me/IronOS
1
0
Fork 1
mirror of https://github.com/Ralim/IronOS.git synced 2025-02-26 07:53:55 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

Increase PWM output range to 0-255

Browse Source 
For #358
Also fixes #394
This commit is contained in:
Ben V. Brown
2018-10-29 20:55:40 +11:00
parent 81e87c86d0
commit 02bdf450b2
7 changed files with 741 additions and 721 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
workspace/TS100/inc/hardware.h
View File

@@ -115,6 +115,7 @@ enum TipType {
}; };
#endif #endif
uint16_t lookupTipDefaultCalValue(enum TipType tipID);
uint16_t getHandleTemperature(); uint16_t getHandleTemperature();
uint16_t getTipRawTemp(uint8_t instant); uint16_t getTipRawTemp(uint8_t instant);
uint16_t getInputVoltageX10(uint16_t divisor); uint16_t getInputVoltageX10(uint16_t divisor);

11
workspace/TS100/src/Setup.c
View File

@@ -308,9 +308,12 @@ static void MX_TIM2_Init(void) {
// in the PWM off time. // in the PWM off time.
htim2.Instance = TIM2; htim2.Instance = TIM2;
htim2.Init.Prescaler = htim2.Init.Prescaler =
2000; // pwm out is 10k, we want to run our PWM at around 100hz 785; // pwm out is 10k from tim3, we want to run our PWM at around 10hz or slower on the output stage
// The input is 1mhz after the div/4, so divide this by 785 to give around 4Hz output change rate
//Trade off is the slower the PWM output the slower we can respond and we gain temperature accuracy in settling time,
//But it increases the time delay between the heat cycle and the measurement and calculate cycle
htim2.Init.CounterMode = TIM_COUNTERMODE_UP; htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
htim2.Init.Period = 122; htim2.Init.Period = 255+56;
htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV4; // 4mhz before divide htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV4; // 4mhz before divide
htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE; htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
HAL_TIM_Base_Init(&htim2); HAL_TIM_Base_Init(&htim2);
@@ -326,11 +329,11 @@ static void MX_TIM2_Init(void) {
HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig); HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig);
sConfigOC.OCMode = TIM_OCMODE_PWM1; sConfigOC.OCMode = TIM_OCMODE_PWM1;
sConfigOC.Pulse = 118; sConfigOC.Pulse = 255+47; //255 is the largest time period of the drive signal, and the 47 offsets this around 5ms afterwards
/* /*
* It takes 4 milliseconds for output to be stable after PWM turns off. * It takes 4 milliseconds for output to be stable after PWM turns off.
* Assume ADC samples in 0.5ms * Assume ADC samples in 0.5ms
* We need to set this to 100% + 5.5ms * We need to set this to 100% + 4.5ms
* */ * */
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH; sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
sConfigOC.OCFastMode = TIM_OCFAST_ENABLE; sConfigOC.OCFastMode = TIM_OCFAST_ENABLE;

