me/IronOS
1
0
Fork 1
mirror of https://github.com/Ralim/IronOS.git synced 2025-02-26 07:53:55 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

Add tip compensation support

Browse Source
This commit is contained in:
Ben V. Brown
2017-09-27 09:42:39 +10:00
parent fb08e8b56c
commit e351527dd2
9 changed files with 133 additions and 58 deletions
Download Patch File Download Diff File Expand all files Collapse all files

33
workspace/TS100/inc/Settings.h
View File

@@ -11,35 +11,28 @@
#define SETTINGS_H_
#include <stdint.h>
#include "stm32f1xx_hal.h"
#define SETTINGSVERSION 2 /*Change this if you change the struct below to prevent people getting out of sync*/
//Display Speeds
#define DISPLAYMODE_FAST (0x00)
#define DISPLAYMODE_MEDIUM (0x01)
#define DISPLAYMODE_SLOW (0x02)
//Rounding Modes
#define ROUNDING_NONE (0x00)
#define ROUNDING_FIVE (0x01)
#define ROUNDING_TEN (0x02)
#define SETTINGSVERSION 0x10 /*Change this if you change the struct below to prevent people getting out of sync*/
/*
* This struct must be a multiple of 2 bytes as it is saved / restored from flash in uint16_t chunks
*/
typedef struct {
uint16_t SolderingTemp; //current set point for the iron
uint32_t SleepTemp; //temp to drop to in sleep
uint8_t version; //Used to track if a reset is needed on firmware upgrade
uint16_t SleepTemp; //temp to drop to in sleep
uint8_t SleepTime; //minutes timeout to sleep
uint8_t cutoutSetting :3; //(3 bits) The voltage we cut out at for under voltage
uint8_t powerDisplay :1; //Toggle to swap the arrows with a power readout instead
uint8_t OrientationMode :2; //If true we want to invert the display for lefties
uint8_t sensitivity :5; //Sensitivity of accelerometer (5 bits)
uint8_t autoStartMode :2; //Should the unit automatically jump straight into soldering mode when power is applied
uint8_t ShutdownTime :6; //Time until unit shuts down if left alone
uint8_t boostModeEnabled :1; //Boost mode swaps BUT_A in soldering mode to temporary soldering temp over-ride
uint8_t coolingTempBlink :1; //Should the temperature blink on the cool down screen until its <50C
uint8_t advancedScreens :1; //If enabled we draw more detailed screens with smaller fonts
uint8_t cutoutSetting; // The voltage we cut out at for under voltage
uint8_t powerDisplay; //Toggle to swap the arrows with a power readout instead
uint8_t OrientationMode; //If true we want to invert the display for lefties
uint8_t sensitivity; //Sensitivity of accelerometer (5 bits)
uint8_t autoStartMode; //Should the unit automatically jump straight into soldering mode when power is applied
uint8_t ShutdownTime; //Time until unit shuts down if left alone
uint8_t boostModeEnabled; //Boost mode swaps BUT_A in soldering mode to temporary soldering temp over-ride
uint8_t coolingTempBlink; //Should the temperature blink on the cool down screen until its <50C
uint8_t advancedScreens; //If enabled we draw more detailed screens with smaller fonts
uint16_t voltageDiv; //Voltage divisor factor
uint16_t BoostTemp; //Boost mode set point for the iron
int16_t CalibrationOffset; //This stores the temperature offset for this tip in the iron.
uint8_t version; //Used to track if a reset is needed on firmware upgrade
uint32_t padding; //This is here for in case we are not an even divisor so that nothing gets cut off
} systemSettingsType;