Off=>icon (#1678)

replacing Off by an Icon

Translations/translation_BE.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Джала: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Выкл."
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Разагрэць\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "П",
         "SettingLeftChar": "Л",
         "SettingAutoChar": "А",
-        "SettingOffChar": "O",
         "SettingSlowChar": "М",
         "SettingMediumChar": "С",
         "SettingFastChar": "Х",
-        "SettingStartNoneChar": "В",
         "SettingStartSolderingChar": "П",
         "SettingStartSleepChar": "Ч",
         "SettingStartSleepOffChar": "К",
-        "SettingLockDisableChar": "А",
         "SettingLockBoostChar": "Т",
         "SettingLockFullChar": "П"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "Аўта\nстарт",
-            "description": "Рэжым, у якім запускаецца паяльнік пры падачы сілкавання (В=Выкл. | П=Пайка | Ч=Чаканне | К=Чаканне пры комн. тэмп.)"
+            "description": "Рэжым, у якім запускаецца паяльнік пры падачы сілкавання (П=Пайка | Ч=Чаканне | К=Чаканне пры комн. тэмп.)"
         },
         "TempChangeShortStep": {
             "displayText": "Крок тэмп.\nкар. нац.",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "Дазволіць\nблок. кнопак",
-            "description": "Пры рабоце падоўжаны націск дзьвух кнопак блакуе іх (А=Адключана | Т=Толькі турба | П=Поўная блакіроўка)"
+            "description": "Пры рабоце падоўжаны націск дзьвух кнопак блакуе іх (Т=Толькі турба | П=Поўная блакіроўка)"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile\nPhases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat\nTemp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat\nSpeed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1\nTemp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1\nDuration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2\nTemp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2\nDuration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3\nTemp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3\nDuration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4\nTemp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4\nDuration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5\nTemp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5\nDuration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown\nSpeed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Адчувальнасць\nакселерометра",
-            "description": "Адчувальнасць акселерометра (0=Выкл. | 1=Мін. | ... | 9=Макс.)"
+            "description": "Адчувальнасць акселерометра (1=Мін. | ... | 9=Макс.)"
         },
         "SleepTemperature": {
             "displayText": "Тэмп.\nчакання",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Эфект Хола\nадчувальнасць",
-            "description": "Узровень адчувальнасці датчыка хола ў рэжыме сну (0=Выкл. | 1=Мін. | ... | 9=Макс.)"
+            "description": "Узровень адчувальнасці датчыка хола ў рэжыме сну (1=Мін. | ... | 9=Макс.)"
         },
         "TemperatureUnit": {
             "displayText": "Адзінкі\nтэмпературы",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "Хуткасць\nанімацыі",
-            "description": "Хуткасць анімацыі гузікаў у галоўным меню (Мілісекунды) (А=Адключана | Н=Нізкая | С=Сярэдняя | В=Высокая)"
+            "description": "Хуткасць анімацыі гузікаў у галоўным меню (Мілісекунды) (Н=Нізкая | С=Сярэдняя | В=Высокая)"
         },
         "AnimLoop": {
             "displayText": "Зацыкленая\nанімацыя",

Translations/translation_BG.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Човка:\n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Изкл."
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Загряване\n"
@@ -80,11 +83,9 @@
         "SettingRightChar": "Д",
         "SettingLeftChar": "Л",
         "SettingAutoChar": "А",
-        "SettingOffChar": "И",
         "SettingSlowChar": "Н",
         "SettingMediumChar": "С",
         "SettingFastChar": "В",
-        "SettingStartNoneChar": "И",
         "SettingStartSolderingChar": "З",
         "SettingStartSleepChar": "С",
         "SettingStartSleepOffChar": "П",
@@ -141,7 +142,7 @@
         },
         "AutoStart": {
             "displayText": "Автоматичен\nработен режим",
-            "description": "Режим на поялника при включване на захранването (И=Изкл. | З=Запояване | С=Сън | П=Покой на стайна температурата)"
+            "description": "Режим на поялника при включване на захранването (З=Запояване | С=Сън | П=Покой на стайна температурата)"
         },
         "TempChangeShortStep": {
             "displayText": "Промяна T\nбързо",
@@ -153,7 +154,7 @@
         },
         "LockingMode": {
             "displayText": "Бутони за\nзаключване",
-            "description": "Докато запоявате, задръжте двата бутона, за да превключите заключването им (И=Изкл. | Т=Турбо режим | П=Пълно)"
+            "description": "Докато запоявате, задръжте двата бутона, за да превключите заключването им (Т=Турбо режим | П=Пълно)"
         },
         "ProfilePhases": {
             "displayText": "Брой\nетапи",
@@ -213,7 +214,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Чувствител.\nна движение",
-            "description": "Чувствителност на движение на акселерометър (0=Изкл. | 1=Слабо | ... | 9=Силно)"
+            "description": "Чувствителност на движение на акселерометър (1=Слабо | ... | 9=Силно)"
         },
         "SleepTemperature": {
             "displayText": "Темп.\nсън",
@@ -229,7 +230,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Датчик\nна Хол",
-            "description": "Чувствителност на сензора към магнитно поле (0=Изкл. | 1=Слабо | ... | 9=Силно)"
+            "description": "Чувствителност на сензора към магнитно поле (1=Слабо | ... | 9=Силно)"
         },
         "TemperatureUnit": {
             "displayText": "Единици за\nтемпературата",
@@ -253,7 +254,7 @@
         },
         "AnimSpeed": {
             "displayText": "Скорост на\nанимацията",
-            "description": "Скорост на анимация на иконата в главното меню (И=Изкл. | Н=Ниска | C=Средна | B=Висока)"
+            "description": "Скорост на анимация на иконата в главното меню (Н=Ниска | C=Средна | B=Висока)"
         },
         "AnimLoop": {
             "displayText": "Анимац.\nцикъл",

Translations/translation_CS.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Hrot: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Vyp"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Předehřívání\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "P",
         "SettingLeftChar": "L",
         "SettingAutoChar": "A",
-        "SettingOffChar": "D",
         "SettingSlowChar": "P",
         "SettingMediumChar": "S",
         "SettingFastChar": "R",
-        "SettingStartNoneChar": "V",
         "SettingStartSolderingChar": "P",
         "SettingStartSleepChar": "S",
         "SettingStartSleepOffChar": "M",
-        "SettingLockDisableChar": "Z",
         "SettingLockBoostChar": "B",
         "SettingLockFullChar": "U"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "Chování\npři startu",
-            "description": "V=vypnuto | P=pájecí teplota | S=spánková teplota | M=zahřát hrot po pohybu"
+            "description": "P=pájecí teplota | S=spánková teplota | M=zahřát hrot po pohybu"
         },
         "TempChangeShortStep": {
             "displayText": "Krok teploty\nkrátký?",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "Povolit zamč.\ntlačítek",
-            "description": "Při pájení podržte obě tlačítka pro jejich zamčení (Z=zakázáno | B=pouze v režimu boost | U=úplné zamčení)"
+            "description": "Při pájení podržte obě tlačítka pro jejich zamčení (B=pouze v režimu boost | U=úplné zamčení)"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile\nPhases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat\nTemp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat\nSpeed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1\nTemp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1\nDuration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2\nTemp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2\nDuration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3\nTemp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3\nDuration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4\nTemp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4\nDuration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5\nTemp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5\nDuration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown\nSpeed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profilové\nFáze",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Citlivost\nna pohyb",
-            "description": "0=vyp | 1=nejméně citlivé | ... | 9=nejvíce citlivé"
+            "description": "1=nejméně citlivé | ... | 9=nejvíce citlivé"
         },
         "SleepTemperature": {
             "displayText": "Teplota\nve spánku",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Citlivost\nHall. čidla",
-            "description": "Citlivost Hallova čidla pro detekci spánku (0=vypnuto | 1=nejméně citlivé | ... | 9=nejvíce citlivé)"
+            "description": "Citlivost Hallova čidla pro detekci spánku (1=nejméně citlivé | ... | 9=nejvíce citlivé)"
         },
         "TemperatureUnit": {
             "displayText": "Jednotka\nteploty",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "Anim.\nrychlost",
-            "description": "Tempo animace ikon v menu (O=vypnuto | P=pomalu | S=středně | R=rychle)"
+            "description": "Tempo animace ikon v menu (P=pomalu | S=středně | R=rychle)"
         },
         "AnimLoop": {
             "displayText": "Anim.\nsmyčka",

Translations/translation_DA.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Tip: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Off"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Preheat\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "H",
         "SettingLeftChar": "V",
         "SettingAutoChar": "A",
-        "SettingOffChar": "O",
         "SettingSlowChar": "S",
         "SettingMediumChar": "M",
         "SettingFastChar": "F",
-        "SettingStartNoneChar": "S",
         "SettingStartSolderingChar": "L",
         "SettingStartSleepChar": "D",
         "SettingStartSleepOffChar": "R",
-        "SettingLockDisableChar": "D",
         "SettingLockBoostChar": "B",
         "SettingLockFullChar": "F"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "Start-up\nOpførsel",
-            "description": "Start automatisk med lodning når strøm sættes til. (S=Slukket | L=Lodning | D=Dvale tilstand | R=Dvale tilstand rumtemperatur)"
+            "description": "Start automatisk med lodning når strøm sættes til. (L=Lodning | D=Dvale tilstand | R=Dvale tilstand rumtemperatur)"
         },
         "TempChangeShortStep": {
             "displayText": "Temp ændring\nkort",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "Tillad låsning\naf knapperne",
-            "description": "Hold begge knapper nede under lodning for at låse dem (D=deaktiver | B=kun boost-tilstand | F=fuld låsning)"
+            "description": "Hold begge knapper nede under lodning for at låse dem (B=kun boost-tilstand | F=fuld låsning)"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile\nPhases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat\nTemp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat\nSpeed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1\nTemp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1\nDuration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2\nTemp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2\nDuration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3\nTemp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3\nDuration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4\nTemp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4\nDuration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5\nTemp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5\nDuration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown\nSpeed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Bevægelses\nfølsomhed",
-            "description": "Bevægelsesfølsomhed (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)"
+            "description": "Bevægelsesfølsomhed (1=Mindst følsom | ... | 9=Mest følsom)"
         },
         "SleepTemperature": {
             "displayText": "Dvale\ntemp",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Hall sensor\nfølsomhed",
-            "description": "følsomhed overfor magneten (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)"
+            "description": "følsomhed overfor magneten (1=Mindst følsom | ... | 9=Mest følsom)"
         },
         "TemperatureUnit": {
             "displayText": "Temperatur\nEnhed",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "Anim.\nHastighed",
-            "description": "Hastigheden for ikonanimationer i menuen (O=fra | S=langsomt | M=medium | F=hurtigt)"
+            "description": "Hastigheden for ikonanimationer i menuen (S=langsomt | M=medium | F=hurtigt)"
         },
         "AnimLoop": {
             "displayText": "Anim.\nsløfe",

Translations/translation_DE.json

@@ -60,9 +60,6 @@
         "SleepingTipAdvancedString": {
             "message": "Temp: \n"
         },
-        "OffString": {
-            "message": "aus"
-        },
         "ProfilePreheatString": {
             "message": "Vorwärmen\n"
         },
@@ -80,15 +77,12 @@
         "SettingRightChar": "R",
         "SettingLeftChar": "L",
         "SettingAutoChar": "A",
-        "SettingOffChar": "A",
         "SettingSlowChar": "L",
         "SettingMediumChar": "M",
         "SettingFastChar": "S",
-        "SettingStartNoneChar": "A",
         "SettingStartSolderingChar": "L",
         "SettingStartSleepChar": "R",
         "SettingStartSleepOffChar": "K",
-        "SettingLockDisableChar": "A",
         "SettingLockBoostChar": "B",
         "SettingLockFullChar": "V"
     },
@@ -141,7 +135,7 @@
         },
         "AutoStart": {
             "displayText": "Start im\nLötmodus",
-            "description": "Heizverhalten beim Einschalten der Spannungsversorgung (A=aus | L=Lötmodus | R=Ruhemodus | K=Ruhemodus mit kalter Spitze)"
+            "description": "Heizverhalten beim Einschalten der Spannungsversorgung (L=Lötmodus | R=Ruhemodus | K=Ruhemodus mit kalter Spitze)"
         },
         "TempChangeShortStep": {
             "displayText": "Temp-Schritt\nDruck kurz",
@@ -153,7 +147,7 @@
         },
         "LockingMode": {
             "displayText": "Tasten-\nsperre",
-            "description": "Langes Drücken beider Tasten im Lötmodus sperrt diese (A=aus | B=nur Boost | V=vollständig)"
+            "description": "Langes Drücken beider Tasten im Lötmodus sperrt diese (B=nur Boost | V=vollständig)"
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhasen",
@@ -213,7 +207,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Bewegungs-\nempfindlichk.",
-            "description": "0=aus | 1=minimal | ... | 9=maximal"
+            "description": "1=minimal | ... | 9=maximal"
         },
         "SleepTemperature": {
             "displayText": "Ruhe-\ntemperatur",
@@ -229,7 +223,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Empfindlichkeit\nder Hall-Sonde",
-            "description": "Empfindlichkeit der Hall-Sonde um den Ruhemodus auszulösen (0=aus | 1=minimal | ... | 9=maximal)"
+            "description": "Empfindlichkeit der Hall-Sonde um den Ruhemodus auszulösen (1=minimal | ... | 9=maximal)"
         },
         "TemperatureUnit": {
             "displayText": "Temperatur-\neinheit",
@@ -253,7 +247,7 @@
         },
         "AnimSpeed": {
             "displayText": "Anim.\nGeschw.",
-            "description": "Geschwindigkeit der Icon-Animationen im Menü (A=aus | L=langsam | M=mittel | S=schnell)"
+            "description": "Geschwindigkeit der Icon-Animationen im Menü (L=langsam | M=mittel | S=schnell)"
         },
         "AnimLoop": {
             "displayText": "Anim.\nSchleife",