1286
workspace/TS100/src/gui.cpp
View File

File diff suppressed because it is too large Load Diff

48
workspace/TS100/src/hardware.c
View File

@@ -12,7 +12,6 @@
volatile uint16_t PWMSafetyTimer = 0; volatile uint16_t PWMSafetyTimer = 0;
volatile int16_t CalibrationTempOffset = 0; volatile int16_t CalibrationTempOffset = 0;
uint16_t tipGainCalValue = 0; uint16_t tipGainCalValue = 0;
uint16_t lookupTipDefaultCalValue(enum TipType tipID);
void setTipType(enum TipType tipType, uint8_t manualCalGain) { void setTipType(enum TipType tipType, uint8_t manualCalGain) {
if (manualCalGain) if (manualCalGain)
tipGainCalValue = manualCalGain; tipGainCalValue = manualCalGain;
@@ -171,14 +170,14 @@ uint8_t QCMode = 0;
uint8_t QCTries = 0; uint8_t QCTries = 0;
void seekQC(int16_t Vx10,uint16_t divisor) { void seekQC(int16_t Vx10,uint16_t divisor) {
if (QCMode == 5) if (QCMode == 5)
startQC(divisor); startQC(divisor);
if (QCMode == 0) if (QCMode == 0)
return; // NOT connected to a QC Charger return; // NOT connected to a QC Charger
if (Vx10 < 50) if (Vx10 < 50)
return; return;
if(Vx10>130) if(Vx10>130)
Vx10=130;//Cap max value at 13V Vx10=130;//Cap max value at 13V
// Seek the QC to the Voltage given if this adapter supports continuous mode // Seek the QC to the Voltage given if this adapter supports continuous mode
// try and step towards the wanted value // try and step towards the wanted value
@@ -250,7 +249,7 @@ void startQC(uint16_t divisor) {
// negotiating as someone is feeding in hv // negotiating as someone is feeding in hv
uint16_t vin = getInputVoltageX10(divisor); uint16_t vin = getInputVoltageX10(divisor);
if (vin > 150) if (vin > 150)
return; // Over voltage return;// Over voltage
if (vin > 100) { if (vin > 100) {
QCMode = 1; // ALready at ~12V QCMode = 1; // ALready at ~12V
return; return;
@@ -292,7 +291,7 @@ void startQC(uint16_t divisor) {
} }
// Check if D- is low to spot a QC charger // Check if D- is low to spot a QC charger
if (HAL_GPIO_ReadPin(GPIOA, GPIO_PIN_11) == GPIO_PIN_RESET) if (HAL_GPIO_ReadPin(GPIOA, GPIO_PIN_11) == GPIO_PIN_RESET)
enteredQC = 1; enteredQC = 1;
if (enteredQC) { if (enteredQC) {
// We have a QC capable charger // We have a QC capable charger
HAL_GPIO_WritePin(GPIOB, GPIO_PIN_3, GPIO_PIN_SET); HAL_GPIO_WritePin(GPIOB, GPIO_PIN_3, GPIO_PIN_SET);
@@ -312,7 +311,7 @@ void startQC(uint16_t divisor) {
for (uint8_t i = 0; i < 10; i++) { for (uint8_t i = 0; i < 10; i++) {
if (getInputVoltageX10(divisor) > 80) { if (getInputVoltageX10(divisor) > 80) {
// yay we have at least QC2.0 or QC3.0 // yay we have at least QC2.0 or QC3.0
QCMode = 3; // We have at least QC2, pray for 3 QCMode = 3;// We have at least QC2, pray for 3
HAL_GPIO_WritePin(GPIOB, GPIO_PIN_3, GPIO_PIN_RESET); HAL_GPIO_WritePin(GPIOB, GPIO_PIN_3, GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_8, GPIO_PIN_SET); HAL_GPIO_WritePin(GPIOA, GPIO_PIN_8, GPIO_PIN_SET);
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_10, GPIO_PIN_SET); HAL_GPIO_WritePin(GPIOA, GPIO_PIN_10, GPIO_PIN_SET);
@@ -323,14 +322,14 @@ void startQC(uint16_t divisor) {
QCMode = 5; QCMode = 5;
QCTries++; QCTries++;
if (QCTries > 10) // 10 goes to get it going if (QCTries > 10) // 10 goes to get it going
QCMode = 0; QCMode = 0;
} else { } else {
// no QC // no QC
QCMode = 0; QCMode = 0;
} }
if (QCTries > 10) if (QCTries > 10)
QCMode = 0; QCMode = 0;
} }
// Get tip resistance in milliohms // Get tip resistance in milliohms
uint32_t calculateTipR(uint8_t useFilter) { uint32_t calculateTipR(uint8_t useFilter) {
@@ -344,7 +343,7 @@ uint32_t calculateTipR(uint8_t useFilter) {
