Start linking in manual tip resistance

Env.yml

@@ -1,4 +1,3 @@
-version: "3"
 name: "ironos"
 services:
   builder:

source/Core/BSP/Miniware/BSP.cpp

@@ -382,9 +382,18 @@ uint8_t getTipResistanceX10() {
 #ifdef TIP_RESISTANCE_SENSE_Pin
   // Return tip resistance in x10 ohms
   // We can measure this using the op-amp
-  return lastTipResistance;
+  uint8_t user_selected_tip = getUserSelectedTipResistance();
+  if (user_selected_tip == 0) {
+    return lastTipResistance; // Auto mode
+  }
+  return user_selected_tip;
+
 #else
-  return TIP_RESISTANCE;
+  uint8_t user_selected_tip = getUserSelectedTipResistance();
+  if (user_selected_tip == 0) {
+    return TIP_RESISTANCE; // Auto mode
+  }
+  return user_selected_tip;
 #endif
 }
 #ifdef TIP_RESISTANCE_SENSE_Pin

source/Core/BSP/Pinecil/BSP.cpp

@@ -93,7 +93,13 @@ void setBuzzer(bool on) {}
 uint8_t  preStartChecks() { return 1; }
 uint64_t getDeviceID() { return dbg_id_get(); }
 
-uint8_t getTipResistanceX10() { return TIP_RESISTANCE; }
+uint8_t getTipResistanceX10() {
+  uint8_t user_selected_tip = getUserSelectedTipResistance();
+  if (user_selected_tip == 0) {
+    return TIP_RESISTANCE; // Auto mode
+  }
+  return user_selected_tip;
+}
 bool    isTipShorted() { return false; }
 uint8_t preStartChecksDone() { return 1; }
 

source/Core/BSP/Pinecilv2/BSP.cpp

@@ -152,7 +152,11 @@ uint8_t       tipResistanceReadingSlot = 0;
 uint8_t       getTipResistanceX10() {
   // Return tip resistance in x10 ohms
   // We can measure this using the op-amp
-  return lastTipResistance;
+  uint8_t user_selected_tip = getUserSelectedTipResistance();
+  if (user_selected_tip == 0) {
+    return lastTipResistance; // Auto mode
+  }
+  return user_selected_tip;
 }
 
 uint16_t getTipThermalMass() { return 120; }

source/Core/BSP/Pinecilv2/configuration.h

@@ -155,6 +155,8 @@
 #define POW_EPR                    1
 #define ENABLE_QC2                 1
 #define MAG_SLEEP_SUPPORT          1
+#define AUTO_TIP_SELECTION         1 // Can auto-select the tip
+#define TIPTYPE_T12                1 // Can manually pick a T12 tip
 #define DEVICE_HAS_VALIDATION_SUPPORT
 #define OLED_96x16 1
 #define TEMP_NTC

source/Core/BSP/Sequre/BSP.cpp

@@ -262,7 +262,11 @@ uint8_t getTipResistanceX10() {
 
   return TIP_RESISTANCE + ((TIP_RESISTANCE * scaler) / 100000);
 #else
-  return TIP_RESISTANCE;
+  uint8_t user_selected_tip = getUserSelectedTipResistance();
+  if (user_selected_tip == 0) {
+    return TIP_RESISTANCE; // Auto mode
+  }
+  return user_selected_tip;
 #endif
 }
 bool    isTipShorted() { return false; }

source/Core/Inc/Settings.h

@@ -11,7 +11,7 @@
 #define CORE_SETTINGS_H_
 #include <stdbool.h>
 #include <stdint.h>
-
+#include "configuration.h"
 #ifdef MODEL_Pinecilv2
 // Required settings reset for PR #1916
 #define SETTINGSVERSION (0x55AB) // This number is frozen, do not edit
@@ -124,7 +124,7 @@ typedef enum {
 */
 typedef enum {
   #ifdef AUTO_TIP_SELECTION
-  AUTO, // If the hardware supports automatic detection
+  TIP_TYPE_AUTO, // If the hardware supports automatic detection
 #endif
 
   #ifdef TIPTYPE_T12
@@ -137,11 +137,12 @@ typedef enum {
   // We do not know of other tuning tips (?yet?)
   #endif
   #ifdef TIPTYPE_JBC
-  JBC_2_5_OHM, // Small JBC tips as used in the S60
+  JBC_210_2_5_OHM, // Small JBC tips as used in the S60/S60P
   #endif
   TIP_TYPE_MAX, // Max value marker
 } tipType_t;
 
+uint8_t getUserSelectedTipResistance();
 
 // Settings wide operations
 void saveSettings();

source/Core/Src/Settings.cpp

@@ -304,12 +304,69 @@ const char *lookupTipName() {
 
   switch (value) {
 #ifdef AUTO_TIP_SELECTION
-  case tipType_t::AUTO:
+  case tipType_t::TIP_TYPE_AUTO:
-    return translatedString(Tr->USBPDModeDefault);
+    return translatedString(Tr->TipTypeAuto);
+    break;
+#endif
+#ifdef TIPTYPE_T12
+  case tipType_t::T12_8_OHM:
+    return translatedString(Tr->TipTypeT12Long);
+    break;
+  case tipType_t::T12_6_2_OHM:
+    return translatedString(Tr->TipTypeT12Short);
+    break;
+  case tipType_t::T12_4_OHM:
+    return translatedString(Tr->TipTypeT12PTS);
+    break;
+#endif
+#ifdef TIPTYE_TS80
+  case tipType_t::TS80_4_5_OHM:
+    return translatedString(Tr->TipTypeTS80);
+    break;
+#endif
+#ifdef TIPTYPE_JBC
+  case tipType_t::JBC_210_2_5_OHM:
+    return translatedString(Tr->TipTypeJBC);
     break;
 #endif
   default:
     return nullptr;
     break;
   }
+}
+// Returns the resistance for the current tip selected by the user or 0 for auto
+uint8_t getUserSelectedTipResistance() {
+  tipType_t value = (tipType_t)getSettingValue(SettingsOptions::SolderingTipType);
+
+  switch (value) {
+#ifdef AUTO_TIP_SELECTION
+  case tipType_t::TIP_TYPE_AUTO:
+    return 0;
+    break;
+#endif
+#ifdef TIPTYPE_T12
+  case tipType_t::T12_8_OHM:
+    return 80;
+    break;
+  case tipType_t::T12_6_2_OHM:
+    return 62;
+    break;
+  case tipType_t::T12_4_OHM:
+    return 40;
+    break;
+#endif
+#ifdef TIPTYE_TS80
+  case tipType_t::TS80_4_5_OHM:
+    return 45;
+    break;
+#endif
+#ifdef TIPTYPE_JBC
+  case tipType_t::JBC_210_2_5_OHM:
+    return 25;
+    break;
+#endif
+  default:
+    return 0;
+    break;
+  }
 }

source/Makefile

@@ -1,5 +1,5 @@
 ifndef model
-model:=Pinecil
+model:=Pinecilv2
 endif
 
 ALL_MINIWARE_MODELS=TS100 TS80 TS80P TS101