Start linking in manual tip resistance

source/Core/BSP/Miniware/BSP.cpp

@@ -382,9 +382,18 @@ uint8_t getTipResistanceX10() {
 #ifdef TIP_RESISTANCE_SENSE_Pin
   // Return tip resistance in x10 ohms
   // We can measure this using the op-amp
-  return lastTipResistance;
+  uint8_t user_selected_tip = getUserSelectedTipResistance();
+  if (user_selected_tip == 0) {
+    return lastTipResistance; // Auto mode
+  }
+  return user_selected_tip;
+
 #else
-  return TIP_RESISTANCE;
+  uint8_t user_selected_tip = getUserSelectedTipResistance();
+  if (user_selected_tip == 0) {
+    return TIP_RESISTANCE; // Auto mode
+  }
+  return user_selected_tip;
 #endif
 }
 #ifdef TIP_RESISTANCE_SENSE_Pin

source/Core/BSP/Pinecil/BSP.cpp

@@ -93,7 +93,13 @@ void setBuzzer(bool on) {}
 uint8_t  preStartChecks() { return 1; }
 uint64_t getDeviceID() { return dbg_id_get(); }
 
-uint8_t getTipResistanceX10() { return TIP_RESISTANCE; }
+uint8_t getTipResistanceX10() {
+  uint8_t user_selected_tip = getUserSelectedTipResistance();
+  if (user_selected_tip == 0) {
+    return TIP_RESISTANCE; // Auto mode
+  }
+  return user_selected_tip;
+}
 bool    isTipShorted() { return false; }
 uint8_t preStartChecksDone() { return 1; }
 

source/Core/BSP/Pinecilv2/BSP.cpp

@@ -152,7 +152,11 @@ uint8_t       tipResistanceReadingSlot = 0;
 uint8_t       getTipResistanceX10() {
   // Return tip resistance in x10 ohms
   // We can measure this using the op-amp
-  return lastTipResistance;
+  uint8_t user_selected_tip = getUserSelectedTipResistance();
+  if (user_selected_tip == 0) {
+    return lastTipResistance; // Auto mode
+  }
+  return user_selected_tip;
 }
 
 uint16_t getTipThermalMass() { return 120; }

source/Core/BSP/Pinecilv2/configuration.h

@@ -155,6 +155,8 @@
 #define POW_EPR                    1
 #define ENABLE_QC2                 1
 #define MAG_SLEEP_SUPPORT          1
+#define AUTO_TIP_SELECTION         1 // Can auto-select the tip
+#define TIPTYPE_T12                1 // Can manually pick a T12 tip
 #define DEVICE_HAS_VALIDATION_SUPPORT
 #define OLED_96x16 1
 #define TEMP_NTC

source/Core/BSP/Sequre/BSP.cpp

@@ -262,7 +262,11 @@ uint8_t getTipResistanceX10() {
 
   return TIP_RESISTANCE + ((TIP_RESISTANCE * scaler) / 100000);
 #else
-  return TIP_RESISTANCE;
+  uint8_t user_selected_tip = getUserSelectedTipResistance();
+  if (user_selected_tip == 0) {
+    return TIP_RESISTANCE; // Auto mode
+  }
+  return user_selected_tip;
 #endif
 }
 bool    isTipShorted() { return false; }