me/IronOS
1
0
Fork 1
mirror of https://github.com/Ralim/IronOS.git synced 2025-02-26 07:53:55 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

Move related pieces of documentation from wiki to Documentation/ (#1746)

Browse Source 
* Move TS100 info from wiki to Hardware.md

* Move TS80 info from wiki to Hardware.md

* Move TS80P info from wiki to Hardware.md

* Move Pinecil info from wiki to Hardware.md

* Move some info from Home.md wiki to Documentation/index.md

* Fix path inside docker since Dockerfile has been updated to be in the root project tree after starting container

* Move info from Home.md wiki to Documentation/Hardware.md

* mkdocs.yml: swtich config to forked repo for testing formatting online

* Fix formatting

* Fix formatting (md != rtd)

* Fix formatting for index.md

* Revert mkdocs config to original one after testing

* Documentation/: add power sources info

* Documentation/README.md: update with power sources

* tiny fixes with formatting

* Reformat links to stores

* Fix footnote on _default_ charger for TS80P

* Revert mkdocs config

* Fix footnote about wattage for QC, try fix table in index.md
This commit is contained in:
Ivan Zorin
2023-07-20 04:55:08 +03:00
committed by GitHub
parent 297a4dffa5
commit 1c9d3940ca
7 changed files with 161 additions and 8 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
Documentation/Power.md
View File

@@ -20,6 +20,8 @@ The resistance of the tip is a fixed constant in ohms (Ω):
This means the power delivered to the soldering tip is proportional to the voltage squared.
Therefore the Pinecil and TS100 perform poorly when run off 12V power supplies and may issue a `Thermal Runaway` message (weak power supply).
#### Use an [Ohm calculator](https://www.rapidtables.com/calc/electric/power-calculator.html#dc) to quickly derive watts.
| Type | Volts| / | Tip Ω | = | Amps | * | Volts | = | Watts |
@@ -44,3 +46,8 @@ To measure the tip temperature in the iron, the iron has a small op-amp connecte
Once the output is turned off (via the FET), the system has a recovery time as the tip capacitance discharges and the op-amp exits saturation. After this delay period, the MCU's ADC (analog-to-digital converter) samples the output of the op-amp 8 times quickly and then sets a flag to turn the PWM output back on.
This enforces a small dead time in the output signal while this occurs, so there is a balance between sampling the temperature often to maintain a stable tip temperature control and sampling less often to increase the maximum power deliverable to the tip ([see Complexity of measurement](https://ralim.github.io/IronOS/Temperature/#complexity-of-measurement)).
## Power sources
Supported by IronOS hardware may use different power sources (chargers/powerbanks/battery packs) with different standards & protocols (QC/PD/etc). For more information collected by the community on that, please, [see the related documentation section](https://ralim.github.io/IronOS/PowerSources/).