me/IronOS
1
0
Fork 1
mirror of https://github.com/Ralim/IronOS.git synced 2025-02-26 07:53:55 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

Merge Dev into mainline (#1)

Browse Source 
* Removing USB
Need to refine the drive to the iron tip

* Update README.md

* * Rewrite all code from scratch
* Only kept settings
* New font
* New PID
* New Menus
* Use Hardware I2C
* Faster System
* Better Heating Time
* No USB
* Full Menu System
This commit is contained in:
Ben V. Brown
2016-09-30 00:27:55 +10:00
committed by GitHub
parent 278d29bf4c
commit 0b26e669af
77 changed files with 3669 additions and 10430 deletions
Download Patch File Download Diff File Expand all files Collapse all files

88
workspace/ts100/src/Main.c
View File

@@ -1,63 +1,41 @@
/********************* (C) COPYRIGHT 2015 e-Design Co.,Ltd. **********************
File Name : main.c
Version : S100 APP Ver 2.11
Description:
Author : Celery
Data: 2015/07/07
History:
2016/8/11 Updates by Ben V. Brown <ralim@ralimtek.com> - Cleanup and english comments
2015/07/07 ͳһ<CDB3><D2BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
*******************************************************************************/
#include <string.h>
#include <stdio.h>
#include "APP_Version.h"
#include "Disk.h"
/*
* Created by Ben V. Brown
*/
#include "Modes.h"
#include "Bios.h"
#include "usb_lib.h"
#include "I2C.h"
#include "Flash.h"
#include "MMA8652FC.h"
#include "UI.h"
#include "PID.h"
#include "Oled.h"
#include "CTRL.h"
#include "Hardware.h"
#include "Settings.h"
#include "I2C.h"
void setup();
int main(void) {
RCC_Config(); //setup system clock
NVIC_Config(0x4000);
Init_Timer2(); //init the timers
Init_Timer3();
GPIO_Config();//setup all the GPIO pins
USB_Port(DISABLE);//disable the USB hardware
Delay_Ms(200);//pause to let hardware stabilize
USB_Port(ENABLE);//enable the USB hardware
USB_Init();
I2C_Configuration(); //init the i2c bus
Adc_Init(); //init adc and dma
if (Get_CtrlStatus() != CONFIG)
StartUp_Accelerated();//start the accelerometer if not in config mode
System_Init();//load known safe values
Init_Oled();//init the OLED display
Clear_Screen();//clear the display buffer to black
Init_Gtime();//init the count down timers
APP_Init();//pick operating mode via input voltage
Disk_BuffInit();//fill the buffer for the virtual disk
Config_Analysis(); //read in config from virtual disk
Pid_Init(); //init the pid to starting values
Set_gKey(NO_KEY); //reset keys to all off
Start_Watchdog(3000);//start the system watchdog as 3 seconds
setup();
while (1) {
Clear_Watchdog(); //reset the Watchdog
if (Get_CtrlStatus() != CONFIG && LEAVE_WAIT_TIMER== 0) {
Check_Accelerated(); //update readings from the accelerometer
LEAVE_WAIT_TIMER = 50;//reset timer so we dont poll accelerometer for another 500ms
}
OLed_Display(); //Draw in the Oled display for this mode
Status_Tran(); //Handle user input and mode changing
ProcessUI();
DrawUI();
delayMs(50);
}
}
/******************************** END OF FILE *********************************/
void setup()
{
RCC_Config(); //setup system clock
NVIC_Config(0x4000); //this shifts the NVIC table to be offset, for the usb bootloader's size
GPIO_Config(); //setup all the GPIO pins
Init_EXTI(); //init the EXTI inputs
Init_Timer3(); //Used for the soldering iron tip
Adc_Init(); //init adc and dma
I2C_Configuration(); //Start the I2C hardware
GPIO_Init_OLED(); //Init the GPIO ports for the OLED
StartUp_Accelerometer(); //start the accelerometer
Init_Oled(); //init the OLED display
Clear_Screen(); //clear the display buffer to black
setupPID(); //init the PID values
readIronTemp(239, 0); //load the default calibration value
restoreSettings(); //Load settings
Start_Watchdog(1000); //start the system watchdog as 1 seconds timeout
}