Translations/translation_EL.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Μύτη: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Απ."
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Preheat\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "R",
         "SettingLeftChar": "L",
         "SettingAutoChar": "Α",
-        "SettingOffChar": "0",
         "SettingSlowChar": "Α",
         "SettingMediumChar": "Μ",
         "SettingFastChar": "Γ",
-        "SettingStartNoneChar": "0",
         "SettingStartSolderingChar": "Κ",
         "SettingStartSleepChar": "Ζ",
         "SettingStartSleepOffChar": "Υ",
-        "SettingLockDisableChar": "Α",
         "SettingLockBoostChar": "B",
         "SettingLockFullChar": "Π"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "Ζέσταμα\nκατά την εν.",
-            "description": "0=off | Κ=θερμ. κόλλησης | Z=αναμονή σε θερμοκρασία ύπνου μέχρι την κίνηση | Υ=αναμονή χωρίς ζέσταμα μέχρι την κίνηση"
+            "description": "Κ=θερμ. κόλλησης | Z=αναμονή σε θερμοκρασία ύπνου μέχρι την κίνηση | Υ=αναμονή χωρίς ζέσταμα μέχρι την κίνηση"
         },
         "TempChangeShortStep": {
             "displayText": "Αλλαγή θερμοκ.\nστιγμιαίο",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "Κλείδωμα\nπλήκτρων",
-            "description": "Κατά την κόλληση, κρατήστε και τα δύο πλήκτρα για κλείδωμα (A=απενεργοποίηση | B=μόνο λειτ. boost | Π=πλήρες κλείδωμα)"
+            "description": "Κατά την κόλληση, κρατήστε και τα δύο πλήκτρα για κλείδωμα (B=μόνο λειτ. boost | Π=πλήρες κλείδωμα)"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile\nPhases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat\nTemp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat\nSpeed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1\nTemp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1\nDuration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2\nTemp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2\nDuration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3\nTemp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3\nDuration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4\nTemp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4\nDuration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5\nTemp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5\nDuration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown\nSpeed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Ευαισθησία\nκίνησης",
-            "description": "0=off | 1=λιγότερο ευαίσθητο | ... | 9=περισσότερο ευαίσθητο"
+            "description": "1=λιγότερο ευαίσθητο | ... | 9=περισσότερο ευαίσθητο"
         },
         "SleepTemperature": {
             "displayText": "Θερμοκρ.\nύπνου",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Ευαισθ. αισθ. \nφαιν. Hall",
-            "description": "Ευαισθησία του αισθητήρα φαινομένου Hall για εντοπισμό αδράνειας (0=off | 1=λιγότερο ευαίσθητο | ... | 9=περισσότερο ευαίσθητο)"
+            "description": "Ευαισθησία του αισθητήρα φαινομένου Hall για εντοπισμό αδράνειας (1=λιγότερο ευαίσθητο | ... | 9=περισσότερο ευαίσθητο)"
         },
         "TemperatureUnit": {
             "displayText": "Μονάδες\nθερμοκρασίας",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "Ταχύτητα\nκιν. εικονιδ.",
-            "description": "Ρυθμός κίνησης εικονιδίων στο μενού (0=off | Α=αργός | Μ=μέτριος | Γ=γρήγορος)"
+            "description": "Ρυθμός κίνησης εικονιδίων στο μενού (Α=αργός | Μ=μέτριος | Γ=γρήγορος)"
         },
         "AnimLoop": {
             "displayText": "Επανάληψη\nκιν. εικονιδ.",

Translations/translation_EN.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Tip: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Off"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Preheat\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "R",
         "SettingLeftChar": "L",
         "SettingAutoChar": "A",
-        "SettingOffChar": "O",
         "SettingSlowChar": "S",
         "SettingMediumChar": "M",
         "SettingFastChar": "F",
-        "SettingStartNoneChar": "O",
         "SettingStartSolderingChar": "S",
         "SettingStartSleepChar": "Z",
         "SettingStartSleepOffChar": "R",
-        "SettingLockDisableChar": "D",
         "SettingLockBoostChar": "B",
         "SettingLockFullChar": "F"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "Start-up\nbehavior",
-            "description": "O=off | S=heat to soldering temp | Z=standby at sleep temp until moved | R=standby without heating until moved"
+            "description": "S=heat to soldering temp | Z=standby at sleep temp until moved | R=standby without heating until moved"
         },
         "TempChangeShortStep": {
             "displayText": "Temp change\nshort",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "Allow locking\nbuttons",
-            "description": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+            "description": "While soldering, hold down both buttons to toggle locking them (B=boost mode only | F=full locking)"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile\nPhases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat\nTemp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat\nSpeed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1\nTemp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1\nDuration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2\nTemp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2\nDuration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3\nTemp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3\nDuration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4\nTemp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4\nDuration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5\nTemp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5\nDuration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown\nSpeed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Motion\nsensitivity",
-            "description": "0=off | 1=least sensitive | ... | 9=most sensitive"
+            "description": "1=least sensitive | ... | 9=most sensitive"
         },
         "SleepTemperature": {
             "displayText": "Sleep\ntemp",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Hall sensor\nsensitivity",
-            "description": "Sensitivity to magnets (0=off | 1=least sensitive | ... | 9=most sensitive)"
+            "description": "Sensitivity to magnets (1=least sensitive | ... | 9=most sensitive)"
         },
         "TemperatureUnit": {
             "displayText": "Temperature\nunit",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "Anim.\nspeed",
-            "description": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
+            "description": "Pace of icon animations in menu (S=slow | M=medium | F=fast)"
         },
         "AnimLoop": {
             "displayText": "Anim.\nloop",

Translations/translation_ES.json

@@ -60,9 +60,6 @@
         "SleepingTipAdvancedString": {
             "message": "Punta: \n"
         },
-        "OffString": {
-            "message": "Apagado"
-        },
         "ProfilePreheatString": {
             "message": "Precalentado\n"
         },
@@ -80,15 +77,12 @@
         "SettingRightChar": "D",
         "SettingLeftChar": "I",
         "SettingAutoChar": "A",
-        "SettingOffChar": "O",
         "SettingSlowChar": "L",
         "SettingMediumChar": "M",
         "SettingFastChar": "R",
-        "SettingStartNoneChar": "N",
         "SettingStartSolderingChar": "S",
         "SettingStartSleepChar": "R",
         "SettingStartSleepOffChar": "F",
-        "SettingLockDisableChar": "D",
         "SettingLockBoostChar": "B",
         "SettingLockFullChar": "F"
     },
@@ -142,7 +136,7 @@
         },
         "AutoStart": {
             "displayText": "Calentar\nal enchufar",
-            "description": "Calentado automático al iniciar (N=no | S=entrar en modo soldar | R=solo entrar en reposo | F=en reposo pero mantiene la punta fría)"
+            "description": "Calentado automático al iniciar (S=entrar en modo soldar | R=solo entrar en reposo | F=en reposo pero mantiene la punta fría)"
         },
         "TempChangeShortStep": {
             "displayText": "Cambio temp.\npuls. cortas",
@@ -154,7 +148,63 @@
         },
         "LockingMode": {
             "displayText": "Permitir botones\nbloqueo",
-            "description": "Mientras suelda, mantenga pulsados ambos botones para alternar su bloqueo (D=desactivar | B=sólo modo boost | F=bloqueo total)"
+            "description": "Mientras suelda, mantenga pulsados ambos botones para alternar su bloqueo (B=sólo modo boost | F=bloqueo total)"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile\nPhases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat\nTemp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat\nSpeed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1\nTemp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1\nDuration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2\nTemp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2\nDuration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3\nTemp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3\nDuration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4\nTemp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4\nDuration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5\nTemp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5\nDuration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown\nSpeed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Fases de\nPerfil",
@@ -214,7 +264,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Detección de\nmovimiento",
-            "description": "Tiempo de reacción al agarrar (0=no | 1=menos sensible | ... | 9=más sensible)"
+            "description": "Tiempo de reacción al agarrar (1=menos sensible | ... | 9=más sensible)"
         },
         "SleepTemperature": {
             "displayText": "Temperatura\nen reposo",
@@ -230,7 +280,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Hall Eff\nSensibilidad",
-            "description": "Sensibilidad del sensor de efecto Hall en la detección de reposo (0=no | 1=menos sensible | ... | 9=más sensible)"
+            "description": "Sensibilidad del sensor de efecto Hall en la detección de reposo (1=menos sensible | ... | 9=más sensible)"
         },
         "TemperatureUnit": {
             "displayText": "Unidad de\ntemperatura",
@@ -254,7 +304,7 @@
         },
         "AnimSpeed": {
             "displayText": "Anim.\nvelocidad",
-            "description": "Velocidad de animaciones de iconos en el menú (O=apagado | L=baja | M=media | R=alta)"
+            "description": "Velocidad de animaciones de iconos en el menú (L=baja | M=media | R=alta)"
         },
         "AnimLoop": {
             "displayText": "Anim.\nbucle",

Translations/translation_FI.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Kärki: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Off"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Preheat\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "O",
         "SettingLeftChar": "V",
         "SettingAutoChar": "A",
-        "SettingOffChar": "P",
         "SettingSlowChar": "A",
         "SettingMediumChar": "M",
         "SettingFastChar": "S",
-        "SettingStartNoneChar": "E",
         "SettingStartSolderingChar": "J",
         "SettingStartSleepChar": "L",
         "SettingStartSleepOffChar": "H",
-        "SettingLockDisableChar": "P",
         "SettingLockBoostChar": "V",
         "SettingLockFullChar": "K"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "Autom.\nkäynnistys",
-            "description": "Käynnistää virrat kytkettäessä juotostilan automaattisesti. (E=Ei käytössä | J=juotostila | L=Lepotila | H=Lepotila huoneenlämpö)"
+            "description": "Käynnistää virrat kytkettäessä juotostilan automaattisesti. (J=juotostila | L=Lepotila | H=Lepotila huoneenlämpö)"
         },
         "TempChangeShortStep": {
             "displayText": "Lämmön muutos\nlyhyt painal.",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "Salli nappien\nlukitus",
-            "description": "Kolvatessa paina molempia näppäimiä lukitaksesi ne (P=pois | V=vain tehostus | K=kaikki)"
+            "description": "Kolvatessa paina molempia näppäimiä lukitaksesi ne (V=vain tehostus | K=kaikki)"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile\nPhases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat\nTemp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat\nSpeed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1\nTemp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1\nDuration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2\nTemp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2\nDuration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3\nTemp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3\nDuration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4\nTemp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4\nDuration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5\nTemp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5\nDuration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown\nSpeed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Liikkeen\nherkkyys",
-            "description": "0=pois päältä | 1=vähäinen herkkyys | ... | 9=suurin herkkyys"
+            "description": "1=vähäinen herkkyys | ... | 9=suurin herkkyys"
         },
         "SleepTemperature": {
             "displayText": "Lepotilan\nlämpötila",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Hall-\nherk.",
-            "description": "Hall-efektianturin herkkyys lepotilan tunnistuksessa (0=pois päältä | 1=vähäinen herkkyys | ... | 9=suurin herkkyys)"
+            "description": "Hall-efektianturin herkkyys lepotilan tunnistuksessa (1=vähäinen herkkyys | ... | 9=suurin herkkyys)"
         },
         "TemperatureUnit": {
             "displayText": "Lämpötilan\nyksikkö",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "Animaation\nnopeus",
-            "description": "Animaatioiden nopeus valikossa (P=pois | A=alhainen | K=keskiverto | S=suuri)"
+            "description": "Animaatioiden nopeus valikossa (A=alhainen | K=keskiverto | S=suuri)"
         },
         "AnimLoop": {
             "displayText": "Animaation\ntoistaminen",

Translations/translation_FR.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Panne: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Off"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Preheat\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "D",
         "SettingLeftChar": "G",
         "SettingAutoChar": "A",
-        "SettingOffChar": "D",
         "SettingSlowChar": "L",
         "SettingMediumChar": "M",
         "SettingFastChar": "R",
-        "SettingStartNoneChar": "D",
         "SettingStartSolderingChar": "A",
         "SettingStartSleepChar": "V",
         "SettingStartSleepOffChar": "O",
-        "SettingLockDisableChar": "D",
         "SettingLockBoostChar": "B",
         "SettingLockFullChar": "V"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "Chauffer au\ndémarrage",
-            "description": "D=désactivé | A=activé | V=mode veille | O=mode veille à température ambiante"
+            "description": "A=activé | V=mode veille | O=mode veille à température ambiante"
         },
         "TempChangeShortStep": {
             "displayText": "Incrément\nappui court",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "Verrouiller\nles boutons",
-            "description": "Pendant la soudure, appuyer sur les deux boutons pour les verrouiller (D=désactivé | B=boost seulement | V=verr. total)"
+            "description": "Pendant la soudure, appuyer sur les deux boutons pour les verrouiller (B=boost seulement | V=verr. total)"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile\nPhases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat\nTemp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat\nSpeed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1\nTemp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1\nDuration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2\nTemp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2\nDuration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3\nTemp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3\nDuration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4\nTemp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4\nDuration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5\nTemp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5\nDuration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown\nSpeed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Sensibilité\nau mouvement",
-            "description": "0=désactivé | 1=peu sensible | ... | 9=très sensible"
+            "description": "1=peu sensible | ... | 9=très sensible"
         },
         "SleepTemperature": {
             "displayText": "Temp.\nveille",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Sensibilité\ncapteur effet hall",
-            "description": "Sensibilité du capteur à effet Hall pour la mise en veille (0=désactivé | 1=peu sensible | ... | 9=très sensible)"
+            "description": "Sensibilité du capteur à effet Hall pour la mise en veille (1=peu sensible | ... | 9=très sensible)"
         },
         "TemperatureUnit": {
             "displayText": "Unité de\ntempérature",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "Vitesse\nanim. icônes",
-            "description": "Vitesse des animations des icônes dans le menu (D=désactivé | L=lente | M=moyenne | R=rapide)"
+            "description": "Vitesse des animations des icônes dans le menu (L=lente | M=moyenne | R=rapide)"
         },
         "AnimLoop": {
             "displayText": "Rejouer\nanim. icônes",

