diff --git a/workspace/TS100/Core/BSP/Miniware/Pins.h b/workspace/TS100/Core/BSP/Miniware/Pins.h
index ff6586b6..e932d9eb 100644
--- a/workspace/TS100/Core/BSP/Miniware/Pins.h
+++ b/workspace/TS100/Core/BSP/Miniware/Pins.h
@@ -8,9 +8,9 @@
 #ifndef BSP_MINIWARE_PINS_H_
 #define BSP_MINIWARE_PINS_H_
 
-#if defined(MODEL_TS100) + defined(MODEL_TS80) > 1
+#if defined(MODEL_TS100) + defined(MODEL_TS80)+defined(MODEL_TS80P) > 1
 #error "Multiple models defined!"
-#elif defined(MODEL_TS100) + defined(MODEL_TS80) == 0
+#elif defined(MODEL_TS100) + defined(MODEL_TS80)+ defined(MODEL_TS80P) == 0
 #error "No model defined!"
 #endif
 
@@ -45,8 +45,8 @@
 #define SCL_GPIO_Port GPIOB
 #define SDA_Pin GPIO_PIN_7
 #define SDA_GPIO_Port GPIOB
-
-#else
+#endif
+#ifdef MODEL_TS80
 // TS80 pin map
 #define KEY_B_Pin GPIO_PIN_0
 #define KEY_B_GPIO_Port GPIOB
@@ -84,6 +84,45 @@
 #define INT_PD_Pin GPIO_PIN_9
 #define INT_PD_GPIO_Port GPIOA
 
+#endif
+#ifdef MODEL_TS80P
+// TS80P pin map
+#define KEY_B_Pin GPIO_PIN_0
+#define KEY_B_GPIO_Port GPIOB
+#define TMP36_INPUT_Pin GPIO_PIN_4
+#define TMP36_INPUT_GPIO_Port GPIOA
+#define TMP36_ADC1_CHANNEL ADC_CHANNEL_4
+#define TIP_TEMP_Pin GPIO_PIN_3
+#define TIP_TEMP_GPIO_Port GPIOA
+#define TIP_TEMP_ADC1_CHANNEL ADC_CHANNEL_3
+#define TIP_TEMP_ADC2_CHANNEL ADC_CHANNEL_3
+
+#define VIN_Pin GPIO_PIN_2
+#define VIN_GPIO_Port GPIOA
+#define VIN_ADC1_CHANNEL ADC_CHANNEL_2
+#define VIN_ADC2_CHANNEL ADC_CHANNEL_2
+#define OLED_RESET_Pin GPIO_PIN_15
+#define OLED_RESET_GPIO_Port GPIOA
+#define KEY_A_Pin GPIO_PIN_1
+#define KEY_A_GPIO_Port GPIOB
+#define INT_Orientation_Pin GPIO_PIN_4
+#define INT_Orientation_GPIO_Port GPIOB
+#define PWM_Out_Pin GPIO_PIN_6
+#define PWM_Out_GPIO_Port GPIOA
+#define PWM_Out_CHANNEL TIM_CHANNEL_1
+#define INT_Movement_Pin GPIO_PIN_5
+#define INT_Movement_GPIO_Port GPIOB
+#define SCL_Pin GPIO_PIN_6
+#define SCL_GPIO_Port GPIOB
+#define SDA_Pin GPIO_PIN_7
+#define SDA_GPIO_Port GPIOB
+#define SCL2_Pin GPIO_PIN_5
+#define SCL2_GPIO_Port GPIOA
+#define SDA2_Pin GPIO_PIN_1
+#define SDA2_GPIO_Port GPIOA
+#define INT_PD_Pin GPIO_PIN_9
+#define INT_PD_GPIO_Port GPIOA
+
 #endif
 
 #endif /* BSP_MINIWARE_PINS_H_ */
diff --git a/workspace/TS100/Core/BSP/Miniware/Power.cpp b/workspace/TS100/Core/BSP/Miniware/Power.cpp
index 4421151e..3faeedb5 100644
--- a/workspace/TS100/Core/BSP/Miniware/Power.cpp
+++ b/workspace/TS100/Core/BSP/Miniware/Power.cpp
@@ -8,10 +8,9 @@ bool FUSB302_present = false;
 void power_probe() {
 // If TS80 probe for QC
 // If TS100 - noop
-#ifdef MODEL_TS80
+#ifdef defined(MODEL_TS80)+defined(MODEL_TS80P)>0
 
 	startQC(systemSettings.voltageDiv);
-
 	seekQC((systemSettings.cutoutSetting) ? 120 : 90,
 			systemSettings.voltageDiv); // this will move the QC output to the preferred voltage to start with
 
