mirror of
https://github.com/Ralim/IronOS.git
synced 2025-02-26 07:53:55 +00:00
manually merge in dual line settings
This commit is contained in:
Ben V. Brown
@@ -104,10 +104,6 @@ void OLED::drawChar(char c, char PrecursorCommand) {
|
||||
if (c < ' ') {
|
||||
return;
|
||||
}
|
||||
|
||||
//We are left with
|
||||
uint8_t* charPointer;
|
||||
|
||||
uint16_t index = 0;
|
||||
if (PrecursorCommand == 0) {
|
||||
//Fonts are offset to start at the space char
|
||||
@@ -137,7 +133,7 @@ void OLED::drawChar(char c, char PrecursorCommand) {
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t* charPointer;
|
||||
charPointer = ((uint8_t*) currentFont)
|
||||
+ ((fontWidth * (fontHeight / 8)) * index);
|
||||
|
||||
@@ -197,7 +193,10 @@ void OLED::setCursor(int16_t x, int16_t y) {
|
||||
cursor_x = x;
|
||||
cursor_y = y;
|
||||
}
|
||||
|
||||
void OLED::setCharCursor(int16_t x, int16_t y) {
|
||||
cursor_x = x * fontWidth;
|
||||
cursor_y = y * fontHeight;
|
||||
}
|
||||
void OLED::setFont(uint8_t fontNumber) {
|
||||
if (fontNumber == 1) {
|
||||
//small font
|
||||
|
||||
@@ -6,28 +6,69 @@
|
||||
*/
|
||||
#include "Translation.h"
|
||||
|
||||
// TEMPLATES for short names - choose one and use it as base for your translation:
|
||||
|
||||
//const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||||
//const char* SettingsShortNames[16][2] = {
|
||||
// /* (<= 5) Power source (DC or batt) */ {"PWRSC"},
|
||||
// /* (<= 4) Sleep temperature */ {"STMP"},
|
||||
// /* (<= 4) Sleep timeout */ {"STME"},
|
||||
// /* (<= 5) Shutdown timeout */ {"SHTME"},
|
||||
// /* (<= 6) Motion sensitivity level */ {"MSENSE"},
|
||||
// /* (<= 6) Temperature in F and C */ {"TMPUNT"},
|
||||
// /* (<= 6) Advanced idle display mode enabled */ {"ADVIDL"},
|
||||
// /* (<= 6) Display rotation mode */ {"DSPROT"},
|
||||
// /* (<= 6) Boost enabled */ {"BOOST"},
|
||||
// /* (<= 4) Boost temperature */ {"BTMP"},
|
||||
// /* (<= 6) Automatic start mode */ {"ASTART"},
|
||||
// /* (<= 6) Cooldown blink */ {"CLBLNK"},
|
||||
// /* (<= 8) Temperature calibration enter menu */ {"TMP CAL?"},
|
||||
// /* (<= 8) Settings reset command */ {"RESET?"},
|
||||
// /* (<= 8) Calibrate input voltage */ {"CAL VIN?"},
|
||||
// /* (<= 6) Advanced soldering screen enabled */ {"ADVSLD"},
|
||||
//};
|
||||
|
||||
//const enum ShortNameType SettingsShortNameType = SHORT_NAME_DOUBLE_LINE;
|
||||
//const char* SettingsShortNames[16][2] = {
|
||||
// /* (<= 11) Power source (DC or batt) */ {"Power", "source"},
|
||||
// /* (<= 9) Sleep temperature */ {"Sleep", "temp"},
|
||||
// /* (<= 9) Sleep timeout */ {"Sleep", "timeout"},
|
||||
// /* (<= 11) Shutdown timeout */ {"Shutdown", "timeout"},
|
||||
// /* (<= 13) Motion sensitivity level */ {"Motion", "sensitivity"},
|
||||
// /* (<= 13) Temperature in F and C */ {"Temperature", "units"},
|
||||
// /* (<= 13) Advanced idle display mode enabled */ {"Detailed", "idle screen"},
|
||||
// /* (<= 13) Display rotation mode */ {"Display", "orientation"},
|
||||
// /* (<= 13) Boost enabled */ {"Boost mode", "enabled"},
|
||||
// /* (<= 9) Boost temperature */ {"Boost", "temp"},
|
||||
// /* (<= 13) Automatic start mode */ {"Auto", "start"},
|
||||
// /* (<= 13) Cooldown blink */ {"Cooldown", "blink"},
|
||||
// /* (<= 16) Temperature calibration enter menu */ {"Calibrate", "temperature?"},
|
||||
// /* (<= 16) Settings reset command */ {"Factory", "Reset?"},
|
||||
// /* (<= 16) Calibrate input voltage */ {"Calibrate", "input voltage?"},
|
||||
// /* (<= 13) Advanced soldering screen enabled */ {"Detailed", "solder screen"},
|
||||
//};
|
||||
|
||||
#ifdef LANG_EN
|
||||
const char* SettingsLongNames[16] =
|
||||
{
|
||||
/*These are all the help text for all the settings.*/
|
||||
/*No requirements on spacing or length*/
|
||||
"Power source. Sets cutoff voltage. <DC 10V> <S 3.3V per cell>", //Power Source
|
||||
"Sleep Temperature <C>", //Sleep Temp
|
||||
"Sleep Timeout <Minutes/Seconds>", //Sleep Timeout
|
||||
"Shutdown Timeout <Minutes>", //Shutdown Time
|
||||
"Motion Sensitivity <0.Off 1.least sensitive 9.most sensitive>", //Motion Sensitivity
|
||||
"Temperature Unit <C=Celsius F=Fahrenheit>", //Temp Unit
|
||||
"Display detailed information in a smaller font on the idle screen.", //Detailed Information
|
||||
"Display Orientation <A. Automatic L. Left Handed R. Right Handed>", //Orientation
|
||||
"Enable front key enters boost mode 450C mode when soldering", //Boost enable
|
||||
"Temperature when in \"boost\" mode", //Boost Temp
|
||||
"Automatically starts the iron into soldering on power up. T=Soldering, S= Sleep mode,F=Off", //Auto start
|
||||
"Blink the temperature on the cooling screen while the tip is still hot.", //Cooling Blink
|
||||
"Calibrate tip offset.", //Calibrate Tip
|
||||
"Reset all settings", //Reset Settings
|
||||
"VIN Calibration. Buttons adjust, long press to exit", //VIN Cal
|
||||
"Display detailed information while soldering", //ADV SLD
|
||||
};
|
||||
// These are all the help text for all the settings.
|
||||
// No requirements on spacing or length.
|
||||
/* Power source (DC or batt) */"Power source. Sets cutoff voltage. <DC 10V> <S 3.3V per cell>",
|
||||
/* Sleep temperature */"Sleep Temperature <C>",
|
||||
/* Sleep timeout */"Sleep Timeout <Minutes/Seconds>",
|
||||
/* Shutdown timeout */"Shutdown Timeout <Minutes>",
|
||||
/* Motion sensitivity level */"Motion Sensitivity <0.Off 1.least sensitive 9.most sensitive>",
|
||||
/* Temperature in F and C */"Temperature Unit <C=Celsius F=Fahrenheit>",
|
||||
/* Advanced idle display mode enabled */"Display detailed information in a smaller font on the idle screen.",
|
||||
/* Display rotation mode */"Display Orientation <A. Automatic L. Left Handed R. Right Handed>",
|
||||
/* Boost enabled */"Enable front key enters boost mode 450C mode when soldering",
|
||||
/* Boost temperature */"Temperature when in \"boost\" mode",
|
||||
/* Automatic start mode */"Automatically starts the iron into soldering on power up. T=Soldering, S= Sleep mode,F=Off",
|
||||
/* Cooldown blink */"Blink the temperature on the cooling screen while the tip is still hot.",
|
||||
/* Temperature calibration enter menu */"Calibrate tip offset.",
|
||||
/* Settings reset command */"Reset all settings",
|
||||
/* Calibrate input voltage */"VIN Calibration. Buttons adjust, long press to exit",
|
||||
/* Advanced soldering screen enabled */"Display detailed information while soldering", };
|
||||
|
||||
const char* SettingsCalibrationWarning =
|
||||
"Please ensure the tip is at room temperature before continuing!";
|
||||
@@ -42,27 +83,49 @@ const char SettingFalseChar = 'F';
|
||||
const char SettingRightChar = 'R';
|
||||
const char SettingLeftChar = 'L';
|
||||
const char SettingAutoChar = 'A';
|
||||
|
||||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_DOUBLE_LINE;
|
||||
const char* SettingsShortNames[16][2] = {
|
||||
/* (<= 11) Power source (DC or batt) */{ "Power", "source" },
|
||||
/* (<= 9) Sleep temperature */{ "Sleep", "temp" },
|
||||
/* (<= 9) Sleep timeout */{ "Sleep", "timeout" },
|
||||
/* (<= 11) Shutdown timeout */{ "Shutdown", "timeout" },
|
||||
/* (<= 13) Motion sensitivity level */{ "Motion", "sensitivity" },
|
||||
/* (<= 13) Temperature in F and C */{ "Temperature", "units" },
|
||||
/* (<= 13) Advanced idle display mode enabled */{ "Detailed", "idle screen" },
|
||||
/* (<= 13) Display rotation mode */{ "Display", "orientation" },
|
||||
/* (<= 13) Boost enabled */{ "Boost mode", "enabled" },
|
||||
/* (<= 9) Boost temperature */{ "Boost", "temp" },
|
||||
/* (<= 13) Automatic start mode */{ "Auto", "start" },
|
||||
/* (<= 13) Cooldown blink */{ "Cooldown", "blink" },
|
||||
/* (<= 16) Temperature calibration enter menu */{ "Calibrate", "temperature?" },
|
||||
/* (<= 16) Settings reset command */{ "Factory", "Reset?" },
|
||||
/* (<= 16) Calibrate input voltage */{ "Calibrate",
|
||||
"input voltage?" },
|
||||
/* (<= 13) Advanced soldering screen enabled */{ "Detailed",
|
||||
"solder screen" }, };
|
||||
#endif
|
||||
|
||||
#ifdef LANG_RU
|
||||
const char* SettingsLongNames[16] = {
|
||||
/*These are all the help text for all the settings.*/
|
||||
/*No requirements on spacing or length*/
|
||||
"Источник питания. Установка напряжения отключения. <DC 10V> <S 3.3 V на батарею>", //Cell count
|
||||
"Температура Сна <С>",//Sleep Temp
|
||||
"Переход в режим Сна <Минуты>",//Sleep timeout
|
||||
"Переходит в режим ожидания <Минуты>",//Shutdown timeout
|
||||
"Акселерометр <0. Выкл. 1. мин. чувствительный 9. макс. чувствительный>",//Sensitivity
|
||||
"В чем измерять температуру",//Temp Unit
|
||||
"Display detailed information in a smaller font on the idle screen.",//Detailed Information
|
||||
"Ориентация Дисплея <A. Автоматический L. Левая Рука R. Правая Рука>",//Orientation
|
||||
"Активация кнопки A для Турбо режима до 450С при пайке ",//Boost enable
|
||||
"Установка температуры для Турбо режима",//Boost temp
|
||||
"Автоматический запуск паяльника при включении питания. T=Нагрев, S= Режим Сна,F=Выкл.",//Auto start
|
||||
"Мигает температура на экране охлаждения, пока жало остается горячим."//Cooling blink
|
||||
"Calibrate tip offset.",//Calibrate Tip
|
||||
"Reset all settings",//Reset Settings
|
||||
"VIN Calibration. Buttons adjust, long press to exit",//VIN Cal
|
||||
"Display detailed information while soldering",//ADV SLD
|
||||
// These are all the help text for all the settings.