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_0, GPIO_PIN_RESET); // Set low first HAL_GPIO_WritePin(GPIOA, GPIO_PIN_0, GPIO_PIN_RESET);// Set low first
setTipPWM(0); setTipPWM(0);
vTaskDelay(1); vTaskDelay(1);
uint32_t offReading = getTipInstantTemperature(); uint32_t offReading = getTipInstantTemperature();
@@ -358,8 +357,8 @@ uint32_t calculateTipR(uint8_t useFilter) {
} }
// Turn on // Turn on
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_0, GPIO_PIN_SET); // Set low first HAL_GPIO_WritePin(GPIOA, GPIO_PIN_0, GPIO_PIN_SET);// Set low first
vTaskDelay(1); // delay to allow it too stabilize vTaskDelay(1);// delay to allow it too stabilize
uint32_t onReading = getTipInstantTemperature(); uint32_t onReading = getTipInstantTemperature();
for (uint8_t i = 0; i < 24; i++) { for (uint8_t i = 0; i < 24; i++) {
if (useFilter == 0) { if (useFilter == 0) {
@@ -377,7 +376,7 @@ uint32_t calculateTipR(uint8_t useFilter) {
// 4688 milliohms (Measured using 4 terminal measurement) 25x oversampling // 4688 milliohms (Measured using 4 terminal measurement) 25x oversampling
// reads this as around 47490 Almost perfectly 10x the milliohms value This // reads this as around 47490 Almost perfectly 10x the milliohms value This
// will drift massively with tip temp However we really only need 10x ohms // will drift massively with tip temp However we really only need 10x ohms
return (difference / 10) + 1; // ceil return (difference / 10) + 1;// ceil
} }
static unsigned int sqrt32(unsigned long n) { static unsigned int sqrt32(unsigned long n) {
unsigned int c = 0x8000; unsigned int c = 0x8000;
@@ -385,10 +384,10 @@ static unsigned int sqrt32(unsigned long n) {
for (;;) { for (;;) {
if (g * g > n) if (g * g > n)
g ^= c; g ^= c;
c >>= 1; c >>= 1;
if (c == 0) if (c == 0)
return g; return g;
g |= c; g |= c;
} }
} }
@@ -399,26 +398,26 @@ int16_t calculateMaxVoltage(uint8_t useFilter, uint8_t useHP) {
uint32_t milliOhms = calculateTipR(useFilter); uint32_t milliOhms = calculateTipR(useFilter);
// Check no tip // Check no tip
if (milliOhms > 10000) if (milliOhms > 10000)
return -1; return -1;
// //
// V = sqrt(18W*R) // V = sqrt(18W*R)
// Convert this to sqrt(18W)*sqrt(milli ohms)*sqrt(1/1000) // Convert this to sqrt(18W)*sqrt(milli ohms)*sqrt(1/1000)
uint32_t Vx = sqrt32(milliOhms); uint32_t Vx = sqrt32(milliOhms);
if (useHP) if (useHP)
Vx *= 1549; //sqrt(24)*sqrt(1/1000) Vx *= 1549;//sqrt(24)*sqrt(1/1000)
else else
Vx *= 1342; // sqrt(18) * sqrt(1/1000) Vx *= 1342;// sqrt(18) * sqrt(1/1000)
// Round to nearest 200mV, // Round to nearest 200mV,
// So divide by 100 to start, to get in Vxx // So divide by 100 to start, to get in Vxx
Vx /= 100; Vx /= 100;
if (Vx % 10 >= 5) if (Vx % 10 >= 5)
Vx += 10; Vx += 10;
Vx /= 10; Vx /= 10;
// Round to nearest increment of 2 // Round to nearest increment of 2
if (Vx % 2 == 1) if (Vx % 2 == 1)
Vx++; Vx++;
return Vx; return Vx;
} }
@@ -430,9 +429,10 @@ uint8_t getTipPWM() {
void setTipPWM(uint8_t pulse) { void setTipPWM(uint8_t pulse) {
PWMSafetyTimer = 2; // This is decremented in the handler for PWM so that the tip pwm is PWMSafetyTimer = 2; // This is decremented in the handler for PWM so that the tip pwm is
// disabled if the PID task is not scheduled often enough. // disabled if the PID task is not scheduled often enough.
if (pulse > 100) if (pulse > 255)
pulse = 100; pulse = 255;
if (pulse == 0) // Need to have some pulse to keep the PID controller moving forward as these end of cycle completions move the thread along
pulse = 1;
pendingPWM = pulse; pendingPWM = pulse;
} }