@@ -19,12 +18,12 @@ void power_probe() {
 }
 
 void power_check() {
-#ifdef MODEL_TS80
+#ifdef defined(MODEL_TS80)+defined(MODEL_TS80P)>0
 	QC_resync();
 #endif
 }
 uint8_t usb_pd_detect() {
-#ifdef MODEL_TS80
+#ifdef MODEL_TS80P
 	FUSB302_present = fusb302_detect();
 	if (FUSB302_present) {
 		GPIO_InitTypeDef GPIO_InitStruct;
@@ -39,9 +38,11 @@ uint8_t usb_pd_detect() {
 	return false;
 }
 uint8_t pd_irq_read() {
-#ifdef MODEL_TS80
-	return HAL_GPIO_ReadPin(INT_PD_GPIO_Port, INT_PD_Pin) == GPIO_PIN_SET ?
-			1 : 0;
+#ifdef MODEL_TS80P
+	if (FUSB302_present) {
+		return HAL_GPIO_ReadPin(INT_PD_GPIO_Port, INT_PD_Pin) == GPIO_PIN_SET ?
+				1 : 0;
+	}
 #endif
 	return 0;
 }
diff --git a/workspace/TS100/Core/BSP/Miniware/QC_GPIO.cpp b/workspace/TS100/Core/BSP/Miniware/QC_GPIO.cpp
index bd3841c3..5d5f3b10 100644
--- a/workspace/TS100/Core/BSP/Miniware/QC_GPIO.cpp
+++ b/workspace/TS100/Core/BSP/Miniware/QC_GPIO.cpp
@@ -67,8 +67,8 @@ void QC_Post_Probe_En() {
 uint8_t QC_DM_PulledDown() { return HAL_GPIO_ReadPin(GPIOA, GPIO_PIN_11) == GPIO_PIN_RESET ? 1 : 0; }
 
 void QC_resync() {
-#ifdef MODEL_TS80
+#if defined(MODEL_TS80) + defined(MODEL_TS80P) >0
     seekQC((systemSettings.cutoutSetting) ? 120 : 90,
            systemSettings.voltageDiv);  // Run the QC seek again if we have drifted too much
 #endif
-}
\ No newline at end of file
+}
diff --git a/workspace/TS100/Core/BSP/Miniware/UnitSettings.h b/workspace/TS100/Core/BSP/Miniware/UnitSettings.h
index f3588b8b..46a1b78c 100644
--- a/workspace/TS100/Core/BSP/Miniware/UnitSettings.h
+++ b/workspace/TS100/Core/BSP/Miniware/UnitSettings.h
@@ -8,7 +8,7 @@
 #ifndef BSP_MINIWARE_UNITSETTINGS_H_
 #define BSP_MINIWARE_UNITSETTINGS_H_
 //On the TS80, the LIS accel is mounted backwards
-#ifdef MODEL_TS80
+#if defined(MODEL_TS80)+defined(MODEL_TS80P)>0
 #define LIS_ORI_FLIP
 #endif
 
diff --git a/workspace/TS100/Core/BSP/Miniware/preRTOS.cpp b/workspace/TS100/Core/BSP/Miniware/preRTOS.cpp
index 2e81642a..f342f8a7 100644
--- a/workspace/TS100/Core/BSP/Miniware/preRTOS.cpp
+++ b/workspace/TS100/Core/BSP/Miniware/preRTOS.cpp
@@ -20,7 +20,7 @@ void preRToSInit() {
 	HAL_Delay(50);
 	HAL_GPIO_WritePin(OLED_RESET_GPIO_Port, OLED_RESET_Pin, GPIO_PIN_SET);
 	HAL_Delay(50);
-#ifdef MODEL_TS80
+#ifdef MODEL_TS80P
 	I2CBB::init();
 	//Spawn all of the USB-C processors
 	fusb302_start_processing();
diff --git a/workspace/TS100/Core/Drivers/FUSB302/fusb302b.cpp b/workspace/TS100/Core/Drivers/FUSB302/fusb302b.cpp
index 6e57b9fc..df6e105f 100644
--- a/workspace/TS100/Core/Drivers/FUSB302/fusb302b.cpp
+++ b/workspace/TS100/Core/Drivers/FUSB302/fusb302b.cpp
@@ -42,7 +42,9 @@ static uint8_t fusb_read_byte(uint8_t addr) {
  * buf: The buffer into which data will be read
  */
 static void fusb_read_buf(uint8_t addr, uint8_t size, uint8_t *buf) {
-	I2CBB::Mem_Read(FUSB302B_ADDR, addr, (uint8_t*) buf, size);
+	if(!I2CBB::Mem_Read(FUSB302B_ADDR, addr, (uint8_t*) buf, size)){
+		asm("bkpt");
+	}
 