|
||||
// No requirements on spacing or length.
|
||||
/* Power source (DC or batt) */"Источник питания. Установка напряжения отключения. <DC 10V> <S 3.3 V на батарею>",
|
||||
/* Sleep temperature */"Температура Сна <С>",
|
||||
/* Sleep timeout */"Переход в режим Сна <Минуты>",
|
||||
/* Shutdown timeout */"Переходит в режим ожидания <Минуты>",
|
||||
/* Motion sensitivity level */"Акселерометр <0. Выкл. 1. мин. чувствительный 9. макс. чувствительный>",
|
||||
/* Temperature in F and C */"В чем измерять температуру",
|
||||
/* Advanced idle display mode enabled */"Display detailed information in a smaller font on the idle screen.",
|
||||
/* Display rotation mode */"Ориентация Дисплея <A. Автоматический L. Левая Рука R. Правая Рука>",
|
||||
/* Boost enabled */"Активация кнопки A для Турбо режима до 450С при пайке ",
|
||||
/* Boost temperature */"Установка температуры для Турбо режима",
|
||||
/* Automatic start mode */"Автоматический запуск паяльника при включении питания. T=Нагрев, S= Режим Сна,F=Выкл.",
|
||||
/* Cooldown blink */"Мигает температура на экране охлаждения, пока жало остается горячим."
|
||||
/* Temperature calibration enter menu */"Calibrate tip offset.",
|
||||
/* Settings reset command */"Reset all settings",
|
||||
/* Calibrate input voltage */"VIN Calibration. Buttons adjust, long press to exit",
|
||||
/* Advanced soldering screen enabled */"Display detailed information while soldering",
|
||||
};
|
||||
|
||||
const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
|
||||
@@ -77,62 +140,48 @@ const char SettingFalseChar = 'F';
|
||||
const char SettingRightChar = 'R';
|
||||
const char SettingLeftChar = 'L';
|
||||
const char SettingAutoChar = 'A';
|
||||
|
||||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||||
const char* SettingsShortNames[16][2] = {
|
||||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||||
/* (<= 4) Sleep temperature */{"STMP"},
|
||||
/* (<= 4) Sleep timeout */{"STME"},
|
||||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||||
/* (<= 6) Boost enabled */{"BOOST"},
|
||||
/* (<= 4) Boost temperature */{"BTMP"},
|
||||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||||
/* (<= 8) Settings reset command */{"RESET?"},
|
||||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef LANG_ES
|
||||
const char* SettingsLongNames[16] = {
|
||||
/*These are all the help text for all the settings.*/
|
||||
/*No requirements on spacing or length*/
|
||||
"Fuente de energía. Ajusta el límite inferior de voltaje. <DC=10V S=3.3V por celda>",
|
||||
"Temperatura en reposo. <C>",
|
||||
"Tiempo hasta activar reposo. <Minutos>",
|
||||
"Tiempo hasta apagado. <Minutos>",
|
||||
"Sensibilidad del movimiento. <0=Apagado 1=El menos sensible 9=El más sensible>",
|
||||
"Unidad de temperatura.",
|
||||
"Mostrar información detallada en el reposo.", //Detailed Information
|
||||
"Orientación de la pantalla <A=Automático I=Mano izquierda D=Mano derecha>",
|
||||
"Activar el botón \"Boost\" en modo soldadura.",
|
||||
"Temperatura en modo \"Boost\". <C>",
|
||||
"Iniciar modo soldadura en el encendido. <V=Sí S=Modo reposo F=No>",
|
||||
"Parpadea la temperatura en el enfriamiento si la punta sigue caliente."
|
||||
"Calibrar punta.",//Calibrate Tip
|
||||
"Resetear ajustes.",//Reset Settings
|
||||
"Calibración VIN. Los botones lo ajustan. Pulsación larga para salir.",//VIN Cal
|
||||
"Mostrar información detallada mientras suelda.",//ADV SLD
|
||||
};
|
||||
|
||||
const char* SettingsCalibrationWarning = "¡Por favor, asegúrese que la punta está a temperatura ambiente antes de continuar!";
|
||||
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
|
||||
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
|
||||
const char* SleepingAdvancedString = "Sleeping...";// <=17 chars
|
||||
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
|
||||
const char* WarningAdvancedString = "WARNING! TIP HOT!";
|
||||
|
||||
const char SettingTrueChar = 'V';// True in Spanish is "Verdadero"
|
||||
const char SettingFalseChar = 'F';
|
||||
const char SettingRightChar = 'D';// Right is "Derecha"
|
||||
const char SettingLeftChar = 'I';// Left is "Izquierda"
|
||||
const char SettingAutoChar = 'A';
|
||||
#endif
|
||||
#ifdef LANG_SE
|
||||
const char* SettingsLongNames[16] = {
|
||||
/*These are all the help text for all the settings.*/
|
||||
/*No requirements on spacing or length*/
|
||||
"Источник питания. Установка напряжения отключения. <DC 10V> <S 3.3 V на батарею>", //Cell count
|
||||
"Температура Сна <С>",//Sleep Temp
|
||||
"Переход в режим Сна <Минуты>",//Sleep timeout
|
||||
"Переходит в режим ожидания <Минуты>",//Shutdown timeout
|
||||
"Акселерометр <0. Выкл. 1. мин. чувствительный 9. макс. чувствительный>",//Sensitivity
|
||||
"В чем измерять температуру",//Temp Unit
|
||||
"Display detailed information in a smaller font on the idle screen.",//Detailed Information
|
||||
"Ориентация Дисплея <A. Автоматический L. Левая Рука R. Правая Рука>",//Orientation
|
||||
"Активация кнопки A для Турбо режима до 450С при пайке ",//Boost enable
|
||||
"Установка температуры для Турбо режима",//Boost temp
|
||||
"Автоматический запуск паяльника при включении питания. T=Нагрев, S= Режим Сна,F=Выкл.",//Auto start
|
||||
"Мигает температура на экране охлаждения, пока жало остается горячим."//Cooling blink
|
||||
"Calibrate tip offset.",//Calibrate Tip
|
||||
"Reset all settings",//Reset Settings
|
||||
"VIN Calibration. Buttons adjust, long press to exit",//VIN Cal
|
||||
"Display detailed information while soldering",//ADV SLD
|
||||
// These are all the help text for all the settings.
|
||||
// No requirements on spacing or length.
|
||||
/* Power source (DC or batt) */"Fuente de energía. Ajusta el límite inferior de voltaje. <DC=10V S=3.3V por celda>",
|
||||
/* Sleep temperature */"Temperatura en reposo. <C>",
|
||||
/* Sleep timeout */"Tiempo hasta activar reposo. <Minutos>",
|
||||
/* Shutdown timeout */"Tiempo hasta apagado. <Minutos>",
|
||||
/* Motion sensitivity level */"Sensibilidad del movimiento. <0=Apagado 1=El menos sensible 9=El más sensible>",
|
||||
/* Temperature in F and C */"Unidad de temperatura.",
|
||||
/* Advanced idle display mode enabled */"Display detailed information in a smaller font on the idle screen.",
|
||||
/* Display rotation mode */"Orientación de la pantalla <A=Automático I=Mano izquierda D=Mano derecha>",
|
||||
/* Boost enabled */"Activar el botón \"Boost\" en modo soldadura.",
|
||||
/* Boost temperature */"Temperatura en modo \"Boost\". <C>",
|
||||
/* Automatic start mode */"Iniciar modo soldadura en el encendido. <V=Sí S=Modo reposo F=No>",
|
||||
/* Cooldown blink */"Parpadea la temperatura en el enfriamiento si la punta sigue caliente."
