From 733c7dcd4d21fdbeaeb2b815d50778b6dcf7ba73 Mon Sep 17 00:00:00 2001 From: River B <97197236+River-b@users.noreply.github.com> Date: Fri, 11 Mar 2022 23:07:57 -0800 Subject: [PATCH] Update Flashing.md --- Documentation/Flashing.md | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/Flashing.md b/Documentation/Flashing.md index b2f0edc0..795e5da5 100644 --- a/Documentation/Flashing.md +++ b/Documentation/Flashing.md @@ -95,9 +95,10 @@ It is recommended to use the [Pine64 Updater](https://github.com/pine64/pinecil- If your OS is not currently supported by the [Updater](https://github.com/pine64/pinecil-firmware-updater/releases) or it does not meet your needs, the below manual method may be used. You will need to connect your Pinecil to a computer usinga USB cable. Generally all usb controllers work, but some hubs have issues so it is recommended to connect directly and avoid USB hubs. ### Steps +
Warning: Do not have a barrel jack PSU plugged in at the same time as a USB-C cable. Doing this will severely damage your computer, or Type-C PSU.
- 1. Never have DC power plugged into Pinecil when you are updating firmware, only use a USB-C cable or you may destroy something. + 1. :warning: Never have DC power plugged into Pinecil when you are updating firmware, only use a USB-C cable or you may destroy something. 2. Download and extract the firmware package from Github [IronOS Releases](https://github.com/Ralim/IronOS/releases) 3. Enter DFU mode: hold down the (-) button at the back of the iron (do not release it). 4. Connect USB to PC, and USB-C to back of Pinecil, keep holding (-) button down.