_Probe_En() {
 }
 
 uint8_t QC_DM_PulledDown() { return HAL_GPIO_ReadPin(GPIOA, GPIO_PIN_11) == GPIO_PIN_RESET ? 1 : 0; }
-
+#endif
 void QC_resync() {
-#if defined(MODEL_TS80) + defined(MODEL_TS80P) >0
+#ifdef POW_QC
     seekQC((systemSettings.cutoutSetting) ? 120 : 90,
            systemSettings.voltageDiv);  // Run the QC seek again if we have drifted too much
 #endif
diff --git a/workspace/TS100/Core/BSP/Miniware/Software_I2C.h b/workspace/TS100/Core/BSP/Miniware/Software_I2C.h
new file mode 100644
index 00000000..73242ff4
--- /dev/null
+++ b/workspace/TS100/Core/BSP/Miniware/Software_I2C.h
@@ -0,0 +1,27 @@
+/*
+ * Software_I2C.h
+ *
+ *  Created on: 25 Jul 2020
+ *      Author: Ralim
+ */
+
+#ifndef BSP_MINIWARE_SOFTWARE_I2C_H_
+#define BSP_MINIWARE_SOFTWARE_I2C_H_
+#include "Model_Config.h"
+#include "BSP.h"
+#include "stm32f1xx_hal.h"
+#ifdef I2C_SOFT
+
+#define SOFT_SCL_HIGH() 	HAL_GPIO_WritePin(SCL2_GPIO_Port, SCL2_Pin, GPIO_PIN_SET)
+#define SOFT_SCL_LOW() 	HAL_GPIO_WritePin(SCL2_GPIO_Port, SCL2_Pin, GPIO_PIN_RESET)
+#define SOFT_SDA_HIGH() 	HAL_GPIO_WritePin(SDA2_GPIO_Port, SDA2_Pin, GPIO_PIN_SET)
+#define SOFT_SDA_LOW() 	HAL_GPIO_WritePin(SDA2_GPIO_Port, SDA2_Pin, GPIO_PIN_RESET)
+#define SOFT_SDA_READ()  (HAL_GPIO_ReadPin(SDA2_GPIO_Port,SDA2_Pin)==GPIO_PIN_SET?1:0)
+#define SOFT_SCL_READ()  (HAL_GPIO_ReadPin(SCL2_GPIO_Port,SCL2_Pin)==GPIO_PIN_SET?1:0)
+#define SOFT_I2C_DELAY() {for(int xx=0;xx<100;xx++){asm("nop");}}
+
+#endif
+
+
+
+#endif /* BSP_MINIWARE_SOFTWARE_I2C_H_ */
diff --git a/workspace/TS100/Core/BSP/Miniware/UnitSettings.h b/workspace/TS100/Core/BSP/Miniware/UnitSettings.h
deleted file mode 100644
index 46a1b78c..00000000
--- a/workspace/TS100/Core/BSP/Miniware/UnitSettings.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * UnitSettings.h
- *
- *  Created on: 29 May 2020
- *      Author: Ralim
- */
-
-#ifndef BSP_MINIWARE_UNITSETTINGS_H_
-#define BSP_MINIWARE_UNITSETTINGS_H_
-//On the TS80, the LIS accel is mounted backwards