Translations/translation_HR.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Vrh: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Off"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Preheat\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "D",
         "SettingLeftChar": "L",
         "SettingAutoChar": "A",
-        "SettingOffChar": "U",
         "SettingSlowChar": "S",
         "SettingMediumChar": "M",
         "SettingFastChar": "B",
-        "SettingStartNoneChar": "U",
         "SettingStartSolderingChar": "L",
         "SettingStartSleepChar": "T",
         "SettingStartSleepOffChar": "H",
-        "SettingLockDisableChar": "O",
         "SettingLockBoostChar": "B",
         "SettingLockFullChar": "Z"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "Auto\nstart",
-            "description": "Ako je aktivno, lemilica po uključivanju napajanja odmah počinje grijati. (U=ugašeno | L=lemljenje | T=spavanje toplo | H=spavanje hladno)"
+            "description": "Ako je aktivno, lemilica po uključivanju napajanja odmah počinje grijati. (L=lemljenje | T=spavanje toplo | H=spavanje hladno)"
         },
         "TempChangeShortStep": {
             "displayText": "Korak temp\nkratki pritisak",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "Zaključavanje\ntipki",
-            "description": "Tokom lemljenja, držite obje tipke kako biste ih zaključali ili otključali (O=otključano | B=zaključan boost | Z=zaključano sve)"
+            "description": "Tokom lemljenja, držite obje tipke kako biste ih zaključali ili otključali (B=zaključan boost | Z=zaključano sve)"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile\nPhases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat\nTemp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat\nSpeed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1\nTemp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1\nDuration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2\nTemp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2\nDuration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3\nTemp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3\nDuration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4\nTemp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4\nDuration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5\nTemp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5\nDuration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown\nSpeed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Osjetljivost\npokreta",
-            "description": "Osjetljivost prepoznavanja pokreta. (0=ugašeno | 1=najmanje osjetljivo | ... | 9=najosjetljivije)"
+            "description": "Osjetljivost prepoznavanja pokreta. (1=najmanje osjetljivo | ... | 9=najosjetljivije)"
         },
         "SleepTemperature": {
             "displayText": "Temp\nspavanja",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Osjetljivost\nHall senzora",
-            "description": "Osjetljivost senzora magnetskog polja za detekciju spavanja (U=Ugašeno | N=Najmanja | S=Srednja | V=Visoka)"
+            "description": "Osjetljivost senzora magnetskog polja za detekciju spavanja (N=Najmanja | S=Srednja | V=Visoka)"
         },
         "TemperatureUnit": {
             "displayText": "Jedinica\ntemperature",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "Brzina\nanimacije",
-            "description": "Brzina animacije ikona u menijima (U=ugašeno | S=sporo | M=srednje | B=brzo)"
+            "description": "Brzina animacije ikona u menijima (S=sporo | M=srednje | B=brzo)"
         },
         "AnimLoop": {
             "displayText": "Ponavljanje\nanimacije",

Translations/translation_HU.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Hegy: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Ki"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Preheat\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "J",
         "SettingLeftChar": "B",
         "SettingAutoChar": "A",
-        "SettingOffChar": "0",
         "SettingSlowChar": "L",
         "SettingMediumChar": "K",
         "SettingFastChar": "Gy",
-        "SettingStartNoneChar": "K",
         "SettingStartSolderingChar": "F",
         "SettingStartSleepChar": "A",
         "SettingStartSleepOffChar": "Sz",
-        "SettingLockDisableChar": "K",
         "SettingLockBoostChar": "B",
         "SettingLockFullChar": "T"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "Automatikus\nindítás",
-            "description": "Bekapcsolás után automatikusan lépjen forrasztás módba (K=ki | F=forrasztás | A=alvó mód | Sz=szobahőmérséklet)"
+            "description": "Bekapcsolás után automatikusan lépjen forrasztás módba (F=forrasztás | A=alvó mód | Sz=szobahőmérséklet)"
         },
         "TempChangeShortStep": {
             "displayText": "Hőm. állítás\nrövid",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "Lezárás\nengedélyezés",
-            "description": "Forrasztás közben mindkét gombot hosszan lenyomva lezárja a kezelést (K=ki | B=csak \"boost\" módban | T=teljes lezárás)"
+            "description": "Forrasztás közben mindkét gombot hosszan lenyomva lezárja a kezelést (B=csak \"boost\" módban | T=teljes lezárás)"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile\nPhases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat\nTemp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat\nSpeed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1\nTemp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1\nDuration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2\nTemp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2\nDuration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3\nTemp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3\nDuration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4\nTemp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4\nDuration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5\nTemp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5\nDuration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown\nSpeed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Mozgás\nérzékenység",
-            "description": "Mozgás érzékenység beállítása (0=kikapcsolva | 1=legkevésbé érzékeny | ... | 9=legérzékenyebb)"
+            "description": "Mozgás érzékenység beállítása (1=legkevésbé érzékeny | ... | 9=legérzékenyebb)"
         },
         "SleepTemperature": {
             "displayText": "Alvási\nhőmérséklet",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Alvásérzékelő\nérzékenység",
-            "description": "Alvásérzékelő gyorsulásmérő érzékenysége (0=kikapcsolva | 1=legkevésbé érzékeny | ... | 9=legérzékenyebb)"
+            "description": "Alvásérzékelő gyorsulásmérő érzékenysége (1=legkevésbé érzékeny | ... | 9=legérzékenyebb)"
         },
         "TemperatureUnit": {
             "displayText": "Hőmérséklet\nmértékegysége",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "Animáció\nsebessége",
-            "description": "Menüikonok animációjának sebessége (0=ki | L=lassú | K=közepes | Gy=gyors)"
+            "description": "Menüikonok animációjának sebessége (L=lassú | K=közepes | Gy=gyors)"
         },
         "AnimLoop": {
             "displayText": "Folytonos\nanimáció",

Translations/translation_IT.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Punta: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "OFF"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Preriscaldamento\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "D",
         "SettingLeftChar": "S",
         "SettingAutoChar": "A",
-        "SettingOffChar": "O",
         "SettingSlowChar": "L",
         "SettingMediumChar": "M",
         "SettingFastChar": "V",
-        "SettingStartNoneChar": "D",
         "SettingStartSolderingChar": "S",
         "SettingStartSleepChar": "R",
         "SettingStartSleepOffChar": "A",
-        "SettingLockDisableChar": "D",
         "SettingLockBoostChar": "T",
         "SettingLockFullChar": "C"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "Avvio\nautomatico",
-            "description": "Attiva automaticamente il saldatore quando viene alimentato [D: disattiva; S: saldatura; R: riposo; A: temperatura ambiente]"
+            "description": "Attiva automaticamente il saldatore quando viene alimentato [S: saldatura; R: riposo; A: temperatura ambiente]"
         },
         "TempChangeShortStep": {
             "displayText": "Temp passo\nbreve",
@@ -153,7 +153,7 @@
         },
         "LockingMode": {
             "displayText": "Blocco\ntasti",
-            "description": "Blocca i tasti durante la modalità saldatura; tieni premuto entrambi per bloccare o sbloccare [D: disattiva; T: consenti Turbo; C: blocco completo]"
+            "description": "Blocca i tasti durante la modalità saldatura; tieni premuto entrambi per bloccare o sbloccare [T: consenti Turbo; C: blocco completo]"
         },
         "ProfilePhases": {
             "displayText": "Fasi modalità\nprofilo",
@@ -213,7 +213,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Sensibilità\nal movimento",
-            "description": "Imposta la sensibilità al movimento per uscire dalla modalità riposo [0: nessuna; 1: minima; 9: massima]"
+            "description": "Imposta la sensibilità al movimento per uscire dalla modalità riposo [1: minima; 9: massima]"
         },
         "SleepTemperature": {
             "displayText": "Temperatura\nriposo",
@@ -229,7 +229,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Sensore\nHall",
-            "description": "Regola la sensibilità del sensore ad effetto Hall per entrare in modalità riposo [0: nessuna; 1: minima; 9: massima]"
+            "description": "Regola la sensibilità del sensore ad effetto Hall per entrare in modalità riposo [1: minima; 9: massima]"
         },
         "TemperatureUnit": {
             "displayText": "Unità di\ntemperatura",
@@ -253,7 +253,7 @@
         },
         "AnimSpeed": {
             "displayText": "Velocità\nanimazioni",
-            "description": "Imposta la velocità di riproduzione delle animazioni del menù principale [O: OFF; L: lenta; M: media; V: veloce]"
+            "description": "Imposta la velocità di riproduzione delle animazioni del menù principale [L: lenta; M: media; V: veloce]"
         },
         "AnimLoop": {
             "displayText": "Ciclo\nanimazioni",

Translations/translation_JA_JP.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Tip: "
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "オフ"
+            "message": "Preheat"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown"
         },
         "ProfilePreheatString": {
             "message": "Preheat"
@@ -80,15 +83,12 @@
         "SettingRightChar": "右",
         "SettingLeftChar": "左",
         "SettingAutoChar": "自",
-        "SettingOffChar": "×",
         "SettingSlowChar": "遅",
         "SettingMediumChar": "中",
         "SettingFastChar": "速",
-        "SettingStartNoneChar": "×",
         "SettingStartSolderingChar": "熱",
         "SettingStartSleepChar": "待",
         "SettingStartSleepOffChar": "室",
-        "SettingLockDisableChar": "×",
         "SettingLockBoostChar": "ブ",
         "SettingLockFullChar": "全"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "自動加熱",
-            "description": "電源投入時に自動的に加熱する <×=オフ | 熱=半田付けモード | 待=スタンバイモード | 室=室温スタンバイモード>"
+            "description": "電源投入時に自動的に加熱する <熱=半田付けモード | 待=スタンバイモード | 室=室温スタンバイモード>"
         },
         "TempChangeShortStep": {
             "displayText": "温度変化 短",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "ボタンロック",
-            "description": "半田付けモード時に両方のボタンを長押しし、ボタンロックする <×=オフ | ブ=ブーストのみ許可 | 全=すべてをロック>"
+            "description": "半田付けモード時に両方のボタンを長押しし、ボタンロックする <ブ=ブーストのみ許可 | 全=すべてをロック>"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile Phases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat Temp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat Speed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1 Temp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1 Duration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2 Temp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2 Duration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3 Temp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3 Duration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4 Temp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4 Duration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5 Temp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5 Duration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown Speed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profile Phases",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "動きの感度",
-            "description": "0=オフ | 1=最低感度 | ... | 9=最高感度"
+            "description": "1=最低感度 | ... | 9=最高感度"
         },
         "SleepTemperature": {
             "displayText": "待機温度",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "磁界感度",
-            "description": "スタンバイモードに入るのに使用される磁場センサーの感度 <0=オフ | 1=最低感度 | ... | 9=最高感度>"
+            "description": "スタンバイモードに入るのに使用される磁場センサーの感度 <1=最低感度 | ... | 9=最高感度>"
         },
         "TemperatureUnit": {
             "displayText": "温度単位",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "動画の速度",
-            "description": "メニューアイコンのアニメーションの速さ <×=再生しない | 遅=低速 | 中=中速 | 速=高速>"
+            "description": "メニューアイコンのアニメーションの速さ <遅=低速 | 中=中速 | 速=高速>"
         },
         "AnimLoop": {
             "displayText": "動画をループ",

Translations/translation_LT.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Antg: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Išj"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Preheat\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "D",
         "SettingLeftChar": "K",
         "SettingAutoChar": "A",
-        "SettingOffChar": "I",
         "SettingSlowChar": "L",
         "SettingMediumChar": "V",
         "SettingFastChar": "G",
-        "SettingStartNoneChar": "N",
         "SettingStartSolderingChar": "T",
         "SettingStartSleepChar": "M",
         "SettingStartSleepOffChar": "K",
-        "SettingLockDisableChar": "I",
         "SettingLockBoostChar": "T",
         "SettingLockFullChar": "V"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "Automatinis\npaleidimas",
-            "description": "Ar pradėti kaitininti iš karto įjungus lituoklį (N=Ne | T=Taip | M=Miegas | K=Miegoti kambario temperatūroje)"
+            "description": "Ar pradėti kaitininti iš karto įjungus lituoklį (T=Taip | M=Miegas | K=Miegoti kambario temperatūroje)"
         },
         "TempChangeShortStep": {
             "displayText": "Temp.keitim.\ntrump.spust.",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "Mygtukų\nužraktas",
-            "description": "Lituodami, ilgai paspauskite abu mygtukus, kad juos užrakintumėte (I=Išjungta | T=leidžiamas tik Turbo režimas | V=Visiškas užrakinimas)"
+            "description": "Lituodami, ilgai paspauskite abu mygtukus, kad juos užrakintumėte (T=leidžiamas tik Turbo režimas | V=Visiškas užrakinimas)"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile\nPhases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat\nTemp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat\nSpeed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1\nTemp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1\nDuration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2\nTemp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2\nDuration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3\nTemp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3\nDuration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4\nTemp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4\nDuration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5\nTemp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5\nDuration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown\nSpeed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Judesio\njautrumas",
-            "description": "Judesio jautrumas (0=Išjungta | 1=Mažiausias | ... | 9=Didžiausias)"
+            "description": "Judesio jautrumas (1=Mažiausias | ... | 9=Didžiausias)"
         },
         "SleepTemperature": {
             "displayText": "Miego\ntemperat.",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Holo\njutiklis",
-            "description": "Holo jutiklio jautrumas nustatant miegą (0=Išjungta | 1=Mažiausias | ... | 9=Didžiausias)"
+            "description": "Holo jutiklio jautrumas nustatant miegą (1=Mažiausias | ... | 9=Didžiausias)"
         },
         "TemperatureUnit": {
             "displayText": "Temperatūros\nvienetai",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "Animacijų\ngreitis",
-            "description": "Paveiksliukų animacijų greitis meniu punktuose (I=Išjungtas | L=Lėtas | V=Vidutinis | G=Greitas)"
+            "description": "Paveiksliukų animacijų greitis meniu punktuose (L=Lėtas | V=Vidutinis | G=Greitas)"
         },
         "AnimLoop": {
             "displayText": "Animacijų\npakartojimas",

