TS80 Support Stage 1 (#365)

* Estimated pinout into the ioc file

* Fix Atollic paths to be somewhat more portable

* Add make command

* Add rough calls to ADC2 [untested]

* Using dual ADC injected modes

* Start both ADCs

* Move some IRQ's to ram exec

* Stabilize PID a bit more

* Add in ideas for tip type selection

* Update peripheral setup to support TS80

* Add tiptype formula / settings struct

* Add function ids to the settings menu

* Rough tip selection

* Rough out new cal routine for simple tips

* Hardware test is fairly close for first pass

* Add Simple calibration case [UNTESTED]

This adds the calibration option that uses boiling water to the calibration menu.

This is untested, and may need gain adjustments before use.

* [Feat] Add some QC testing code

* Typo fix

* Add double button press handler for different rising times

* Add hook for jump to sleep mode

* QC for 9V Works!

* Rough out QC handler, trim out old menu help text thats useless

* QC 9V working... Static all the things (Low on ROM)!

* Static all I2C to save space

* Move QC negotiation into background task so it doesnt block the UI

* Input V display works, tune ADC

* QC 3 steps working

* Start tip R measurements

* Impliment tip resistance

* Fix up the accel position, link in auto QC stages

* Fix tip title

* Tip type settings, Static OLED

* Revert I2C callbacks

* Misc Cleanup

* Better Gain value, need to investiate offset

* Add model warning

* Add TS80 Boot Logo (#367)

* Add TS80 Boot Logo

* Refined

* Moved down by 1px

* Add in power selection 18/24W

* Clean up accelerometer, fix TS100 builds, Fix voltage div cal

workspace/TS100/HAL_Driver/Inc/stm32f1xx_hal_gpio.h

@@ -250,7 +250,18 @@ void  HAL_GPIO_DeInit(GPIO_TypeDef  *GPIOx, uint32_t GPIO_Pin);
   */
 /* IO operation functions *****************************************************/
 GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+inline void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
+{
+
+  if(PinState != GPIO_PIN_RESET)
+  {
+    GPIOx->BSRR = GPIO_Pin;
+  }
+  else
+  {
+    GPIOx->BSRR = (uint32_t)GPIO_Pin << 16U;
+  }
+}
 void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
 HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
 void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);

workspace/TS100/HAL_Driver/Src/stm32f1xx_hal_gpio.c

@@ -479,21 +479,8 @@ GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
   *            @arg GPIO_BIT_SET: to set the port pin
   * @retval None
   */
-void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
-{
-  /* Check the parameters */
-  assert_param(IS_GPIO_PIN(GPIO_Pin));
-  assert_param(IS_GPIO_PIN_ACTION(PinState));
+//void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
 
-  if(PinState != GPIO_PIN_RESET)
-  {
-    GPIOx->BSRR = GPIO_Pin;
-  }
-  else
-  {
-    GPIOx->BSRR = (uint32_t)GPIO_Pin << 16U;
-  }
-}
 
 /**
   * @brief  Toggles the specified GPIO pin