me/IronOS
1
0
Fork 1
mirror of https://github.com/Ralim/IronOS.git synced 2025-02-26 07:53:55 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

Bootup logo settings (#1241)

Browse Source 
Adds ability to adjust the time shown for the bootup logo.
This commit is contained in:
discip
2022-04-02 03:39:14 +02:00
committed by GitHub
parent 62dd2abf12
commit 0b8192b690
42 changed files with 750 additions and 1013 deletions
Download Patch File Download Diff File Expand all files Collapse all files

28
Translations/translations_def.js
View File

@@ -16,7 +16,7 @@ var def =
},
{
"id": "UndervoltageString",
"maxLen": 16,
"maxLen": 15,
"description": "Warning text shown when the unit turns off due to undervoltage in advanced mode."
},
{
@@ -33,7 +33,7 @@ var def =
},
{
"id": "SleepingAdvancedString",
"maxLen": 16,
"maxLen": 15,
"description": "The text shown to indicate the unit is in sleep mode when the advanced view is turned on."
},
{
@@ -285,20 +285,20 @@ var def =
{
"id": "TemperatureCalibration",
"maxLen": 8,
"maxLen2": 16,
"maxLen2": 15,
"description": "Used to calibrate the ADC+Op-amp offsets for the tip. This calibration must be performed when the tip temperature and the handle temperature are equal. Generally not required unless your device is reading more than 5°C off target."
},
{
"id": "SettingsReset",
"maxLen": 8,
"maxLen2": 16,
"maxLen2": 15,
"description": "Resets all settings and calibrations to factory defaults. Does NOT erase custom user boot up logo's."
},
{
"id": "VoltageCalibration",
"maxLen": 8,
"maxLen2": 16,
"maxLen2": 15,
"description": "Enters an adjustment mode where you can gradually adjust the measured voltage to compensate for any unit-to-unit variance in the voltage sense resistors."
},
{
@@ -317,13 +317,13 @@ var def =
{
"id": "QCMaxVoltage",
"maxLen": 8,
"maxLen2": 16,
"maxLen2": 15,
"description": "This adjusts the maximum voltage the QC negotiation will adjust to. Does NOT affect USB-PD. Should be set safely based on the current rating of your power supply."
},
{
"id": "PDNegTimeout",
"maxLen": 8,
"maxLen2": 16,
"maxLen2": 15,
"description": "How long until firmware stops trying to negotiate for USB-PD and tries QC instead. Longer times may help dodgy / old PD adapters, faster times move onto PD quickly. Units of 100ms. Recommended to keep small values."
},
@@ -338,27 +338,27 @@ var def =
{
"id": "ReverseButtonTempChange",
"maxLen": 6,
"maxLen2": 16,
"maxLen2": 15,
"description": "Swaps which button increments and decrements on temperature change screens."
},
{
"id": "TempChangeShortStep",
"maxLen": 8,
"maxLen2": 16,
"maxLen2": 15,
"description": "Factor by which the temperature is changed with a quick press of the buttons."
},
{
"id": "TempChangeLongStep",
"maxLen": 6,
"maxLen2": 16,
"maxLen2": 15,
"description": "Factor by which the temperature is changed with a hold of the buttons."
},
{
"id": "PowerPulsePower",
"maxLen": 6,
"maxLen2": 16,
"maxLen2": 15,
"description": "Enables and sets the wattage of the power pulse. Power pulse causes the device to briefly turn on the heater to draw power to avoid power banks going to sleep."
},
@@ -422,6 +422,12 @@ var def =
"maxLen": 7,
"maxLen2": 15,
"description": "Inverts the entire OLED."
},
{
"id": "LOGOTime",
"maxLen": 7,
"maxLen2": 15,
"description": "Sets the duration for the boot logo (S=seconds)."
}
]
}