Translations/translation_NB.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Spiss: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Av"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Preheat\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "H",
         "SettingLeftChar": "V",
         "SettingAutoChar": "A",
-        "SettingOffChar": "O",
         "SettingSlowChar": "S",
         "SettingMediumChar": "M",
         "SettingFastChar": "F",
-        "SettingStartNoneChar": "I",
         "SettingStartSolderingChar": "L",
         "SettingStartSleepChar": "D",
         "SettingStartSleepOffChar": "R",
-        "SettingLockDisableChar": "D",
         "SettingLockBoostChar": "B",
         "SettingLockFullChar": "F"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "AStart\n",
-            "description": "Start automatisk med lodding når strøm kobles til. (I=Inaktiv | L=Lodding | D=Dvale | R=Dvale romtemperatur)"
+            "description": "Start automatisk med lodding når strøm kobles til. (L=Lodding | D=Dvale | R=Dvale romtemperatur)"
         },
         "TempChangeShortStep": {
             "displayText": "Temp-endring\nkort",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "Tillat å låse\nknapper",
-            "description": "Mens du lodder, hold nede begge knapper for å bytte mellom låsemodus (D=deaktiver | B=kun boost | F=full lås)"
+            "description": "Mens du lodder, hold nede begge knapper for å bytte mellom låsemodus (B=kun boost | F=full lås)"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile\nPhases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat\nTemp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat\nSpeed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1\nTemp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1\nDuration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2\nTemp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2\nDuration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3\nTemp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3\nDuration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4\nTemp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4\nDuration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5\nTemp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5\nDuration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown\nSpeed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "BSensr\n",
-            "description": "Bevegelsesfølsomhet (0=Inaktiv | 1=Minst følsom | ... | 9=Mest følsom)"
+            "description": "Bevegelsesfølsomhet (1=Minst følsom | ... | 9=Mest følsom)"
         },
         "SleepTemperature": {
             "displayText": "DTmp\n",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Hall-sensor\nfølsomhet",
-            "description": "Sensitiviteten til Hall-effekt-sensoren for å detektere inaktivitet (0=Inaktiv | 1=Minst følsom | ... | 9=Mest følsom)"
+            "description": "Sensitiviteten til Hall-effekt-sensoren for å detektere inaktivitet (1=Minst følsom | ... | 9=Mest følsom)"
         },
         "TemperatureUnit": {
             "displayText": "TmpEnh\n",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "Anim.\nhastighet",
-            "description": "Hastigheten til animasjonene i menyen (O=off | S=slow | M=medium | F=fast)"
+            "description": "Hastigheten til animasjonene i menyen (S=slow | M=medium | F=fast)"
         },
         "AnimLoop": {
             "displayText": "Anim.\nloop",

Translations/translation_NL.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Punt: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Uit"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Voorverwarmen\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "R",
         "SettingLeftChar": "L",
         "SettingAutoChar": "A",
-        "SettingOffChar": "U",
         "SettingSlowChar": "L",
         "SettingMediumChar": "M",
         "SettingFastChar": "S",
-        "SettingStartNoneChar": "U",
         "SettingStartSolderingChar": "T",
         "SettingStartSleepChar": "S",
         "SettingStartSleepOffChar": "Z",
-        "SettingLockDisableChar": "U",
         "SettingLockBoostChar": "B",
         "SettingLockFullChar": "V" 
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "start-\ngedrag",
-            "description": "U=uit | T=verwarm naar soldeer temp | S=standby op slaap temp tot bewogen | Z=standby zonder verwarmen tot bewogen"
+            "description": "T=verwarm naar soldeer temp | S=standby op slaap temp tot bewogen | Z=standby zonder verwarmen tot bewogen"
         },
         "TempChangeShortStep": {
             "displayText": "temp veran-\ndering kort",
@@ -153,7 +153,7 @@
         },
         "LockingMode": {
             "displayText": "Vergrendel-\nings knoppen",
-            "description": "Houd tijdens het solderen beide knoppen ingedrukt om de vergrendeling in of uit te schakelen (U=uit | B=alleen boost-modus | V=volledige vergrendeling)"
+            "description": "Houd tijdens het solderen beide knoppen ingedrukt om de vergrendeling in of uit te schakelen (B=alleen boost-modus | V=volledige vergrendeling)"
         },
         "ProfilePhases": {
             "displayText": "Profiel\nfases",
@@ -213,7 +213,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Bewegings-\ngevoeligheid",
-            "description": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
+            "description": "Bewegingsgevoeligheid (1=minst gevoelig | ... | 9=meest gevoelig)"
         },
         "SleepTemperature": {
             "displayText": "Slaap\ntemp",
@@ -229,7 +229,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Hall sensor\ngevoeligheid",
-            "description": "Gevoeligheid naar de magneten (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
+            "description": "Gevoeligheid naar de magneten (1=minst gevoelig | ... | 9=meest gevoelig)"
         },
         "TemperatureUnit": {
             "displayText": "Temperatuur\neenheid",
@@ -253,7 +253,7 @@
         },
         "AnimSpeed": {
             "displayText": "Anim.\nsnelheid",
-            "description": "Snelheid van de icoon animaties in het menu (Uit | Langzaam | Middel | Snel)"
+            "description": "Snelheid van de icoon animaties in het menu (Langzaam | Middel | Snel)"
         },
         "AnimLoop": {
             "displayText": "Anim.\nherhaling",

Translations/translation_NL_BE.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Punt: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Uit"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Preheat\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "R",
         "SettingLeftChar": "L",
         "SettingAutoChar": "A",
-        "SettingOffChar": "O",
         "SettingSlowChar": "T",
         "SettingMediumChar": "M",
         "SettingFastChar": "S",
-        "SettingStartNoneChar": "F",
         "SettingStartSolderingChar": "T",
         "SettingStartSleepChar": "S",
         "SettingStartSleepOffChar": "K",
-        "SettingLockDisableChar": "D",
         "SettingLockBoostChar": "B",
         "SettingLockFullChar": "F"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "start-\ntemperatuur",
-            "description": "Breng de soldeerbout op temperatuur bij het opstarten. (F=Uit | T=Soldeertemperatuur | S=Slaapstand-temperatuur | K=Slaapstand kamertemperatuur)"
+            "description": "Breng de soldeerbout op temperatuur bij het opstarten. (T=Soldeertemperatuur | S=Slaapstand-temperatuur | K=Slaapstand kamertemperatuur)"
         },
         "TempChangeShortStep": {
             "displayText": "temp veran\ndering kort",
@@ -153,7 +153,7 @@
         },
         "LockingMode": {
             "displayText": "Vergrendel-\ning knoppen",
-            "description": "Houd tijdens het solderen beide knoppen ingedrukt om de vergrendeling in of uit te schakelen (D=uit | B=alleen boost-modus | F=volledige vergrendeling)"
+            "description": "Houd tijdens het solderen beide knoppen ingedrukt om de vergrendeling in of uit te schakelen (B=alleen boost-modus | F=volledige vergrendeling)"
         },
         "ProfilePhases": {
             "displayText": "Profiel\nfases",
@@ -213,7 +213,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Bewegings-\ngevoeligheid",
-            "description": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
+            "description": "Bewegingsgevoeligheid (1=minst gevoelig | ... | 9=meest gevoelig)"
         },
         "SleepTemperature": {
             "displayText": "Slaap\ntemp",
@@ -229,7 +229,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Hall sensor\ngevoeligheid",
-            "description": "Gevoeligheid naar de magneten (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
+            "description": "Gevoeligheid naar de magneten (1=minst gevoelig | ... | 9=meest gevoelig)"
         },
         "TemperatureUnit": {
             "displayText": "Temperatuur\nschaal",
@@ -253,7 +253,7 @@
         },
         "AnimSpeed": {
             "displayText": "Anim.\nsnelheid",
-            "description": "Snelheid van de icoon animaties in het menu (O=uit | T=sloom | M=middel | S=snel)"
+            "description": "Snelheid van de icoon animaties in het menu (T=sloom | M=middel | S=snel)"
         },
         "AnimLoop": {
             "displayText": "Anim.\nherhaling",

Translations/translation_PL.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Grot: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Wył"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Preheat\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "P",
         "SettingLeftChar": "L",
         "SettingAutoChar": "A",
-        "SettingOffChar": "O",
         "SettingSlowChar": "W",
         "SettingMediumChar": "M",
         "SettingFastChar": "S",
-        "SettingStartNoneChar": "B",
         "SettingStartSolderingChar": "T",
         "SettingStartSleepChar": "Z",
         "SettingStartSleepOffChar": "O",
-        "SettingLockDisableChar": "W",
         "SettingLockBoostChar": "B",
         "SettingLockFullChar": "P"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "Aut. uruch.\ntr. lutowania",
-            "description": "Automatyczne uruchamianie trybu lutowania po włączeniu zasilania. (B: wyłączone | T: lutowanie | Z: uśpienie | O: uśpienie w temp. pokojowej)"
+            "description": "Automatyczne uruchamianie trybu lutowania po włączeniu zasilania. (T: lutowanie | Z: uśpienie | O: uśpienie w temp. pokojowej)"
         },
         "TempChangeShortStep": {
             "displayText": "Zm. temp.\nkr. przyc.",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "Blokada\nprzycisków",
-            "description": "W trybie lutowania, wciśnij oba przyciski aby je zablokować (O=Wyłączona | B=tylko Boost | P=pełna blokada)"
+            "description": "W trybie lutowania, wciśnij oba przyciski aby je zablokować (B=tylko Boost | P=pełna blokada)"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile\nPhases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat\nTemp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat\nSpeed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1\nTemp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1\nDuration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2\nTemp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2\nDuration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3\nTemp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3\nDuration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4\nTemp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4\nDuration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5\nTemp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5\nDuration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown\nSpeed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Czułość\nwykr. ruchu",
-            "description": "Czułość wykrywania ruchu (0: Wyłączona | 1: Minimalna | ... | 9: Maksymalna)"
+            "description": "Czułość wykrywania ruchu (1: Minimalna | ... | 9: Maksymalna)"
         },
         "SleepTemperature": {
             "displayText": "Temp.\nuśpienia",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Czułość\ncz. Halla",
-            "description": "Czułość czujnika Halla, używanego do przechodznia w tryb uśpienia (0: Wyłączona | 1: Minimalna | ... | 9: Maksymalna)"
+            "description": "Czułość czujnika Halla, używanego do przechodznia w tryb uśpienia (1: Minimalna | ... | 9: Maksymalna)"
         },
         "TemperatureUnit": {
             "displayText": "Jednostka\ntemperatury",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "Prędkosć\nanimacji",
-            "description": "Prędkość animacji ikon w menu (O: wył. | W: mała | M: średnia | S: duża)"
+            "description": "Prędkość animacji ikon w menu (W: mała | M: średnia | S: duża)"
         },
         "AnimLoop": {
             "displayText": "Zapętlona\nanimacja",

Translations/translation_PT.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Ponta: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Off"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Preheat\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "D",
         "SettingLeftChar": "C",
         "SettingAutoChar": "A",
-        "SettingOffChar": "O",
         "SettingSlowChar": "S",
         "SettingMediumChar": "M",
         "SettingFastChar": "F",
-        "SettingStartNoneChar": "D",
         "SettingStartSolderingChar": "S",
         "SettingStartSleepChar": "H",
         "SettingStartSleepOffChar": "A",
-        "SettingLockDisableChar": "D",
         "SettingLockBoostChar": "B",
         "SettingLockFullChar": "F"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "Aquecimento\nautomático",
-            "description": "Aquece a ponta automaticamente ao ligar (D=desligar | S=soldagem | H=hibernar | A=hibernar temp. ambiente)"
+            "description": "Aquece a ponta automaticamente ao ligar (S=soldagem | H=hibernar | A=hibernar temp. ambiente)"
         },
         "TempChangeShortStep": {
             "displayText": "Mudança temp.\ncurta",
@@ -153,7 +153,7 @@
         },
         "LockingMode": {
             "displayText": "Permitir bloquear\nbotões",
-            "description": "Durante a solda premir os dois botões para alternar entre (D=desativados | B=modo turbo | F=bloqueio total)"
+            "description": "Durante a solda premir os dois botões para alternar entre (B=modo turbo | F=bloqueio total)"
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
@@ -213,7 +213,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Sensibilidade\nmovimento",
-            "description": "Sensibilidade ao movimento (0=Desligado | 1=Menor | ... | 9=Maior)"
+            "description": "Sensibilidade ao movimento (1=Menor | ... | 9=Maior)"
         },
         "SleepTemperature": {
             "displayText": "Temperatura\nrepouso",
@@ -229,7 +229,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Sensibilidade de\nmagnetismo",
-            "description": "Sensibilidade de magnetismo (0=Desligado | 1=Menor | ... | 9=Maior)"
+            "description": "Sensibilidade de magnetismo (1=Menor | ... | 9=Maior)"
         },
         "TemperatureUnit": {
             "displayText": "Unidade\ntemperatura",
@@ -253,7 +253,7 @@
         },
         "AnimSpeed": {
             "displayText": "Velocidade de\nanimação",
-            "description": "Velocidade das animações no menu (O=off | S=lenta | M=média | F=rápida)"
+            "description": "Velocidade das animações no menu (S=lenta | M=média | F=rápida)"
         },
         "AnimLoop": {
             "displayText": "Repetir\nanimações",