 }
 
@@ -54,7 +56,9 @@ static void fusb_read_buf(uint8_t addr, uint8_t size, uint8_t *buf) {
  * byte: The value to write
  */
 static void fusb_write_byte(uint8_t addr, uint8_t byte) {
-	I2CBB::Mem_Write(FUSB302B_ADDR, addr, (uint8_t*) &byte, 1);
+	if(!I2CBB::Mem_Write(FUSB302B_ADDR, addr, (uint8_t*) &byte, 1)){
+		asm("bkpt");
+	}
 
 }
 
@@ -67,7 +71,9 @@ static void fusb_write_byte(uint8_t addr, uint8_t byte) {
  * buf: The buffer to write
  */
 static void fusb_write_buf(uint8_t addr, uint8_t size, const uint8_t *buf) {
-	I2CBB::Mem_Write(FUSB302B_ADDR, addr, (uint8_t*) &buf, size);
+	if(!I2CBB::Mem_Write(FUSB302B_ADDR, addr, (uint8_t*) &buf, size)){
+		asm("bkpt");
+	}
 
 }
 
diff --git a/workspace/TS100/Core/Drivers/FUSB302/fusbpd.cpp b/workspace/TS100/Core/Drivers/FUSB302/fusbpd.cpp
index 00b84e96..f6afe163 100644
--- a/workspace/TS100/Core/Drivers/FUSB302/fusbpd.cpp
+++ b/workspace/TS100/Core/Drivers/FUSB302/fusbpd.cpp
@@ -21,7 +21,7 @@ uint8_t fusb302_detect() {
 }
 
 void fusb302_start_processing() {
-
+	HAL_Delay(30);
 	/* Initialize the FUSB302B */
 	fusb_setup();
 
diff --git a/workspace/TS100/Core/Drivers/FUSB302/hard_reset.cpp b/workspace/TS100/Core/Drivers/FUSB302/hard_reset.cpp
index 648a7f4e..0f81f646 100644
--- a/workspace/TS100/Core/Drivers/FUSB302/hard_reset.cpp
+++ b/workspace/TS100/Core/Drivers/FUSB302/hard_reset.cpp
@@ -103,7 +103,7 @@ void ResetHandler::init() {
 
 void ResetHandler::notify(uint32_t notification) {
 	xTaskNotify(TaskHandle, notification,
-			eNotifyAction::eSetValueWithOverwrite);
+			eNotifyAction::eSetBits);
 }
 
 void ResetHandler::Thread(const void *arg) {
diff --git a/workspace/TS100/Core/Drivers/FUSB302/pd.h b/workspace/TS100/Core/Drivers/FUSB302/pd.h
index c6b94c6c..e94e9cbe 100644
--- a/workspace/TS100/Core/Drivers/FUSB302/pd.h
+++ b/workspace/TS100/Core/Drivers/FUSB302/pd.h
@@ -278,15 +278,13 @@
 #define PD_T_PS_TRANSITION (500)
 #define PD_T_SENDER_RESPONSE (27)
 #define PD_T_SINK_REQUEST (100)
-#define PD_T_TYPEC_SINK_WAIT_CAP (465)
-#define PD_T_PPS_REQUEST TIME_S2I(10)
-/* This is actually from Type-C, not Power Delivery, but who cares? */
+#define PD_T_TYPEC_SINK_WAIT_CAP (465+100)
 #define PD_T_PD_DEBOUNCE (15)
 