-#if defined(MODEL_TS80)+defined(MODEL_TS80P)>0
-#define LIS_ORI_FLIP
-#endif
-
-
-
-
-#endif /* BSP_MINIWARE_UNITSETTINGS_H_ */
diff --git a/workspace/TS100/Core/BSP/Miniware/fusb302b.cpp b/workspace/TS100/Core/BSP/Miniware/fusb302b.cpp
index 50cff3b0..68615bed 100644
--- a/workspace/TS100/Core/BSP/Miniware/fusb302b.cpp
+++ b/workspace/TS100/Core/BSP/Miniware/fusb302b.cpp
@@ -14,6 +14,8 @@
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
+#include "Model_Config.h"
+#ifdef POW_PD
 #include "BSP.h"
 #include "fusb302b.h"
 #include "I2CBB.hpp"
@@ -272,3 +274,9 @@ bool fusb_read_id() {
 		return false;
 	return true;
 }
+uint8_t fusb302_detect() {
+	//Probe the I2C bus for its address
+	return I2CBB::probe(FUSB302B_ADDR);
+}
+
+#endif
diff --git a/workspace/TS100/Core/BSP/Miniware/preRTOS.cpp b/workspace/TS100/Core/BSP/Miniware/preRTOS.cpp
index f342f8a7..d192e23a 100644
--- a/workspace/TS100/Core/BSP/Miniware/preRTOS.cpp
+++ b/workspace/TS100/Core/BSP/Miniware/preRTOS.cpp
@@ -11,6 +11,7 @@
 #include "Pins.h"
 #include "I2CBB.hpp"
 #include "fusbpd.h"
+#include "Model_Config.h"
 void preRToSInit() {
 	/* Reset of all peripherals, Initializes the Flash interface and the Systick.
 	 */
@@ -20,8 +21,11 @@ void preRToSInit() {
 	HAL_Delay(50);
 	HAL_GPIO_WritePin(OLED_RESET_GPIO_Port, OLED_RESET_Pin, GPIO_PIN_SET);
 	HAL_Delay(50);
-#ifdef MODEL_TS80P
+#ifdef I2C_SOFT
 	I2CBB::init();
+
+#endif
+#ifdef POW_PD
 	//Spawn all of the USB-C processors
 	fusb302_start_processing();
 #endif
diff --git a/workspace/TS100/Core/Drivers/FUSB302/fusbpd.cpp b/workspace/TS100/Core/Drivers/FUSB302/fusbpd.cpp
index 5c821515..f6bb58e1 100644
--- a/workspace/TS100/Core/Drivers/FUSB302/fusbpd.cpp
+++ b/workspace/TS100/Core/Drivers/FUSB302/fusbpd.cpp
@@ -4,8 +4,8 @@
  *  Created on: 13 Jun 2020
  *      Author: Ralim
  */
-
-#ifdef MODEL_TS80P
+#include "Model_Config.h"
+#ifdef POW_PD
 #include <fusbpd.h>
 #include <pd.h>
 #include "BSP.h"
@@ -17,10 +17,7 @@
 #include "int_n.h"
 #include "hard_reset.h"
 