Translations/translation_RO.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Tip: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Nu"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Preheat\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "D",
         "SettingLeftChar": "S",
         "SettingAutoChar": "A",
-        "SettingOffChar": "O",
         "SettingSlowChar": "Î",
         "SettingMediumChar": "M",
         "SettingFastChar": "R",
-        "SettingStartNoneChar": "O",
         "SettingStartSolderingChar": "S",
         "SettingStartSleepChar": "Z",
         "SettingStartSleepOffChar": "R",
-        "SettingLockDisableChar": "D",
         "SettingLockBoostChar": "B",
         "SettingLockFullChar": "F"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "Auto\nstart",
-            "description": "Start letcon în modul de lipire la pornire (O=oprit | S=lipire | Z=repaus | R=repaus la temperatura camerei)"
+            "description": "Start letcon în modul de lipire la pornire (S=lipire | Z=repaus | R=repaus la temperatura camerei)"
         },
         "TempChangeShortStep": {
             "displayText": "Schimbare temp.\napăsare scută",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "Blocare\nbutoane",
-            "description": "Când lipiţi, apăsaţi lung ambele butoane, pentru a le bloca (D=dezactivare | B=numai \"modul boost\" | F=blocare completă)"
+            "description": "Când lipiţi, apăsaţi lung ambele butoane, pentru a le bloca (B=numai \"modul boost\" | F=blocare completă)"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile\nPhases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat\nTemp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat\nSpeed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1\nTemp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1\nDuration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2\nTemp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2\nDuration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3\nTemp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3\nDuration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4\nTemp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4\nDuration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5\nTemp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5\nDuration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown\nSpeed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Sensibilitate\nla miscare",
-            "description": "Sensibilitate senzor miscare (0=oprit | 1=puţin sensibil | ... | 9=cel mai sensibil)"
+            "description": "Sensibilitate senzor miscare (1=puţin sensibil | ... | 9=cel mai sensibil)"
         },
         "SleepTemperature": {
             "displayText": "Temp\nrepaus",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Sensibilitate\nsenzor Hall",
-            "description": "Sensibilitate senzor cu efect Hall pentru a detecta repausul (0=oprit | 1=putin sensibil | ... | 9=cel mai sensibil)"
+            "description": "Sensibilitate senzor cu efect Hall pentru a detecta repausul (1=putin sensibil | ... | 9=cel mai sensibil)"
         },
         "TemperatureUnit": {
             "displayText": "Unitate de\ntemperatură",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "Animaţii\nviteză",
-            "description": "Ritmul animaţiilor pictogramei din meniu (O=oprit | Î=încet | M=mediu | R=rapid)"
+            "description": "Ritmul animaţiilor pictogramei din meniu (Î=încet | M=mediu | R=rapid)"
         },
         "AnimLoop": {
             "displayText": "Animaţii\nbuclă",

Translations/translation_RU.json

@@ -60,9 +60,6 @@
         "SleepingTipAdvancedString": {
             "message": "Жало: \n"
         },
-        "OffString": {
-            "message": "Выкл"
-        },
         "ProfilePreheatString": {
             "message": "Преднагрев\n"
         },
@@ -80,15 +77,12 @@
         "SettingRightChar": "П",
         "SettingLeftChar": "Л",
         "SettingAutoChar": "А",
-        "SettingOffChar": "О",
         "SettingSlowChar": "М",
         "SettingMediumChar": "С",
         "SettingFastChar": "Б",
-        "SettingStartNoneChar": "О",
         "SettingStartSolderingChar": "П",
         "SettingStartSleepChar": "С",
         "SettingStartSleepOffChar": "К",
-        "SettingLockDisableChar": "О",
         "SettingLockBoostChar": "Т",
         "SettingLockFullChar": "П"
     },
@@ -141,7 +135,7 @@
         },
         "AutoStart": {
             "displayText": "Режим при\nвключении",
-            "description": "Режим, в котором включается паяльник (О=Откл. | П=Пайка | С=Сон | К=Ожидание при комн. темп.)"
+            "description": "Режим, в котором включается паяльник (П=Пайка | С=Сон | К=Ожидание при комн. темп.)"
         },
         "TempChangeShortStep": {
             "displayText": "Шаг t° при\nкор.наж-ии",
@@ -153,7 +147,7 @@
         },
         "LockingMode": {
             "displayText": "Разрешить\nблок. кнопок",
-            "description": "Блокировать кнопки при их долгом нажатии в режиме пайки (О=Откл. | Т=Только турбо | П=Полная блокировка)"
+            "description": "Блокировать кнопки при их долгом нажатии в режиме пайки (Т=Только турбо | П=Полная блокировка)"
         },
         "ProfilePhases": {
             "displayText": "Этапы\nпрофиля",
@@ -213,7 +207,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Чувствительн.\nакселерометра",
-            "description": "Чувствительность акселерометра (0=Откл. | 1=мин. | ... | 9=макс.)"
+            "description": "Чувствительность акселерометра (1=мин. | ... | 9=макс.)"
         },
         "SleepTemperature": {
             "displayText": "t° при\nсне",
@@ -229,7 +223,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Датчик\nХолла",
-            "description": "Чувствительность датчика Холла к магнитному полю (0=Откл. | 1=мин. | ... | 9=макс.)"
+            "description": "Чувствительность датчика Холла к магнитному полю (1=мин. | ... | 9=макс.)"
         },
         "TemperatureUnit": {
             "displayText": "Единицы\nизмерения",
@@ -253,7 +247,7 @@
         },
         "AnimSpeed": {
             "displayText": "Скорость\nанимации",
-            "description": "Скорость анимации иконок в главном меню (О=Откл. | М=Медленная| С=Средняя | Б=Быстрая)"
+            "description": "Скорость анимации иконок в главном меню (М=Медленная| С=Средняя | Б=Быстрая)"
         },
         "AnimLoop": {
             "displayText": "Зацикленная\nанимация",

Translations/translation_SK.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Hrot: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Vyp"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Predhrievanie\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "P",
         "SettingLeftChar": "L",
         "SettingAutoChar": "A",
-        "SettingOffChar": "Z",
         "SettingSlowChar": "P",
         "SettingMediumChar": "S",
         "SettingFastChar": "R",
-        "SettingStartNoneChar": "V",
         "SettingStartSolderingChar": "Z",
         "SettingStartSleepChar": "S",
         "SettingStartSleepOffChar": "I",
-        "SettingLockDisableChar": "Z",
         "SettingLockBoostChar": "B",
         "SettingLockFullChar": "P"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "Automatické\nspustenie",
-            "description": "Pri štarte spustiť režim spájkovania (V=Vyp | Z=Spájkovanie | S=Spanok | I=Spanok izbová teplota)"
+            "description": "Pri štarte spustiť režim spájkovania (Z=Spájkovanie | S=Spanok | I=Spanok izbová teplota)"
         },
         "TempChangeShortStep": {
             "displayText": "Malý krok\nteploty",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "Povoliť zámok\ntlačidiel",
-            "description": "Zamknutie tlačidiel - dlhé stlačenie oboch naraz počas spájkovania (Z=Zakázať | B=Okrem boost | P=Plné zamknutie)"
+            "description": "Zamknutie tlačidiel - dlhé stlačenie oboch naraz počas spájkovania (B=Okrem boost | P=Plné zamknutie)"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile\nPhases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat\nTemp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat\nSpeed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1\nTemp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1\nDuration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2\nTemp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2\nDuration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3\nTemp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3\nDuration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4\nTemp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4\nDuration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5\nTemp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5\nDuration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown\nSpeed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profilové\nFázy",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Citlivosť\npohybu",
-            "description": "Citlivosť detekcie pohybu (0=Vyp | 1=Min | ... | 9=Max)"
+            "description": "Citlivosť detekcie pohybu (1=Min | ... | 9=Max)"
         },
         "SleepTemperature": {
             "displayText": "Pokojová\nteplota",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Citliv.\nHall",
-            "description": "Citlivosť Hallovho senzora pre detekciu spánku (0=Vyp | 1=Min | ... | 9=Max)"
+            "description": "Citlivosť Hallovho senzora pre detekciu spánku (1=Min | ... | 9=Max)"
         },
         "TemperatureUnit": {
             "displayText": "Jednotka\nteploty",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "Rýchlosť\nanimácií",
-            "description": "Rýchlosť animácií ikoniek v menu (O=off | P=pomaly | S=stredne | R=rýchlo)"
+            "description": "Rýchlosť animácií ikoniek v menu (P=pomaly | S=stredne | R=rýchlo)"
         },
         "AnimLoop": {
             "displayText": "Opakovanie\nanimácií",

Translations/translation_SL.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Konica \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Off"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Preheat\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "D",
         "SettingLeftChar": "L",
         "SettingAutoChar": "S",
-        "SettingOffChar": "U",
         "SettingSlowChar": "P",
         "SettingMediumChar": "M",
         "SettingFastChar": "H",
-        "SettingStartNoneChar": "U",
         "SettingStartSolderingChar": "S",
         "SettingStartSleepChar": "Z",
         "SettingStartSleepOffChar": "V",
-        "SettingLockDisableChar": "O",
         "SettingLockBoostChar": "L",
         "SettingLockFullChar": "P"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "Samodejni\nzagon",
-            "description": "Samodejno gretje konice ob vklopu (U=ugasnjeno | S=spajkanje | Z=spanje | V=spanje na sobni temperaturi)"
+            "description": "Samodejno gretje konice ob vklopu (S=spajkanje | Z=spanje | V=spanje na sobni temperaturi)"
         },
         "TempChangeShortStep": {
             "displayText": "Kratka sprememba\ntemperature?",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "Omogoči\nzaklep gumbov",
-            "description": "Za zaklep med spajkanjem drži oba gumba (O=onemogoči | L=le pospešeno | P=polno)"
+            "description": "Za zaklep med spajkanjem drži oba gumba (L=le pospešeno | P=polno)"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile\nPhases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat\nTemp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat\nSpeed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1\nTemp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1\nDuration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2\nTemp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2\nDuration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3\nTemp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3\nDuration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4\nTemp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4\nDuration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5\nTemp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5\nDuration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown\nSpeed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Občutljivost\npremikanja",
-            "description": "0=izklopljeno | 1=najmanjša | ... | 9=največja"
+            "description": "1=najmanjša | ... | 9=največja"
         },
         "SleepTemperature": {
             "displayText": "Temp. med\nspanjem",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Občut.\nHall son",
-            "description": "Občutljivost Hallove sonde za zaznavanje spanja (0=izklopljeno | 1=najmanjša | ... | 9=največja)"
+            "description": "Občutljivost Hallove sonde za zaznavanje spanja (1=najmanjša | ... | 9=največja)"
         },
         "TemperatureUnit": {
             "displayText": "Enota za\ntemperaturo",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "Anim.\nspeed",
-            "description": "Pace of icon animations in menu (O=off | P=slow | M=medium | H=fast)"
+            "description": "Pace of icon animations in menu (P=slow | M=medium | H=fast)"
         },
         "AnimLoop": {
             "displayText": "Anim.\nloop",

Translations/translation_SR_CYRL.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Врх: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Иск"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Preheat\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "Д",
         "SettingLeftChar": "Л",
         "SettingAutoChar": "А",
-        "SettingOffChar": "O",
         "SettingSlowChar": "С",
         "SettingMediumChar": "M",
         "SettingFastChar": "Б",
-        "SettingStartNoneChar": "И",
         "SettingStartSolderingChar": "Л",
         "SettingStartSleepChar": "С",
         "SettingStartSleepOffChar": "X",
-        "SettingLockDisableChar": "D",
         "SettingLockBoostChar": "B",
         "SettingLockFullChar": "F"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "Врући\nстарт",
-            "description": "Лемилица одмах по покретању прелази у режим лемљења и греје се. (И=искључити | Л=лемљење | С=спавати | X=спавати собна температура)"
+            "description": "Лемилица одмах по покретању прелази у режим лемљења и греје се. (Л=лемљење | С=спавати | X=спавати собна температура)"
         },
         "TempChangeShortStep": {
             "displayText": "Temp change\nshort",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "Allow locking\nbuttons",
-            "description": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+            "description": "While soldering, hold down both buttons to toggle locking them (B=boost mode only | F=full locking)"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile\nPhases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat\nTemp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat\nSpeed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1\nTemp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1\nDuration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2\nTemp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2\nDuration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3\nTemp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3\nDuration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4\nTemp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4\nDuration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5\nTemp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5\nDuration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown\nSpeed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Осетљивост\nна покрет",
-            "description": "Осетљивост сензора покрета. (0=искључено | 1=најмање осетљиво | ... | 9=најосетљивије)"
+            "description": "Осетљивост сензора покрета. (1=најмање осетљиво | ... | 9=најосетљивије)"
         },
         "SleepTemperature": {
             "displayText": "Темп.\nспавања",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Hall sensor\nsensitivity",
-            "description": "Sensitivity to magnets (0=искључено | 1=најмање осетљиво | ... | 9=најосетљивије)"
+            "description": "Sensitivity to magnets (1=најмање осетљиво | ... | 9=најосетљивије)"
         },
         "TemperatureUnit": {
             "displayText": "Јединица\nтемпературе",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "Anim.\nspeed",
-            "description": "Pace of icon animations in menu (O=off | С=slow | M=medium | Б=fast)"
+            "description": "Pace of icon animations in menu (С=slow | M=medium | Б=fast)"
         },
         "AnimLoop": {
             "displayText": "Anim.\nloop",

