me/IronOS
1
0
Fork 1
mirror of https://github.com/Ralim/IronOS.git synced 2025-02-26 07:53:55 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

2.04 bugfixes

Browse Source 
Should help with UI lockups
This commit is contained in:
Ben V. Brown
2018-05-07 21:24:29 +10:00
parent 771f0a1b9e
commit 4718efe79b
7 changed files with 109 additions and 44 deletions
Download Patch File Download Diff File Expand all files Collapse all files

39
workspace/TS100/inc/Settings.h
View File

@@ -11,31 +11,34 @@
#define SETTINGS_H_
#include <stdint.h>
#include "stm32f1xx_hal.h"
#define SETTINGSVERSION 0x13 /*Change this if you change the struct below to prevent people getting out of sync*/
#define SETTINGSVERSION 0x14 /*Change this if you change the struct below to prevent people getting out of sync*/
/*
* This struct must be a multiple of 2 bytes as it is saved / restored from flash in uint16_t chunks
*/
typedef struct {
uint16_t SolderingTemp; //current set point for the iron
uint16_t SleepTemp; //temp to drop to in sleep
uint8_t SleepTime; //minutes timeout to sleep
uint8_t cutoutSetting; // The voltage we cut out at for under voltage
uint8_t OrientationMode:2; //If true we want to invert the display for lefties
uint8_t sensitivity :4; //Sensitivity of accelerometer (5 bits)
uint8_t autoStartMode :2; //Should the unit automatically jump straight into soldering mode when power is applied
uint8_t ShutdownTime; //Time until unit shuts down if left alone
uint8_t boostModeEnabled :1; //Boost mode swaps BUT_A in soldering mode to temporary soldering temp over-ride
uint8_t coolingTempBlink :1; //Should the temperature blink on the cool down screen until its <50C
uint16_t SolderingTemp; //current set point for the iron
uint16_t SleepTemp; //temp to drop to in sleep
uint8_t SleepTime; //minutes timeout to sleep
uint8_t cutoutSetting; // The voltage we cut out at for under voltage
uint8_t OrientationMode:2; //If true we want to invert the display for lefties
uint8_t sensitivity :4; //Sensitivity of accelerometer (5 bits)
uint8_t autoStartMode :2; //Should the unit automatically jump straight into soldering mode when power is applied
uint8_t ShutdownTime; //Time until unit shuts down if left alone
uint8_t boostModeEnabled :1; //Boost mode swaps BUT_A in soldering mode to temporary soldering temp over-ride
uint8_t coolingTempBlink :1; //Should the temperature blink on the cool down screen until its <50C
uint8_t detailedIDLE :1; //Detailed idle screen
uint8_t detailedSoldering :1; //Detailed soldering screens
uint8_t temperatureInF; //Should the temp be in F or C (true is F)
uint8_t descriptionScrollSpeed:1; // Description scroll speed
uint16_t voltageDiv; //Voltage divisor factor
uint16_t BoostTemp; //Boost mode set point for the iron
int16_t CalibrationOffset; //This stores the temperature offset for this tip in the iron.
uint8_t version; //Used to track if a reset is needed on firmware upgrade
uint32_t padding; //This is here for in case we are not an even divisor so that nothing gets cut off
uint8_t temperatureInF; //Should the temp be in F or C (true is F)
uint8_t descriptionScrollSpeed:1; // Description scroll speed
uint16_t voltageDiv; //Voltage divisor factor
uint16_t BoostTemp; //Boost mode set point for the iron
int16_t CalibrationOffset; //This stores the temperature offset for this tip in the iron.
uint8_t PID_P; //PID P Term
uint8_t PID_I; //PID I Term
uint8_t PID_D; //PID D Term
uint8_t version; //Used to track if a reset is needed on firmware upgrade
uint32_t padding; //This is here for in case we are not an even divisor so that nothing gets cut off
} systemSettingsType;
extern volatile systemSettingsType systemSettings;