From 109b3436e6e7226c3467047a1116b95a6a57224f Mon Sep 17 00:00:00 2001 From: "Ben V. Brown" Date: Fri, 11 Aug 2017 14:51:51 +1000 Subject: [PATCH] Update README.md --- README.md | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) diff --git a/README.md b/README.md index f8a3f685..ac7f88c4 100644 --- a/README.md +++ b/README.md @@ -48,19 +48,7 @@ There is a complete device flash backup included in this repository. (Note this This firmware uses a different method of updating the bootup image. This removes the need for emulating a USB drive on the iron just to allow for a bootup image to be setup. -At this point in time you will need a windows machine to make the required .hex file for you image. -*If you know what your doing, this program will run fine through mono on other systems* - -1. On the [releases page](https://github.com/Ralim/ts100/releases) you will need to download the latest copy of the GUI Tool (*TS100.Logo.Editor.exe*). -2. Launch the TS100 Logo Editor, you will need to have .NET 4.0 installed on your machine -3. On the tool open the source image that you would like to use as your bootup screen. A resolution of 96x16 is ideal, but you can fill or stretch your logo to fit -4. Colour images are okay, the software will convert them to B&W for you. -5. You can also invert colours if you would prefer. -6. Save the created file as a *.hex* file somewhere. -7. Connect your iron to your computer in DFU mode (same as you would to upgrade firmware). -8. Drag the created .hex file for the logo onto the iron to update it with the file. -9. You should be good to go. -10. The image will stay through future updates, but if it ever wont I will put a warning in the update download on the releases page. +There are further instructions on the [wiki](https://github.com/Ralim/ts100/wiki/Logo-Editor). Instructions are kept on the wiki so that users can update the information if they find extra helpful information. ## New Menu System