Translations/translation_SR_LATN.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Vrh: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Isk"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Preheat\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "D",
         "SettingLeftChar": "L",
         "SettingAutoChar": "A",
-        "SettingOffChar": "O",
         "SettingSlowChar": "S",
         "SettingMediumChar": "M",
         "SettingFastChar": "B",
-        "SettingStartNoneChar": "I",
         "SettingStartSolderingChar": "L",
         "SettingStartSleepChar": "S",
         "SettingStartSleepOffChar": "X",
-        "SettingLockDisableChar": "D",
         "SettingLockBoostChar": "B",
         "SettingLockFullChar": "F"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "Vrući\nstart",
-            "description": "Lemilica odmah po pokretanju prelazi u režim lemljenja i greje se. (I=isključiti | L=lemljenje | S=spavati | X=spavati sobna temperatura)"
+            "description": "Lemilica odmah po pokretanju prelazi u režim lemljenja i greje se. (L=lemljenje | S=spavati | X=spavati sobna temperatura)"
         },
         "TempChangeShortStep": {
             "displayText": "Temp change\nshort",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "Allow locking\nbuttons",
-            "description": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+            "description": "While soldering, hold down both buttons to toggle locking them (B=boost mode only | F=full locking)"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile\nPhases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat\nTemp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat\nSpeed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1\nTemp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1\nDuration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2\nTemp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2\nDuration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3\nTemp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3\nDuration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4\nTemp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4\nDuration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5\nTemp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5\nDuration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown\nSpeed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Osetljivost\nna pokret",
-            "description": "Osetljivost senzora pokreta. (0=isključeno | 1=najmanje osetljivo | ... | 9=najosetljivije)"
+            "description": "Osetljivost senzora pokreta. (1=najmanje osetljivo | ... | 9=najosetljivije)"
         },
         "SleepTemperature": {
             "displayText": "Temp.\nspavanja",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Hall sensor\nsensitivity",
-            "description": "Sensitivity to magnets (0=isključeno | 1=najmanje osetljivo | ... | 9=najosetljivije)"
+            "description": "Sensitivity to magnets (1=najmanje osetljivo | ... | 9=najosetljivije)"
         },
         "TemperatureUnit": {
             "displayText": "Jedinica\ntemperature",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "Anim.\nspeed",
-            "description": "Pace of icon animations in menu (O=off | S=slow | M=medium | B=fast)"
+            "description": "Pace of icon animations in menu (S=slow | M=medium | B=fast)"
         },
         "AnimLoop": {
             "displayText": "Anim.\nloop",

Translations/translation_SV.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Spets: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Av"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Förvärmning\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "H",
         "SettingLeftChar": "V",
         "SettingAutoChar": "A",
-        "SettingOffChar": "A",
         "SettingSlowChar": "L",
         "SettingMediumChar": "M",
         "SettingFastChar": "S",
-        "SettingStartNoneChar": "A",
         "SettingStartSolderingChar": "L",
         "SettingStartSleepChar": "V",
         "SettingStartSleepOffChar": "R",
-        "SettingLockDisableChar": "A",
         "SettingLockBoostChar": "T",
         "SettingLockFullChar": "F"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "Auto\nstart",
-            "description": "Startar automatiskt lödpennan vid uppstart. (A=Av | L=Lödning | V=Viloläge | R=Viloläge Rumstemperatur)"
+            "description": "Startar automatiskt lödpennan vid uppstart. (L=Lödning | V=Viloläge | R=Viloläge Rumstemperatur)"
         },
         "TempChangeShortStep": {
             "displayText": "Temp.just\nkorttryck",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "Tillåt lås\nvia knappar",
-            "description": "Vid lödning, håll nere bägge knappar för att slå på lås (A=Av | T=Bara turbo | F=Fullt lås)"
+            "description": "Vid lödning, håll nere bägge knappar för att slå på lås (T=Bara turbo | F=Fullt lås)"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile\nPhases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat\nTemp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat\nSpeed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1\nTemp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1\nDuration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2\nTemp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2\nDuration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3\nTemp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3\nDuration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4\nTemp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4\nDuration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5\nTemp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5\nDuration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown\nSpeed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profil-\nfaser",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Rörelse-\nkänslighet",
-            "description": "Rörelsekänslighet (0=Av | 1=minst känslig | ... | 9=mest känslig)"
+            "description": "Rörelsekänslighet (1=minst känslig | ... | 9=mest känslig)"
         },
         "SleepTemperature": {
             "displayText": "Vilo-\ntemp",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Sensor-\nkänslght",
-            "description": "Känslighet för halleffekt-sensorn för viloläges-detektering (0=Av | 1=minst känslig | ... | 9=mest känslig)"
+            "description": "Känslighet för halleffekt-sensorn för viloläges-detektering (1=minst känslig | ... | 9=mest känslig)"
         },
         "TemperatureUnit": {
             "displayText": "Temperatur-\nenheter",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "Anim.-\nhastighet",
-            "description": "Animationshastighet för ikoner i menyer (A=av | L=långsam | M=medel | S=snabb)"
+            "description": "Animationshastighet för ikoner i menyer (L=långsam | M=medel | S=snabb)"
         },
         "AnimLoop": {
             "displayText": "Anim.\nloop",

Translations/translation_TR.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Uç: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Kapalı"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Preheat\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "R",
         "SettingLeftChar": "L",
         "SettingAutoChar": "O",
-        "SettingOffChar": "K",
         "SettingSlowChar": "Y",
         "SettingMediumChar": "O",
         "SettingFastChar": "H",
-        "SettingStartNoneChar": "K",
         "SettingStartSolderingChar": "L",
         "SettingStartSleepChar": "U",
         "SettingStartSleepOffChar": "S",
-        "SettingLockDisableChar": "K",
         "SettingLockBoostChar": "B",
         "SettingLockFullChar": "F"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "OTOBAŞ\n",
-            "description": "Güç verildiğinde otomatik olarak lehimleme modunda başlat. (K=Kapalı | L=Lehimleme Modu | U=Uyku Modu | S=Uyku Modu Oda Sıcaklığı)"
+            "description": "Güç verildiğinde otomatik olarak lehimleme modunda başlat. (L=Lehimleme Modu | U=Uyku Modu | S=Uyku Modu Oda Sıcaklığı)"
         },
         "TempChangeShortStep": {
             "displayText": "Temp change\nshort",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "Allow locking\nbuttons",
-            "description": "While soldering, hold down both buttons to toggle locking them (K=Kapalı | B=boost mode only | F=full locking)"
+            "description": "While soldering, hold down both buttons to toggle locking them (B=boost mode only | F=full locking)"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile\nPhases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat\nTemp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat\nSpeed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1\nTemp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1\nDuration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2\nTemp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2\nDuration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3\nTemp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3\nDuration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4\nTemp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4\nDuration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5\nTemp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5\nDuration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown\nSpeed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "HARHAS\n",
-            "description": "Hareket Hassasiyeti (0=Kapalı | 1=En az duyarlı | ... | 9=En duyarlı)"
+            "description": "Hareket Hassasiyeti (1=En az duyarlı | ... | 9=En duyarlı)"
         },
         "SleepTemperature": {
             "displayText": "BKSC\n",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Hall sensor\nsensitivity",
-            "description": "Sensitivity to magnets (0=Kapalı | 1=En az duyarlı | ... | 9=En duyarlı)"
+            "description": "Sensitivity to magnets (1=En az duyarlı | ... | 9=En duyarlı)"
         },
         "TemperatureUnit": {
             "displayText": "SCKBRM\n",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "Anim.\nspeed",
-            "description": "Pace of icon animations in menu (K=Kapalı | Y=Yavaş | O=Orta | H=Hızlı)"
+            "description": "Pace of icon animations in menu (Y=Yavaş | O=Orta | H=Hızlı)"
         },
         "AnimLoop": {
             "displayText": "Anim.\nloop",

Translations/translation_UK.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Жало: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Вимк"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Попередній\nрозігрів"
@@ -80,15 +83,12 @@
         "SettingRightChar": "П",
         "SettingLeftChar": "Л",
         "SettingAutoChar": "A",
-        "SettingOffChar": "B",
         "SettingSlowChar": "Н",
         "SettingMediumChar": "С",
         "SettingFastChar": "М",
-        "SettingStartNoneChar": "В",
         "SettingStartSolderingChar": "П",
         "SettingStartSleepChar": "О",
         "SettingStartSleepOffChar": "К",
-        "SettingLockDisableChar": "В",
         "SettingLockBoostChar": "Т",
         "SettingLockFullChar": "П"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "Гарячий\nстарт",
-            "description": "Режим в якому запускається паяльник при ввімкненні (В=Вимк. | П=Пайка | О=Очікування | К=Очікування при кімн. темп.)"
+            "description": "Режим в якому запускається паяльник при ввімкненні (П=Пайка | О=Очікування | К=Очікування при кімн. темп.)"
         },
         "TempChangeShortStep": {
             "displayText": "Зміна темп.\nкоротко?",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "Дозволити\nблок. кнопок",
-            "description": "Під час пайки тривале натискання обох кнопок заблокує їх (В=Вимк | Т=Тільки турбо | П=Повне)"
+            "description": "Під час пайки тривале натискання обох кнопок заблокує їх (Т=Тільки турбо | П=Повне)"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile\nPhases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat\nTemp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat\nSpeed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1\nTemp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1\nDuration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2\nTemp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2\nDuration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3\nTemp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3\nDuration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4\nTemp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4\nDuration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5\nTemp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5\nDuration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown\nSpeed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Етапи\nпрофілів",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Чутливість\nсенсору руху",
-            "description": "Акселерометр (0=Вимк. | 1=мін. чутливості | ... | 9=макс. чутливості)"
+            "description": "Акселерометр (1=мін. чутливості | ... | 9=макс. чутливості)"
         },
         "SleepTemperature": {
             "displayText": "Темпер.\nсну",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "Чутливість\nЕфекту Холла",
-            "description": "Чутливість датчика ефекту Холла при виявленні сну (0=Вимк. | 1=мін. чутливості | ... | 9=макс. чутливості)"
+            "description": "Чутливість датчика ефекту Холла при виявленні сну (1=мін. чутливості | ... | 9=макс. чутливості)"
         },
         "TemperatureUnit": {
             "displayText": "Формат темпе-\nратури(C°/F°)",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "Швидкість\nанімації",
-            "description": "Швидкість анімації іконок у головному меню (В=Вимк | Н=Низькa | С=Середня | М=Максимальна)"
+            "description": "Швидкість анімації іконок у головному меню (Н=Низькa | С=Середня | М=Максимальна)"
         },
         "AnimLoop": {
             "displayText": "Циклічна\nанімація",

Translations/translation_VI.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Meo: \n"
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "Tat"
+            "message": "Preheat\n"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown\n"
         },
         "ProfilePreheatString": {
             "message": "Preheat\n"
@@ -80,15 +83,12 @@
         "SettingRightChar": "R",
         "SettingLeftChar": "L",
         "SettingAutoChar": "A",
-        "SettingOffChar": "O",
         "SettingSlowChar": "S",
         "SettingMediumChar": "M",
         "SettingFastChar": "F",
-        "SettingStartNoneChar": "O",
         "SettingStartSolderingChar": "S",
         "SettingStartSleepChar": "Z",
         "SettingStartSleepOffChar": "R",
-        "SettingLockDisableChar": "D",
         "SettingLockBoostChar": "B",
         "SettingLockFullChar": "F"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "Nhiet đo\nđang tăng",
-            "description": "- O=tat | S=nhiet đo hàn | Z=cho o nhiet đo ngu đen khi cu đong | R=cho mà không gia nhiet đen khi cu đong"
+            "description": "S=nhiet đo hàn | Z=cho o nhiet đo ngu đen khi cu đong | R=cho mà không gia nhiet đen khi cu đong"
         },
         "TempChangeShortStep": {
             "displayText": "Thay đoi n.đo\nan nút nhanh",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "Cho phép khóa\ncác nút",
-            "description": "Trong khi hàn, giu ca 2 nút đe khóa(D=tat | B=chi che đo tăng cuong | F=khóa hoàn toàn)"
+            "description": "Trong khi hàn, giu ca 2 nút đe khóa (B=chi che đo tăng cuong | F=khóa hoàn toàn)"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile\nPhases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat\nTemp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat\nSpeed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1\nTemp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1\nDuration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2\nTemp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2\nDuration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3\nTemp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3\nDuration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4\nTemp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4\nDuration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5\nTemp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5\nDuration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown\nSpeed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "Cam bien\ncu đong",
-            "description": "- 0=tat | 1=đo nhay thap nhat| ... | 9=đo nhay cao nhat"
+            "description": "1=đo nhay thap nhat| ... | 9=đo nhay cao nhat"
         },
         "SleepTemperature": {
             "displayText": "Nhiet đo\nkhi ngu",
@@ -221,15 +277,15 @@
         },
         "SleepTimeout": {
             "displayText": "Ngu\nsau",
-            "description": "- thoi gian truoc khi \"Che đo ngu\" bat đau (s=giây | m=phút)"
+            "description": "thoi gian truoc khi \"Che đo ngu\" bat đau (s=giây | m=phút)"
         },
         "ShutdownTimeout": {
             "displayText": "Tat\nsau",
-            "description": "- khoang thoi gian truoc khi tay hàn tat (m=phút)"
+            "description": "khoang thoi gian truoc khi tay hàn tat (m=phút)"
         },
         "HallEffSensitivity": {
             "displayText": "Hall\nđo nhay",
-            "description": "Đo nhay cam bien Hall đe phát hien che đo ngu (0=tat | 1=ít nhay nhat |...| 9=nhay nhat)"
+            "description": "Đo nhay cam bien Hall đe phát hien che đo ngu (1=ít nhay nhat |...| 9=nhay nhat)"
         },
         "TemperatureUnit": {
             "displayText": "Đon vi\nnhiet đo",
@@ -237,11 +293,11 @@
         },
         "DisplayRotation": {
             "displayText": "Huong\nhien thi",
-            "description": "- R=huong tay phai | L=huong tay trái | A=tu đong"
+            "description": "R=huong tay phai | L=huong tay trái | A=tu đong"
         },
         "CooldownBlink": {
             "displayText": "Nguoi đi\nchop mat",
-            "description": "-Nhap nháy nhiet đo sau khi viec gia nhiet tam dung trong khi mui hàn van nóng"
+            "description": "Nhap nháy nhiet đo sau khi viec gia nhiet tam dung trong khi mui hàn van nóng"
         },
         "ScrollingSpeed": {
             "displayText": "Toc đo\ncuon",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "Toc đo\nhoat anh",
-            "description": "-Toc đo cua hoat anh menu (O=tat | S=cham | M=trung bình | F=nhanh)"
+            "description": "Toc đo cua hoat anh menu (S=cham | M=trung bình | F=nhanh)"
         },
         "AnimLoop": {
             "displayText": "Hoat anh\nlap lai",
@@ -261,11 +317,11 @@
         },
         "Brightness": {
             "displayText": "Đo tuong phan\nmàn hình",
-            "description": "-Đieu chinh đo sáng màn hình OLED"
+            "description": "Đieu chinh đo sáng màn hình OLED"
         },
         "ColourInversion": {
             "displayText": "Đao nguoc màu\nmàn hình",
-            "description": "-Đao nguoc màu màn hình OLED"
+            "description": "Đao nguoc màu màn hình OLED"
         },
         "LOGOTime": {
             "displayText": "Boot logo\nduration",
@@ -273,11 +329,11 @@
         },
         "AdvancedIdle": {
             "displayText": "Chi tiet\nmàn hình cho",
-            "description": "- hien thi thông tin chi tiet bang phông chu nho hon trên màn hình cho"
+            "description": "hien thi thông tin chi tiet bang phông chu nho hon trên màn hình cho"
         },
         "AdvancedSoldering": {
             "displayText": "Chi tiet\nmàn hình hàn",
-            "description": "-Hien thi thông tin bang phông chu nho hon trên màn hình hàn"
+            "description": "Hien thi thông tin bang phông chu nho hon trên màn hình hàn"
         },
         "BluetoothLE": {
             "displayText": "Bluetooth\n",
@@ -285,19 +341,19 @@
         },
         "PowerLimit": {
             "displayText": "Công suat\ngioi han",
-            "description": "-Công suat toi đa mà tay hàn có the su dung (W=watt)"
+            "description": "Công suat toi đa mà tay hàn có the su dung (W=watt)"
         },
         "CalibrateCJC": {
             "displayText": "Calibrate CJC\nat next boot",
-            "description": "At next boot tip Cold Junction Compensation will be calibrated (not required if Delta T is < 5°C)"
+            "description": "Calbrate Cold Junction Compensation at next boot (not required if Delta T is < 5°C)"
         },
         "VoltageCalibration": {
             "displayText": "Hieu chinh\nđien áp đau vào?",
-            "description": "-bat đau hieu chuan VIN (nhan và giu đe thoát)"
+            "description": "bat đau hieu chuan VIN (nhan và giu đe thoát)"
         },
         "PowerPulsePower": {
             "displayText": "Công suat\nkích nguon",
-            "description": "-Cuong đo công suat kích nguon (watt)"
+            "description": "Cuong đo công suat kích nguon (watt)"
         },
         "PowerPulseWait": {
             "displayText": "Trì hoãn\nđien áp kích",
@@ -305,11 +361,11 @@
         },
         "PowerPulseDuration": {
             "displayText": "Thoi luong\nkích nguon",
-            "description": "-thoi luong kích nguon (x 250ms)"
+            "description": "thoi luong kích nguon (x 250ms)"
         },
         "SettingsReset": {
             "displayText": "Khôi phuc\ncài đat goc?",
-            "description": "-đat lai tat ca cài đat ve mac đinh"
+            "description": "đat lai tat ca cài đat ve mac đinh"
         },
         "LanguageSwitch": {
             "displayText": "Ngôn ngu:\n VI  Tieng Viet",