|
||||
/* Temperature calibration enter menu */"Calibrate tip offset.",
|
||||
/* Settings reset command */"Reset all settings",
|
||||
/* Calibrate input voltage */"VIN Calibration. Buttons adjust, long press to exit",
|
||||
/* Advanced soldering screen enabled */"Display detailed information while soldering",
|
||||
};
|
||||
|
||||
const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
|
||||
@@ -147,27 +196,104 @@ const char SettingFalseChar = 'F';
|
||||
const char SettingRightChar = 'R';
|
||||
const char SettingLeftChar = 'L';
|
||||
const char SettingAutoChar = 'A';
|
||||
|
||||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||||
const char* SettingsShortNames[16][2] = {
|
||||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||||
/* (<= 4) Sleep temperature */{"STMP"},
|
||||
/* (<= 4) Sleep timeout */{"STME"},
|
||||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||||
/* (<= 6) Boost enabled */{"BOOST"},
|
||||
/* (<= 4) Boost temperature */{"BTMP"},
|
||||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||||
/* (<= 8) Settings reset command */{"RESET?"},
|
||||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef LANG_SE
|
||||
const char* SettingsLongNames[16] = {
|
||||
// These are all the help text for all the settings.
|
||||
// No requirements on spacing or length.
|
||||
/* Power source (DC or batt) */"Источник питания. Установка напряжения отключения. <DC 10V> <S 3.3 V на батарею>",
|
||||
/* Sleep temperature */"Температура Сна <С>",
|
||||
/* Sleep timeout */"Переход в режим Сна <Минуты>",
|
||||
/* Shutdown timeout */"Переходит в режим ожидания <Минуты>",
|
||||
/* Motion sensitivity level */"Акселерометр <0. Выкл. 1. мин. чувствительный 9. макс. чувствительный>",
|
||||
/* Temperature in F and C */"В чем измерять температуру",
|
||||
/* Advanced idle display mode enabled */"Display detailed information in a smaller font on the idle screen.",
|
||||
/* Display rotation mode */"Ориентация Дисплея <A. Автоматический L. Левая Рука R. Правая Рука>",
|
||||
/* Boost enabled */"Активация кнопки A для Турбо режима до 450С при пайке ",
|
||||
/* Boost temperature */"Установка температуры для Турбо режима",
|
||||
/* Automatic start mode */"Автоматический запуск паяльника при включении питания. T=Нагрев, S= Режим Сна,F=Выкл.",
|
||||
/* Cooldown blink */"Мигает температура на экране охлаждения, пока жало остается горячим."
|
||||
/* Temperature calibration enter menu */"Calibrate tip offset.",
|
||||
/* Settings reset command */"Reset all settings",
|
||||
/* Calibrate input voltage */"VIN Calibration. Buttons adjust, long press to exit",
|
||||
/* Advanced soldering screen enabled */"Display detailed information while soldering",
|
||||
};
|
||||
|
||||
const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
|
||||
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
|
||||
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
|
||||
const char* SleepingAdvancedString = "Sleeping...";// <=17 chars
|
||||
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
|
||||
const char* WarningAdvancedString = "WARNING! TIP HOT!";
|
||||
|
||||
const char SettingTrueChar = 'T';
|
||||
const char SettingFalseChar = 'F';
|
||||
const char SettingRightChar = 'R';
|
||||
const char SettingLeftChar = 'L';
|
||||
const char SettingAutoChar = 'A';
|
||||
|
||||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||||
const char* SettingsShortNames[16][2] = {
|
||||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||||
/* (<= 4) Sleep temperature */{"STMP"},
|
||||
/* (<= 4) Sleep timeout */{"STME"},
|
||||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||||
/* (<= 6) Boost enabled */{"BOOST"},
|
||||
/* (<= 4) Boost temperature */{"BTMP"},
|
||||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||||
/* (<= 8) Settings reset command */{"RESET?"},
|
||||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef LANG_IT
|
||||
const char* SettingsLongNames[16] = {
|
||||
/*These are all the help text for all the settings.*/
|
||||
/*No requirements on spacing or length*/
|
||||
"Sorgente di alimentazione; imposta il limite minimo di tensione <DC: 10V; S: 3.3V per cella>",
|
||||
"Temperatura standby <°C>",
|
||||
"Timeout standby <minuti/secondi>",
|
||||
"Timeout spegnimento <minuti>",
|
||||
"Sensibilità al movimento <0: nessuna; 1: minima; 9: massima>",
|
||||
"Unità di misura della temperatura <C: Celsius; F: Farenheit>",
|
||||
"Mostra informazioni dettagliate con un carattere più piccolo sulla schermata di inattività",
|
||||
"Orientamento del display <A: automatico; S: mano sinistra; D: mano destra>",
|
||||
"Il tasto anteriore attiva la modalità \"boost\" durante la saldatura",
|
||||
"Temperatura in modalità \"boost\"",
|
||||
"Attiva automaticamente il saldatore quando viene alimentato <A: saldatura; S: standby; D: disattiva>",
|
||||
"Durante il raffreddamento mostra la temperatura sul display se la punta è ancora calda"
|
||||
"Calibra l'offset della punta", //Calibrate Tip
|
||||
"Ripristina tutte le impostazioni",//Reset Settings
|
||||
"Calibra la tensione in entrata; regola con i bottoni, tieni permuto per uscire",//VIN Cal
|
||||
"Mostra informazioni dettagliate mentre stai saldando",//ADV SLD
|
||||
// These are all the help text for all the settings.
|
||||
// No requirements on spacing or length.
|
||||
/* Power source (DC or batt) */"Sorgente di alimentazione; imposta il limite minimo di tensione <DC: 10V; S: 3.3V per cella>",
|
||||
/* Sleep temperature */"Temperatura standby <°C>",
|
||||
/* Sleep timeout */"Timeout standby <minuti/secondi>",
|
||||
/* Shutdown timeout */"Timeout spegnimento <minuti>",
|
||||
/* Motion sensitivity level */"Sensibilità al movimento <0: nessuna; 1: minima; 9: massima>",
|
||||
/* Temperature in F and C */"Unità di misura della temperatura <C: Celsius; F: Farenheit>",
|
||||
/* Advanced idle display mode enabled */"Mostra informazioni dettagliate con un carattere più piccolo sulla schermata di inattività",
|
||||
/* Display rotation mode */"Orientamento del display <A: automatico; S: mano sinistra; D: mano destra>",
|
||||
/* Boost enabled */"Il tasto anteriore attiva la modalità \"boost\" durante la saldatura",
|
||||
/* Boost temperature */"Temperatura in modalità \"boost\"",
|
||||
/* Automatic start mode */"Attiva automaticamente il saldatore quando viene alimentato <A: saldatura; S: standby; D: disattiva>",
|
||||
/* Cooldown blink */"Durante il raffreddamento mostra la temperatura sul display se la punta è ancora calda"
|
||||
/* Temperature calibration enter menu */"Calibra l'offset della punta",
|
||||
/* Settings reset command */"Ripristina tutte le impostazioni",
|
||||
/* Calibrate input voltage */"Calibra la tensione in entrata; regola con i bottoni, tieni permuto per uscire",
|
||||
/* Advanced soldering screen enabled */"Mostra informazioni dettagliate mentre stai saldando",
|
||||
};
|
||||
|
||||
const char* SettingsCalibrationWarning = "Assicurati che la punta si trovi a temperatura ambiente prima di continuare!";
|
||||
@@ -182,27 +308,48 @@ const char SettingFalseChar = 'D';
|
||||
const char SettingRightChar = 'D';
|
||||
const char SettingLeftChar = 'S';
|
||||
const char SettingAutoChar = 'A';
|
||||
|
||||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||||
const char* SettingsShortNames[16][2] = {
|
||||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||||
/* (<= 4) Sleep temperature */{"STMP"},
|
||||
/* (<= 4) Sleep timeout */{"STME"},
|
||||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||||
/* (<= 6) Boost enabled */{"BOOST"},
|
||||
/* (<= 4) Boost temperature */{"BTMP"},
|
||||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||||
/* (<= 8) Settings reset command */{"RESET?"},
|
||||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef LANG_FR
|
||||
const char* SettingsLongNames[16] = {
|
||||
/*These are all the help text for all the settings.*/
|
||||
/*No requirements on spacing or length*/
|
||||
"Type d\'alimentation. Regle la tension de coupure. <DC=10V S=3.3V par cellules>",
|
||||
"Temperature en veille. <C>",
|
||||
"Temps avant mise en veille. <Minutes>",
|
||||
"Temps avant extinction. <Minutes>",
|
||||
"Sensibilitee du capteur de mouvement. <0=Inactif 1=Peu sensible 9=Tres sensible>",
|
||||
"Unitee de temperature.",
|
||||
"Afficher des informations detaillees en petit lors de la veille", //Detailed Information
|
||||
"Orientation de l\'affichage. <A=Automatique G=Gaucher D=Droitier>",
|
||||
"Active le mode \"Boost\" 450C sur le bouton de devant pendant la soudure.",
|
||||
"Temperature du mode \"Boost\". <C>",
|
||||
"Demarre automatiquement la soudure a l\'allumage. <A=Active, V=Mode Veille, D=Desactive>",
|
||||
"Fait clignotter la temperature lors du refroidissement pendant que la panne est chaude."
|
||||
"Compenser l\'erreur de la panne",//Calibrate Tip
|
||||
"Reinitialiser tout les reglages",//Reset Settings
|
||||
"Calibration VIN. Boutons pour ajuster, appui long pour quitter",//VIN Cal
|
||||
"Afficher des informations detaillees pendant la soudure",//ADV SLD
|
||||
// These are all the help text for all the settings.
|
||||
// No requirements on spacing or length.
