me/IronOS
1
0
Fork 1
mirror of https://github.com/Ralim/IronOS.git synced 2025-02-26 07:53:55 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

Add tip compensation support

Browse Source
This commit is contained in:
Ben V. Brown
2017-09-27 09:42:39 +10:00
parent fb08e8b56c
commit e351527dd2
9 changed files with 133 additions and 58 deletions
Download Patch File Download Diff File Expand all files Collapse all files

33
workspace/TS100/inc/Settings.h
View File

@@ -11,35 +11,28 @@
#define SETTINGS_H_
#include <stdint.h>
#include "stm32f1xx_hal.h"
#define SETTINGSVERSION 2 /*Change this if you change the struct below to prevent people getting out of sync*/
//Display Speeds
#define DISPLAYMODE_FAST (0x00)
#define DISPLAYMODE_MEDIUM (0x01)
#define DISPLAYMODE_SLOW (0x02)
//Rounding Modes
#define ROUNDING_NONE (0x00)
#define ROUNDING_FIVE (0x01)
#define ROUNDING_TEN (0x02)
#define SETTINGSVERSION 0x10 /*Change this if you change the struct below to prevent people getting out of sync*/
/*
* This struct must be a multiple of 2 bytes as it is saved / restored from flash in uint16_t chunks
*/
typedef struct {
uint16_t SolderingTemp; //current set point for the iron
uint32_t SleepTemp; //temp to drop to in sleep
uint8_t version; //Used to track if a reset is needed on firmware upgrade
uint16_t SleepTemp; //temp to drop to in sleep
uint8_t SleepTime; //minutes timeout to sleep
uint8_t cutoutSetting :3; //(3 bits) The voltage we cut out at for under voltage
uint8_t powerDisplay :1; //Toggle to swap the arrows with a power readout instead
uint8_t OrientationMode :2; //If true we want to invert the display for lefties
uint8_t sensitivity :5; //Sensitivity of accelerometer (5 bits)
uint8_t autoStartMode :2; //Should the unit automatically jump straight into soldering mode when power is applied
uint8_t ShutdownTime :6; //Time until unit shuts down if left alone
uint8_t boostModeEnabled :1; //Boost mode swaps BUT_A in soldering mode to temporary soldering temp over-ride
uint8_t coolingTempBlink :1; //Should the temperature blink on the cool down screen until its <50C
uint8_t advancedScreens :1; //If enabled we draw more detailed screens with smaller fonts
uint8_t cutoutSetting; // The voltage we cut out at for under voltage
uint8_t powerDisplay; //Toggle to swap the arrows with a power readout instead
uint8_t OrientationMode; //If true we want to invert the display for lefties
uint8_t sensitivity; //Sensitivity of accelerometer (5 bits)
uint8_t autoStartMode; //Should the unit automatically jump straight into soldering mode when power is applied
uint8_t ShutdownTime; //Time until unit shuts down if left alone
uint8_t boostModeEnabled; //Boost mode swaps BUT_A in soldering mode to temporary soldering temp over-ride
uint8_t coolingTempBlink; //Should the temperature blink on the cool down screen until its <50C
uint8_t advancedScreens; //If enabled we draw more detailed screens with smaller fonts
uint16_t voltageDiv; //Voltage divisor factor
uint16_t BoostTemp; //Boost mode set point for the iron
int16_t CalibrationOffset; //This stores the temperature offset for this tip in the iron.
uint8_t version; //Used to track if a reset is needed on firmware upgrade
uint32_t padding; //This is here for in case we are not an even divisor so that nothing gets cut off
} systemSettingsType;

5
workspace/TS100/inc/Translation.h
View File

@@ -10,6 +10,7 @@
extern const char* SettingsLongNames[12];
extern const char* SettingsShortNames[12];
extern const char* SettingsLongNames[13];
extern const char* SettingsShortNames[13];
extern const char* SettingsCalibrationWarning;
#endif /* TRANSLATION_H_ */

2
workspace/TS100/inc/hardware.h
View File

@@ -45,7 +45,7 @@ uint16_t getTipInstantTemperature();
void setTipPWM(uint8_t pulse);
uint16_t ctoTipMeasurement(uint16_t temp);
uint16_t tipMeasurementToC(uint16_t raw);
void setCalibrationOffset(int16_t offSet);
#ifdef __cplusplus
}
#endif

15
workspace/TS100/inc/main.hpp
View File

@@ -6,5 +6,20 @@
extern OLED lcd;
extern MMA8652FC accel;
enum ButtonState {
BUTTON_NONE = 0, /* No buttons pressed / < filter time*/
BUTTON_F_SHORT = 1, /* User has pressed the front button*/
BUTTON_B_SHORT = 2, /* User has pressed the back button*/
BUTTON_F_LONG = 4, /* User is holding the front button*/
BUTTON_B_LONG = 8, /* User is holding the back button*/
BUTTON_BOTH = 16, /* User has pressed both buttons*/
/*
* Note:
* Pressed means press + release, we trigger on a full \__/ pulse
* holding means it has gone low, and been low for longer than filter time
*/
};
ButtonState getButtonState();
#endif /* __MAIN_H */