112
workspace/TS100/src/main.cpp
View File

@@ -259,34 +259,37 @@ static void gui_drawBatteryIcon() {
// User is on a lithium battery // User is on a lithium battery
// we need to calculate which of the 10 levels they are on // we need to calculate which of the 10 levels they are on
uint8_t cellCount = systemSettings.cutoutSetting + 2; uint8_t cellCount = systemSettings.cutoutSetting + 2;
uint16_t cellV = getInputVoltageX10(systemSettings.voltageDiv) / cellCount; uint16_t cellV = getInputVoltageX10(systemSettings.voltageDiv)
/ cellCount;
// Should give us approx cell voltage X10 // Should give us approx cell voltage X10
// Range is 42 -> 33 = 9 steps therefore we will use battery 1-10 // Range is 42 -> 33 = 9 steps therefore we will use battery 1-10
if (cellV < 33) cellV = 33; if (cellV < 33)
cellV -= 33;// Should leave us a number of 0-9 cellV = 33;
if (cellV > 9) cellV = 9; cellV -= 33; // Should leave us a number of 0-9
if (cellV > 9)
cellV = 9;
OLED::drawBattery(cellV + 1); OLED::drawBattery(cellV + 1);
} else } else
OLED::drawSymbol(15); // Draw the DC Logo OLED::drawSymbol(15); // Draw the DC Logo
#else #else
// On TS80 we replace this symbol with the voltage we are operating on // On TS80 we replace this symbol with the voltage we are operating on
// If <9V then show single digit, if not show duals // If <9V then show single digit, if not show duals
uint8_t V = getInputVoltageX10(systemSettings.voltageDiv); uint8_t V = getInputVoltageX10(systemSettings.voltageDiv);
if (V % 10 >= 5) if (V % 10 >= 5)
V = V / 10 + 1; // round up V = V / 10 + 1;// round up
else else
V = V / 10; V = V / 10;
if (V >= 10) { if (V >= 10) {
int16_t xPos = OLED::getCursorX(); int16_t xPos = OLED::getCursorX();
OLED::setFont(1); OLED::setFont(1);
OLED::printNumber(1, 1); OLED::printNumber(1, 1);
OLED::setCursor(xPos, 8); OLED::setCursor(xPos, 8);
OLED::printNumber(V % 10, 1); OLED::printNumber(V % 10, 1);
OLED::setFont(0); OLED::setFont(0);
OLED::setCursor(xPos+12,0); // need to reset this as if we drew a wide char OLED::setCursor(xPos+12,0); // need to reset this as if we drew a wide char
} else { } else {
OLED::printNumber(V, 1); OLED::printNumber(V, 1);
} }
#endif #endif
} }
static void gui_solderingTempAdjust() { static void gui_solderingTempAdjust() {
@@ -309,7 +312,7 @@ static void gui_solderingTempAdjust() {
// exit // exit
return; return;
break; break;
case BUTTON_F_LONG: case BUTTON_B_LONG:
if (xTaskGetTickCount() - autoRepeatTimer + autoRepeatAcceleration > if (xTaskGetTickCount() - autoRepeatTimer + autoRepeatAcceleration >
PRESS_ACCEL_INTERVAL_MAX) { PRESS_ACCEL_INTERVAL_MAX) {
systemSettings.SolderingTemp -= 10; // sub 10 systemSettings.SolderingTemp -= 10; // sub 10
@@ -317,7 +320,7 @@ static void gui_solderingTempAdjust() {
autoRepeatAcceleration += PRESS_ACCEL_STEP; autoRepeatAcceleration += PRESS_ACCEL_STEP;
} }
break; break;
case BUTTON_B_LONG: case BUTTON_F_LONG:
if (xTaskGetTickCount() - autoRepeatTimer + autoRepeatAcceleration > if (xTaskGetTickCount() - autoRepeatTimer + autoRepeatAcceleration >
PRESS_ACCEL_INTERVAL_MAX) { PRESS_ACCEL_INTERVAL_MAX) {
systemSettings.SolderingTemp += 10; systemSettings.SolderingTemp += 10;
@@ -325,10 +328,10 @@ static void gui_solderingTempAdjust() {
autoRepeatAcceleration += PRESS_ACCEL_STEP; autoRepeatAcceleration += PRESS_ACCEL_STEP;
} }
break; break;
case BUTTON_B_SHORT: case BUTTON_F_SHORT:
systemSettings.SolderingTemp += 10; // add 10 systemSettings.SolderingTemp += 10; // add 10
break; break;