|
||||
/* Power source (DC or batt) */"Type d\'alimentation. Regle la tension de coupure. <DC=10V S=3.3V par cellules>",
|
||||
/* Sleep temperature */"Temperature en veille. <C>",
|
||||
/* Sleep timeout */"Temps avant mise en veille. <Minutes>",
|
||||
/* Shutdown timeout */"Temps avant extinction. <Minutes>",
|
||||
/* Motion sensitivity level */"Sensibilitee du capteur de mouvement. <0=Inactif 1=Peu sensible 9=Tres sensible>",
|
||||
/* Temperature in F and C */"Unitee de temperature.",
|
||||
/* Advanced idle display mode enabled */"Afficher des informations detaillees en petit lors de la veille",
|
||||
/* Display rotation mode */"Orientation de l\'affichage. <A=Automatique G=Gaucher D=Droitier>",
|
||||
/* Boost enabled */"Active le mode \"Boost\" 450C sur le bouton de devant pendant la soudure.",
|
||||
/* Boost temperature */"Temperature du mode \"Boost\". <C>",
|
||||
/* Automatic start mode */"Demarre automatiquement la soudure a l\'allumage. <A=Active, V=Mode Veille, D=Desactive>",
|
||||
/* Cooldown blink */"Fait clignotter la temperature lors du refroidissement pendant que la panne est chaude."
|
||||
/* Temperature calibration enter menu */"Compenser l\'erreur de la panne",
|
||||
/* Settings reset command */"Reinitialiser tout les reglages",
|
||||
/* Calibrate input voltage */"Calibration VIN. Boutons pour ajuster, appui long pour quitter",
|
||||
/* Advanced soldering screen enabled */"Afficher des informations detaillees pendant la soudure",
|
||||
};
|
||||
|
||||
const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
|
||||
@@ -217,27 +364,48 @@ const char SettingFalseChar = 'F';
|
||||
const char SettingRightChar = 'R';
|
||||
const char SettingLeftChar = 'L';
|
||||
const char SettingAutoChar = 'A';
|
||||
|
||||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||||
const char* SettingsShortNames[16][2] = {
|
||||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||||
/* (<= 4) Sleep temperature */{"STMP"},
|
||||
/* (<= 4) Sleep timeout */{"STME"},
|
||||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||||
/* (<= 6) Boost enabled */{"BOOST"},
|
||||
/* (<= 4) Boost temperature */{"BTMP"},
|
||||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||||
/* (<= 8) Settings reset command */{"RESET?"},
|
||||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef LANG_DE
|
||||
const char* SettingsLongNames[16] = {
|
||||
/*These are all the help text for all the settings.*/
|
||||
/*No requirements on spacing or length*/
|
||||
"Spannungsquelle (Abschaltspannung) <DC=10V, nS=n*3.3V für n LiIon-Zellen>",
|
||||
"Ruhetemperatur (In der eingestellten Einheit)",
|
||||
"Ruhemodus nach <Sekunden/Minuten>",
|
||||
"Abschaltzeit <Minuten>",
|
||||
"Bewegungsempfindlichkeit <0=Aus, 1=Minimal ... 9=Maximal>",
|
||||
"Temperatureinheit <C=Celsius, F=Fahrenheit>",
|
||||
"Detaillierte Anzeige im Ruhemodus <T=An, F=Aus>", //Detailed Information
|
||||
"Ausrichtung der Anzeige <A=Auto, L=Linkshändig, R=Rechtshändig>",
|
||||
"Vordere Taste für Temperaturboost verwenden <T=An, F=Aus>",
|
||||
"Temperatur im Boostmodus (In der eingestellten Einheit)",
|
||||
"Automatischer Start des Lötmodus beim Einschalten der Spannungsversorgung. <T=An, F=Aus>",
|
||||
"Blinkende Temperaturanzeige beim Abkühlen, solange heiß. <T=An, F=Aus>"
|
||||
"Kalibrierung der Lötspitzentemperatur",//Calibrate Tip
|
||||
"Alle Einstellungen zurücksetzen",//Reset Settings
|
||||
"Kalibrierung der Eingangsspannung. Kurzer Tastendruck zum Einstellen, langer Tastendruck zum Verlassen.",//VIN Cal
|
||||
"Detaillierte Anzeige im Lötmodus <T=An, F=Aus>",//ADV SLD
|
||||
// These are all the help text for all the settings.
|
||||
// No requirements on spacing or length.
|
||||
/* Power source (DC or batt) */"Spannungsquelle (Abschaltspannung) <DC=10V, nS=n*3.3V für n LiIon-Zellen>",
|
||||
/* Sleep temperature */"Ruhetemperatur (In der eingestellten Einheit)",
|
||||
/* Sleep timeout */"Ruhemodus nach <Sekunden/Minuten>",
|
||||
/* Shutdown timeout */"Abschaltzeit <Minuten>",
|
||||
/* Motion sensitivity level */"Bewegungsempfindlichkeit <0=Aus, 1=Minimal ... 9=Maximal>",
|
||||
/* Temperature in F and C */"Temperatureinheit <C=Celsius, F=Fahrenheit>",
|
||||
/* Advanced idle display mode enabled */"Detaillierte Anzeige im Ruhemodus <T=An, F=Aus>",
|
||||
/* Display rotation mode */"Ausrichtung der Anzeige <A=Auto, L=Linkshändig, R=Rechtshändig>",
|
||||
/* Boost enabled */"Vordere Taste für Temperaturboost verwenden <T=An, F=Aus>",
|
||||
/* Boost temperature */"Temperatur im Boostmodus (In der eingestellten Einheit)",
|
||||
/* Automatic start mode */"Automatischer Start des Lötmodus beim Einschalten der Spannungsversorgung. <T=An, F=Aus>",
|
||||
/* Cooldown blink */"Blinkende Temperaturanzeige beim Abkühlen, solange heiß. <T=An, F=Aus>"
|
||||
/* Temperature calibration enter menu */"Kalibrierung der Lötspitzentemperatur",
|
||||
/* Settings reset command */"Alle Einstellungen zurücksetzen",
|
||||
/* Calibrate input voltage */"Kalibrierung der Eingangsspannung. Kurzer Tastendruck zum Einstellen, langer Tastendruck zum Verlassen.",
|
||||
/* Advanced soldering screen enabled */"Detaillierte Anzeige im Lötmodus <T=An, F=Aus>",
|
||||
};
|
||||
|
||||
const char* SettingsCalibrationWarning = "Vor dem Fortfahren muss die Lötspitze vollständig abgekühlt sein!";
|
||||
@@ -252,27 +420,48 @@ const char SettingFalseChar = 'F';
|
||||
const char SettingRightChar = 'R';
|
||||
const char SettingLeftChar = 'L';
|
||||
const char SettingAutoChar = 'A';
|
||||
|
||||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||||
const char* SettingsShortNames[16][2] = {
|
||||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||||
/* (<= 4) Sleep temperature */{"STMP"},
|
||||
/* (<= 4) Sleep timeout */{"STME"},
|
||||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||||
/* (<= 6) Boost enabled */{"BOOST"},
|
||||
/* (<= 4) Boost temperature */{"BTMP"},
|
||||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||||
/* (<= 8) Settings reset command */{"RESET?"},
|
||||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef LANG_SK
|
||||
const char* SettingsLongNames[16] = {
|
||||
/*These are all the help text for all the settings.*/
|
||||
/*No requirements on spacing or length*/
|
||||
"Zdroj napatia. Nastavit napatie pre vypnutie (cutoff) <DC=10V, nS=n*3.3V pre LiIon clanky>",
|
||||
"Kludova teplota (v nastavenych jednotkach)",
|
||||
"Kludovy rezim po <sekundach/minutach>",
|
||||
"Cas na vypnutie <minuty>",
|
||||
"Citlivost detekcie pohybu <0=Vyp, 1=Min ... 9=Max>",
|
||||
"Jednotky merania teploty <C=stupne Celzia, F=stupne Fahrenheita>",
|
||||
"Zobrazit detailne informacie v kludovom rezime <T=Zap, F=Vyp>", //Detailed Information
|
||||
"Orientacia displeja <A=Auto, L=Lavak, R=Pravak>",
|
||||
"Povolit tlacidlo pre prudky nahrev <T=Zap, F=Vyp>",
|
||||
"Cielova teplota pre prudky nahrev (v nastavenych jednotkach)",
|
||||
"Pri starte spustit rezim spajkovania <T=Zap, F=Vyp, S=Spanok>",
|
||||
"Blikanie ukazovatela teploty pocas chladnutia hrotu <T=Zap, F=Vyp>"
|
||||
"Kalibracia posunu hrotu",//Calibrate Tip
|
||||
"Tovarenske nastavenia",//Reset Settings
|
||||
"Kalibracia VIN. Kratke stlacenie meni nastavenie, dlhe stlacenie pre navrat",//VIN Cal
|
||||
"Zobrazenie detailov pocas spajkovania <T=Zap, F=Vyp>",//ADV SLD
|
||||
// These are all the help text for all the settings.
|
||||
// No requirements on spacing or length.