 /*
  * Counter maximums
  */
-#define PD_N_HARD_RESET_COUNT 2
+#define PD_N_HARD_RESET_COUNT 10
 
 /*
  * Value parameters
diff --git a/workspace/TS100/Core/Drivers/FUSB302/pdb_conf.h b/workspace/TS100/Core/Drivers/FUSB302/pdb_conf.h
index ef733c3d..c2ca0f3f 100644
--- a/workspace/TS100/Core/Drivers/FUSB302/pdb_conf.h
+++ b/workspace/TS100/Core/Drivers/FUSB302/pdb_conf.h
@@ -22,21 +22,6 @@
 /* Number of messages in the message pool */
 #define PDB_MSG_POOL_SIZE 4
 
-/* Size of the Policy Engine thread's working area */
-#define PDB_PE_WA_SIZE 256
-
-/* Size of the protocol layer RX thread's working area */
-#define PDB_PRLRX_WA_SIZE 256
-
-/* Size of the protocol layer TX thread's working area */
-#define PDB_PRLTX_WA_SIZE 256
-
-/* Size of the protocol layer hard reset thread's working area */
-#define PDB_HARDRST_WA_SIZE 256
-
-/* Size of the INT_N thread's working area */
-#define PDB_INT_N_WA_SIZE 128
-
 #define EVENT_MASK(x) (1<<x)
 #define eventmask_t uint32_t
 /* PD Buddy thread priorities */
diff --git a/workspace/TS100/Core/Drivers/FUSB302/policy_engine.cpp b/workspace/TS100/Core/Drivers/FUSB302/policy_engine.cpp
index fa076ba7..1a0b9e23 100644
--- a/workspace/TS100/Core/Drivers/FUSB302/policy_engine.cpp
+++ b/workspace/TS100/Core/Drivers/FUSB302/policy_engine.cpp
@@ -55,7 +55,7 @@ void PolicyEngine::init() {
 
 void PolicyEngine::notify(uint32_t notification) {
 	xTaskNotify(TaskHandle, notification,
-			eNotifyAction::eSetValueWithOverwrite);
+			eNotifyAction::eSetBits);
 }
 
 void PolicyEngine::pe_task(const void *arg) {
diff --git a/workspace/TS100/Core/Drivers/FUSB302/policy_engine_user.cpp b/workspace/TS100/Core/Drivers/FUSB302/policy_engine_user.cpp
index 72364ae3..2099d210 100644
--- a/workspace/TS100/Core/Drivers/FUSB302/policy_engine_user.cpp
+++ b/workspace/TS100/Core/Drivers/FUSB302/policy_engine_user.cpp
@@ -81,6 +81,7 @@ bool PolicyEngine::pdbs_dpm_evaluate_capability(
 				return true;
 			}
 		}
+#if 0
 		/* If we have a PPS APDO, our desired V lies within its range, and
 		 * its I is at least our desired I */
 		if ((capabilities->obj[i] & PD_PDO_TYPE) == PD_PDO_TYPE_AUGMENTED
@@ -108,6 +109,7 @@ bool PolicyEngine::pdbs_dpm_evaluate_capability(
 //
 //			return true;
 		}
+#endif
 	}
 	/* If there's a PDO in the voltage range, use it */
 //	int8_t i = dpm_get_range_fixed_pdo_index(caps, scfg);
diff --git a/workspace/TS100/Core/Drivers/FUSB302/protocol_rx.cpp b/workspace/TS100/Core/Drivers/FUSB302/protocol_rx.cpp
index a3ebb2b2..14573aca 100644
--- a/workspace/TS100/Core/Drivers/FUSB302/protocol_rx.cpp
+++ b/workspace/TS100/Core/Drivers/FUSB302/protocol_rx.cpp
@@ -34,10 +34,12 @@ uint8_t ProtocolReceive::_tx_messageidcounter;
  */
 ProtocolReceive::protocol_rx_state ProtocolReceive::protocol_rx_wait_phy() {
 	/* Wait for an event */
+	_rx_messageid = 0;
 	eventmask_t evt = waitForEvent(0xFFFFFFFF);
 
 	/* If we got a reset event, reset */
 	if (evt & PDB_EVT_PRLRX_RESET) {
+		waitForEvent(PDB_EVT_PRLRX_RESET, 0);
 		return PRLRxWaitPHY;
 	}
 	/* If we got an I_GCRCSENT event, read the message and decide what to do */
@@ -75,7 +77,7 @@ ProtocolReceive::protocol_rx_state ProtocolReceive::protocol_rx_reset() {
 	taskYIELD();
 