-uint8_t fusb302_detect() {
-	//Probe the I2C bus for its address
-	return I2CBB::probe(FUSB302B_ADDR);
-}
+
 
 void fusb302_start_processing() {
 	/* Initialize the FUSB302B */
diff --git a/workspace/TS100/Core/BSP/Miniware/I2CBB.cpp b/workspace/TS100/Core/Drivers/I2CBB.cpp
similarity index 76%
rename from workspace/TS100/Core/BSP/Miniware/I2CBB.cpp
rename to workspace/TS100/Core/Drivers/I2CBB.cpp
index 14994c39..77410676 100644
--- a/workspace/TS100/Core/BSP/Miniware/I2CBB.cpp
+++ b/workspace/TS100/Core/Drivers/I2CBB.cpp
@@ -4,17 +4,10 @@
  *  Created on: 12 Jun 2020
  *      Author: Ralim
  */
-
-#ifdef MODEL_TS80P
+#include "Model_Config.h"
+#ifdef I2C_SOFT
 #include <I2CBB.hpp>
 #include "FreeRTOS.h"
-#define SCL_HIGH() 	HAL_GPIO_WritePin(SCL2_GPIO_Port, SCL2_Pin, GPIO_PIN_SET)
-#define SCL_LOW() 	HAL_GPIO_WritePin(SCL2_GPIO_Port, SCL2_Pin, GPIO_PIN_RESET)
-#define SDA_HIGH() 	HAL_GPIO_WritePin(SDA2_GPIO_Port, SDA2_Pin, GPIO_PIN_SET)
-#define SDA_LOW() 	HAL_GPIO_WritePin(SDA2_GPIO_Port, SDA2_Pin, GPIO_PIN_RESET)
-#define SDA_READ()  (HAL_GPIO_ReadPin(SDA2_GPIO_Port,SDA2_Pin)==GPIO_PIN_SET?1:0)
-#define SCL_READ()  (HAL_GPIO_ReadPin(SCL2_GPIO_Port,SCL2_Pin)==GPIO_PIN_SET?1:0)
-#define I2C_DELAY() {for(int xx=0;xx<100;xx++){asm("nop");}}
 SemaphoreHandle_t I2CBB::I2CSemaphore = NULL;
 StaticSemaphore_t I2CBB::xSemaphoreBuffer;
 SemaphoreHandle_t I2CBB::I2CSemaphore2 = NULL;
@@ -28,8 +21,8 @@ void I2CBB::init() {
 	GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
 	GPIO_InitStruct.Pull = GPIO_PULLUP;
 	HAL_GPIO_Init(SDA2_GPIO_Port, &GPIO_InitStruct);
-	SDA_HIGH();
-	SCL_HIGH();
+	SOFT_SDA_HIGH();
+	SOFT_SCL_HIGH();
 	I2CSemaphore = xSemaphoreCreateBinaryStatic(&xSemaphoreBuffer);
 	I2CSemaphore2 = xSemaphoreCreateBinaryStatic(&xSemaphoreBuffer2);
 	unlock();
@@ -66,8 +59,8 @@ bool I2CBB::Mem_Read(uint16_t DevAddress, uint16_t MemAddress, uint8_t *pData,
 		unlock();
 		return false;
 	}
-	SCL_LOW();
-	I2C_DELAY();
+	SOFT_SCL_LOW();
+	SOFT_I2C_DELAY();
 //	stop();
 	start();
 	ack = send(DevAddress | 1);
@@ -107,7 +100,7 @@ bool I2CBB::Mem_Write(uint16_t DevAddress, uint16_t MemAddress,
 	}
 	while (Size) {
 		resetWatchdog();
-		bool ack = send(pData[0]);
+		ack = send(pData[0]);
 		if (!ack) {
 			stop();
 			asm("bkpt");
@@ -133,7 +126,7 @@ void I2CBB::Transmit(uint16_t DevAddress, uint8_t *pData, uint16_t Size) {
 		return;
 	}
 	while (Size) {
-		bool ack = send(pData[0]);
+		ack = send(pData[0]);
 		if (!ack) {
 			stop();
 			unlock();
@@ -181,7 +174,7 @@ void I2CBB::TransmitReceive(uint16_t DevAddress, uint8_t *pData_tx,
 			return;
 		}
 		while (Size_tx) {
-			bool ack = send(pData_tx[0]);
+			ack = send(pData_tx[0]);
 			if (!ack) {
 				stop();
 				unlock();
@@ -211,24 +204,24 @@ void I2CBB::TransmitReceive(uint16_t DevAddress, uint8_t *pData_tx,
 
 void I2CBB::start() {
 	/* I2C Start condition, data line goes low when clock is high */
-	SCL_HIGH();
-	SDA_HIGH();
-	I2C_DELAY();
-	SDA_LOW();
-	I2C_DELAY();
-	SCL_LOW();
-	I2C_DELAY();
-	SDA_HIGH();
+	SOFT_SCL_HIGH();
+	SOFT_SDA_HIGH();
+	SOFT_I2C_DELAY();
+	SOFT_SDA_LOW();
+	SOFT_I2C_DELAY();
+	SOFT_SCL_LOW();
+	SOFT_I2C_DELAY();
+	SOFT_SDA_HIGH();
 }
 
 void I2CBB::stop() {
 	/* I2C Stop condition, clock goes high when data is low */
-	SDA_LOW();
-	I2C_DELAY();
-	SCL_HIGH();
-	I2C_DELAY();
-	SDA_HIGH();
-	I2C_DELAY();
+	SOFT_SDA_LOW();
+	SOFT_I2C_DELAY();
+	SOFT_SCL_HIGH();
+	SOFT_I2C_DELAY();
+	SOFT_SDA_HIGH();
+	SOFT_I2C_DELAY();
 }
 
 bool I2CBB::send(uint8_t value) {
@@ -238,7 +231,7 @@ bool I2CBB::send(uint8_t value) {
 		value <<= 1;
 	}
 