|
||||
/* Power source (DC or batt) */"Zdroj napatia. Nastavit napatie pre vypnutie (cutoff) <DC=10V, nS=n*3.3V pre LiIon clanky>",
|
||||
/* Sleep temperature */"Kludova teplota (v nastavenych jednotkach)",
|
||||
/* Sleep timeout */"Kludovy rezim po <sekundach/minutach>",
|
||||
/* Shutdown timeout */"Cas na vypnutie <minuty>",
|
||||
/* Motion sensitivity level */"Citlivost detekcie pohybu <0=Vyp, 1=Min ... 9=Max>",
|
||||
/* Temperature in F and C */"Jednotky merania teploty <C=stupne Celzia, F=stupne Fahrenheita>",
|
||||
/* Advanced idle display mode enabled */"Zobrazit detailne informacie v kludovom rezime <T=Zap, F=Vyp>",
|
||||
/* Display rotation mode */"Orientacia displeja <A=Auto, L=Lavak, R=Pravak>",
|
||||
/* Boost enabled */"Povolit tlacidlo pre prudky nahrev <T=Zap, F=Vyp>",
|
||||
/* Boost temperature */"Cielova teplota pre prudky nahrev (v nastavenych jednotkach)",
|
||||
/* Automatic start mode */"Pri starte spustit rezim spajkovania <T=Zap, F=Vyp, S=Spanok>",
|
||||
/* Cooldown blink */"Blikanie ukazovatela teploty pocas chladnutia hrotu <T=Zap, F=Vyp>"
|
||||
/* Temperature calibration enter menu */"Kalibracia posunu hrotu",
|
||||
/* Settings reset command */"Tovarenske nastavenia",
|
||||
/* Calibrate input voltage */"Kalibracia VIN. Kratke stlacenie meni nastavenie, dlhe stlacenie pre navrat",
|
||||
/* Advanced soldering screen enabled */"Zobrazenie detailov pocas spajkovania <T=Zap, F=Vyp>",
|
||||
};
|
||||
|
||||
const char* SettingsCalibrationWarning = "Najprv sa prosim uistite, ze hrot ma izbovu teplotu!";
|
||||
@@ -287,27 +476,48 @@ const char SettingFalseChar = 'F';
|
||||
const char SettingRightChar = 'R';
|
||||
const char SettingLeftChar = 'L';
|
||||
const char SettingAutoChar = 'A';
|
||||
|
||||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||||
const char* SettingsShortNames[16][2] = {
|
||||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||||
/* (<= 4) Sleep temperature */{"STMP"},
|
||||
/* (<= 4) Sleep timeout */{"STME"},
|
||||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||||
/* (<= 6) Boost enabled */{"BOOST"},
|
||||
/* (<= 4) Boost temperature */{"BTMP"},
|
||||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||||
/* (<= 8) Settings reset command */{"RESET?"},
|
||||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef LANG_TR
|
||||
const char* SettingsLongNames[16] = {
|
||||
/*These are all the help text for all the settings.*/
|
||||
/*No requirements on spacing or length*/
|
||||
"Güç Kaynağı. kesim geriliminı ayarlar. <DC 10V> <S 3.3V hücre başına>", //Power Source
|
||||
"Uyku Sıcaklığı <C>",//Sleep Temp
|
||||
"Uyku Zaman Aşımı <Dakika/Saniye>",//Sleep Timeout
|
||||
"Kapatma Zaman Aşımı <Dakika>",//Shutdown Time
|
||||
"Hareket Hassasiyeti <0.Kapalı 1.En az duyarlı 9.En duyarlı>",//Motion Sensitivity
|
||||
"Sıcaklık Ünitesi <C=Celsius F=Fahrenheit>",//Temp Unit
|
||||
"Boş ekranda ayrıntılı bilgileri daha küçük bir yazı tipi ile göster.",//Detailed Information
|
||||
"Görüntü Yönlendirme <A. Otomatik L. Solak R. Sağlak>",//Orientation
|
||||
"Lehimleme yaparken ön tuşa basmak Boost moduna sokar(450C)",//Boost enable
|
||||
"\"boost\" Modu Derecesi",//Boost Temp
|
||||
"Güç verildiğinde otomatik olarak lehimleme modunda başlat. T=Lehimleme Modu, S= Uyku Modu,F=Kapalı",//Auto start
|
||||
"Soğutma ekranında uç hala sıcakken derece yanıp sönsün.",//Cooling Blink
|
||||
"Ucu kalibre et.",//Calibrate Tip
|
||||
"Bütün ayarları sıfırla",//Reset Settings
|
||||
"VIN Kalibrasyonu. Düğmeler ayarlar, çıkmak için uzun bas.",//VIN Cal
|
||||
"Lehimleme yaparken detaylı bilgi göster",//ADV SLD
|
||||
// These are all the help text for all the settings.
|
||||
// No requirements on spacing or length.
|
||||
/* Power source (DC or batt) */"Güç Kaynağı. kesim geriliminı ayarlar. <DC 10V> <S 3.3V hücre başına>",
|
||||
/* Sleep temperature */"Uyku Sıcaklığı <C>",
|
||||
/* Sleep timeout */"Uyku Zaman Aşımı <Dakika/Saniye>",
|
||||
/* Shutdown timeout */"Kapatma Zaman Aşımı <Dakika>",
|
||||
/* Motion sensitivity level */"Hareket Hassasiyeti <0.Kapalı 1.En az duyarlı 9.En duyarlı>",
|
||||
/* Temperature in F and C */"Sıcaklık Ünitesi <C=Celsius F=Fahrenheit>",
|
||||
/* Advanced idle display mode enabled */"Boş ekranda ayrıntılı bilgileri daha küçük bir yazı tipi ile göster.",
|
||||
/* Display rotation mode */"Görüntü Yönlendirme <A. Otomatik L. Solak R. Sağlak>",
|
||||
/* Boost enabled */"Lehimleme yaparken ön tuşa basmak Boost moduna sokar(450C)",
|
||||
/* Boost temperature */"\"boost\" Modu Derecesi",
|
||||
/* Automatic start mode */"Güç verildiğinde otomatik olarak lehimleme modunda başlat. T=Lehimleme Modu, S= Uyku Modu,F=Kapalı",
|
||||
/* Cooldown blink */"Soğutma ekranında uç hala sıcakken derece yanıp sönsün.",
|
||||
/* Temperature calibration enter menu */"Ucu kalibre et.",
|
||||
/* Settings reset command */"Bütün ayarları sıfırla",
|
||||
/* Calibrate input voltage */"VIN Kalibrasyonu. Düğmeler ayarlar, çıkmak için uzun bas.",
|
||||
/* Advanced soldering screen enabled */"Lehimleme yaparken detaylı bilgi göster",
|
||||
};
|
||||
|
||||
const char* SettingsCalibrationWarning = "Lütfen devam etmeden önce ucun oda sıcaklığında olduğunu garantiye alın!";
|
||||
@@ -322,27 +532,48 @@ const char SettingFalseChar = 'F';
|
||||
const char SettingRightChar = 'R';
|
||||
const char SettingLeftChar = 'L';
|
||||
const char SettingAutoChar = 'A';
|
||||
|
||||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||||
const char* SettingsShortNames[16][2] = {
|
||||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||||
/* (<= 4) Sleep temperature */{"STMP"},
|
||||
/* (<= 4) Sleep timeout */{"STME"},
|
||||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||||
/* (<= 6) Boost enabled */{"BOOST"},
|
||||
/* (<= 4) Boost temperature */{"BTMP"},
|
||||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||||
/* (<= 8) Settings reset command */{"RESET?"},
|
||||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef LANG_HR
|
||||
const char* SettingsLongNames[16] = {
|
||||
/*These are all the help text for all the settings.*/
|
||||
/*No requirements on spacing or length*/
|
||||
"Izvor napajanja. Postavlja napon iskljucivanja. <DC 10V> <S 3.3V po celiji>", //Power Source
|
||||
"Temperatura spavanja. <C>",//Sleep Temp
|
||||
"Vrijeme spavanja. <Minute/Sekunde>",//Sleep Timeout
|
||||
"Vrijeme gasenja. <Minutes>",//Shutdown Time
|
||||
"Osjetljivost prepoznavanja pokreta. <0=Ugaseno, 1=Najmanje osjetljivo, 9=Najosjetljivije>",//Motion Sensitivity
|
||||
"Jedinica temperature. <C=Celzij, F=Fahrenheit>",//Temp Unit
|
||||
"Prikazivanje detaljnih informacija manjim fontom tijekom cekanja.",//Detailed Information
|
||||
"Orijentacija ekrana. <A=Automatski, L=Ljevoruki, D=Desnoruki>",//Orientation
|
||||
"Prednji gumb prilikom lemljenja aktivira pojacani (Boost) nacin.",//Boost enable
|
||||
"Temperatura u pojacanom (Boost) nacinu.",//Boost Temp
|
||||
"Nacin u kojemu se lemilica pokrece po ukljucivanju napajanja. <+=Lemljenje, S=Spavanje, -=Ugaseno>",//Auto start
|
||||
"Bljeskanje temperature prilikom hladjenja, ako je lemilica vruca.",//Cooling Blink
|
||||
"Kalibriranje temperature vrha.",//Calibrate Tip
|
||||
"Vracanje svih postavki.",//Reset Settings
|
||||
"Kalibracija ulaznog napona. Podesavanje gumbima, dugacki pritisak za kraj.",//VIN Cal
|
||||
"Prikazivanje detaljnih informacija tijekom lemljenja.",//ADV SLD
|
||||
// These are all the help text for all the settings.
|
||||
// No requirements on spacing or length.
