me/IronOS
1
0
Fork 1
mirror of https://github.com/Ralim/IronOS.git synced 2025-02-26 07:53:55 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

S60 Support (#1692)

Browse Source 
* Mock S60

* cleanup

* Start refactor of OLED init

* Setup timers roughly

* Set Vector table offset correctly

Update system_stm32f1xx.c

* Update OLED.cpp

* Update stm32f1xx_hal_msp.c

* Update configuration.h

* I2C init before GPIO

From Errata

Update stm32f1xx_hal_msp.c

Update Software_I2C.h

Allow no hardware I2C

* I2C BB run bus unlock at init

* cleanups

* Software I2C for now

* Mildly more graceful Interpolate

* Handle is powered by DC

Update Power.cpp

Update drawPowerSourceIcon.cpp

Update configuration.h

Update Setup.cpp

* Cleanup HomeScreen

* Segment remap oled at init

* Cleanup

* Update MOVThread.cpp

* Fix PWM Init

* Fix adc2 trigger

* Update configs

* Fixup warning

* Saner default config

* Update ThermoModel.cpp

* Util for current@voltage

* Hub238 warning

* Add hub238 handling in power mode

* Update USBPDDebug_FUSB.cpp

* HUSB238 debug

* Hook PSU Limit

* Use wrapping section of GRAM for scroll

Update OLED.hpp

* Update NTC table

* Fix HUB voltage picker

* Cleanup

* Larger tip filter

* Calibrate in a bunch closer

Update ThermoModel.cpp

* Update configuration.h

* Update HUB238.cpp

* Update configuration.h

* Movement Pin

* Update BSP.cpp

* tim2 irq

* Rough timer conversion (adc broken) but movement working

* Fix tim2 start

* Faster base PWM

* Ensure utils grabs config

* Add wattage limiter tolerance for device

* Speed up PWM and enable PWM current limiting

* tune for 12v

* Prevent start until PD done

* Update configuration.h

* Add HUB238 check for have re-negotiated

* Adjust timer to avoid noise when its possible
This commit is contained in:
Ben V. Brown
2023-06-03 20:05:31 +10:00
committed by GitHub
parent 1acb29fcf3
commit 286afad919
116 changed files with 72488 additions and 259 deletions
Download Patch File Download Diff File Expand all files Collapse all files

27
source/Core/Drivers/Utils.cpp
View File

@@ -5,19 +5,30 @@
* Author: Ralim
*/
#include "BSP_Power.h"
#include "configuration.h"
#include <Utils.h>
int32_t Utils::InterpolateLookupTable(const int32_t *lookupTable, const int noItems, const int32_t value) {
if (value) {
for (int i = 1; i < (noItems - 1); i++) {
// If current tip temp is less than current lookup, then this current lookup is the higher point to interpolate
if (value < lookupTable[i * 2]) {
return LinearInterpolate(lookupTable[(i - 1) * 2], lookupTable[((i - 1) * 2) + 1], lookupTable[i * 2], lookupTable[(i * 2) + 1], value);
}
for (int i = 1; i < (noItems - 1); i++) {
// If current tip temp is less than current lookup, then this current lookup is the higher point to interpolate
if (value < lookupTable[i * 2]) {
return LinearInterpolate(lookupTable[(i - 1) * 2], lookupTable[((i - 1) * 2) + 1], lookupTable[i * 2], lookupTable[(i * 2) + 1], value);
}
return LinearInterpolate(lookupTable[(noItems - 2) * 2], lookupTable[((noItems - 2) * 2) + 1], lookupTable[(noItems - 1) * 2], lookupTable[((noItems - 1) * 2) + 1], value);
}
return 0;
return LinearInterpolate(lookupTable[(noItems - 2) * 2], lookupTable[((noItems - 2) * 2) + 1], lookupTable[(noItems - 1) * 2], lookupTable[((noItems - 1) * 2) + 1], value);
}
int32_t Utils::LinearInterpolate(int32_t x1, int32_t y1, int32_t x2, int32_t y2, int32_t x) { return y1 + (((((x - x1) * 1000) / (x2 - x1)) * (y2 - y1))) / 1000; }
uint16_t Utils::RequiredCurrentForTipAtVoltage(uint16_t voltageX10) {
uint8_t tipResistancex10 = getTipResistanceX10() + 5;
#ifdef MODEL_HAS_DCDC
// If this device has step down DC/DC inductor to smooth out current spikes
// We can instead ignore resistance and go for max voltage we can accept; and rely on the DC/DC regulation to keep under current limit
tipResistancex10 = 255; // (Push to 25.5 ohms to effectively disable this check)
#endif
// V/R = I
uint16_t currentX10 = (voltageX10 * 10) / tipResistancex10;
return currentX10;
}