Translations/translation_YUE_HK.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Tip: "
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "關"
+            "message": "Preheat"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown"
         },
         "ProfilePreheatString": {
             "message": "Preheat"
@@ -80,15 +83,12 @@
         "SettingRightChar": "右",
         "SettingLeftChar": "左",
         "SettingAutoChar": "自",
-        "SettingOffChar": "關",
         "SettingSlowChar": "慢",
         "SettingMediumChar": "中",
         "SettingFastChar": "快",
-        "SettingStartNoneChar": "無",
         "SettingStartSolderingChar": "焊",
         "SettingStartSleepChar": "待",
         "SettingStartSleepOffChar": "室",
-        "SettingLockDisableChar": "無",
         "SettingLockBoostChar": "增",
         "SettingLockFullChar": "全"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "自動啓用",
-            "description": "開機時自動啓用 <無=停用 | 焊=焊接模式 | 待=待機模式 | 室=室温待機>"
+            "description": "開機時自動啓用 <焊=焊接模式 | 待=待機模式 | 室=室温待機>"
         },
         "TempChangeShortStep": {
             "displayText": "温度調整 短",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "撳掣鎖定",
-            "description": "喺焊接模式時，同時長撳兩粒掣啓用撳掣鎖定 <無=停用 | 增=淨係容許增熱模式 | 全=鎖定全部>"
+            "description": "喺焊接模式時，同時長撳兩粒掣啓用撳掣鎖定 <增=淨係容許增熱模式 | 全=鎖定全部>"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile Phases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat Temp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat Speed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1 Temp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1 Duration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2 Temp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2 Duration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3 Temp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3 Duration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4 Temp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4 Duration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5 Temp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5 Duration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown Speed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profile Phases",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "動作敏感度",
-            "description": "0=停用 | 1=最低敏感度 | ... | 9=最高敏感度"
+            "description": "1=最低敏感度 | ... | 9=最高敏感度"
         },
         "SleepTemperature": {
             "displayText": "待機温度",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "磁場敏感度",
-            "description": "磁場感應器用嚟啓動待機模式嘅敏感度 <0=停用 | 1=最低敏感度 | ... | 9=最高敏感度>"
+            "description": "磁場感應器用嚟啓動待機模式嘅敏感度 <1=最低敏感度 | ... | 9=最高敏感度>"
         },
         "TemperatureUnit": {
             "displayText": "温度單位",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "動畫速度",
-            "description": "功能表圖示動畫嘅速度 <關=不顯示動畫 | 慢=慢速 | 中=中速 | 快=快速>"
+            "description": "功能表圖示動畫嘅速度 <慢=慢速 | 中=中速 | 快=快速>"
         },
         "AnimLoop": {
             "displayText": "動畫循環",

Translations/translation_ZH_CN.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "<--- "
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "关"
+            "message": "Preheat"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown"
         },
         "ProfilePreheatString": {
             "message": "Preheat"
@@ -80,15 +83,12 @@
         "SettingRightChar": "右",
         "SettingLeftChar": "左",
         "SettingAutoChar": "自",
-        "SettingOffChar": "关",
         "SettingSlowChar": "慢",
         "SettingMediumChar": "中",
         "SettingFastChar": "快",
-        "SettingStartNoneChar": "无",
         "SettingStartSolderingChar": "焊",
         "SettingStartSleepChar": "待",
         "SettingStartSleepOffChar": "室",
-        "SettingLockDisableChar": "无",
         "SettingLockBoostChar": "增",
         "SettingLockFullChar": "全"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "自动启动",
-            "description": "开机时自动启动 <无=禁用 | 焊=焊接模式 | 待=待机模式 | 室=室温待机>"
+            "description": "开机时自动启动 <焊=焊接模式 | 待=待机模式 | 室=室温待机>"
         },
         "TempChangeShortStep": {
             "displayText": "短按温度调整",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "按键锁定",
-            "description": "焊接模式时，同时长按两个按键启用按键锁定 <无=禁用 | 增=只容许增热模式 | 全=完全锁定>"
+            "description": "焊接模式时，同时长按两个按键启用按键锁定 <增=只容许增热模式 | 全=完全锁定>"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile Phases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat Temp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat Speed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1 Temp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1 Duration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2 Temp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2 Duration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3 Temp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3 Duration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4 Temp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4 Duration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5 Temp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5 Duration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown Speed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profile Phases",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "动作灵敏度",
-            "description": "0=禁用 | 1=最低灵敏度 | ... | 9=最高灵敏度"
+            "description": "1=最低灵敏度 | ... | 9=最高灵敏度"
         },
         "SleepTemperature": {
             "displayText": "待机温度",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "磁场灵敏度",
-            "description": "霍尔效应传感器用作启动待机模式的灵敏度 <0=禁用 | 1=最低灵敏度 | ... | 9=最高灵敏度>"
+            "description": "霍尔效应传感器用作启动待机模式的灵敏度 <1=最低灵敏度 | ... | 9=最高灵敏度>"
         },
         "TemperatureUnit": {
             "displayText": "温度单位",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "动画速度",
-            "description": "主菜单中功能图标动画的播放速度 <关=不显示动画 | 慢=慢速 | 中=中速 | 快=快速>"
+            "description": "主菜单中功能图标动画的播放速度 <慢=慢速 | 中=中速 | 快=快速>"
         },
         "AnimLoop": {
             "displayText": "动画循环",

Translations/translation_ZH_TW.json

@@ -60,8 +60,11 @@
         "SleepingTipAdvancedString": {
             "message": "Tip: "
         },
-        "OffString": {
+        "ProfilePreheatString": {
-            "message": "關"
+            "message": "Preheat"
+        },
+        "ProfileCooldownString": {
+            "message": "Cooldown"
         },
         "ProfilePreheatString": {
             "message": "Preheat"
@@ -80,15 +83,12 @@
         "SettingRightChar": "右",
         "SettingLeftChar": "左",
         "SettingAutoChar": "自",
-        "SettingOffChar": "關",
         "SettingSlowChar": "慢",
         "SettingMediumChar": "中",
         "SettingFastChar": "快",
-        "SettingStartNoneChar": "無",
         "SettingStartSolderingChar": "焊",
         "SettingStartSleepChar": "待",
         "SettingStartSleepOffChar": "室",
-        "SettingLockDisableChar": "無",
         "SettingLockBoostChar": "增",
         "SettingLockFullChar": "全"
     },
@@ -141,7 +141,7 @@
         },
         "AutoStart": {
             "displayText": "自動啟用",
-            "description": "開機時自動啟用 <無=停用 | 焊=焊接模式 | 待=待機模式 | 室=室溫待機>"
+            "description": "開機時自動啟用 <焊=焊接模式 | 待=待機模式 | 室=室溫待機>"
         },
         "TempChangeShortStep": {
             "displayText": "溫度調整 短",
@@ -153,7 +153,63 @@
         },
         "LockingMode": {
             "displayText": "按鍵鎖定",
-            "description": "於焊接模式時，同時長按兩個按鍵啟用按鍵鎖定 <無=停用 | 增=只容許增熱模式 | 全=鎖定全部>"
+            "description": "於焊接模式時，同時長按兩個按鍵啟用按鍵鎖定 <增=只容許增熱模式 | 全=鎖定全部>"
+        },
+        "ProfilePhases": {
+            "displayText": "Profile Phases",
+            "description": "Number of phases in profile mode"
+        },
+        "ProfilePreheatTemp": {
+            "displayText": "Preheat Temp",
+            "description": "Preheat to this temperature at the start of profile mode"
+        },
+        "ProfilePreheatSpeed": {
+            "displayText": "Preheat Speed",
+            "description": "Preheat at this rate (degrees per second)"
+        },
+        "ProfilePhase1Temp": {
+            "displayText": "Phase 1 Temp",
+            "description": "Target temperature for the end of this phase"
+        },
+        "ProfilePhase1Duration": {
+            "displayText": "Phase 1 Duration",
+            "description": "Target duration of this phase (seconds)"
+        },
+        "ProfilePhase2Temp": {
+            "displayText": "Phase 2 Temp",
+            "description": ""
+        },
+        "ProfilePhase2Duration": {
+            "displayText": "Phase 2 Duration",
+            "description": ""
+        },
+        "ProfilePhase3Temp": {
+            "displayText": "Phase 3 Temp",
+            "description": ""
+        },
+        "ProfilePhase3Duration": {
+            "displayText": "Phase 3 Duration",
+            "description": ""
+        },
+        "ProfilePhase4Temp": {
+            "displayText": "Phase 4 Temp",
+            "description": ""
+        },
+        "ProfilePhase4Duration": {
+            "displayText": "Phase 4 Duration",
+            "description": ""
+        },
+        "ProfilePhase5Temp": {
+            "displayText": "Phase 5 Temp",
+            "description": ""
+        },
+        "ProfilePhase5Duration": {
+            "displayText": "Phase 5 Duration",
+            "description": ""
+        },
+        "ProfileCooldownSpeed": {
+            "displayText": "Cooldown Speed",
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "ProfilePhases": {
             "displayText": "Profile Phases",
@@ -213,7 +269,7 @@
         },
         "MotionSensitivity": {
             "displayText": "動作敏感度",
-            "description": "0=停用 | 1=最低敏感度 | ... | 9=最高敏感度"
+            "description": "1=最低敏感度 | ... | 9=最高敏感度"
         },
         "SleepTemperature": {
             "displayText": "待機溫度",
@@ -229,7 +285,7 @@
         },
         "HallEffSensitivity": {
             "displayText": "磁場敏感度",
-            "description": "磁場感應器用作啟動待機模式的敏感度 <0=停用 | 1=最低敏感度 | ... | 9=最高敏感度>"
+            "description": "磁場感應器用作啟動待機模式的敏感度 <1=最低敏感度 | ... | 9=最高敏感度>"
         },
         "TemperatureUnit": {
             "displayText": "溫標",
@@ -253,7 +309,7 @@
         },
         "AnimSpeed": {
             "displayText": "動畫速度",
-            "description": "功能表圖示動畫的速度 <關=不顯示動畫 | 慢=慢速 | 中=中速 | 快=快速>"
+            "description": "功能表圖示動畫的速度 <慢=慢速 | 中=中速 | 快=快速>"
         },
         "AnimLoop": {
             "displayText": "動畫循環",