|
||||
/* Power source (DC or batt) */"Izvor napajanja. Postavlja napon iskljucivanja. <DC 10V> <S 3.3V po celiji>",
|
||||
/* Sleep temperature */"Temperatura spavanja. <C>",
|
||||
/* Sleep timeout */"Vrijeme spavanja. <Minute/Sekunde>",
|
||||
/* Shutdown timeout */"Vrijeme gasenja. <Minutes>",
|
||||
/* Motion sensitivity level */"Osjetljivost prepoznavanja pokreta. <0=Ugaseno, 1=Najmanje osjetljivo, 9=Najosjetljivije>",
|
||||
/* Temperature in F and C */"Jedinica temperature. <C=Celzij, F=Fahrenheit>",
|
||||
/* Advanced idle display mode enabled */"Prikazivanje detaljnih informacija manjim fontom tijekom cekanja.",
|
||||
/* Display rotation mode */"Orijentacija ekrana. <A=Automatski, L=Ljevoruki, D=Desnoruki>",
|
||||
/* Boost enabled */"Prednji gumb prilikom lemljenja aktivira pojacani (Boost) nacin.",
|
||||
/* Boost temperature */"Temperatura u pojacanom (Boost) nacinu.",
|
||||
/* Automatic start mode */"Nacin u kojemu se lemilica pokrece po ukljucivanju napajanja. <+=Lemljenje, S=Spavanje, -=Ugaseno>",
|
||||
/* Cooldown blink */"Bljeskanje temperature prilikom hladjenja, ako je lemilica vruca.",
|
||||
/* Temperature calibration enter menu */"Kalibriranje temperature vrha.",
|
||||
/* Settings reset command */"Vracanje svih postavki.",
|
||||
/* Calibrate input voltage */"Kalibracija ulaznog napona. Podesavanje gumbima, dugacki pritisak za kraj.",
|
||||
/* Advanced soldering screen enabled */"Prikazivanje detaljnih informacija tijekom lemljenja.",
|
||||
};
|
||||
|
||||
const char* SettingsCalibrationWarning = "Provjerite da je vrh ohladjen na sobnu temperaturu prije nego sto nastavite!";
|
||||
@@ -357,6 +588,26 @@ const char SettingFalseChar = '-';
|
||||
const char SettingRightChar = 'D';
|
||||
const char SettingLeftChar = 'L';
|
||||
const char SettingAutoChar = 'A';
|
||||
|
||||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||||
const char* SettingsShortNames[16][2] = {
|
||||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||||
/* (<= 4) Sleep temperature */{"STMP"},
|
||||
/* (<= 4) Sleep timeout */{"STME"},
|
||||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||||
/* (<= 6) Boost enabled */{"BOOST"},
|
||||
/* (<= 4) Boost temperature */{"BTMP"},
|
||||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||||
/* (<= 8) Settings reset command */{"RESET?"},
|
||||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef LANG_CS_CZ
|
||||
@@ -393,7 +644,28 @@ const char SettingFalseChar = 'V';
|
||||
const char SettingRightChar = 'P';
|
||||
const char SettingLeftChar = 'L';
|
||||
const char SettingAutoChar = 'A';
|
||||
|
||||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||||
const char* SettingsShortNames[16][2] = {
|
||||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||||
/* (<= 4) Sleep temperature */{"STMP"},
|
||||
/* (<= 4) Sleep timeout */{"STME"},
|
||||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||||
/* (<= 6) Boost enabled */{"BOOST"},
|
||||
/* (<= 4) Boost temperature */{"BTMP"},
|
||||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||||
/* (<= 8) Settings reset command */{"RESET?"},
|
||||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef LANG_HUN
|
||||
const char* SettingsLongNames[16] = {
|
||||
/*These are all the help text for all the settings.*/
|
||||
@@ -428,35 +700,55 @@ const char SettingFalseChar = 'F';
|
||||
const char SettingRightChar = 'R';
|
||||
const char SettingLeftChar = 'L';
|
||||
const char SettingAutoChar = 'A';
|
||||
|
||||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||||
const char* SettingsShortNames[16][2] = {
|
||||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||||
/* (<= 4) Sleep temperature */{"STMP"},
|
||||
/* (<= 4) Sleep timeout */{"STME"},
|
||||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||||
/* (<= 6) Boost enabled */{"BOOST"},
|
||||
/* (<= 4) Boost temperature */{"BTMP"},
|
||||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||||
/* (<= 8) Settings reset command */{"RESET?"},
|
||||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef LANG_TR
|
||||
const char* SettingsLongNames[16] = {
|
||||
/*These are all the help text for all the settings.*/
|
||||
/*No requirements on spacing or length*/
|
||||
"Güç Kaynağı. kesim geriliminı ayarlar. <DC 10V> <S 3.3V hücre başına>", //Power Source
|
||||
"Uyku Sıcaklığı <C>", //Sleep Temp
|
||||
"Uyku Zaman Aşımı <Dakika/Saniye>", //Sleep Timeout
|
||||
"Kapatma Zaman Aşımı <Dakika>", //Shutdown Time
|
||||
"Hareket Hassasiyeti <0.Kapalı 1.En az duyarlı 9.En duyarlı>", //Motion Sensitivity
|
||||
"Sıcaklık Ünitesi <C=Celsius F=Fahrenheit>", //Temp Unit
|
||||
"Boş ekranda ayrıntılı bilgileri daha küçük bir yazı tipi ile göster.", //Detailed Information
|
||||
"Görüntü Yönlendirme <A. Otomatik L. Solak R. Sağlak>", //Orientation
|
||||
"Lehimleme yaparken ön tuşa basmak Boost moduna sokar(450C)", //Boost enable
|
||||
"\"boost\" Modu Derecesi", //Boost Temp
|
||||
"Güç verildiğinde otomatik olarak lehimleme modunda başlat. T=Lehimleme Modu, S= Uyku Modu,F=Kapalı", //Auto start
|
||||
"Soğutma ekranında uç hala sıcakken derece yanıp sönsün.", //Cooling Blink
|
||||
"Ucu kalibre et.", //Calibrate Tip
|
||||
"Bütün ayarları sıfırla", //Reset Settings
|
||||
"VIN Kalibrasyonu. Düğmeler ayarlar, çıkmak için uzun bas.", //VIN Cal
|
||||
"Lehimleme yaparken detaylı bilgi göster", //ADV SLD
|
||||
};
|
||||
/*These are all the help text for all the settings.*/
|
||||
/*No requirements on spacing or length*/
|
||||
/* Power source (DC or batt) */"Güç Kaynağı. kesim geriliminı ayarlar. <DC 10V> <S 3.3V hücre başına>", //Power Source
|
||||
/* Sleep temperature */"Uyku Sıcaklığı <C>",//Sleep Temp
|
||||
/* Sleep timeout */"Uyku Zaman Aşımı <Dakika/Saniye>",//Sleep Timeout
|
||||
/* Shutdown timeout */"Kapatma Zaman Aşımı <Dakika>",//Shutdown Time
|
||||
/* Motion sensitivity level */"Hareket Hassasiyeti <0.Kapalı 1.En az duyarlı 9.En duyarlı>",//Motion Sensitivity
|
||||
/* Temperature in F and C */"Sıcaklık Ünitesi <C=Celsius F=Fahrenheit>",//Temp Unit
|
||||
/* Advanced idle display mode enabled */"Boş ekranda ayrıntılı bilgileri daha küçük bir yazı tipi ile göster.",//Detailed Information
|
||||
/* Display rotation mode */"Görüntü Yönlendirme <A. Otomatik L. Solak R. Sağlak>",//Orientation
|
||||
/* Boost enabled */"Lehimleme yaparken ön tuşa basmak Boost moduna sokar(450C)",//Boost enable
|
||||
/* Boost temperature */"\"boost\" Modu Derecesi",//Boost Temp
|
||||
/* Automatic start mode */"Güç verildiğinde otomatik olarak lehimleme modunda başlat. T=Lehimleme Modu, S= Uyku Modu,F=Kapalı",//Auto start
|
||||
/* Cooldown blink */"Soğutma ekranında uç hala sıcakken derece yanıp sönsün.",//Cooling Blink
|
||||
/* Temperature calibration enter menu */"Ucu kalibre et.",//Calibrate Tip
|
||||
/* Settings reset command */"Bütün ayarları sıfırla",//Reset Settings
|
||||
/* Calibrate input voltage */"VIN Kalibrasyonu. Düğmeler ayarlar, çıkmak için uzun bas.",//VIN Cal
|
||||
/* Advanced soldering screen enabled */"Lehimleme yaparken detaylı bilgi göster",//ADV SLD
|
||||
};
|
||||
|
||||
const char* SettingsCalibrationWarning = "Lütfen devam etmeden önce ucun oda sıcaklığında olduğunu garantiye alın!";
|
||||
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
|
||||
const char* SleepingSimpleString = "Zzzz"; // Must be <= 4 chars
|
||||
const char* SleepingAdvancedString = "Uyuyor..."; // <=17 chars
|
||||
const char* WarningSimpleString = "HOT!"; //Must be <= 4 chars
|
||||
const char* SleepingSimpleString = "Zzzz";// Must be <= 4 chars
|
||||
const char* SleepingAdvancedString = "Uyuyor...";// <=17 chars
|
||||
const char* WarningSimpleString = "HOT!";//Must be <= 4 chars
|
||||
const char* WarningAdvancedString = "UYARI! UÇ SICAK!";
|
||||
|
||||
const char SettingTrueChar = 'T';
|
||||
@@ -464,22 +756,25 @@ const char SettingFalseChar = 'F';
|
||||
const char SettingRightChar = 'R';
|
||||
const char SettingLeftChar = 'L';
|
||||
const char SettingAutoChar = 'A';
|
||||
|
||||
const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
|
||||
const char* SettingsShortNames[16][2] = {
|
||||
/* (<= 5) Power source (DC or batt) */{"PWRSC"},
|
||||
/* (<= 4) Sleep temperature */{"STMP"},
|
||||
/* (<= 4) Sleep timeout */{"STME"},
|
||||
/* (<= 5) Shutdown timeout */{"SHTME"},
|
||||
/* (<= 6) Motion sensitivity level */{"MSENSE"},
|
||||
/* (<= 6) Temperature in F and C */{"TMPUNT"},
|
||||
/* (<= 6) Advanced idle display mode enabled */{"ADVIDL"},
|
||||
/* (<= 6) Display rotation mode */{"DSPROT"},
|
||||
/* (<= 6) Boost enabled */{"BOOST"},
|
||||
/* (<= 4) Boost temperature */{"BTMP"},
|
||||
/* (<= 6) Automatic start mode */{"ASTART"},
|
||||
/* (<= 6) Cooldown blink */{"CLBLNK"},
|
||||
/* (<= 8) Temperature calibration enter menu */{"TMP CAL?"},
|
||||
/* (<= 8) Settings reset command */{"RESET?"},
|
||||
/* (<= 8) Calibrate input voltage */{"CAL VIN?"},
|
||||
/* (<= 6) Advanced soldering screen enabled */{"ADVSLD"},
|
||||
};
|
||||
#endif
|
||||
//Currently the settings names are not translated
|
||||
const char* SettingsShortNames[16] = { /**/
|
||||
"PWRSC ", // Power Source (DC or batt)
|
||||
"STMP ", // Sleep Temperature
|
||||
"STME ", // Sleep Timeout
|
||||
"SHTME ", // Shutdown Temperature
|
||||
"MSENSE ", // Motion sensitivity level
|
||||
"TMPUNT ", //Temp in F and C
|
||||
"ADVIDL ", // Advanced idle display mode enable
|
||||
"DSPROT ", // Display rotation mode
|
||||
"BOOST ", // Boost enabled
|
||||
"BTMP ", // Boost temperature
|
||||
"ASTART ", // Automatic Start mode
|
||||
"CLBLNK ", // Cooldown blink
|
||||
"TMP CAL?", // Temperature calibration enter menu
|
||||
"RESET? ", // Settings reset command
|
||||
"CAL VIN?", "ADVSLD ", //advanced soldering screens
|
||||
};
|
||||
|
||||
|
||||
@@ -64,95 +64,159 @@ const menuitem settingsMenu[] = { /*Struct used for all settings options in the
|
||||
{ NULL, { NULL }, { NULL } } //end of menu marker. DO NOT REMOVE
|
||||
};
|
||||
|
||||
|
||||
static void printShortDescriptionSingleLine(uint32_t shortDescIndex) {
|
||||
lcd.setFont(0);
|
||||
lcd.setCharCursor(0, 0);
|
||||
lcd.print(SettingsShortNames[shortDescIndex][0]);
|
||||
}
|
||||
|
||||
static void printShortDescriptionDoubleLine(uint32_t shortDescIndex) {
|
||||
lcd.setFont(1);
|
||||
lcd.setCharCursor(0, 0);
|
||||
lcd.print(SettingsShortNames[shortDescIndex][0]);
|
||||
lcd.setCharCursor(0, 1);
|
||||
lcd.print(SettingsShortNames[shortDescIndex][1]);
|
||||
}
|
||||
|
||||
/**
|
||||
* Prints two small lines of short description
|
||||
* and prepares cursor in big font after it.
