S60 Support (#1692)

* Mock S60

* cleanup

* Start refactor of OLED init

* Setup timers roughly

* Set Vector table offset correctly

Update system_stm32f1xx.c

* Update OLED.cpp

* Update stm32f1xx_hal_msp.c

* Update configuration.h

* I2C init before GPIO

From Errata

Update stm32f1xx_hal_msp.c

Update Software_I2C.h

Allow no hardware I2C

* I2C BB run bus unlock at init

* cleanups

* Software I2C for now

* Mildly more graceful Interpolate

* Handle is powered by DC

Update Power.cpp

Update drawPowerSourceIcon.cpp

Update configuration.h

Update Setup.cpp

* Cleanup HomeScreen

* Segment remap oled at init

* Cleanup

* Update MOVThread.cpp

* Fix PWM Init

* Fix adc2 trigger

* Update configs

* Fixup warning

* Saner default config

* Update ThermoModel.cpp

* Util for current@voltage

* Hub238 warning

* Add hub238 handling in power mode

* Update USBPDDebug_FUSB.cpp

* HUSB238 debug

* Hook PSU Limit

* Use wrapping section of GRAM for scroll

Update OLED.hpp

* Update NTC table

* Fix HUB voltage picker

* Cleanup

* Larger tip filter

* Calibrate in a bunch closer

Update ThermoModel.cpp

* Update configuration.h

* Update HUB238.cpp

* Update configuration.h

* Movement Pin

* Update BSP.cpp

* tim2 irq

* Rough timer conversion (adc broken) but movement working

* Fix tim2 start

* Faster base PWM

* Ensure utils grabs config

* Add wattage limiter tolerance for device

* Speed up PWM and enable PWM current limiting

* tune for 12v

* Prevent start until PD done

* Update configuration.h

* Add HUB238 check for have re-negotiated

* Adjust timer to avoid noise when its possible

source/Core/BSP/Pinecil/IRQ.cpp

@@ -93,7 +93,7 @@ void setTipPWM(const uint8_t pulse, const bool shouldUseFastModePWM) {
 extern osThreadId POWTaskHandle;
 
 void EXTI5_9_IRQHandler(void) {
-#if POW_PD
+#ifdef POW_PD
   if (RESET != exti_interrupt_flag_get(EXTI_5)) {
     exti_interrupt_flag_clear(EXTI_5);
 

source/Core/BSP/Pinecil/Power.cpp

@@ -7,7 +7,7 @@
 #include "configuration.h"
 
 void power_check() {
-#if POW_PD
+#ifdef POW_PD
   // Cant start QC until either PD works or fails
   if (!USBPowerDelivery::negotiationComplete()) {
     return;
@@ -22,7 +22,7 @@ void power_check() {
 }
 
 bool getIsPoweredByDCIN() {
-#if POW_PD
+#ifdef POW_PD
   if (!USBPowerDelivery::negotiationComplete()) {
     return false; // We are assuming not dc while negotiating
   }

source/Core/BSP/Pinecil/fusb_user.cpp

@@ -1,5 +1,5 @@
 #include "configuration.h"
-#if POW_PD
+#ifdef POW_PD
 #include "BSP.h"
 #include "I2C_Wrapper.hpp"
 #include "Setup.h"