case BUTTON_F_SHORT: case BUTTON_B_SHORT:
systemSettings.SolderingTemp -= 10; // sub 10 systemSettings.SolderingTemp -= 10; // sub 10
break; break;
default: default:
@@ -355,7 +358,11 @@ static void gui_solderingTempAdjust() {
if (xTaskGetTickCount() - lastChange > 200) if (xTaskGetTickCount() - lastChange > 200)
return; // exit if user just doesn't press anything for a bit return; // exit if user just doesn't press anything for a bit
#ifdef MODEL_TS80
if (!OLED::getRotation())
#else
if (OLED::getRotation()) if (OLED::getRotation())
#endif
OLED::drawChar('-'); OLED::drawChar('-');
else else
OLED::drawChar('+'); OLED::drawChar('+');
@@ -367,7 +374,11 @@ static void gui_solderingTempAdjust() {
else else
OLED::drawSymbol(1); OLED::drawSymbol(1);
OLED::drawChar(' '); OLED::drawChar(' ');
#ifdef MODEL_TS80
if (!OLED::getRotation())
#else
if (OLED::getRotation()) if (OLED::getRotation())
#endif
OLED::drawChar('+'); OLED::drawChar('+');
else else
OLED::drawChar('-'); OLED::drawChar('-');
@@ -393,7 +404,8 @@ static int gui_SolderingSleepingMode() {
|| (xTaskGetTickCount() - lastButtonTime < 100)) || (xTaskGetTickCount() - lastButtonTime < 100))
return 0; // user moved or pressed a button, go back to soldering return 0; // user moved or pressed a button, go back to soldering
#ifdef MODEL_TS100 #ifdef MODEL_TS100
if (checkVoltageForExit()) return 1; // return non-zero on error if (checkVoltageForExit())
return 1; // return non-zero on error
#endif #endif
if (systemSettings.temperatureInF) { if (systemSettings.temperatureInF) {
currentlyActiveTemperatureTarget = ftoTipMeasurement( currentlyActiveTemperatureTarget = ftoTipMeasurement(
@@ -654,9 +666,9 @@ void showVersion(void) {
OLED::setCursor(0, 0); // Position the cursor at the 0,0 (top left) OLED::setCursor(0, 0); // Position the cursor at the 0,0 (top left)
OLED::setFont(1); // small font OLED::setFont(1); // small font
#ifdef MODEL_TS100 #ifdef MODEL_TS100
OLED::print((char *)"V2.06 TS100"); // Print version number OLED::print((char *) "V2.06 TS100"); // Print version number
#else #else
OLED::print((char *) "V2.06 TS80"); // Print version number OLED::print((char *) "V2.06 TS80"); // Print version number
#endif #endif
OLED::setCursor(0, 8); // second line OLED::setCursor(0, 8); // second line
OLED::print(HEADERS[screen]); OLED::print(HEADERS[screen]);
@@ -724,7 +736,7 @@ void startGUITask(void const *argument __unused) {
bool buttonLockout = false; bool buttonLockout = false;
bool tempOnDisplay = false; bool tempOnDisplay = false;
getTipRawTemp(2); // reset filter getTipRawTemp(2); // reset filter
OLED::setRotation(systemSettings.OrientationMode & 1); OLED::setRotation(!(systemSettings.OrientationMode & 1));
uint32_t ticks = xTaskGetTickCount(); uint32_t ticks = xTaskGetTickCount();
ticks += 400; // 4 seconds from now ticks += 400; // 4 seconds from now
while (xTaskGetTickCount() < ticks) { while (xTaskGetTickCount() < ticks) {
@@ -784,11 +796,11 @@ void startGUITask(void const *argument __unused) {
OLED::setFont(0); OLED::setFont(0);
OLED::displayOnOff(true); // turn lcd on OLED::displayOnOff(true); // turn lcd on
#ifdef MODEL_TS80 #ifdef MODEL_TS80
//Here we re-check for tip presence //Here we re-check for tip presence
if (idealQCVoltage < 90) if (idealQCVoltage < 90)
idealQCVoltage = calculateMaxVoltage(1, idealQCVoltage = calculateMaxVoltage(1,
systemSettings.cutoutSetting); // 1 means use filtered values rather than do its own systemSettings.cutoutSetting);// 1 means use filtered values rather than do its own