 	/* If we got a RESET signal, reset the machine */
-	if (waitForEvent(PDB_EVT_PRLRX_RESET) != 0) {
+	if (waitForEvent(PDB_EVT_PRLRX_RESET, 0) != 0) {
 		return PRLRxWaitPHY;
 	}
 
@@ -88,17 +90,16 @@ ProtocolReceive::protocol_rx_state ProtocolReceive::protocol_rx_reset() {
  */
 ProtocolReceive::protocol_rx_state ProtocolReceive::protocol_rx_check_messageid() {
 	/* If we got a RESET signal, reset the machine */
-	if (waitForEvent(PDB_EVT_PRLRX_RESET) != 0) {
-
+	if (waitForEvent(PDB_EVT_PRLRX_RESET, 0) == PDB_EVT_PRLRX_RESET) {
 		return PRLRxWaitPHY;
 	}
-
 	/* If the message has the stored ID, we've seen this message before.  Free
 	 * it and don't pass it to the policy engine. */
+
+	/* Otherwise, there's either no stored ID or this message has an ID we
+	 * haven't just seen.  Transition to the Store_MessageID state. */
 	if (PD_MESSAGEID_GET(&tempMessage) == _rx_messageid) {
 		return PRLRxWaitPHY;
-		/* Otherwise, there's either no stored ID or this message has an ID we
-		 * haven't just seen.  Transition to the Store_MessageID state. */
 	} else {
 		return PRLRxStoreMessageID;
 	}
@@ -160,12 +161,11 @@ void ProtocolReceive::thread(const void *args) {
 }
 
 void ProtocolReceive::notify(uint32_t notification) {
-	xTaskNotify(TaskHandle, notification,
-			eNotifyAction::eSetValueWithOverwrite);
+	xTaskNotify(TaskHandle, notification, eNotifyAction::eSetBits);
 }
 
 uint32_t ProtocolReceive::waitForEvent(uint32_t mask, uint32_t ticksToWait) {
 	uint32_t pulNotificationValue;
 	xTaskNotifyWait(0x00, mask, &pulNotificationValue, ticksToWait);
-	return pulNotificationValue;
+	return pulNotificationValue & mask;
 }
diff --git a/workspace/TS100/Core/Drivers/FUSB302/protocol_tx.cpp b/workspace/TS100/Core/Drivers/FUSB302/protocol_tx.cpp
index 759cb003..00fd8f02 100644
--- a/workspace/TS100/Core/Drivers/FUSB302/protocol_tx.cpp
+++ b/workspace/TS100/Core/Drivers/FUSB302/protocol_tx.cpp
@@ -45,7 +45,9 @@ ProtocolTransmit::protocol_tx_state ProtocolTransmit::protocol_tx_phy_reset() {
 		/* Tell the policy engine that we failed */
 		PolicyEngine::notify( PDB_EVT_PE_TX_ERR);
 		/* Finish failing to send the message */
-		getMessage(); //Discard
+		while (messagePending()) {
+			getMessage(); //Discard
+		}
 	}
 
 	/* Wait for a message request */
@@ -103,7 +105,7 @@ ProtocolTransmit::protocol_tx_state ProtocolTransmit::protocol_tx_reset() {
 ProtocolTransmit::protocol_tx_state ProtocolTransmit::protocol_tx_construct_message() {
 	/* Make sure nobody wants us to reset */
 	eventmask_t evt = waitForEvent(
-	PDB_EVT_PRLTX_RESET | PDB_EVT_PRLTX_DISCARD);
+	PDB_EVT_PRLTX_RESET | PDB_EVT_PRLTX_DISCARD, 0);
 
 	if (evt & PDB_EVT_PRLTX_RESET) {
 		return PRLTxPHYReset;
@@ -119,7 +121,7 @@ ProtocolTransmit::protocol_tx_state ProtocolTransmit::protocol_tx_construct_mess
 	/* PD 3.0 collision avoidance */
 	if (PolicyEngine::isPD3_0()) {
 		/* If we're starting an AMS, wait for permission to transmit */
-		evt = waitForEvent(PDB_EVT_PRLTX_START_AMS);
+		evt = waitForEvent(PDB_EVT_PRLTX_START_AMS, 0);
 		if (evt & PDB_EVT_PRLTX_START_AMS) {
 			while (fusb_get_typec_current() != fusb_sink_tx_ok) {
 				osDelay(1);
@@ -253,14 +255,14 @@ void ProtocolTransmit::thread(const void *args) {
 