-	SDA_HIGH();
+	SOFT_SDA_HIGH();
 	bool ack = (read_bit() == 0);
 	return ack;
 }
@@ -252,7 +245,7 @@ uint8_t I2CBB::read(bool ack) {
 		B |= read_bit();
 	}
 
-	SDA_HIGH();
+	SOFT_SDA_HIGH();
 	if (ack)
 		write_bit(0);
 	else
@@ -263,17 +256,17 @@ uint8_t I2CBB::read(bool ack) {
 uint8_t I2CBB::read_bit() {
 	uint8_t b;
 
-	SDA_HIGH();
-	I2C_DELAY();
-	SCL_HIGH();
-	I2C_DELAY();
+	SOFT_SDA_HIGH();
+	SOFT_I2C_DELAY();
+	SOFT_SCL_HIGH();
+	SOFT_I2C_DELAY();
 
-	if (SDA_READ())
+	if (SOFT_SDA_READ())
 		b = 1;
 	else
 		b = 0;
 
-	SCL_LOW();
+	SOFT_SCL_LOW();
 	return b;
 }
 
@@ -294,15 +287,15 @@ bool I2CBB::lock() {
 
 void I2CBB::write_bit(uint8_t val) {
 	if (val) {
-		SDA_HIGH();
+		SOFT_SDA_HIGH();
 	} else {
-		SDA_LOW();
+		SOFT_SDA_LOW();
 	}
 
-	I2C_DELAY();
-	SCL_HIGH();
-	I2C_DELAY();
-	SCL_LOW();
+	SOFT_I2C_DELAY();
+	SOFT_SCL_HIGH();
+	SOFT_I2C_DELAY();
+	SOFT_SCL_LOW();
 }
 
 void I2CBB::unlock2() {
diff --git a/workspace/TS100/Core/BSP/Miniware/I2CBB.hpp b/workspace/TS100/Core/Drivers/I2CBB.hpp
similarity index 89%
rename from workspace/TS100/Core/BSP/Miniware/I2CBB.hpp
rename to workspace/TS100/Core/Drivers/I2CBB.hpp
index 494bfe22..6d733c90 100644
--- a/workspace/TS100/Core/BSP/Miniware/I2CBB.hpp
+++ b/workspace/TS100/Core/Drivers/I2CBB.hpp
@@ -7,17 +7,15 @@
 
 #ifndef BSP_MINIWARE_I2CBB_HPP_
 #define BSP_MINIWARE_I2CBB_HPP_
-#ifdef MODEL_TS80P
+#include "Model_Config.h"
+#ifdef I2C_SOFT
 #include "BSP.h"
 #include "Setup.h"
 #include "Pins.h"
 #include "FreeRTOS.h"
 #include "semphr.h"
-/*
- * Simple static I2C bit-bang class used on the TS80P
- * SCL = PA5
- * SDA = PA1
- */
+#include "Software_I2C.h"
+
 class I2CBB {
 public:
 	static void init();
diff --git a/workspace/TS100/Core/Drivers/OLED.cpp b/workspace/TS100/Core/Drivers/OLED.cpp
index 0e6790e7..a99fe344 100644
--- a/workspace/TS100/Core/Drivers/OLED.cpp
+++ b/workspace/TS100/Core/Drivers/OLED.cpp
@@ -191,9 +191,9 @@ void OLED::transitionSecondaryFramebuffer(bool forwardNavigation) {
 		offset = progress;
 
 		memmove(&firstStripPtr[oldStart], &firstStripPtr[oldPrevious],
-				OLED_WIDTH - progress);
+		OLED_WIDTH - progress);
 		memmove(&secondStripPtr[oldStart], &secondStripPtr[oldPrevious],
-				OLED_WIDTH - progress);
+		OLED_WIDTH - progress);
 