seekQC(idealQCVoltage,systemSettings.voltageDiv); seekQC(idealQCVoltage,systemSettings.voltageDiv);
#endif #endif
gui_solderingMode(0); // enter soldering mode gui_solderingMode(0); // enter soldering mode
buttonLockout = true; buttonLockout = true;
@@ -850,7 +862,7 @@ void startGUITask(void const *argument __unused) {
#ifdef MODEL_TS80 #ifdef MODEL_TS80
if (!OLED::getRotation()) { if (!OLED::getRotation()) {
#else #else
if (OLED::getRotation()) { if (OLED::getRotation()) {
#endif #endif
OLED::drawArea(12, 0, 84, 16, idleScreenBG); OLED::drawArea(12, 0, 84, 16, idleScreenBG);
OLED::setCursor(0, 0); OLED::setCursor(0, 0);
@@ -869,7 +881,7 @@ void startGUITask(void const *argument __unused) {
// draw temp over the start soldering button // draw temp over the start soldering button
// Location changes on screen rotation // Location changes on screen rotation
#ifdef MODEL_TS80 #ifdef MODEL_TS80
if (!OLED::getRotation()) { if (!OLED::getRotation()) {
#else #else
if (OLED::getRotation()) { if (OLED::getRotation()) {
#endif #endif
@@ -908,11 +920,11 @@ void startPIDTask(void const *argument __unused) {
*/ */
setTipPWM(0); // disable the output driver if the output is set to be off setTipPWM(0); // disable the output driver if the output is set to be off
#ifdef MODEL_TS100 #ifdef MODEL_TS100
for (uint8_t i = 0; i < 50; i++) { for (uint8_t i = 0; i < 50; i++) {
osDelay(10); osDelay(10);
getTipRawTemp(1); // cycle up the tip temp filter getTipRawTemp(1); // cycle up the tip temp filter
HAL_IWDG_Refresh(&hiwdg); HAL_IWDG_Refresh(&hiwdg);
} }
#else #else
// On the TS80 we can measure the tip resistance before cycling the filter a // On the TS80 we can measure the tip resistance before cycling the filter a
// bit // bit
@@ -1009,20 +1021,20 @@ void startPIDTask(void const *argument __unused) {
} }
#define MOVFilter 8 #define MOVFilter 8
void startMOVTask(void const *argument __unused) { void startMOVTask(void const *argument __unused) {
OLED::setRotation(false); OLED::setRotation(true);
#ifdef MODEL_TS80 #ifdef MODEL_TS80
startQC(systemSettings.voltageDiv); startQC(systemSettings.voltageDiv);
while (idealQCVoltage == 0) while (idealQCVoltage == 0)
osDelay(20); // To ensure we return after idealQCVoltage is setup osDelay(20); // To ensure we return after idealQCVoltage is setup
seekQC(idealQCVoltage,systemSettings.voltageDiv); // this will move the QC output to the preferred voltage to start with seekQC(idealQCVoltage,systemSettings.voltageDiv);// this will move the QC output to the preferred voltage to start with
#else #else
osDelay(250); // wait for accelerometer to stabilize osDelay(250); // wait for accelerometer to stabilize
#endif #endif
OLED::setRotation(systemSettings.OrientationMode & 1); OLED::setRotation(!(systemSettings.OrientationMode & 1));
lastMovementTime = 0; lastMovementTime = 0;
int16_t datax[MOVFilter] = { 0 }; int16_t datax[MOVFilter] = { 0 };
int16_t datay[MOVFilter] = { 0 }; int16_t datay[MOVFilter] = { 0 };
@@ -1102,9 +1114,9 @@ void startMOVTask(void const *argument __unused) {
osDelay(100); // Slow down update rate osDelay(100); // Slow down update rate
#ifdef MODEL_TS80 #ifdef MODEL_TS80
if (currentlyActiveTemperatureTarget) { if (currentlyActiveTemperatureTarget) {
seekQC(idealQCVoltage,systemSettings.voltageDiv); // Run the QC seek again to try and compensate for cable V drop seekQC(idealQCVoltage,systemSettings.voltageDiv); // Run the QC seek again to try and compensate for cable V drop
} }
#endif #endif
} }
} }