 void ProtocolTransmit::notify(uint32_t notification) {
 	xTaskNotify(TaskHandle, notification,
-			eNotifyAction::eSetValueWithOverwrite);
+			eNotifyAction::eSetBits);
 }
 
 void ProtocolTransmit::init() {
 	messagesWaiting = xQueueCreateStatic(PDB_MSG_POOL_SIZE,
 			sizeof(union pd_msg), ucQueueStorageArea, &xStaticQueue);
 
-	osThreadStaticDef(pd_txTask, thread, PDB_PRIO_PRL, 0, TaskStackSize,
+	osThreadStaticDef(pd_txTask, thread,osPriorityAboveNormal, 0, TaskStackSize,
 			TaskBuffer, &TaskControlBlock);
 	TaskHandle = osThreadCreate(osThread(pd_txTask), NULL);
 }
diff --git a/workspace/TS100/Core/Inc/power.hpp b/workspace/TS100/Core/Inc/power.hpp
index c882a99a..31fddd33 100644
--- a/workspace/TS100/Core/Inc/power.hpp
+++ b/workspace/TS100/Core/Inc/power.hpp
@@ -9,6 +9,7 @@
 #include <history.hpp>
 #include "BSP.h"
 #include "expMovingAverage.h"
+#include "../../configuration.h"
 #ifndef POWER_HPP_
 #define POWER_HPP_
 
@@ -18,16 +19,6 @@
 //  This is necessary because of the temp noise and thermal lag in the system.
 // Once we have feed-forward temp estimation we should be able to better tune this.
 
-#ifdef MODEL_TS100
-const int32_t tipMass = 45; // X10 watts to raise 1 deg C in 1 second
-const uint8_t tipResistance = 85; //x10 ohms, 8.5 typical for ts100, 4.5 typical for ts80
-
-#endif
-#ifdef MODEL_TS80
-const uint32_t tipMass = 40;
-const uint8_t tipResistance = 45; //x10 ohms, 8.5 typical for ts100, 4.5 typical for ts80
-
-#endif
 const uint8_t wattHistoryFilter = 24; // I term look back weighting
 extern expMovingAverage<uint32_t, wattHistoryFilter> x10WattHistory;
 
diff --git a/workspace/TS100/Core/Src/main.cpp b/workspace/TS100/Core/Src/main.cpp
index e8258523..023fd287 100644
--- a/workspace/TS100/Core/Src/main.cpp
+++ b/workspace/TS100/Core/Src/main.cpp
@@ -43,6 +43,8 @@ int main(void) {
 	OLED::setFont(0);    // default to bigger font
 	// Testing for which accelerometer is mounted
 	resetWatchdog();
+	usb_pd_available = usb_pd_detect();
+	resetWatchdog();
 	settingsWereReset = restoreSettings();  // load the settings from flash
 	if (MMA8652FC::detect()) {
 		PCBVersion = 1;
@@ -58,8 +60,6 @@ int main(void) {
 		systemSettings.sensitivity = 0;
 	}
 	resetWatchdog();
-	usb_pd_available = usb_pd_detect();
-	resetWatchdog();
 
 	/* Create the thread(s) */
 	/* definition and creation of GUITask */
diff --git a/workspace/TS100/Makefile b/workspace/TS100/Makefile
index a9868318..ba6ba490 100644
--- a/workspace/TS100/Makefile
+++ b/workspace/TS100/Makefile
@@ -22,6 +22,7 @@ FRTOS_CMIS_INC_DIR = ./Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS
 FRTOS_INC_DIR = ./Middlewares/Third_Party/FreeRTOS/Source/include
 FRTOS_GCC_INC_DIR = ./Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM3
 DRIVER_INC_DIR =./Core/Drivers
+FUSB_DRIVERS_INC_DIR = ./Core/Drivers/FUSB302
 BSP_INC_DIR = ./Core/BSP
 MINIWARE_INC_DIR = ./Core/BSP/Miniware
 THREADS_INC_DIR = ./Core/Threads
@@ -37,7 +38,8 @@ INCLUDES = -I$(APP_INC_DIR)	\
 	-I$(DRIVER_INC_DIR) \
 	-I$(BSP_INC_DIR) \
 	-I$(MINIWARE_INC_DIR) \
-	-I$(THREADS_INC_DIR)
+	-I$(THREADS_INC_DIR) \
+	-I$(FUSB_DRIVERS_INC_DIR)
 # output folder
 HEXFILE_DIR=Hexfile
 