 		memmove(&firstStripPtr[newStart], &firstBackStripPtr[newEnd], progress);
 		memmove(&secondStripPtr[newStart], &secondBackStripPtr[newEnd],
@@ -213,7 +213,7 @@ void OLED::useSecondaryFramebuffer(bool useSecondary) {
 }
 
 void OLED::setRotation(bool leftHanded) {
-#if defined( MODEL_TS80) +defined( MODEL_TS80P) > 0
+#ifdef OLED_FLIP
 	leftHanded = !leftHanded;
 #endif
 	if (inLeftHandedMode == leftHanded) {
diff --git a/workspace/TS100/Core/Threads/GUIThread.cpp b/workspace/TS100/Core/Threads/GUIThread.cpp
index 92cdc377..04b5f7bd 100644
--- a/workspace/TS100/Core/Threads/GUIThread.cpp
+++ b/workspace/TS100/Core/Threads/GUIThread.cpp
@@ -59,11 +59,13 @@ void gui_drawTipTemp(bool symbol) {
 	// Draw tip temp handling unit conversion & tolerance near setpoint
 	uint16_t Temp = 0;
 #ifdef ENABLED_FAHRENHEIT_SUPPORT
-    if (systemSettings.temperatureInF)
+    if (systemSettings.temperatureInF){
         Temp = TipThermoModel::getTipInF();
-    else
+    }else
 #endif
-	Temp = TipThermoModel::getTipInC();
+	{
+		Temp = TipThermoModel::getTipInC();
+	}
 
 	OLED::printNumber(Temp, 3);  // Draw the tip temp out finally
 	if (symbol) {
@@ -247,7 +249,7 @@ static void gui_solderingTempAdjust() {
 		if (xTaskGetTickCount() - lastChange > 200)
 			return;  // exit if user just doesn't press anything for a bit
 
-#if defined (MODEL_TS80P)+defined(MODEL_TS80)>0
+#ifdef OLED_FLIP
 		if (!OLED::getRotation()) {
 #else
 		if (OLED::getRotation()) {
@@ -272,7 +274,7 @@ static void gui_solderingTempAdjust() {
 			OLED::drawSymbol(1);
 		}
 		OLED::print(SymbolSpace);
-#if defined (MODEL_TS80P)+defined(MODEL_TS80)>0
+#ifdef OLED_FLIP
 		if (!OLED::getRotation()) {
 #else
 		if (OLED::getRotation()) {
@@ -646,9 +648,10 @@ void startGUITask(void const *argument __unused) {
 	{
 		//Generate the flipped screen into ram for later use
 //flipped is generated by flipping each row
-		for(int row=0;row<2;row++){
-			for (int x =0;x<84;x++){
-				idleScreenBGF[(row*84)+x] =idleScreenBG[(row*84)+(83-x)];
+		for (int row = 0; row < 2; row++) {
+			for (int x = 0; x < 84; x++) {
+				idleScreenBGF[(row * 84) + x] = idleScreenBG[(row * 84)
+						+ (83 - x)];
 			}
 		}
 	}
@@ -769,7 +772,7 @@ void startGUITask(void const *argument __unused) {
 
 		} else {
 			OLED::setFont(0);
-#if defined (MODEL_TS80P)+defined(MODEL_TS80)>0
+#ifdef OLED_FLIP
 			if (!OLED::getRotation()) {
 #else
 			if (OLED::getRotation()) {
@@ -790,7 +793,7 @@ void startGUITask(void const *argument __unused) {
 			if (tempOnDisplay) {
 				// draw temp over the start soldering button
 				// Location changes on screen rotation
-#if defined (MODEL_TS80P)+defined(MODEL_TS80)>0
+#ifdef OLED_FLIP
 				if (!OLED::getRotation()) {
 #else
 				if (OLED::getRotation()) {
diff --git a/workspace/TS100/configuration.h b/workspace/TS100/configuration.h
index 6c299576..c115a443 100644
--- a/workspace/TS100/configuration.h
+++ b/workspace/TS100/configuration.h
@@ -1,4 +1,5 @@
 #pragma once
+#include "Model_Config.h"
 /**
  * Configuration.h
  * Define here your default pre settings for TS80 or TS100