2
workspace/TS100A/.cproject
View File

@@ -50,6 +50,7 @@
<tool id="com.atollic.truestudio.exe.release.toolchain.gcc.45651038" name="C Compiler" superClass="com.atollic.truestudio.exe.release.toolchain.gcc"> <tool id="com.atollic.truestudio.exe.release.toolchain.gcc.45651038" name="C Compiler" superClass="com.atollic.truestudio.exe.release.toolchain.gcc">
<option id="com.atollic.truestudio.gcc.symbols.defined.1383071182" name="Defined symbols" superClass="com.atollic.truestudio.gcc.symbols.defined" useByScannerDiscovery="false" valueType="definedSymbols"> <option id="com.atollic.truestudio.gcc.symbols.defined.1383071182" name="Defined symbols" superClass="com.atollic.truestudio.gcc.symbols.defined" useByScannerDiscovery="false" valueType="definedSymbols">
<listOptionValue builtIn="false" value="STM32F103T8Ux"/> <listOptionValue builtIn="false" value="STM32F103T8Ux"/>
<listOptionValue builtIn="false" value="MODEL_TS80"/>
<listOptionValue builtIn="false" value="STM32F1"/> <listOptionValue builtIn="false" value="STM32F1"/>
<listOptionValue builtIn="false" value="STM32"/> <listOptionValue builtIn="false" value="STM32"/>
<listOptionValue builtIn="false" value="USE_HAL_DRIVER"/> <listOptionValue builtIn="false" value="USE_HAL_DRIVER"/>
@@ -90,6 +91,7 @@
<tool id="com.atollic.truestudio.exe.release.toolchain.gpp.93636755" name="C++ Compiler" superClass="com.atollic.truestudio.exe.release.toolchain.gpp"> <tool id="com.atollic.truestudio.exe.release.toolchain.gpp.93636755" name="C++ Compiler" superClass="com.atollic.truestudio.exe.release.toolchain.gpp">
<option id="com.atollic.truestudio.gpp.symbols.defined.552082963" name="Defined symbols" superClass="com.atollic.truestudio.gpp.symbols.defined" useByScannerDiscovery="false" valueType="definedSymbols"> <option id="com.atollic.truestudio.gpp.symbols.defined.552082963" name="Defined symbols" superClass="com.atollic.truestudio.gpp.symbols.defined" useByScannerDiscovery="false" valueType="definedSymbols">
<listOptionValue builtIn="false" value="STM32F103T8Ux"/> <listOptionValue builtIn="false" value="STM32F103T8Ux"/>
<listOptionValue builtIn="false" value="MODEL_TS80"/>
<listOptionValue builtIn="false" value="STM32F1"/> <listOptionValue builtIn="false" value="STM32F1"/>
<listOptionValue builtIn="false" value="STM32"/> <listOptionValue builtIn="false" value="STM32"/>
<listOptionValue builtIn="false" value="USE_HAL_DRIVER"/> <listOptionValue builtIn="false" value="USE_HAL_DRIVER"/>

2
workspace/TS100A/.settings/language.settings.xml
View File

@@ -4,7 +4,7 @@
<extension point="org.eclipse.cdt.core.LanguageSettingsProvider"> <extension point="org.eclipse.cdt.core.LanguageSettingsProvider">
<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/> <provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/> <provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
<provider class="com.atollic.truestudio.mbs.GCCSpecsDetectorAtollicArm" console="false" env-hash="100391687907069452" id="com.atollic.truestudio.mbs.provider" keep-relative-paths="false" name="Atollic ARM Tools Language Settings" parameter="${COMMAND} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true"> <provider class="com.atollic.truestudio.mbs.GCCSpecsDetectorAtollicArm" console="false" env-hash="523641172746736302" id="com.atollic.truestudio.mbs.provider" keep-relative-paths="false" name="Atollic ARM Tools Language Settings" parameter="${COMMAND} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
<language-scope id="org.eclipse.cdt.core.gcc"/> <language-scope id="org.eclipse.cdt.core.gcc"/>
<language-scope id="org.eclipse.cdt.core.g++"/> <language-scope id="org.eclipse.cdt.core.g++"/>
</provider> </provider>