me/IronOS
1
0
Fork 1
mirror of https://github.com/Ralim/IronOS.git synced 2025-02-26 07:53:55 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

Rough pass new PID

Browse Source
This commit is contained in:
Ben V. Brown
2021-09-12 20:59:40 +10:00
parent 416af2ff70
commit 159ae7a8e2
1 changed files with 63 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files

69
source/Core/Threads/PIDThread.cpp
View File

@@ -24,6 +24,7 @@ bool heaterThermalRunaway = false;
static int32_t getPIDResultX10Watts(int32_t tError);
static void detectThermalRunaway(const int16_t currentTipTempInC, const int tError);
static void setOutputx10WattsViaFilters(int32_t x10Watts);
static int32_t getX10WattageLimits();
/* StartPIDTask function */
void startPIDTask(void const *argument __unused) {
@@ -77,7 +78,55 @@ void startPIDTask(void const *argument __unused) {
}
}
}
#define TRIAL_NEW_PID
#ifdef TRIAL_NEW_PID
int32_t getPIDResultX10Watts(int32_t setpointDelta) {
static int32_t runningSum = 0;
//////////////////////////////////////////////////////////////////////////////////////////////////////////
// Sandman note:
// PID Challenge - we have a small thermal mass that we to want heat up as fast as possible but we don't //
// want to overshot excessively (if at all) the setpoint temperature. In the same time we have 'imprecise' //
// instant temperature measurements. The nature of temperature reading imprecision is not necessarily //
// related to the sensor (thermocouple) or DAQ system, that otherwise are fairly decent. The real issue is //
// the thermal inertia. We basically read the temperature in the window between two heating sessions when //
// the output is off. However, the heater temperature does not dissipate instantly into the tip mass so //
// at any moment right after heating, the thermocouple would sense a temperature significantly higher than //
// moments later. We could use longer delays but that would slow the PID loop and that would lead to other //
// negative side effects. As a result, we can only rely on the I term but with a twist. Instead of a simple //
// integrator we are going to use a self decaying integrator that acts more like a dual I term / P term //
// rather than a plain I term. Depending on the circumstances, like when the delta temperature is large, //
// it acts more like a P term whereas on closing to setpoint it acts increasingly closer to a plain I term. //
// So in a sense, we have a bit of both. //
// So there we go...
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// P = (Thermal Mass) x (Delta Temperature / T_FACTOR) / 1sec, where thermal mass is in X10 J / °C and
// delta temperature is in T_FACTOR x °C. The result is the power in X10 W needed to raise (or decrease!) the
// tip temperature with (Delta Temperature / T_FACTOR) °C in 1 second.
// Note on powerStore. On update, if the value is provided in X10 (W) units then inertia shall be provided
// in X10 (J / °C) units as well. Also, powerStore is updated with a gain of 2. Where this comes from: The actual
// power CMOS is controlled by TIM3->CTR1 (that is software modulated - on/off - by TIM2-CTR4 interrupts). However,
// TIM3->CTR1 is configured with a duty cycle of 50% so, in real, we get only 50% of the presumed power output
// so we basically double the need (gain = 2) to get what we want.
// Decay the old value. This is a simplified formula that still works with decent results
// Ideally we would have used an exponential decay but the computational effort required
// by exp function is just not justified here in respect to the outcome
const int gain = 2;
runningSum = runningSum * (100 - tipMass / 10) / 100;
// Add the new value x integration interval ( 1 / rate)
runningSum += (gain * tempToX10Watts(setpointDelta)) / 10;
int32_t limit = getX10WattageLimits();
// limit the output
if (runningSum > limit)
runningSum = limit;
else if (runningSum < -limit)
runningSum = -limit;
return runningSum;
}
#else
int32_t getPIDResultX10Watts(int32_t tError) {
// Now for the PID!
@@ -107,7 +156,7 @@ int32_t getPIDResultX10Watts(int32_t tError) {
// Unfortunately, our temp signal is too noisy to really help.
return x10WattsOut;
}
#endif
void detectThermalRunaway(const int16_t currentTipTempInC, const int tError) {
static uint16_t tipTempCRunawayTemp = 0;
static TickType_t runawaylastChangeTime = 0;
@@ -136,6 +185,17 @@ void detectThermalRunaway(const int16_t currentTipTempInC, const int tError) {
}
}
int32_t getX10WattageLimits() {
int32_t limit = 900; // 90W
if (getSettingValue(SettingsOptions::PowerLimit) && limit > (getSettingValue(SettingsOptions::PowerLimit) * 10)) {
limit = getSettingValue(SettingsOptions::PowerLimit) * 10;
}
if (powerSupplyWattageLimit && limit > powerSupplyWattageLimit * 10) {
limit = powerSupplyWattageLimit * 10;
}
return limit;
}
void setOutputx10WattsViaFilters(int32_t x10WattsOut) {
static TickType_t lastPowerPulseStart = 0;
static TickType_t lastPowerPulseEnd = 0;
@@ -165,11 +225,8 @@ void setOutputx10WattsViaFilters(int32_t x10WattsOut) {
if (heaterThermalRunaway) {
x10WattsOut = 0;
}
if (getSettingValue(SettingsOptions::PowerLimit) && x10WattsOut > (getSettingValue(SettingsOptions::PowerLimit) * 10)) {
x10WattsOut = getSettingValue(SettingsOptions::PowerLimit) * 10;
}
if (powerSupplyWattageLimit && x10WattsOut > powerSupplyWattageLimit * 10) {
x10WattsOut = powerSupplyWattageLimit * 10;
if (x10WattsOut > getX10WattageLimits()) {
x10WattsOut = getX10WattageLimits();
}
#ifdef SLEW_LIMIT
if (x10WattsOut - x10WattsOutLast > SLEW_LIMIT) {