|
||||
* @param shortDescIndex Index to of short description.
|
||||
* @param cursorCharPosition Custom cursor char position to set after printing description.
|
||||
*/
|
||||
static void printShortDescription(uint32_t shortDescIndex, uint16_t cursorCharPosition) {
|
||||
//print short description (default single line, explicit double line)
|
||||
if(SettingsShortNameType == SHORT_NAME_DOUBLE_LINE) {
|
||||
printShortDescriptionDoubleLine(shortDescIndex);
|
||||
}
|
||||
else {
|
||||
printShortDescriptionSingleLine(shortDescIndex);
|
||||
}
|
||||
|
||||
//prepare cursor for value
|
||||
lcd.setFont(0);
|
||||
lcd.setCharCursor(cursorCharPosition, 0);
|
||||
}
|
||||
|
||||
|
||||
static void settings_setInputVRange(void) {
|
||||
systemSettings.cutoutSetting = (systemSettings.cutoutSetting + 1) % 5;
|
||||
}
|
||||
|
||||
static void settings_displayInputVRange(void) {
|
||||
lcd.print(SettingsShortNames[0]);
|
||||
if (systemSettings.cutoutSetting) {
|
||||
lcd.drawChar('0' + 2 + systemSettings.cutoutSetting);
|
||||
lcd.drawChar('S');
|
||||
} else {
|
||||
lcd.print("DC");
|
||||
}
|
||||
printShortDescription(0, 6);
|
||||
|
||||
if (systemSettings.cutoutSetting) {
|
||||
lcd.drawChar('0' + 2 + systemSettings.cutoutSetting);
|
||||
lcd.drawChar('S');
|
||||
}
|
||||
else {
|
||||
lcd.print("DC");
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
static void settings_setSleepTemp(void) {
|
||||
systemSettings.SleepTemp += 10;
|
||||
if (systemSettings.SleepTemp > 300)
|
||||
systemSettings.SleepTemp = 50;
|
||||
}
|
||||
|
||||
static void settings_displaySleepTemp(void) {
|
||||
lcd.print(SettingsShortNames[1]);
|
||||
printShortDescription(1, 5);
|
||||
lcd.printNumber(systemSettings.SleepTemp, 3);
|
||||
}
|
||||
|
||||
|
||||
static void settings_setSleepTime(void) {
|
||||
++systemSettings.SleepTime; //Go up 1 minute at a time
|
||||
if (systemSettings.SleepTime >= 16)
|
||||
systemSettings.SleepTime = 1; //can't set time over 10 mins
|
||||
//Remember that ^ is the time of no movement
|
||||
systemSettings.SleepTime++; //Go up 1 minute at a time
|
||||
if (systemSettings.SleepTime >= 16) {
|
||||
systemSettings.SleepTime = 1; //can't set time over 10 mins
|
||||
}
|
||||
//Remember that ^ is the time of no movement
|
||||
}
|
||||
|
||||
static void settings_displaySleepTime(void) {
|
||||
lcd.print(SettingsShortNames[2]);
|
||||
if (systemSettings.SleepTime < 6) {
|
||||
printShortDescription(2, 5);
|
||||
|
||||
if (systemSettings.SleepTime < 6) {
|
||||
lcd.printNumber(systemSettings.SleepTime * 10, 2);
|
||||
lcd.drawChar('S');
|
||||
} else {
|
||||
}
|
||||
else {
|
||||
lcd.printNumber(systemSettings.SleepTime - 5, 2);
|
||||
lcd.drawChar('M');
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
static void settings_setShutdownTime(void) {
|
||||
++systemSettings.ShutdownTime;
|
||||
if (systemSettings.ShutdownTime > 60)
|
||||
systemSettings.ShutdownTime = 0; //wrap to off
|
||||
systemSettings.ShutdownTime++;
|
||||
if (systemSettings.ShutdownTime > 60) {
|
||||
systemSettings.ShutdownTime = 0; //wrap to off
|
||||
}
|
||||
}
|
||||
|
||||
static void settings_displayShutdownTime(void) {
|
||||
lcd.print(SettingsShortNames[3]);
|
||||
printShortDescription(3, 6);
|
||||
lcd.printNumber(systemSettings.ShutdownTime, 2);
|
||||
}
|
||||
|
||||
|
||||
static void settings_setTempF(void) {
|
||||
systemSettings.temperatureInF = !systemSettings.temperatureInF;
|
||||
}
|
||||
static void settings_displayTempF(void) {
|
||||
lcd.print(SettingsShortNames[5]);
|
||||
|
||||
if (systemSettings.temperatureInF)
|
||||
lcd.drawChar('F');
|
||||
else
|
||||
lcd.drawChar('C');
|
||||
static void settings_displayTempF(void) {
|
||||
printShortDescription(5, 7);
|
||||
|
||||
lcd.drawChar(
|
||||
(systemSettings.temperatureInF)
|
||||
? 'F'
|
||||
: 'C'
|
||||
);
|
||||
}
|
||||
|
||||
|
||||
static void settings_setSensitivity(void) {
|
||||
systemSettings.sensitivity++;
|
||||
systemSettings.sensitivity = systemSettings.sensitivity % 10;
|
||||
}
|
||||
|
||||
static void settings_displaySensitivity(void) {
|
||||
lcd.print(SettingsShortNames[4]);
|
||||
printShortDescription(4, 7);
|
||||
lcd.printNumber(systemSettings.sensitivity, 1);
|
||||
}
|
||||
|
||||
|
||||
static void settings_setAdvancedSolderingScreens(void) {
|
||||
systemSettings.detailedSoldering = !systemSettings.detailedSoldering;
|
||||
}
|
||||
|
||||
static void settings_displayAdvancedSolderingScreens(void) {
|
||||
lcd.print(SettingsShortNames[15]);
|
||||
if (systemSettings.detailedSoldering)
|
||||
lcd.drawChar(SettingTrueChar);
|
||||
else
|
||||
lcd.drawChar(SettingFalseChar);
|
||||
printShortDescription(15, 7);
|
||||
|
||||
lcd.drawChar(
|
||||
(systemSettings.detailedSoldering)
|
||||
? SettingTrueChar
|
||||
: SettingFalseChar
|
||||
);
|
||||
}
|
||||
|
||||
|
||||
static void settings_setAdvancedIDLEScreens(void) {
|
||||
systemSettings.detailedIDLE = !systemSettings.detailedIDLE;
|
||||
}
|
||||
|
||||
static void settings_displayAdvancedIDLEScreens(void) {
|
||||
lcd.print(SettingsShortNames[6]);
|
||||
if (systemSettings.detailedIDLE)
|
||||
lcd.drawChar(SettingTrueChar);
|
||||
else
|
||||
lcd.drawChar(SettingFalseChar);
|
||||
printShortDescription(6, 7);
|
||||
|
||||
lcd.drawChar(
|
||||
(systemSettings.detailedIDLE)
|
||||
? SettingTrueChar
|
||||
: SettingFalseChar
|
||||
);
|
||||
}
|
||||
|
||||
|
||||
@@ -160,9 +224,11 @@ static void settings_setDisplayRotation(void) {
|
||||
systemSettings.OrientationMode++;
|
||||
systemSettings.OrientationMode = systemSettings.OrientationMode % 3;
|
||||
}
|
||||
|
||||
static void settings_displayDisplayRotation(void) {
|
||||
lcd.print(SettingsShortNames[7]);
|
||||
switch (systemSettings.OrientationMode) {
|
||||
printShortDescription(7, 7);
|
||||
|
||||
switch (systemSettings.OrientationMode) {
|
||||
case 0:
|
||||
lcd.drawChar(SettingRightChar);
|
||||
break;
|
||||
@@ -173,66 +239,87 @@ static void settings_displayDisplayRotation(void) {
|
||||
lcd.drawChar(SettingAutoChar);
|
||||
break;
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
|
||||
static void settings_setBoostModeEnabled(void) {
|
||||
systemSettings.boostModeEnabled = !systemSettings.boostModeEnabled;
|
||||
}
|
||||
|
||||
static void settings_displayBoostModeEnabled(void) {
|
||||
lcd.print(SettingsShortNames[8]);
|
||||
if (systemSettings.boostModeEnabled)
|
||||
lcd.drawChar(SettingTrueChar);
|
||||
else
|
||||
lcd.drawChar(SettingFalseChar);
|
||||