diff --git a/workspace/TS100/configuration.h b/workspace/TS100/configuration.h
index 1bdc13d0..66688f12 100644
--- a/workspace/TS100/configuration.h
+++ b/workspace/TS100/configuration.h
@@ -76,7 +76,6 @@
 #define DETAILED_SOLDERING        0         // 0: Disable 1: Enable - Default 0
 #define DETAILED_IDLE             0         // 0: Disable 1: Enable - Default 0
 
-
 #define CUT_OUT_SETTING           0         // default to no cut-off voltage (or 18W for TS80)
 #define TEMPERATURE_INF           0         // default to 0
 #define DESCRIPTION_SCROLL_SPEED  0         // 0: Slow 1: Fast - default to slow
@@ -94,6 +93,10 @@
 
 #define OP_AMP_GAIN_STAGE_TS80 (1+(OP_AMP_Rf_TS80/OP_AMP_Rin_TS80))
 
+//Deriving the Voltage div:
+// Vin_max = (3.3*(r1+r2))/(r2)
+//vdiv = (32768*4)/(vin_max*10)
+
 #ifdef MODEL_TS100
   #define VOLTAGE_DIV             467       // 467 - Default divider from schematic
   #define CALIBRATION_OFFSET      900       // 900 - Default adc offset in uV
@@ -105,11 +108,39 @@
 #endif
 
 #ifdef MODEL_TS80
-  #define VOLTAGE_DIV             780       // Default divider from schematic
-  #define PID_POWER_LIMIT         24        // Sets the max pwm power limit
-  #define CALIBRATION_OFFSET      900       // the adc offset in uV
-  #define POWER_LIMIT             24        // 24 watts default power limit
-  #define MAX_POWER_LIMIT         30        //
-  #define POWER_LIMIT_STEPS       2
-  #define OP_AMP_GAIN_STAGE       OP_AMP_GAIN_STAGE_TS80
+#define VOLTAGE_DIV_TS80P		768       // Default for TS80P with slightly different resistors
+#define VOLTAGE_DIV             780       // Default divider from schematic
+#define PID_POWER_LIMIT         24        // Sets the max pwm power limit
+#define CALIBRATION_OFFSET      900       // the adc offset in uV
+#define POWER_LIMIT             24        // 24 watts default power limit
+#define MAX_POWER_LIMIT         30        //
+#define POWER_LIMIT_STEPS       2
+#define OP_AMP_GAIN_STAGE       OP_AMP_GAIN_STAGE_TS80
+#endif
+
+#ifdef MODEL_TS80P
+#define VOLTAGE_DIV		        768       // Default for TS80P with slightly different resistors
+#define PID_POWER_LIMIT         30        // Sets the max pwm power limit
+#define CALIBRATION_OFFSET      900       // the adc offset in uV
+#define POWER_LIMIT             24        // 24 watts default power limit
+#define MAX_POWER_LIMIT         30        //
+#define POWER_LIMIT_STEPS       2
+#define OP_AMP_GAIN_STAGE       OP_AMP_GAIN_STAGE_TS80
+#endif
+
+
+
+#ifdef MODEL_TS100
+const int32_t tipMass = 45; // X10 watts to raise 1 deg C in 1 second
+const uint8_t tipResistance = 85; //x10 ohms, 8.5 typical for ts100, 4.5 typical for ts80
+#endif
+
+#ifdef MODEL_TS80
+const uint32_t tipMass = 40;
+const uint8_t tipResistance = 45; //x10 ohms, 4.5 typical for ts80 tips
+#endif
+
+#ifdef MODEL_TS80P
+const uint32_t tipMass = 40;
+const uint8_t tipResistance = 45; //x10 ohms, 4.5 typical for ts80 tips
 #endif