Translations/translations_definitions.json

@@ -119,11 +119,6 @@
             ],
             "description": "The prefix text shown before tip temperature when the unit is sleeping with advanced view on."
         },
-        {
-            "id": "OffString",
-            "maxLen": 3,
-            "description": "Shown when a setting is turned off."
-        },
         {
             "id": "DeviceFailedValidationWarning",
             "default": "Device may be\ncounterfeit",
@@ -154,11 +149,6 @@
             "len": 1,
             "description": "Shown for automatic display rotation."
         },
-        {
-            "id": "SettingOffChar",
-            "len": 1,
-            "description": "Shown when a setting is turned off"
-        },
         {
             "id": "SettingSlowChar",
             "len": 1,
@@ -174,11 +164,6 @@
             "len": 1,
             "description": "Shown when a setting is set to a fast value i.e. animation speed"
         },
-        {
-            "id": "SettingStartNoneChar",
-            "len": 1,
-            "description": "Shown when autostart state is to do nothing and go to a normal boot"
-        },
         {
             "id": "SettingStartSolderingChar",
             "len": 1,
@@ -194,12 +179,6 @@
             "len": 1,
             "description": "Shown when the auto start state is set to go to an off state, but on movement wake into soldering mode."
         },
-        {
-            "id": "SettingLockDisableChar",
-            "len": 1,
-            "default": "D",
-            "description": "Shown when locking mode is turned off."
-        },
         {
             "id": "SettingLockBoostChar",
             "len": 1,

source/Core/Drivers/Font.h

@@ -187,6 +187,12 @@ const uint8_t RepeatInf[] = {
     0x00, 0xc0, 0xf0, 0x78, 0x1c, 0x0c, 0x0e, 0x06, 0x06, 0x0e, 0x2c, 0x3c, 0x38, 0x3c, 0x00, 0x00,
     0x00, 0x31, 0x49, 0x48, 0x30, 0x48, 0x48, 0x30, 0x00, 0x00, 0x30, 0x38, 0x1e, 0x0f, 0x03, 0x00};
 
+const uint8_t UnavailableIcon[] = {
+    // width = 16
+    // height = 16
+    0x00, 0xc0, 0x30, 0x08, 0x04, 0x04, 0x02, 0x82, 0xc2, 0xe2, 0x74, 0x24, 0x08, 0x30, 0xc0, 0x00,
+    0x00, 0x03, 0x0c, 0x10, 0x24, 0x2e, 0x47, 0x43, 0x41, 0x40, 0x20, 0x20, 0x10, 0x0c, 0x03, 0x00};
+
 /*
  * 16x16 icons
  * 32 * 3 = Frame size * Frame count

source/Core/Inc/Translation.h

@@ -130,22 +130,18 @@ struct TranslationIndexTable {
   uint16_t SleepingSimpleString;
   uint16_t SleepingAdvancedString;
   uint16_t SleepingTipAdvancedString;
-  uint16_t OffString;
   uint16_t DeviceFailedValidationWarning;
   uint16_t TooHotToStartProfileWarning;
 
   uint16_t SettingRightChar;
   uint16_t SettingLeftChar;
   uint16_t SettingAutoChar;
-  uint16_t SettingOffChar;
   uint16_t SettingSlowChar;
   uint16_t SettingMediumChar;
   uint16_t SettingFastChar;
-  uint16_t SettingStartNoneChar;
   uint16_t SettingStartSolderingChar;
   uint16_t SettingStartSleepChar;
   uint16_t SettingStartSleepOffChar;
-  uint16_t SettingLockDisableChar;
   uint16_t SettingLockBoostChar;
   uint16_t SettingLockFullChar;
 

source/Core/Src/settingsGUI.cpp

@@ -254,7 +254,7 @@ const menuitem powerMenu[] = {
 #endif
 #ifdef POW_PD
   /* PD timeout setup */
-  {SETTINGS_DESC(SettingsItemIndex::PDNegTimeout), nullptr, displayPDNegTimeout, nullptr, SettingsOptions::PDNegTimeout, SettingsItemIndex::PDNegTimeout, 5},
+  {SETTINGS_DESC(SettingsItemIndex::PDNegTimeout), nullptr, displayPDNegTimeout, nullptr, SettingsOptions::PDNegTimeout, SettingsItemIndex::PDNegTimeout, 6},
   /* Toggle PPS & EPR */
   {SETTINGS_DESC(SettingsItemIndex::PDVpdo), nullptr, displayPDVpdo, nullptr, SettingsOptions::PDVpdo, SettingsItemIndex::PDVpdo, 7},
 #endif
@@ -394,7 +394,7 @@ const menuitem UIMenu[] = {
   /* Invert screen colour */
   {SETTINGS_DESC(SettingsItemIndex::ColourInversion), nullptr, displayInvertColor, nullptr, SettingsOptions::OLEDInversion, SettingsItemIndex::ColourInversion, 7},
   /* Set logo duration */
-  {SETTINGS_DESC(SettingsItemIndex::LOGOTime), nullptr, displayLogoTime, nullptr, SettingsOptions::LOGOTime, SettingsItemIndex::LOGOTime, 5},
+  {SETTINGS_DESC(SettingsItemIndex::LOGOTime), nullptr, displayLogoTime, nullptr, SettingsOptions::LOGOTime, SettingsItemIndex::LOGOTime, 6},
   /* Advanced idle screen */
   {SETTINGS_DESC(SettingsItemIndex::AdvancedIdle), nullptr, displayAdvancedIDLEScreens, nullptr, SettingsOptions::DetailedIDLE, SettingsItemIndex::AdvancedIdle, 7},
   /* Advanced soldering screen */
@@ -528,9 +528,9 @@ static void displayQCInputV(void) {
 static void displayPDNegTimeout(void) {
   auto value = getSettingValue(SettingsOptions::PDNegTimeout);
   if (value == 0) {
-    OLED::print(translatedString(Tr->OffString), FontStyle::LARGE);
+    OLED::drawArea(OLED_WIDTH - 16 - 2, 0, 16, 16, UnavailableIcon);
   } else {
-    OLED::printNumber(value, 3, FontStyle::LARGE);
+    OLED::printNumber(value, 2, FontStyle::LARGE);
   }
 }
 
@@ -569,14 +569,14 @@ static void displayBoostTemp(void) {
   if (getSettingValue(SettingsOptions::BoostTemp)) {
     OLED::printNumber(getSettingValue(SettingsOptions::BoostTemp), 3, FontStyle::LARGE);
   } else {
-    OLED::print(translatedString(Tr->OffString), FontStyle::LARGE);
+    OLED::drawArea(OLED_WIDTH - 16 - 2, 0, 16, 16, UnavailableIcon);
   }
 }
 
 static void displayAutomaticStartMode(void) {
   switch (getSettingValue(SettingsOptions::AutoStartMode)) {
   case autoStartMode_t::NO:
-    OLED::print(translatedString(Tr->SettingStartNoneChar), FontStyle::LARGE);
+    OLED::drawArea(OLED_WIDTH - 16 - 2, 0, 16, 16, UnavailableIcon);
     break;
   case autoStartMode_t::SOLDER:
     OLED::print(translatedString(Tr->SettingStartSolderingChar), FontStyle::LARGE);
@@ -588,7 +588,7 @@ static void displayAutomaticStartMode(void) {
     OLED::print(translatedString(Tr->SettingStartSleepOffChar), FontStyle::LARGE);
     break;
   default:
-    OLED::print(translatedString(Tr->SettingStartNoneChar), FontStyle::LARGE);
+    OLED::drawArea(OLED_WIDTH - 16 - 2, 0, 16, 16, UnavailableIcon);
     break;
   }
 }
@@ -600,7 +600,7 @@ static void displayTempChangeLongStep(void) { OLED::printNumber(getSettingValue(
 static void displayLockingMode(void) {
   switch (getSettingValue(SettingsOptions::LockingMode)) {
   case 0:
-    OLED::print(translatedString(Tr->SettingLockDisableChar), FontStyle::LARGE);
+    OLED::drawArea(OLED_WIDTH - 16 - 2, 0, 16, 16, UnavailableIcon);
     break;
   case 1:
     OLED::print(translatedString(Tr->SettingLockBoostChar), FontStyle::LARGE);
@@ -609,7 +609,7 @@ static void displayLockingMode(void) {
     OLED::print(translatedString(Tr->SettingLockFullChar), FontStyle::LARGE);
     break;
   default:
-    OLED::print(translatedString(Tr->SettingLockDisableChar), FontStyle::LARGE);
+    OLED::drawArea(OLED_WIDTH - 16 - 2, 0, 16, 16, UnavailableIcon);
     break;
   }
 }
@@ -667,7 +667,13 @@ static bool showProfilePhase5Options(void) { return getSettingValue(SettingsOpti
 
 #endif /* PROFILE_SUPPORT */
 
-static void displaySensitivity(void) { OLED::printNumber(getSettingValue(SettingsOptions::Sensitivity), 1, FontStyle::LARGE, false); }
+static void displaySensitivity(void) {
+  if (getSettingValue(SettingsOptions::Sensitivity)) {
+    OLED::printNumber(getSettingValue(SettingsOptions::Sensitivity), 1, FontStyle::LARGE, false);
+  } else {
+    OLED::drawArea(OLED_WIDTH - 16 - 2, 0, 16, 16, UnavailableIcon);
+  }
+}
 static bool showSleepOptions(void) { return getSettingValue(SettingsOptions::Sensitivity) > 0; }
 
 #ifndef NO_SLEEP_MODE
@@ -696,7 +702,7 @@ static void displaySleepTemp(void) { OLED::printNumber(getSettingValue(SettingsO
 
 static void displaySleepTime(void) {
   if (getSettingValue(SettingsOptions::SleepTime) == 0) {
-    OLED::print(translatedString(Tr->OffString), FontStyle::LARGE);
+    OLED::drawArea(OLED_WIDTH - 16 - 2, 0, 16, 16, UnavailableIcon);
   } else if (getSettingValue(SettingsOptions::SleepTime) < 6) {
     OLED::printNumber(getSettingValue(SettingsOptions::SleepTime) * 10, 2, FontStyle::LARGE);
     OLED::print(LargeSymbolSeconds, FontStyle::LARGE);
@@ -710,7 +716,7 @@ static void displaySleepTime(void) {
 
 static void displayShutdownTime(void) {
   if (getSettingValue(SettingsOptions::ShutdownTime) == 0) {
-    OLED::print(translatedString(Tr->OffString), FontStyle::LARGE);
+    OLED::drawArea(OLED_WIDTH - 16 - 2, 0, 16, 16, UnavailableIcon);
   } else {
     OLED::printNumber(getSettingValue(SettingsOptions::ShutdownTime), 2, FontStyle::LARGE);
     OLED::print(LargeSymbolMinutes, FontStyle::LARGE);
@@ -718,7 +724,13 @@ static void displayShutdownTime(void) {
 }
 
 #ifdef HALL_SENSOR
-static void displayHallEffect(void) { OLED::printNumber(getSettingValue(SettingsOptions::HallEffectSensitivity), 1, FontStyle::LARGE, false); }
+static void displayHallEffect(void) {
+  if (getSettingValue(SettingsOptions::HallEffectSensitivity)) {
+    OLED::printNumber(getSettingValue(SettingsOptions::HallEffectSensitivity), 1, FontStyle::LARGE, false);
+  } else {
+    OLED::drawArea(OLED_WIDTH - 16 - 2, 0, 16, 16, UnavailableIcon);
+  }
+}
 static bool showHallEffect(void) { return getHallSensorFitted(); }
 #endif /* HALL_SENSOR */
 
@@ -816,7 +828,7 @@ static void displayAnimationSpeed(void) {
     OLED::print(translatedString(Tr->SettingFastChar), FontStyle::LARGE);
     break;
   default:
-    OLED::print(translatedString(Tr->SettingOffChar), FontStyle::LARGE);
+    OLED::drawArea(OLED_WIDTH - 16 - 2, 0, 16, 16, UnavailableIcon);
     break;
   }
 }
@@ -839,7 +851,7 @@ static void displayInvertColor(void) {
 static void displayLogoTime(void) {
   switch (getSettingValue(SettingsOptions::LOGOTime)) {
   case logoMode_t::SKIP:
-    OLED::print(translatedString(Tr->OffString), FontStyle::LARGE);
+    OLED::drawArea(OLED_WIDTH - 16 - 2, 0, 16, 16, UnavailableIcon);
     break;
   case logoMode_t::ONETIME:
     OLED::drawArea(OLED_WIDTH - 16 - 2, 0, 16, 16, RepeatOnce);
@@ -848,7 +860,7 @@ static void displayLogoTime(void) {
     OLED::drawArea(OLED_WIDTH - 16 - 2, 0, 16, 16, RepeatInf);
     break;
   default:
-    OLED::printNumber(getSettingValue(SettingsOptions::LOGOTime), 2, FontStyle::LARGE);
+    OLED::printNumber(getSettingValue(SettingsOptions::LOGOTime), 1, FontStyle::LARGE);
     OLED::print(LargeSymbolSeconds, FontStyle::LARGE);
     break;
   }
@@ -864,7 +876,7 @@ static void displayBluetoothLE(void) { OLED::drawCheckbox(getSettingValue(Settin
 
 static void displayPowerLimit(void) {
   if (getSettingValue(SettingsOptions::PowerLimit) == 0) {
-    OLED::print(translatedString(Tr->OffString), FontStyle::LARGE);
+    OLED::drawArea(OLED_WIDTH - 16 - 2, 0, 16, 16, UnavailableIcon);
   } else {
     OLED::printNumber(getSettingValue(SettingsOptions::PowerLimit), 3, FontStyle::LARGE);
     OLED::print(LargeSymbolWatts, FontStyle::LARGE);
@@ -936,7 +948,7 @@ static void displayPowerPulse(void) {
     OLED::print(LargeSymbolDot, FontStyle::LARGE);
     OLED::printNumber(getSettingValue(SettingsOptions::KeepAwakePulse) % 10, 1, FontStyle::LARGE);
   } else {
-    OLED::print(translatedString(Tr->OffString), FontStyle::LARGE);
+    OLED::drawArea(OLED_WIDTH - 16 - 2, 0, 16, 16, UnavailableIcon);
   }
 }