printShortDescription(8, 7);
|
||||
|
||||
lcd.drawChar(
|
||||
(systemSettings.boostModeEnabled)
|
||||
? SettingTrueChar
|
||||
: SettingFalseChar
|
||||
);
|
||||
}
|
||||
|
||||
|
||||
static void settings_setBoostTemp(void) {
|
||||
systemSettings.BoostTemp += 10; //Go up 10 at a time
|
||||
systemSettings.BoostTemp += 10; //Go up 10 at a time
|
||||
if (systemSettings.temperatureInF) {
|
||||
if (systemSettings.BoostTemp > 850)
|
||||
systemSettings.BoostTemp = 480; //loop back at 250
|
||||
} else {
|
||||
if (systemSettings.BoostTemp > 450)
|
||||
systemSettings.BoostTemp = 250; //loop back at 250
|
||||
if (systemSettings.BoostTemp > 850) {
|
||||
systemSettings.BoostTemp = 480; //loop back at 250
|
||||
}
|
||||
}
|
||||
else {
|
||||
if (systemSettings.BoostTemp > 450) {
|
||||
systemSettings.BoostTemp = 250; //loop back at 250
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
static void settings_displayBoostTemp(void) {
|
||||
lcd.print(SettingsShortNames[9]);
|
||||
printShortDescription(9, 5);
|
||||
lcd.printNumber(systemSettings.BoostTemp, 3);
|
||||
}
|
||||
|
||||
|
||||
static void settings_setAutomaticStartMode(void) {
|
||||
systemSettings.autoStartMode++;
|
||||
systemSettings.autoStartMode %= 2;
|
||||
}
|
||||
|
||||
static void settings_displayAutomaticStartMode(void) {
|
||||
lcd.print(SettingsShortNames[10]);
|
||||
switch (systemSettings.autoStartMode) {
|
||||
case 0:
|
||||
lcd.drawChar(SettingFalseChar);
|
||||
break;
|
||||
case 1:
|
||||
lcd.drawChar(SettingTrueChar);
|
||||
break;
|
||||
}
|
||||
printShortDescription(10, 7);
|
||||
|
||||
lcd.drawChar(
|
||||
(systemSettings.autoStartMode)
|
||||
? SettingTrueChar
|
||||
: SettingFalseChar
|
||||
);
|
||||
}
|
||||
|
||||
|
||||
static void settings_setCoolingBlinkEnabled(void) {
|
||||
systemSettings.coolingTempBlink = !systemSettings.coolingTempBlink;
|
||||
}
|
||||
|
||||
static void settings_displayCoolingBlinkEnabled(void) {
|
||||
lcd.print(SettingsShortNames[11]);
|
||||
if (systemSettings.coolingTempBlink)
|
||||
lcd.drawChar(SettingTrueChar);
|
||||
else
|
||||
lcd.drawChar(SettingFalseChar);
|
||||
printShortDescription(11, 7);
|
||||
|
||||
lcd.drawChar(
|
||||
(systemSettings.coolingTempBlink)
|
||||
? SettingTrueChar
|
||||
: SettingFalseChar
|
||||
);
|
||||
}
|
||||
|
||||
|
||||
static void settings_setResetSettings(void) {
|
||||
settingsResetRequest = !settingsResetRequest;
|
||||
}
|
||||
|
||||
static void settings_displayResetSettings(void) {
|
||||
lcd.print(SettingsShortNames[13]);
|
||||
if (settingsResetRequest)
|
||||
lcd.drawChar(SettingTrueChar);
|
||||
else
|
||||
lcd.drawChar(SettingFalseChar);
|
||||
printShortDescription(13, 7);
|
||||
|
||||
lcd.drawChar(
|
||||
(settingsResetRequest)
|
||||
? SettingTrueChar
|
||||
: SettingFalseChar
|
||||
);
|
||||
}
|
||||
|
||||
static void settings_setCalibrate(void) {
|
||||
@@ -240,16 +327,18 @@ static void settings_setCalibrate(void) {
|
||||
//We split off here to confirm with the user
|
||||
uint8_t maxOffset = strlen(SettingsCalibrationWarning) + 5;
|
||||
uint32_t descriptionStart = HAL_GetTick();
|
||||
|
||||
lcd.setFont(0);
|
||||
lcd.clearScreen();
|
||||
lcd.setCursor(0, 0);
|
||||
for (;;) {
|
||||
|
||||
for (;;) {
|
||||
int16_t descriptionOffset = (((HAL_GetTick() - descriptionStart) / 150) % maxOffset);
|
||||
|
||||
lcd.setCursor(12 * (7 - descriptionOffset), 0);
|
||||
lcd.print(SettingsCalibrationWarning);
|
||||
ButtonState buttons = getButtonState();
|
||||
|
||||
ButtonState buttons = getButtonState();
|
||||
switch (buttons) {
|
||||
case BUTTON_F_SHORT: {
|
||||
//User confirmed
|
||||
@@ -258,12 +347,14 @@ static void settings_setCalibrate(void) {
|
||||
lcd.setCursor(0, 0);
|
||||
lcd.print(".....");
|
||||
lcd.refresh();
|
||||
setCalibrationOffset(0); //turn off the current offset
|
||||
|
||||
setCalibrationOffset(0); //turn off the current offset
|
||||
for (uint8_t i = 0; i < 20; i++) {
|
||||
getTipRawTemp(1); //cycle through the filter a fair bit to ensure were stable.
|
||||
getTipRawTemp(1); //cycle through the filter a fair bit to ensure we're stable.
|
||||
osDelay(20);
|
||||
}
|
||||
osDelay(100);
|
||||
|
||||
uint16_t rawTempC = tipMeasurementToC(getTipRawTemp(0));
|
||||
//We now measure the current reported tip temperature
|
||||
uint16_t handleTempC = getHandleTemperature() / 10;
|
||||
@@ -274,30 +365,33 @@ static void settings_setCalibrate(void) {
|
||||
osDelay(100);
|
||||
return;
|
||||
}
|
||||
break;
|
||||
|
||||
case BUTTON_BOTH:
|
||||
case BUTTON_B_SHORT:
|
||||
case BUTTON_F_LONG:
|
||||
case BUTTON_B_LONG:
|
||||
return;
|
||||
break;
|
||||
|
||||
case BUTTON_NONE:
|
||||
break;
|
||||
}
|
||||
|
||||
lcd.refresh();
|
||||
osDelay(50);
|
||||
}
|
||||
}
|
||||
|
||||
}
|
||||
static void settings_displayCalibrate(void) {
|
||||
lcd.print(SettingsShortNames[12]);
|
||||
printShortDescription(12, 5);
|
||||
}
|
||||
|
||||
|
||||
static void settings_setCalibrateVIN(void) {
|
||||
//Jump to the voltage calibration subscreen
|
||||
//Jump to the voltage calibration subscreen
|
||||
lcd.setFont(0);
|
||||
lcd.clearScreen();
|
||||
lcd.setCursor(0, 0);
|
||||
|
||||
for (;;) {
|
||||
lcd.setCursor(0, 0);
|
||||
lcd.printNumber(getInputVoltageX10(systemSettings.voltageDiv) / 10, 2);
|
||||
@@ -310,30 +404,34 @@ static void settings_setCalibrateVIN(void) {
|
||||
case BUTTON_F_SHORT:
|
||||
systemSettings.voltageDiv++;
|
||||
break;
|
||||
|
||||
case BUTTON_B_SHORT:
|
||||
systemSettings.voltageDiv--;
|
||||
break;
|
||||
|
||||
case BUTTON_BOTH:
|
||||
case BUTTON_F_LONG:
|
||||
case BUTTON_B_LONG:
|
||||
saveSettings();
|
||||
return;
|
||||
break;
|
||||
|
||||
case BUTTON_NONE:
|
||||
break;
|
||||
}
|
||||
|
||||
lcd.refresh();
|
||||
osDelay(50);
|
||||
if (systemSettings.voltageDiv < 90)
|
||||
systemSettings.voltageDiv = 90;
|
||||
else if (systemSettings.voltageDiv > 130)
|
||||
systemSettings.voltageDiv = 130;
|
||||
|
||||
//Cap to sensible values
|
||||
if (systemSettings.voltageDiv < 90) {
|
||||
systemSettings.voltageDiv = 90;
|
||||
}
|
||||
else if (systemSettings.voltageDiv > 130) {
|
||||
systemSettings.voltageDiv = 130;
|
||||
}
|
||||
}
|
||||
}
|
||||
static void settings_displayCalibrateVIN(void) {
|
||||
lcd.clearScreen();
|
||||
lcd.setCursor(0, 0);
|
||||
lcd.print(SettingsShortNames[14]);
|
||||
|
||||
static void settings_displayCalibrateVIN(void) {
|
||||
printShortDescription(14, 5);
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user